scholarly journals IWV retrieval from ship-borne GNSS receiver in the framework of the MAP-IO project

2021 ◽  
Author(s):  
Pierre Bosser ◽  
Joël Van Ballen ◽  
Olivier Bousquet
Keyword(s):  
Marine Biology ◽  
Weather Prediction ◽  
Vertical Component ◽  
Satellite System ◽  
Sea Surface Height ◽  
Sea Surface ◽  
Gnss Receiver ◽  
Height Determination ◽  
Global Navigation Satellite ◽  
Height Model

<p>In the framework of the research project “Marion Dufresne Atmospheric Program – Indian Ocean” (MAP-IO), which is aiming at collecting long-term atmospheric and marine biology observations in the under-instrumented Indian and Austral Oceans, a Global Navigation Satellite System (GNSS) receiver was installed on the research vessel (RV) Marion Dufresne in October 2020 to describe, and monitor, global moisture changes in these areas. GNSS raw data are recorded continuously and used to retrieve integrated water vapor contents (IWV) along the RV route.</p><p>After a data quality check that confirmed that a wise choice of location of the GNSS antenna on the RV is crucial to avoid mask, signal reflection and interference from other instruments that may degrade IWV retrieval, a first assessment of the GNSS analysis performances was carried out by comparing the vertical component of the estimated positions to sea surface height model. The differences are on the order of 20 to 30 cm; they are consistent with both the error budget for sea surface height determination using GNSS and the sea surface height model formal errors.</p><p>An evaluation of GNSS-derived IWV was conducted using IWV estimates from the ECMWF fifth ReAnalysis (ERA5) and ground-based GNSS reference stations located nearby the tracks of RV Marion Dufresne. Preliminary analyses show encouraging results with a mean root mean square error of ~2-3 kg m<sup>-</sup><sup>2</sup> between ERA5 and GNSS-derived IWV. The use of ultra-rapid GNSS orbit and clock product was also investigated to assess the performance of near real-time GNSS-derived IWV estimation for numerical weather prediction purposes.</p>

scholarly journals Measurement of the Sea Surface Height with Airborne GNSS Reflectometry and Delay Bias Calibration

2021 ◽  
Vol 13 (15) ◽  
pp. 3014
Author(s):  
Feng Wang ◽  
Dongkai Yang ◽  
Guodong Zhang ◽  
Jin Xing ◽  
Bo Zhang ◽  
...  
Keyword(s):  
Wind Speed ◽  
Arrival Time ◽  
Elevation Angle ◽  
Satellite System ◽  
Sea Surface Height ◽  
Antenna Pattern ◽  
Sea Surface ◽  
Observation Method ◽  
Global Navigation Satellite ◽  
The Impact

Sea surface height can be measured with the delay between reflected and direct global navigation satellite system (GNSS) signals. The arrival time of a feature point, such as the waveform peak, the peak of the derivative waveform, and the fraction of the peak waveform is not the true arrival time of the specular signal; there is a bias between them. This paper aims to analyze and calibrate the bias to improve the accuracy of sea surface height measured by using the reflected signals of GPS CA, Galileo E1b and BeiDou B1I. First, the influencing factors of the delay bias, including the elevation angle, receiver height, wind speed, pseudorandom noise (PRN) code of GPS CA, Galileo E1b and BeiDou B1I, and the down-looking antenna pattern are explored based on the Z-V model. The results show that (1) with increasing elevation angle, receiver height, and wind speed, the delay bias tends to decrease; (2) the impact of the PRN code is uncoupled from the elevation angle, receiver height, and wind speed, so the delay biases of Galileo E1b and BeiDou B1I can be derived from that of GPS CA by multiplication by the constants 0.32 and 0.54, respectively; and (3) the influence of the down-looking antenna pattern on the delay bias is lower than 1 m, which is less than that of other factors; hence, the effect of the down-looking antenna pattern is ignored in this paper. Second, an analytical model and a neural network are proposed based on the assumption that the influence of all factors on the delay bias are uncoupled and coupled, respectively, to calibrate the delay bias. The results of the simulation and experiment show that compared to the meter-level bias before the calibration, the calibrated bias decreases the decimeter level. Based on the fact that the specular points of several satellites are visible to the down-looking antenna, the multi-observation method is proposed to calibrate the bias for the case of unknown wind speed, and the same calibration results can be obtained when the proper combination of satellites is selected.

scholarly journals Use of Microwave Radiances from Metop-C and Fengyun-3 C/D Satellites for a Northern European Limited-area Data Assimilation System

2021 ◽  
Author(s):  
Magnus Lindskog ◽  
Adam Dybbroe ◽  
Roger Randriamampianina
Keyword(s):  
Data Assimilation ◽  
Positive Impact ◽  
Weather Prediction ◽  
Implementation Process ◽  
Satellite System ◽  
Limited Area ◽  
Global Navigation Satellite ◽  
Microwave Radiances ◽  
Data Assimilation System ◽  
Assimilation System

AbstractMetCoOp is a Nordic collaboration on operational Numerical Weather Prediction based on a common limited-area km-scale ensemble system. The initial states are produced using a 3-dimensional variational data assimilation scheme utilizing a large amount of observations from conventional in-situ measurements, weather radars, global navigation satellite system, advanced scatterometer data and satellite radiances from various satellite platforms. A version of the forecasting system which is aimed for future operations has been prepared for an enhanced assimilation of microwave radiances. This enhanced data assimilation system will use radiances from the Microwave Humidity Sounder, the Advanced Microwave Sounding Unit-A and the Micro-Wave Humidity Sounder-2 instruments on-board the Metop-C and Fengyun-3 C/D polar orbiting satellites. The implementation process includes channel selection, set-up of an adaptive bias correction procedure, and careful monitoring of data usage and quality control of observations. The benefit of the additional microwave observations in terms of data coverage and impact on analyses, as derived using the degree of freedom of signal approach, is demonstrated. A positive impact on forecast quality is shown, and the effect on the precipitation for a case study is examined. Finally, the role of enhanced data assimilation techniques and adaptions towards nowcasting are discussed.

scholarly journals HEIGHT DETERMINATION TECHNIQUES FOR THE NEXT NATIONAL HEIGHT SYSTEM OF FINLAND - A CASE STUDY

2015 ◽  
Vol 41 (4) ◽  
pp. 145-155
Author(s):  
Timo Saari ◽  
Markku Poutanen ◽  
Veikko Saaranen ◽  
Harri Kaartinen ◽  
Antero Kukko ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Pilot Project ◽  
Satellite System ◽  
Reference Station ◽  
Virtual Reference ◽  
Precise Levelling ◽  
Height Determination ◽  
Weak Points ◽  
Global Navigation Satellite

Precise levelling is known for its accuracy and reliability in height determination, but the process itself is slow, laborious and expensive. We have started a project to study methods for height determination that could decrease the creation time of national height systems without losing the accuracy and reliability that is needed for them. In the pilot project described here, we study some of the alternative techniques with a pilot field test where we compared them with the precise levelling. The purpose of the test is not to evaluate the mutual superiority or suitability of the techniques, but to establish the background for a larger test and to find strong and weak points of each technique. The techniques chosen for this study were precise levelling, Mobile Laser Scanning (MLS) and Global Navigation Satellite System (GNSS) levelling, which included static Global Positioning System (GPS) and Virtual Reference Station (VRS) measurements. This research highlighted the differences of the studied techniques and gave insights about the framework and procedure for the later experiments. The research will continue in a larger scale, where the suitability of the techniques regarding the height systems is to be determined.

Study the Effect of Radio Interference of the EHV Transmission Line on GNSS Signals

2013 ◽  
Vol 805-806 ◽  
pp. 851-854
Author(s):  
Zhi Ge Jia ◽  
Zhao Sheng Nie ◽  
Wei Wang ◽  
Xiao Guan ◽  
Di Jin Wang
Keyword(s):  
Transmission Line ◽  
Transmission Lines ◽  
Internal Noise ◽  
Field Testing ◽  
Satellite System ◽  
Field Analysis ◽  
Radio Interference ◽  
Gnss Receiver ◽  
Global Navigation Satellite ◽  
Gnss Data

This work describes the field testing process of Global Navigation Satellite System (GNSS) receiver under 220KV, 500KV UHV transmission line and standard calibration field. Analysis for GNSS data results shows that the radio interference generated by EHV transmission lines have no effect on GNSS receiver internal noise levels and valid GNSS observation rate. Within 50 meters of the EHV transmission lines, the multi-path effects (mp1 and mp2 value) significantly exceeded the normal range and becomes larger with the increase of the voltage .outside 50 meters of the EHV transmission line, the multi-path effects have almost no effect on the high-precision GNSS observations.

Performance Assessment of GNSS-R Polarimetric Observations for Sea Level Monitoring

2021 ◽  
Author(s):  
Mahmoud Rajabi ◽  
Mstafa Hoseini ◽  
Hossein Nahavandchi ◽  
Maximilian Semmling ◽  
Markus Ramatschi ◽  
...  
Keyword(s):  
Time Series ◽  
Circular Polarization ◽  
Sea Level ◽  
Tide Gauge ◽  
Satellite System ◽  
Sea Surface ◽  
Analysis Tool ◽  
Lower Accuracy ◽  
Coastal Sea ◽  
Global Navigation Satellite

<p>Determination and monitoring of the mean sea level especially in the coastal areas are essential, environmentally, and as a vertical datum. Ground-based Global Navigation Satellite System Reflectometry (GNSS-R) is an innovative way which is becoming a reliable alternative for coastal sea-level altimetry. Comparing to traditional tide gauges, GNSS-R can offer different parameters of sea surface, one of which is the sea level. The measurements derived from this technique can cover wider areas of the sea surface in contrast to point-wise observations of a tide gauge.  </p><p>We use long-term ground-based GNSS-R observations to estimate sea level. The dataset includes one-year data from January to December 2016. The data was collected by a coastal GNSS-R experiment at the Onsala space observatory in Sweden. The experiment utilizes three antennas with different polarization designs and orientations. The setup has one up-looking, and two sea-looking antennas at about 3 meters above the sea surface level. The up-looking antenna is Right-Handed Circular Polarization (RHCP). The sea-looking antennas with RHCP and Left-Handed Circular Polarization (LHCP) are used for capturing sea reflected Global Positioning System (GPS) signals. A dedicated reflectometry receiver (GORS type) provides In-phase and Quadrature (I/Q) correlation sums for each antenna based on the captured interferometric signal. The generated time series of I/Q samples from different satellites are analyzed using the Least Squares Harmonic Estimation (LSHE) method. This method is a multivariate analysis tool which can flexibly retrieve the frequencies of a time series regardless of possible gaps or unevenly spaced sampling. The interferometric frequency, which is related to the reflection geometry and sea level, is obtained by LSHE with a temporal resolution of 15 minutes. The sea level is calculated based on this frequency in six modes from the three antennas in GPS L1 and L2 signals.</p><p>Our investigation shows that the sea-looking antennas perform better compared to the up-looking antenna. The highest accuracy is achieved using the sea-looking LHCP antenna and GPS L1 signal. The annual Root Mean Square Error (RMSE) of 15-min GNSS-R water level time series compared to tide gauge observations is 3.7 (L1) and 5.2 (L2) cm for sea-looking LHCP, 5.8 (L1) and 9.1 (L2) cm for sea-looking RHCP, 6.2 (L1) and 8.5 (L2) cm for up-looking RHCP. It is worth noting that the GPS IIR block satellites show lower accuracy due to the lack of L2C code. Therefore, the L2 observations from this block are eliminated.</p>

scholarly journals Determination of Conversion Constant between Lagos Datum and Niger Delta Mean Lower Low Water Datum and their Horizontal and Vertical Accuracy Standards using GNSS Observations

2018 ◽  
Vol 2 (1) ◽  
pp. 56-68
Author(s):  
M. O. Ehigiator ◽  
S. O. Oladosu
Keyword(s):  
Niger Delta ◽  
Satellite System ◽  
Constant Factor ◽  
Common Mean ◽  
Height Determination ◽  
The Mean ◽  
Vertical Accuracy ◽  
Global Navigation Satellite ◽  
Gnss Observations

With the use of Global Navigation Satellite System (GNSS) technology, it is now possible to determine the position of points in 3D coordinates systems. Lagos datum is the most common Mean Sea Level used in most parts of Nigeria. In Niger Delta, for instance Warri and its environs, the most commonly used datum for height determination is the Mean Lower Low Water Datum. It then becomes necessary to determine a constant factor for conversion between the two datum when the need arises as both are often encountered during Geomatics Engineering field operations. In this paper, the constant to be applied in converting between both datum was determined. The constant was found to be 17.79m. The horizontal and vertical accuracy standard was also determined as well as the stack maps.

scholarly journals The FengYun-3C radio occultation sounder GNOS: a review of the mission and its early results and science applications

2018 ◽  
Vol 11 (10) ◽  
pp. 5797-5811 ◽  
Author(s):  
Yueqiang Sun ◽  
Weihua Bai ◽  
Congliang Liu ◽  
Yan Liu ◽  
Qifei Du ◽  
...  
Keyword(s):  
Quality Evaluation ◽  
Radio Occultation ◽  
Global Climate ◽  
Weather Prediction ◽  
Satellite System ◽  
Navigation Satellite ◽  
Neutral Atmosphere ◽  
Scientific Applications ◽  
Early Results ◽  
Global Navigation Satellite

Abstract. The Global Navigation Satellite System (GNSS) Occultation Sounder (GNOS) is one of the new-generation payloads on board the Chinese FengYun 3 (FY-3) series of operational meteorological satellites for sounding the Earth's neutral atmosphere and ionosphere. FY-3C GNOS, on board the FY-3 series C satellite launched in September 2013, was designed to acquire setting and rising radio occultation (RO) data by using GNSS signals from both the Chinese BeiDou Navigation Satellite System (BDS) and the US Global Positioning System (GPS). So far, the GNOS measurements and atmospheric and ionospheric data products have been validated and evaluated and then been used for atmosphere- and ionosphere-related scientific applications. This paper reviews the FY-3C GNOS instrument, RO data processing, data quality evaluation, and preliminary research applications according to the state-of-the-art status of the FY-3C GNOS mission and related publications. The reviewed data validation and application results demonstrate that the FY-3C GNOS mission can provide accurate and precise atmospheric and ionospheric GNSS (i.e., GPS and BDS) RO profiles for numerical weather prediction (NWP), global climate monitoring (GCM), and space weather research (SWR). The performance of the FY-3C GNOS product quality evaluation and scientific applications establishes confidence that the GNOS data from the series of FY-3 satellites will provide important contributions to NWP, GCM, and SWR scientific communities.

scholarly journals Space-Borne GNSS-R Ionospheric Delay Error Elimination by Optimal Spatial Filtering

Sensors ◽  
2020 ◽  
Vol 20 (19) ◽  
pp. 5535
Author(s):  
Qiuyang Zhang ◽  
Yang Liu ◽  
Junming Xia
Keyword(s):  
Remote Sensing ◽  
Spatial Filtering ◽  
Satellite System ◽  
Sea Surface ◽  
Statistical Probability ◽  
Sensing Technology ◽  
Error Elimination ◽  
Absolute Bias ◽  
Global Navigation Satellite ◽  
Orbital Data

Global Navigation Satellite System Reflectometry (GNSS-R) technology is a new and promising remote sensing technology, especially satellite-based GNSS-R remote sensing, which has broad application prospects. In this work, the ionospheric impacts on space-borne GNSS-R sea surface altimetry were investigated. An analysis of optimal values for spatial filtering to remove ionospheric delays in space-borne GNSS-R altimetry was conducted. Considering that there are few satellite-borne GNSS-R orbit observations to date, simulated high-resolution space-borne GNSS-R orbital data were used for a comprehensive global and applicable study. The curves of absolute bias in relation to the bilateral filtering points were verified to achieve the minimum absolute bias. The optimal filtering points were evaluated in both statistical probability density and quantile analysis to show the reliability of the selected values. The proposed studies are helpful and valuable for the future implementation of high-accuracy space-borne GNSS-R sea surface altimetry.

scholarly journals Results of the GNSS receiver experiment OCAM-G on Ariane-5 flight VA 219

2016 ◽  
Vol 231 (6) ◽  
pp. 1100-1114 ◽  
Author(s):  
André Hauschild ◽  
Markus Markgraf ◽  
Oliver Montenbruck ◽  
Horst Pfeuffer ◽  
Elie Dawidowicz ◽  
...  
Keyword(s):  
French Guiana ◽  
Satellite System ◽  
Navigation Satellite ◽  
Navigation Solution ◽  
Gnss Receiver ◽  
Upper Stage ◽  
Lift Off ◽  
Global Navigation Satellite ◽  
Navigation Accuracy ◽  
First Time

The fifth Automated Transfer Vehicle was launched on 29 July 2014 with Ariane-5 flight VA 219 into orbit from Kourou, French Guiana. For the first time, the ascent of an Ariane rocket was independently tracked with a Global Navigation Satellite System (GNSS) receiver on this flight. The GNSS receiver experiment OCAM-G was mounted on the upper stage of the rocket. Its receivers tracked the trajectory of the Ariane-5 from lift-off until after the separation of the Automated Transfer Vehicle. This article introduces the design of the experiment and presents an analysis of the data gathered during the flight with respect to the GNSS tracking status, availability of navigation solution, and navigation accuracy.

scholarly journals Evaluation of Modeling Water-Vapor-Weighted Mean Tropospheric Temperature for GNSS-Integrated Water Vapor Estimates in Brazil

2014 ◽  
Vol 53 (3) ◽  
pp. 715-730 ◽  
Author(s):  
Luiz F. Sapucci
Keyword(s):  
Water Vapor ◽  
Weather Prediction ◽  
Satellite System ◽  
The Other ◽  
Tropospheric Temperature ◽  
Regional Models ◽  
Weighted Mean ◽  
Multivariate Statistical ◽  
Global Models ◽  
Global Navigation Satellite

AbstractMeteorological application of Global Navigation Satellite System (GNSS) data over Brazil has increased significantly in recent years, motivated by the significant amount of investment from research agencies. Several projects have, among their principal objectives, the monitoring of humidity over Brazilian territory. These research projects require integrated water vapor (IWV) values with maximum quality, and, accordingly, appropriate data from the installed meteorological stations, together with the GNSS antennas, have been used. The model that is applied to estimate the water-vapor-weighted mean tropospheric temperature (Tm) is a source of uncertainty in the estimate of IWV values using the ground-based GNSS receivers in Brazil. Two global models and one algorithm for Tm, developed through the use of radiosondes, numerical weather prediction products, and 40-yr ECMWF Re-Analysis (ERA-40), as well as two regional models, were evaluated using a dataset of ~78 000 radiosonde profiles collected at 22 stations in Brazil during a 12-yr period (1999–2010). The regional models (denoted the Brazilian and regional models) were developed with the use of multivariate statistical analysis using ~90 000 radiosonde profiles launched at 12 stations over a 32-yr period (1961–93). The main conclusion is that the Brazilian model and two global models exhibit similar performance if the complete dataset and the entire period are taken into consideration. However, for seasonal and local variations of the Tm values, the Brazilian model was better than the other two models for most stations. The Tm values from ERA-40 present no bias, but their scatter is larger than that in the other models.

Sign in / Sign up

Export Citation Format

Share Document