scholarly journals Correcting the radar rainfall forcing of a hydrological model with data assimilation: application to flood forecasting in the Lez catchment in Southern France

2012 ◽  
Vol 16 (11) ◽  
pp. 4247-4264 ◽  
Author(s):  
E. Harader ◽  
V. Borrell-Estupina ◽  
S. Ricci ◽  
M. Coustau ◽  
O. Thual ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Hydrological Model ◽  
Assimilation Efficiency ◽  
Flood Forecasting ◽  
Rain Gauge ◽  
Rainfall Data ◽  
Operational Environment ◽  
Radar Rainfall ◽  
Flood Peak ◽  
Orographic Rainfall

Abstract. The present study explores the application of a data assimilation (DA) procedure to correct the radar rainfall inputs of an event-based, distributed, parsimonious hydrological model. An extended Kalman filter algorithm was built on top of a rainfall-runoff model in order to assimilate discharge observations at the catchment outlet. This work focuses primarily on the uncertainty in the rainfall data and considers this as the principal source of error in the simulated discharges, neglecting simplifications in the hydrological model structure and poor knowledge of catchment physics. The study site is the 114 km2 Lez catchment near Montpellier, France. This catchment is subject to heavy orographic rainfall and characterised by a karstic geology, leading to flash flooding events. The hydrological model uses a derived version of the SCS method, combined with a Lag and Route transfer function. Because the radar rainfall input to the model depends on geographical features and cloud structures, it is particularly uncertain and results in significant errors in the simulated discharges. This study seeks to demonstrate that a simple DA algorithm is capable of rendering radar rainfall suitable for hydrological forecasting. To test this hypothesis, the DA analysis was applied to estimate a constant hyetograph correction to each of 19 flood events. The analysis was carried in two different modes: by assimilating observations at all available time steps, referred to here as reanalysis mode, and by using only observations up to 3 h before the flood peak to mimic an operational environment, referred to as pseudo-forecast mode. In reanalysis mode, the resulting correction of the radar rainfall data was then compared to the mean field bias (MFB), a corrective coefficient determined using rain gauge measurements. It was shown that the radar rainfall corrected using DA leads to improved discharge simulations and Nash-Sutcliffe efficiency criteria compared to the MFB correction. In pseudo-forecast mode, the reduction of the uncertainty in the rainfall data leads to a reduction of the error in the simulated discharge, but uncertainty from the model parameterisation diminishes data assimilation efficiency. While the DA algorithm used is this study is effective in correcting uncertain radar rainfall, model uncertainty remains an important challenge for flood forecasting within the Lez catchment.

scholarly journals Correcting the radar rainfall forcing of a hydrological model with data assimilation: application to flood forecasting in the Lez Catchment in Southern France

2012 ◽  
Vol 9 (3) ◽  
pp. 3527-3579 ◽  
Author(s):  
E. Harader ◽  
V. Borrell Estupina ◽  
S. Ricci ◽  
M. Coustau ◽  
O. Thual ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Hydrological Model ◽  
Mean Field ◽  
Rainfall Data ◽  
Radar Rainfall ◽  
Orographic Rainfall ◽  
Field Bias ◽  
Rainfall Runoff Model ◽  
Event Based ◽  
Flooding Events

Abstract. The present study explores the application of a data assimilation (DA) procedure to correct the radar rainfall inputs of an event-based, distributed, parsimonious hydrological model. A simplified Kalman filter algorithm was built on top of a rainfall-runoff model in order to assimilate discharge observations at the catchment outlet. The study site is the 114 km2 Lez Catchment near Montpellier, France. This catchment is subject to heavy orographic rainfall and characterized by a karstic geology, leading to flash flooding events. The hydrological model uses a derived version of the SCS method, combined with a Lag and Route transfer function. Because it depends on geographical features and cloud structures, the radar rainfall input to the model is particularily uncertain and results in significant errors in the simulated discharges. The DA analysis was applied to estimate a constant correction to each event hyetogram. The analysis was carried out for 19 events, in two different modes: re-analysis and pseudo-forecast. In both cases, it was shown that the reduction of the uncertainty in the rainfall data leads to a reduction of the error in the simulated discharge. The resulting correction of the radar rainfall data was then compared to the mean field bias (MFB), a corrective coefficient determined using ground rainfall measurements, which are more accurate than radar but have a decreased spatial resolution. It was shown that the radar rainfall corrected using DA leads to improved discharge simulations and Nash criteria compared to the MFB correction.

scholarly journals Influence of Rainfall Data with Different Spatial Resolutions on Flood Forecasting Reliability

10.29007/74bp ◽  
2018 ◽  
Author(s):  
Mamoru Miyamoto ◽  
Kazuhiro Matsumoto
Keyword(s):  
River Discharge ◽  
Hydrological Model ◽  
Radar Data ◽  
Flood Forecasting ◽  
Rainfall Data ◽  
Error Assessment ◽  
Distributed Hydrological Model ◽  
Radar Rainfall ◽  
Convergence Results ◽  
Gauge Data

Recent advancements in precipitation observation technology make it possible to precisely describe the intensity and temporal-spatial distribution of heavy rainfall, which can cause severe floods and inundations. Such technologies have also increased the accuracy of flood forecasting. However, error factors in flood forecasting remain to be solved, originating in not only input data but also model structure and calibration. Thus, this study focused on convergence results of errors in parameter optimization of the PWRI Distributed Hydrological Model and the reproducibility of river discharge. The reliability of ground-gauge and C-band-radar rainfall is compared in terms of flood forecasting under the condition of the minimum error due to calibration. Although the convergence results showed that C-band radar rainfall was superior to ground gauge rainfall, both were equally effective in reproducing river discharge with a high NSE of 0.9 at a station with error assessment. On the other hand, the reproducibility of river discharge with C-band radar data was highly superior to that with ground gauge data at a station without error assessment. This indicates that grid-based high resolution rainfall data is necessary for basin-wide flood forecasting.

scholarly journals Benefits and limitations of data assimilation for discharge forecasting using an event-based rainfall–runoff model

2013 ◽  
Vol 13 (3) ◽  
pp. 583-596 ◽  
Author(s):  
M. Coustau ◽  
S. Ricci ◽  
V. Borrell-Estupina ◽  
C. Bouvier ◽  
O. Thual
Keyword(s):  
Data Assimilation ◽  
Hydrological Model ◽  
Peak Discharge ◽  
State Variables ◽  
Rainfall Runoff ◽  
Discharge Data ◽  
Southern France ◽  
Flood Peak ◽  
Event Based ◽  
The Impact

Abstract. Mediterranean catchments in southern France are threatened by potentially devastating fast floods which are difficult to anticipate. In order to improve the skill of rainfall-runoff models in predicting such flash floods, hydrologists use data assimilation techniques to provide real-time updates of the model using observational data. This approach seeks to reduce the uncertainties present in different components of the hydrological model (forcing, parameters or state variables) in order to minimize the error in simulated discharges. This article presents a data assimilation procedure, the best linear unbiased estimator (BLUE), used with the goal of improving the peak discharge predictions generated by an event-based hydrological model Soil Conservation Service lag and route (SCS-LR). For a given prediction date, selected model inputs are corrected by assimilating discharge data observed at the basin outlet. This study is conducted on the Lez Mediterranean basin in southern France. The key objectives of this article are (i) to select the parameter(s) which allow for the most efficient and reliable correction of the simulated discharges, (ii) to demonstrate the impact of the correction of the initial condition upon simulated discharges, and (iii) to identify and understand conditions in which this technique fails to improve the forecast skill. The correction of the initial moisture deficit of the soil reservoir proves to be the most efficient control parameter for adjusting the peak discharge. Using data assimilation, this correction leads to an average of 12% improvement in the flood peak magnitude forecast in 75% of cases. The investigation of the other 25% of cases points out a number of precautions for the appropriate use of this data assimilation procedure.

scholarly journals Optimal Rainfall Estimation by Considering Elevation in the Han River Basin, South Korea

2013 ◽  
Vol 52 (4) ◽  
pp. 802-818 ◽  
Author(s):  
Seong-Sim Yoon ◽  
Deg-Hyo Bae
Keyword(s):  
South Korea ◽  
River Basin ◽  
Flood Control ◽  
Rainfall Data ◽  
Spatiotemporal Variability ◽  
Radar Rainfall ◽  
Mountainous Regions ◽  
Han River ◽  
Orographic Rainfall ◽  
Han River Basin

AbstractMore than 70% of South Korea has mountainous terrain, which leads to significant spatiotemporal variability of rainfall. The country is exposed to the risk of flash floods owing to orographic rainfall. Rainfall observations are important in mountainous regions because flood control measures depend strongly on rainfall data. In particular, radar rainfall data are useful in these regions because of the limitations of rain gauges. However, radar rainfall data include errors despite the development of improved estimation techniques for their calculation. Further, the radar does not provide accurate data during heavy rainfall in mountainous areas. This study presents a radar rainfall adjustment method that considers the elevation in mountainous regions. Gauge rainfall and radar rainfall field data are modified by using standardized ordinary cokriging considering the elevation, and the conditional merging technique is used for combining the two types of data. For evaluating the proposed technique, the Han River basin was selected; a high correlation between rainfall and elevation can be seen in this basin. Further, the proposed technique was compared with the mean field bias and original conditional merging techniques. Comparison with kriged rainfall showed that the proposed method has a lesser tendency to oversmooth the rainfall distribution when compared with the other methods, and the optimal mean areal rainfall is very similar to the value obtained using gauges. It reveals that the proposed method can be applied to an area with significantly varying elevation, such as the Han River basin, to obtain radar rainfall data of high accuracy.

scholarly journals Improved input to distributed hydrologic model in areas with sparse subdaily rainfall data using multivariate daily rainfall disaggregation

2018 ◽  
Vol 20 (4) ◽  
pp. 784-797 ◽  
Author(s):  
Marija Ivković ◽  
Andrijana Todorović ◽  
Jasna Plavšić
Keyword(s):  
Daily Rainfall ◽  
Flood Forecasting ◽  
Rain Gauge ◽  
Hydrologic Model ◽  
Rainfall Data ◽  
Rain Gauges ◽  
Observation Network ◽  
Hourly Rainfall ◽  
Extreme Flood ◽  
Flood Simulations

Abstract Flood forecasting relies on good quality of observed and forecasted rainfall. In Serbia, the recording rain gauge network is sparse and rainfall data mainly come from dense non-recording rain gauges. This is not beneficial for flood forecasting in smaller catchments and short-duration events, when hydrologic models operating on subdaily scale are applied. Moreover, differences in rainfall amounts from two types of gauges can be considerable, which is common in operational hydrological practice. This paper examines the possibility of including daily rainfall data from dense observation networks in flood forecasting based on subdaily data, using the extreme flood event in the Kolubara catchment in May 2014 as a case study. Daily rainfall from a dense observation network is disaggregated to hourly scale using the MuDRain multivariate disaggregation software. The disaggregation procedure results in well-reproduced rainfall dynamics and adjusts rainfall volume to the values from the non-recording gauges. The fully distributed wflow_hbv model, which is under development as a forecasting tool for the Kolubara catchment, is used for flood simulations with two alternative hourly rainfall data. The results show an improvement when the disaggregated rainfall from denser network is used, thus indicating the significance of better representation of rainfall temporal and spatial variability for flood forecasting.

scholarly journals Extending flood forecasting lead time in large watershed by coupling WRF QPF with distributed hydrological model

2016 ◽  
Author(s):  
Ji Li ◽  
Yangbo Chen ◽  
Huanyu Wang ◽  
Jianming Qin ◽  
Jie Li
Keyword(s):  
Lead Time ◽  
Hydrological Model ◽  
Southern China ◽  
Weather Forecast ◽  
Forecast Model ◽  
Flood Forecasting ◽  
Rain Gauge ◽  
Model Parameters ◽  
Distributed Hydrological Model ◽  
Flood Warning

Abstract. Long lead time flood forecasting is very important for large watershed flood mitigation as it provides more time for flood warning and emergency responses. Latest numerical weather forecast model could provide 1–15 days quantitative precipitation forecasting products at grid format, by coupling this product with distributed hydrological model could produce long lead time watershed flood forecasting products. This paper studied the feasibility of coupling the Liuxihe Model with the WRF QPF for a large watershed flood forecasting in southern China. The QPF of WRF products has three lead time, including 24 hour, 48 hour and 72 hour, the grid resolution is 20 km × 20 km. The Liuxihe Model is set up with freely downloaded terrain property, the model parameters were previously optimized with rain gauge observed precipitation, and re-optimized with WRF QPF. Results show that the WRF QPF has bias with the rain gauge precipitation, and a post-processing method is proposed to post process the WRF QPF products, which improves the flood forecasting capability. With model parameter re-optimization, the model's performance improves also, it suggests that the model parameters be optimized with QPF, not the rain gauge precipitation. With the increasing of lead time, the accuracy of WRF QPF decreases, so does the flood forecasting capability. Flood forecasting products produced by coupling Liuxihe Model with WRF QPF provides good reference for large watershed flood warning due to its long lead time and rational results.

Use of Radar Quantitative Precipitation Estimates (QPEs) for Improved Hydrological Model Calibration and Flood Forecasting

2021 ◽  
Author(s):  
Dayal Wijayarathne ◽  
Paulin Coulibaly ◽  
Sudesh Boodoo ◽  
David Sills
Keyword(s):  
Real Time ◽  
Model Calibration ◽  
Hydrological Model ◽  
Flood Forecasting ◽  
Hydrological Models ◽  
Radar Rainfall ◽  
Precipitation Estimates ◽  
Quantitative Precipitation Estimates ◽  
Streamflow Simulation ◽  
Rainfall Estimates

AbstractFlood forecasting is essential to minimize the impacts and costs of floods, especially in urbanized watersheds. Radar rainfall estimates are becoming increasingly popular in flood forecasting because they provide the much-needed real-time spatially distributed precipitation information. The current study evaluates the use of radar Quantitative Precipitation Estimates (QPEs) in hydrological model calibration for streamflow simulation and flood mapping in an urban setting. Firstly, S-band and C-band radar QPEs were integrated into event-based hydrological models to improve the calibration of model parameters. Then, rain gauge and radar precipitation estimates’ performances were compared for hydrological modeling in an urban watershed to assess radar QPE's effects on streamflow simulation accuracy. Finally, flood extent maps were produced using coupled hydrological-hydraulic models integrated within the Hydrologic Engineering Center- Real-Time Simulation (HEC-RTS) framework. It is shown that the bias correction of radar QPEs can enhance the hydrological model calibration. The radar-gauge merging obtained a KGE, MPFC, NSE, and VE improvement of about + 0.42, + 0.12, + 0.78, and − 0.23, respectively for S-band and + 0.64, + 0.36, + 1.12, and − 0.34, respectively for C-band radar QPEs. Merged radar QPEs are also helpful in running hydrological models calibrated using gauge data. The HEC-RTS framework can be used to produce flood forecast maps using the bias-corrected radar QPEs. Therefore, radar rainfall estimates could be efficiently used to forecast floods in urbanized areas for effective flood management and mitigation. Canadian flood forecasting systems could be efficiently updated by integrating bias-corrected radar QPEs to simulate streamflow and produce flood inundation maps.

Sign in / Sign up

Export Citation Format

Share Document