scholarly journals IDENTIFYING HIGH-RISK POPULATIONS OF TUBERCULOSIS USING ENVIRONMENTAL FACTORS AND GIS BASED MULTI-CRITERIA DECISION MAKING METHOD

2016 ◽  
Vol XLII-4/W1 ◽  
pp. 9-13 ◽  
Author(s):  
A. R. Abdul Rasam ◽  
N. M. Shariff ◽  
J. F. Dony
Keyword(s):  
Decision Making ◽  
High Risk ◽  
Uncertainty Assessment ◽  
Assessment Method ◽  
Geographical Information ◽  
Risk Level ◽  
Multi Criteria Decision Making ◽  
Index Model ◽  
Risk Areas ◽  
Mcdm Method

Development of an innovative method to enhance the detection of tuberculosis (TB) in Malaysia is the latest agenda of the Ministry of Health. Therefore, a geographical information system (GIS) based index model is proposed as an alternative method for defining potential high-risk areas of local TB cases at Section U19, Shah Alam. It is adopted a spatial multi-criteria decision making (MCDM) method for ranking environmental risk factors of the disease in a standardised five-score scale. Scale 1 and 5 illustrate the lowest and the highest risk of the TB spread respectively, while scale from 3 to 5 is included as a potential risk level. These standardised scale values are then combined with expert normalised weights (0 to 1) to calculate the overall index values and produce a TB ranked map using a GIS overlay analysis and weighted linear combination. It is discovered that 71.43% of the Section is potential as TB high risk areas particularly at urban and densely populated settings. This predictive result is also reliable with the current real cases in 2015 by 76.00% accuracy. A GIS based MCDM method has demonstrated analytical capabilities in targeting high-risk spots and TB surveillance monitoring system of the country, but the result could be strengthened by applying other uncertainty assessment method.

scholarly journals Spatial Distribution of Breast Cancer in Sudan 2010-2016

2019 ◽  
Author(s):  
Marwa Maweya Abdelbagi Elbasheer ◽  
Ayah Galal Abdelrahman Alkhidir ◽  
Siham Mohammed Awad Mohammed ◽  
Areej Abuelgasim Hassan Abbas ◽  
Aisha Osman Mohamed ◽  
...  
Keyword(s):  
Breast Cancer ◽  
Spatial Distribution ◽  
Spatial Analysis ◽  
High Risk ◽  
Geographical Information ◽  
Risk Level ◽  
Histopathological Diagnosis ◽  
Cross Sectional ◽  
Distribution Maps ◽  
Risk Areas

AbstractBackgroundBreast cancer is the most prevalent cancer among females worldwide including Sudan. The aim of this study was to determine the spatial distribution of breast cancer in Sudan.Materials and methodsA facility based cross-sectional study was implemented in eighteen histopathology laboratories distributed in the three localities of Khartoum State on a sample of 4630 Breast Cancer cases diagnosed during the period 2010-2016. A master database was developed through Epi Info™ 7.1.5.2 for computerizing the data collected: the facility name, type (public or private), and its geo- location (latitude and longitude). Personal data on patients were extracted from their respective medical records (name, age, marital status, ethnic group, State, locality, administrative unit, permanent address and phone number, histopathology diagnosis). The data was summarized through SPSS to generate frequency tables for estimating prevalence and the geographical information system (ArcGIS 10.3) was used to generate the epidemiological distribution maps. ArcGIS 10.3 spatial analysis features were used to develop risk maps based on the kriging method.ResultsBreast cancer prevalence was 3.9 cases per 100,000 female populations. Of the 4423 cases of breast cancer, invasive breast carcinoma of no special type (NST) was the most frequent (79.5%, 3517/4423) histopathological diagnosis. The spatial analysis indicated as high risk areas for breast cancer in Sudan the States of Nile River, Northern, Red Sea, White Nile, Northern and Southern Kordofan.ConclusionsThe attempt to develop a predictive map of breast cancer in Sudan revealed three levels of risk areas (risk, intermediate and high risk areas); regardless the risk level, appropriate preventive and curative health interventions with full support from decision makers are urgently needed.

Multi-Criteria Decision Making for Vulnerability Mapping of Flood Hazard: A Case Study of Pune City

2019 ◽  
Vol 2 (1) ◽  
pp. 41-52
Author(s):  
Nitin Mundhe
Keyword(s):  
Decision Making ◽  
Flood Hazard ◽  
Geographical Information ◽  
Multi Criteria Decision Making ◽  
Flood Hazards ◽  
Very High Frequency ◽  
Flood Vulnerability ◽  
Natural Risk ◽  
The Town

Floods are natural risk with a very high frequency, which causes to environmental, social, economic and human losses. The floods in the town happen mainly due to human made activities about the blockage of natural drainage, haphazard construction of roads, building, and high rainfall intensity. Detailed maps showing flood vulnerability areas are helpful in management of flood hazards. Therefore, present research focused on identifying flood vulnerability zones in the Pune City using multi-criteria decision-making approach in Geographical Information System (GIS) and inputs from remotely sensed imageries. Other input data considered for preparing base maps are census details, City maps, and fieldworks. The Pune City classified in to four flood vulnerability classes essential for flood risk management. About 5 per cent area shows high vulnerability for floods in localities namely Wakdewadi, some part of the Shivajinagar, Sangamwadi, Aundh, and Baner with high risk.

scholarly journals Complex T-spherical fuzzy Dombi aggregation operators and their applications in multiple-criteria decision-making

2021 ◽  
Author(s):  
Faruk Karaaslan ◽  
Mohammed Allaw Dawood Dawood
Keyword(s):  
Decision Making ◽  
Sensitivity Analysis ◽  
Fuzzy Set ◽  
Multiple Criteria Decision Making ◽  
Aggregation Operators ◽  
Multi Criteria Decision Making ◽  
Two Dimensional ◽  
Weighted Arithmetic ◽  
Mcdm Method ◽  
Dombi Operations

AbstractComplex fuzzy (CF) sets (CFSs) have a significant role in modelling the problems involving two-dimensional information. Recently, the extensions of CFSs have gained the attention of researchers studying decision-making methods. The complex T-spherical fuzzy set (CTSFS) is an extension of the CFSs introduced in the last times. In this paper, we introduce the Dombi operations on CTSFSs. Based on Dombi operators, we define some aggregation operators, including complex T-spherical Dombi fuzzy weighted arithmetic averaging (CTSDFWAA) operator, complex T-spherical Dombi fuzzy weighted geometric averaging (CTSDFWGA) operator, complex T-spherical Dombi fuzzy ordered weighted arithmetic averaging (CTSDFOWAA) operator, complex T-spherical Dombi fuzzy ordered weighted geometric averaging (CTSDFOWGA) operator, and we obtain some of their properties. In addition, we develop a multi-criteria decision-making (MCDM) method under the CTSF environment and present an algorithm for the proposed method. To show the process of the proposed method, we present an example related to diagnosing the COVID-19. Besides this, we present a sensitivity analysis to reveal the advantages and restrictions of our method.

scholarly journals Selection Of Cutting Inserts For Aluminum Alloys Machining By Using MCDM Method

2015 ◽  
Vol 66 (1) ◽  
pp. 98-101 ◽  
Author(s):  
Miloš Madić ◽  
Miroslav Radovanović ◽  
Dušan Petković ◽  
Bogdan Nedić
Keyword(s):  
Decision Making ◽  
Aluminum Alloys ◽  
Cutting Tool ◽  
Cutting Tools ◽  
Multi Criteria Decision Making ◽  
Complex Task ◽  
Cutting Inserts ◽  
Mcdm Method ◽  
Product Assessment ◽  
Selection Of

Abstract Machining of aluminum and its alloys requires the use of cutting tools with special geometry and material. Since there exists a number of cutting tools for aluminum machining, each with unique characteristics, selection of the most appropriate cutting tool for a given application is very complex task which can be viewed as a multi-criteria decision making (MCDM) problem. This paper is focused on multi-criteria analysis of VCGT cutting inserts for aluminum alloys turning by applying recently developed MCDM method, i.e. weighted aggregated sum product assessment (WASPAS) method. The MCDM model was defined using the available catalogue data from cutting tool manufacturers.

scholarly journals A COMPLEX PROPORTIONAL ASSESSMENT METHOD FOR GROUP DECISION MAKING IN AN INTERVAL-VALUED INTUITIONISTIC FUZZY ENVIRONMENT

2013 ◽  
Vol 19 (1) ◽  
pp. 22-37 ◽  
Author(s):  
Seyed Hossein Razavi Hajiagha ◽  
Shide Sadat Hashemi ◽  
Edmundas Kazimieras Zavadskas
Keyword(s):  
Decision Making ◽  
Fuzzy Sets ◽  
Group Decision Making ◽  
Group Decision ◽  
Assessment Method ◽  
Multi Criteria Decision Making ◽  
Intuitionistic Fuzzy ◽  
Finite Set ◽  
Copras Method ◽  
Interval Valued

Multi-criteria decision making is an implicational field that concerns with selecting or designing the best scenarios among a finite set of scenarios based on a finite set of criteria. Different methods and techniques for handling this issue have been proposed. Complex proportional assessment is an analytical tool for solving multi-criteria decision making problems. Originally, the COPRAS method has been developed for decision making under a deterministic environment. Since uncertainty is an unavoidable property of decision making due to a lack of knowledge, this paper suggests an extended form of the COPRAS method used for group decision making problems in an uncertain environment where such uncertainty is captured through a generalized form of fuzzy sets - the so called interval valued intuitionistic fuzzy sets. An algorithmic scheme for the COPRAS-IVIF method has been introduced thus examining its application with reference to two numerical examples. It seems that the recommended framework of COPRAS-IVIF can be satisfactorily implemented in decision making problems under ambiguous and ill-defined conditions.

Zoonotic cutaneous leishmaniasis in northeastern Iran: a GIS-based spatio-temporal multi-criteria decision-making approach

2016 ◽  
Vol 144 (10) ◽  
pp. 2217-2229 ◽  
Author(s):  
A. MOLLALO ◽  
E. KHODABANDEHLOO
Keyword(s):  
Decision Making ◽  
High Risk ◽  
Cutaneous Leishmaniasis ◽  
Vegetation Index ◽  
Fuzzy Ahp ◽  
Public Health Problem ◽  
Study Region ◽  
Zoonotic Cutaneous Leishmaniasis ◽  
Risk Areas ◽  
Risk Maps

SUMMARYZoonotic cutaneous leishmaniasis (ZCL) constitutes a serious public health problem in many parts of the world including Iran. This study was carried out to assess the risk of the disease in an endemic province by developing spatial environmentally based models in yearly intervals. To fill the gap of underestimated true burden of ZCL and short study period, analytical hierarchy process (AHP) and fuzzy AHP decision-making methods were used to determine the ZCL risk zones in a Geographic Information System platform. Generated risk maps showed that high-risk areas were predominantly located at the northern and northeastern parts in each of the three study years. Comparison of the generated risk maps with geocoded ZCL cases at the village level demonstrated that in both methods more than 90%, 70% and 80% of the cases occurred in high and very high risk areas for the years 2010, 2011, and 2012, respectively. Moreover, comparison of the risk categories with spatially averaged normalized difference vegetation index (NDVI) images and a digital elevation model of the study region indicated persistent strong negative relationships between these environmental variables and ZCL risk degrees. These findings identified more susceptible areas of ZCL and will help the monitoring of this zoonosis to be more targeted.

scholarly journals Drought Hazard Modelling of Klaten Regency Central Java Using AHP and TOPSIS Method

2021 ◽  
Vol 936 (1) ◽  
pp. 012043
Author(s):  
Meiga Nugrahani ◽  
Purnama Budi Santosa
Keyword(s):  
Decision Making ◽  
High Risk ◽  
Geographical Information Systems ◽  
Public Works ◽  
Disaster Mitigation ◽  
Geographical Information ◽  
Topsis Method ◽  
Drought Vulnerability ◽  
Central Java ◽  
The Impact

Abstract According to information of areas at high risk of drought provided by Central Java disaster risk assessment in 2016 - 2020, Klaten Regency is in the top ten at high risk of drought in Central Java. Drought is an annual disaster in this region, which usually occurs during the dry season. The impact of the drought has caused some areas to experience a lack of clean water. For the purpose of disaster mitigation in anticipating and minimizing drought disasters losses, it is necessary to analyze the level of drought with a decision-making system by comparing two methods, namely the AHP with TOPSIS. Both methods are decision-making methods that are composed of various criteria to obtain an alternative sequence of choices. Both the AHP and TOPSIS methods produces weight values and a positive ideal solution value, respectively. These are used as input data in the mapping of drought vulnerability analysis with Geographical Information Systems (GIS). The results of the analysis are visualized with a map that shows the level of drought vulnerability. AHP and TOPSIS method decision making generates the order of the drought classes in predicting the distribution of areas experiencing drought. To validate the model, the authors compare the results of the analysis of drought vulnerability of the two methods with drought data from BPBD (Local Agency for Disaster Prevention) and DPUPR (Public Works and Public Housing Department). The results show that AHP provides better results than TOPSIS based on results validation with BPBD and DPUPR data. By comparing the two models with BPBD data, the results show that the percentage of AHP suitability is higher than TOPSIS at 47,619% and 19,048% respectively.

scholarly journals ANALISIS POSTUR KERJA PADA BAGIAN GUDANG MUAT GREY DI PT SURYA PUTRA MULIA

2022 ◽  
Vol 5 (2) ◽  
Author(s):  
Ambang Rizki Aji Nugrahanto ◽  
Maria Puspita Sari
Keyword(s):  
High Risk ◽  
Assessment Method ◽  
Physical Activities ◽  
Risk Level ◽  
Entire Body ◽  
Moderate Risk ◽  
Loading Process ◽  
Work Posture ◽  
Rapid Entire Body Assessment ◽  
A Company

PT Surya Putra Mulia is a company that produces gray (greige) using the knitting process. This research is focused on the warehouse section on the loading process finished goods. In the warehouse section there are some excessive physical activities due to activities are carried out manually. Measurement of work posture is needed to determine whether the work posture carried out by the operator is good and ergonomic. Assessment of work posture is carried out using the Rapid Entire Body Assessment (REBA) method. Based on an assessment using the REBA (Rapid Entire Body Assessment) method, it shows that the withdrawal of finished goods includes a moderate level of risk, which means that improvements are needed. The activity of loading finished goods onto trucks (figure 3) includes a moderate risk level which means that repairs are needed, while in Figure 4 it is a high risk level which means that immediate corrective action is needed. For the preparation of finished goods on trucks, it is a moderate risk level, which means that repairs are needed. So that in the process of withdrawing finished goods, proposals are given to reduce the burden being transported. Then add a tool in the process of loading finished goods to the truck in the form of a hand stacker.

Sign in / Sign up

Export Citation Format

Share Document