scholarly journals 3D MODELING AND VISUALIZATION OF ARCHITECTURE AND LANDSCAPE

2021 ◽  
Vol XLVI-4/W5-2021 ◽  
pp. 159-166
Author(s):  
L. Corniello
Keyword(s):  
Architectural Design ◽  
Social Relationship ◽  
Point Clouds ◽  
3D Modelling ◽  
Vegetation Survey ◽  
Accurate Analysis ◽  
Different Types ◽  
Unesco Site ◽  
Digital Documentation ◽  
The City

Abstract. The study presents the results of architectural and vegetation survey missions in the UNESCO site of Quinta da Regaleira in the city of Sintra, Portugal. The different types of connecting elements of the epigean and hypogean architectures in the Park are analysed through the disciplinary tools of architectural design. Surveys and models of some of the connecting elements are proposed for an understanding of the site and its subsequent protection and valorisation through digital documentation. Of great interest is the architectural and social relationship that the site establishes with the city of Sintra.The survey of epigean architecture considered the following: the Casa da Renasceça, the Capela, the Cocheiras, the Estufa, the Oficina das Artes, the Loggia dos Pisoes, the Casa dos Ibis, the Torre da Regaleira the Terraço dos Mundos Celestes and the Fonte da Abundância.The survey of underground architecture considered the following architectures: the Gruta do Labirinto, the Gruta da Leda, the Lago da Cascata, the Gruta do Aquario, the Gruta do Oriente, the Portal dos Guardiães, the Poço Imperfeito and the Poço Iniziático.The work constitutes a complete and accurate analysis, represented through technical drawings, in different scales, digital point clouds and 3D modelling for the visualisation of the architecture in the Quinta da Regaleira in Sintra.

scholarly journals 3D modelling of beach topography changes caused by the tombolo phenomenon using terrestrial laser scanning (TLS) and unmanned aerial vehicle (UAV) photogrammetry on the example of the city of Sopot

2020 ◽  
Vol 40 (5) ◽  
pp. 675-685 ◽  
Author(s):  
Cezary Specht ◽  
Pawel S. Dabrowski ◽  
Mariusz Specht
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Cross Sections ◽  
Laser Scanning ◽  
Morphological Changes ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
3D Modelling ◽  
Sea Bottom ◽  
Aerial Vehicle ◽  
The City

Abstract In 2011, a yacht marina was built in Sopot (the largest holiday resort in Poland), which initiated the formation of a local shallowing of the bottom related to the tombolo effect. The building of the marina led to disturbances in the transmission of bottom deposits along the coast, which resulted from waves and the shift of the beach coastline by approx. 50 m towards the sea. Its effects include progressive morphological changes in the shore and the sea bottom, which will lead to the formation of a peninsula between the shore and the marina in the future. This paper presents the results of a comparative analysis of the accuracy of 3D modelling of the tombolo phenomenon in the onshore part of the beach using both point clouds obtained by terrestrial laser scanning methods and photogrammetric methods based on unmanned aerial vehicle photographs. The methods subjected to assessment include both those for land modelling and for determining the coastline course and its changes. The analysis results prove the existence of sub-metre differences in the imaged relief and the coastline course, which were demonstrated using an analysis of land cross-sections. The possibilities and limitations of both methods are demonstrated as well.

Isolation and Diagnosis of Fungi from Samples of Spices in the City of Nasiriya

2020 ◽  
pp. 7-9
Keyword(s):  
Chronic Diseases ◽  
Dilution Method ◽  
Local Markets ◽  
White Pepper ◽  
Black And White ◽  
Different Types ◽  
Potential Risks ◽  
The City ◽  
Isolated Species

Examination of (35) samples of spices obtained from local markets for the purposes of isolating and diagnosing fungi growing on them. Anine isolates belonging to 13 different types of fungi were diagnosed by the standard dilution method with three replications, and it has been observed that the most samples from which the fungi were isolated is ginger. It was found that the most isolated species of fungi are Penicillium, Aspergillus, and Rizupes spp. A rare colony of fungi was observed, which indicates contamination of the spices under study with the fungus. The present study aims to identify the potential risks of the presence of fungi in spices and what may result from mycotoxins that may be the cause of many chronic diseases as a result of using these spices in large quantities. The study recommends limiting the use of contaminated spices, especially ginger, in preparing food and its uses, in addition to other types such as cloves, black and white pepper, and other types of spices found in the local markets, especially the expired ones.

Levels of Radon in Different Types of Juices Are Different In Origin Consumed and Effective on Human Health in the City of Hilla-Babel-Iraq

2019 ◽  
Vol 50 (3) ◽  
pp. 105-110
Author(s):  
LAKEN H.A. ◽  
AHMED. Y. ALI ◽  
INAAM H. KADHIM ◽  
MOHAMMED R. KAHLIL ◽  
NASIR HUSSAIN
Keyword(s):  
Human Health ◽  
Different Types ◽  
The City

Narratives of Queer Migration

2020 ◽  
Author(s):  
John Gray ◽  
Mike Baynham
Keyword(s):  
The European Union ◽  
Spatial Mobility ◽  
Class Politics ◽  
Depth Migration ◽  
Different Types ◽  
Global North ◽  
Economic Necessity ◽  
The Village ◽  
The City

This chapter considers the phenomenon of queer migration from a linguistic perspective, paying particular attention to the constitutive role of spatial mobility in narrative and its role in the construction of queer migrant identities. The chapter begins by looking at the way in which queer migration has been discussed in the literature and then moves on to address three different types of queer migration in greater depth: migration within national borders from the village/countryside to the city; migration between cities in member states within the context of the European Union; and finally, asylum-seeking within the context of migration from the Global South to the Global North. The chapter concludes by suggesting that queer migration is a complex phenomenon in which the intersection of sexuality, gender identity, desire, affect, abjection, economic necessity, class, politics, and fear for one’s life combine in ways that are unique in the lives of individual migrants.

scholarly journals Accessible Routes Integrating Data from Multiple Sources

2020 ◽  
Vol 10 (1) ◽  
pp. 7
Author(s):  
Miguel R. Luaces ◽  
Jesús A. Fisteus ◽  
Luis Sánchez-Fernández ◽  
Mario Munoz-Organero ◽  
Jesús Balado ◽  
...  
Keyword(s):  
Information System ◽  
Data Model ◽  
Large Scale ◽  
Heterogeneous Data ◽  
Multiple Sources ◽  
Heterogeneous Data Sources ◽  
Different Types ◽  
Software Sensors ◽  
The City

Providing citizens with the ability to move around in an accessible way is a requirement for all cities today. However, modeling city infrastructures so that accessible routes can be computed is a challenge because it involves collecting information from multiple, large-scale and heterogeneous data sources. In this paper, we propose and validate the architecture of an information system that creates an accessibility data model for cities by ingesting data from different types of sources and provides an application that can be used by people with different abilities to compute accessible routes. The article describes the processes that allow building a network of pedestrian infrastructures from the OpenStreetMap information (i.e., sidewalks and pedestrian crossings), improving the network with information extracted obtained from mobile-sensed LiDAR data (i.e., ramps, steps, and pedestrian crossings), detecting obstacles using volunteered information collected from the hardware sensors of the mobile devices of the citizens (i.e., ramps and steps), and detecting accessibility problems with software sensors in social networks (i.e., Twitter). The information system is validated through its application in a case study in the city of Vigo (Spain).

scholarly journals Virtual Loom: a tool for the interactive 3D representation of historical fabrics

2021 ◽  
Author(s):  
Cristina Portalés ◽  
Manolo Pérez ◽  
Pablo Casanova-Salas ◽  
Jesús Gimeno
Keyword(s):  
Art History ◽  
3D Modelling ◽  
Current Version ◽  
Close Collaboration ◽  
Design And Implementation ◽  
Different Types ◽  
Interactive 3D ◽  
Silk Fabrics ◽  
Definition Of ◽  
3D Representations

Abstract3D modelling of man-made objects is widely used in the cultural heritage sector, among others. It is relevant for its documentation, dissemination and preservation. Related to historical fabrics, weaves and weaving techniques are still mostly represented in forms of 2D graphics and textual descriptions. However, complex geometries are difficult to represent in such forms, hindering the way this legacy is transmitted to new generations. In this paper, we present the design and implementation of SILKNOW’s Virtual Loom, an interactive tool aimed to document, preserve and represent in interactive 3D forms historical weaves and weaving techniques of silk fabrics, dating from the 15th to the 19th centuries. To that end, our tool only requires an image of a historical fabric. Departing from this image, the tool automatically subtracts the design, and allows the user to apply different weaves and weaving techniques. In its current version, the tool embeds five traditional weaving techniques, 39 weaves and six types of yarns, which have been defined thanks to close collaboration of experts in computer graphics, art history and historical fabrics. Additionally, users can change the color of yarns and produce different 3D representations for a given fabric, which are interactive in real time. In this paper, we bring the details of the design and implementation of this tool, focusing on the input data, the strategy to process images, the 3D modelling of yarns, the definition of weaves and weaving techniques and the graphical user interface. In the results section, we show some examples of image analysis in order to subtract the design of historical fabrics, and then we provide 3D representations for all the considered weaving techniques, combining different types of yarns.

scholarly journals Application of Biomimetics to Architectural and Urban Design: A Review across Scales

2020 ◽  
Vol 12 (23) ◽  
pp. 9813 ◽  
Author(s):  
Yuta Uchiyama ◽  
Eduardo Blanco ◽  
Ryo Kohsaka
Keyword(s):  
Urban Design ◽  
Architectural Design ◽  
Evolutionary Process ◽  
Future Research ◽  
Conceptual Level ◽  
Sustainable Society ◽  
Types Of Knowledge ◽  
The Social ◽  
Different Types ◽  
Shed Light

Application of biomimetics has expanded progressively to other fields in recent years, including urban and architectural design, scaling up from materials to a larger scale. Besides its contribution to design and functionality through a long evolutionary process, the philosophy of biomimetics contributes to a sustainable society at the conceptual level. The aim of this review is to shed light on trends in the application of biomimetics to architectural and urban design, in order to identify potential issues and successes resulting from implementation. In the application of biomimetics to architectural design, parts of individual “organisms”, including their form and surface structure, are frequently mimicked, whereas in urban design, on a larger scale, biomimetics is applied to mimic whole ecosystems. The overall trends of the reviewed research indicate future research necessity in the field of on biomimetic application in architectural and urban design, including Biophilia and Material. As for the scale of the applications, the urban-scale research is limited and it is a promising research which can facilitate the social implementation of biomimetics. As for facilitating methods of applications, it is instrumental to utilize different types of knowledge, such as traditional knowledge, and providing scientific clarification of functions and systems based on reviews. Thus, interdisciplinary research is required additionally to reach such goals.

scholarly journals Diversity and Community Structure of Oribatid Mites (Acari, Oribatei) at Memorial Complexes of a Megapolis

2013 ◽  
Vol 47 (4) ◽  
pp. 291-297
Author(s):  
L. A. Kolodochka ◽  
O. S. Shevchenko
Keyword(s):  
Community Structure ◽  
Species Diversity ◽  
Species Complex ◽  
Common Species ◽  
Oribatid Mites ◽  
Direct Relation ◽  
City Center ◽  
Degree Of Dominance ◽  
Different Types ◽  
The City

Abstract In different types of substrate (soil, litter, lichens and mosses) collected at three memorial complexes (cemeteries) of Kyiv (Ukraine), 70 species from 57 genera, 34 families of oribatid mites were found. A few eurytopic species capable of tolerance to different types of pollution make up an essential part in each species complex. The species diversity and complexity of oribatid community structure at researched areas increased with distance from the city center. There was no direct relation between the degree of dominance of most common species and the cemetery’s relative remoteness from the center of the city.

Sign in / Sign up

Export Citation Format

Share Document