scholarly journals Four-dimensional tracer flow reconstruction in fractured rock through borehole ground-penetrating radar (GPR) monitoring

Solid Earth ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 1497-1513
Author(s):  
Peter-Lasse Giertzuch ◽  
Joseph Doetsch ◽  
Alexis Shakas ◽  
Mohammadreza Jalali ◽  
Bernard Brixel ◽  
...  

Abstract. Two borehole ground-penetrating radar (GPR) surveys were conducted during saline tracer injection experiments in fully saturated crystalline rock at the Grimsel Test Site in Switzerland. The saline tracer is characterized by an increased electrical conductivity in comparison to formation water. It was injected under steady-state flow conditions into the rock mass that features sub-millimeter fracture apertures. The GPR surveys were designed as time-lapse reflection GPR from separate boreholes and a time-lapse transmission survey between the two boreholes. The local increase in conductivity, introduced by the injected tracer, was captured by GPR in terms of reflectivity increase for the reflection surveys, and attenuation increase for the transmission survey. Data processing and difference imaging was used to extract the tracer signal in the reflection surveys, despite the presence of multiple static reflectors that could shadow the tracer reflection. The transmission survey was analyzed by a difference attenuation inversion scheme, targeting conductivity changes in the tomography plane. By combining the time-lapse difference reflection images, it was possible to reconstruct and visualize the tracer propagation in 3D. This was achieved by calculating the potential radially symmetric tracer reflection locations in each survey and determining their intersections, to delineate the possible tracer locations. Localization ambiguity imposed by the lack of a third borehole for a full triangulation was reduced by including the attenuation tomography results in the analysis. The resulting tracer flow reconstruction was found to be in good agreement with data from conductivity sensors in multiple observation locations in the experiment volume and gave a realistic visualization of the hydrological processes during the tracer experiments. Our methodology was demonstrated to be applicable for monitoring tracer flow and transport and characterizing flow paths related to geothermal reservoirs in crystalline rocks, but it can be transferred in a straightforward manner to other applications, such as radioactive repository monitoring or civil engineering projects.

2021 ◽  
Author(s):  
Peter-Lasse Giertzuch ◽  
Joseph Doetsch ◽  
Alexis Shakas ◽  
Mohammadreza Jalali ◽  
Bernard Brixel ◽  
...  

Abstract. Two borehole ground penetrating radar (GPR) surveys were conducted during saline tracer injection experiments in fully-saturated crystalline rock at the Grimsel Test Site in Switzerland. The saline tracer is characterized by an increased electrical conductivity in comparison to formation water. It was injected under steady state flow conditions into the rock mass that features sub-mm fracture apertures. The GPR surveys were designed as time-lapse reflection GPR from separate boreholes and a time-lapse transmission survey between the two boreholes. The local increase in conductivity, introduced by the injected tracer, was captured by GPR in terms of reflectivity increase for the reflection surveys, and attenuation increase for the transmission survey. Data processing and difference imaging was used to extract the tracer signal in the reflection surveys, despite the presence of multiple static reflectors that could shadow the tracer reflection. The transmission survey was analyzed by a difference attenuation inversion scheme, targeting conductivity changes in the tomography plane. By combining the time-lapse difference reflection images, it was possible to reconstruct and visualize the tracer propagation in 3D. This was achieved by calculating the potential radially-symmetric tracer reflection locations in each survey and determining their intersections, to delineate the possible tracer locations. Localization ambiguity imposed by the lack of a third borehole for a full triangulation was reduced by including the attenuation tomography results into the analysis. The resulting tracer flow reconstruction was found to be in good agreement with data from conductivity sensors in multiple observation locations in the experiment volume and gave a realistic visualization of the hydrological processes during the tracer experiments. Our methodology proved to be successful for characterizing flow paths related with geothermal reservoirs in crystalline rocks, but it can be transferred in a straightforward manner to other applications, such as radioactive repository monitoring or civil engineering projects.


Geophysics ◽  
2020 ◽  
Vol 85 (3) ◽  
pp. H25-H37 ◽  
Author(s):  
Peter-Lasse Giertzuch ◽  
Joseph Doetsch ◽  
Mohammadreza Jalali ◽  
Alexis Shakas ◽  
Cédric Schmelzbach ◽  
...  

The characterization of flow and transport processes in fractured rock is challenging because they cannot be observed directly and hydrologic tests can only provide sparse and local data. Time-lapse ground penetrating radar (GPR) can be a valuable tool to monitor such processes in the subsurface, but it requires highly reproducible data. As part of a tracer injection experiment at the Grimsel Test Site (GTS) in Switzerland, borehole reflection GPR data were acquired in a time-lapse survey to monitor saline tracer flow through a fracture network in crystalline rock. Because the reflections from the tracer in the sub-mm fractures appear extremely weak, a differencing approach has been necessary to identify the tracer signal. Furthermore, several processing steps and corrections had to be applied to meet the reproducibility requirements. These steps include (1) single-trace preprocessing, (2) temporal trace alignment, (3) correction of sampling rate fluctuations, (4) spatial trace alignment, (5) spike removal, and (6) postprocessing procedures applied to the difference images. This allowed successful tracer propagation monitoring with a clear signal that revealed two separate tracer flow paths. The GPR results are confirmed by conductivity meters that were placed in boreholes in the GTS. If sufficient data processing is applied, GPR is shown to be capable of resolving tracer flow through sub-mm aperture fractures by difference reflection imaging even in challenging surroundings where many reflectors are present.


Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2949
Author(s):  
Peter-Lasse Giertzuch ◽  
Alexis Shakas ◽  
Joseph Doetsch ◽  
Bernard Brixel ◽  
Mohammadreza Jalali ◽  
...  

Solute tracer tests are an established method for the characterization of flow and transport processes in fractured rock. Such tests are often monitored with borehole sensors which offer high temporal sampling and signal to noise ratio, but only limited spatial deployment possibilities. Ground penetrating radar (GPR) is sensitive to electromagnetic properties, and can thus be used to monitor the transport behavior of electrically conductive tracers. Since GPR waves can sample large volumes that are practically inaccessible by traditional borehole sensors, they are expected to increase the spatial resolution of tracer experiments. In this manuscript, we describe two approaches to infer quantitative hydrological data from time-lapse borehole reflection GPR experiments with saline tracers in fractured rock. An important prerequisite of our method includes the generation of GPR data difference images. We show how the calculation of difference radar breakthrough curves (DRBTC) allows to retrieve relative electrical conductivity breakthrough curves for theoretically arbitrary locations in the subsurface. For sufficiently small fracture apertures we found the relation between the DRBTC values and the electrical conductivity in the fracture to be quasi-linear. Additionally, we describe a flow path reconstruction procedure that allows computing approximate flow path distances using reflection GPR data from at least two boreholes. From the temporal information during the time-lapse GPR surveys, we are finally able to calculate flow-path averaged tracer velocities. Our new methods were applied to a field data set that was acquired at the Grimsel Test Site in Switzerland. DRBTCs were successfully calculated for previously inaccessible locations in the experimental rock volume and the flow path averaged velocity field was found to be in good accordance with previous studies at the Grimsel Test Site.


2015 ◽  
Vol 19 (3) ◽  
pp. 1125-1139 ◽  
Author(s):  
P. Klenk ◽  
S. Jaumann ◽  
K. Roth

Abstract. High-resolution time-lapse ground-penetrating radar (GPR) observations of advancing and retreating water tables can yield a wealth of information about near-surface water content dynamics. In this study, we present and analyze a series of imbibition, drainage and infiltration experiments that have been carried out at our artificial ASSESS test site and observed with surface-based GPR. The test site features a complicated but known subsurface architecture constructed with three different kinds of sand. It allows the study of soil water dynamics with GPR under a wide range of different conditions. Here, we assess in particular (i) the feasibility of monitoring the dynamic shape of the capillary fringe reflection and (ii) the relative precision of monitoring soil water dynamics averaged over the whole vertical extent by evaluating the bottom reflection. The phenomenology of the GPR response of a dynamically changing capillary fringe is developed from a soil physical point of view. We then explain experimentally observed phenomena based on numerical simulations of both the water content dynamics and the expected GPR response.


Geophysics ◽  
2008 ◽  
Vol 73 (5) ◽  
pp. J25-J30 ◽  
Author(s):  
Georgios P. Tsoflias ◽  
Matthew W. Becker

Time-lapse ground-penetrating-radar (GPR) surveys exploit signal-amplitude changes to monitor saline tracers in fractures and to identify groundwater flow paths. However, the relationships between GPR signal amplitude, phase, and frequency with fracture aperture and fluid electrical conductivity are not well understood. We used analytical modeling, numerical simulations, and field experiments of multifrequency GPR to investigate these relationships for a millimeter-scale-aperture fracture saturated with water of varying salinity. We found that the response of lower-frequency radar signals detects changes in fluid salinity better than the response of higher-frequency signals. Increasing fluid electrical conductivity decreases low-frequency GPR signal wavelength, which improves its thin-layer resolution capability. We concluded that lower signal frequencies, such as [Formula: see text], and saline tracers of up to [Formula: see text] conductivity are preferable when using GPR to monitor flow in fractured rock. Furthermore, we found that GPR amplitude and phase responses are detectable in the field and predictable by EM theory and modeling; therefore, they can be related to fracture aperture and fluid salinity for hydrologic investigations of fractured-rock flow and transport properties.


2014 ◽  
Vol 11 (11) ◽  
pp. 12365-12404
Author(s):  
P. Klenk ◽  
S. Jaumann ◽  
K. Roth

Abstract. High-resolution time-lapse Ground-Penetrating Radar (GPR) observations of advancing and retreating water tables can yield a wealth of information about near-surface water content dynamics. In this study, we present and analyze a series of imbibition, drainage and infiltration experiments which have been carried out at our artificial ASSESS test site and observed with surface based GPR. The test site features a complicated but known subsurface architecture constructed with three different kinds of sand. It allows studying soil water dynamics with GPR under a wide range of different conditions. Here, we assess in particular (i) the accurate determination of soil water dynamics averaged over the whole vertical extent by evaluating the bottom reflection and (ii) the feasibility of monitoring the dynamic shape of the capillary fringe reflection. The phenomenology of the GPR response of a dynamically changing capillary fringe is developed from a soil physical point of view. We then explain experimentally observed phenomena based on numerical simulations of both the water content dynamics and the expected GPR response.


2005 ◽  
Vol 71 (12) ◽  
pp. 8721-8728 ◽  
Author(s):  
D. L. Stoner ◽  
S. M. Watson ◽  
R. D. Stedtfeld ◽  
P. Meakin ◽  
L. K. Griffel ◽  
...  

ABSTRACT Here we introduce the use of transparent experimental models fabricated by stereolithography for studying the impacts of biomass accumulation, minerals precipitation, and physical configuration of flow paths on liquid flow in fracture apertures. The internal configuration of the models ranged in complexity from simple geometric shapes to those that incorporate replicated surfaces of natural fractures and computationally derived fracture surfaces. High-resolution digital time-lapse imaging was employed to qualitatively observe the migration of colloidal and soluble dyes through the flow models. In this study, a Sphingomonas sp. and Sporosarcina (Bacillus) pasteurii influenced the fluid dynamics by physically altering flow paths. Microbial colonization and calcite deposition enhanced the stagnant regions adjacent to solid boundaries. Microbial growth and calcite precipitation occurred to a greater extent in areas behind the fabricated obstacles and less in high-velocity orifices.


2020 ◽  
Vol 726 ◽  
pp. 138511 ◽  
Author(s):  
Simone Di Prima ◽  
Thierry Winiarski ◽  
Rafael Angulo-Jaramillo ◽  
Ryan D. Stewart ◽  
Mirko Castellini ◽  
...  

Sensors ◽  
2019 ◽  
Vol 19 (1) ◽  
pp. 170 ◽  
Author(s):  
Xianyang Gao ◽  
Frank J. W. Podd ◽  
Wouter Van Verre ◽  
David J. Daniels ◽  
Anthony J. Peyton

Antennas are an important component in ground penetrating radar (GPR) systems. Although there has been much research reported on the design of individual antennas, there is less research reported on the design of the geometry of bi-static antennas. This paper considers the effects of key parameters in the setup of a GPR head consisting of a bi-static bow-tie pair to show the effect of these parameters on the GPR performance. The parameters investigated are the antenna separation, antenna height above the soil, and antenna input impedance. The investigation of the parameters was performed by simulation and measurements. It was found when the bi-static antennas were separated by 7 cm to 9 cm and were operated close to the soil (2 cm to 4 cm), the reflected signal from a near-surface object is relatively unaffected by height variation and object depth. An antenna input impedance of 250 Ω was chosen to feed the antennas to reduce the late-time ringing. Using these results, a new GPR system was designed and then evaluated at a test site near Benkovac, Croatia.


Sign in / Sign up

Export Citation Format

Share Document