scholarly journals "Evaluating the performance of triple crosses and their parents of maize under two plant densities "

2021 ◽  
Vol 8 (3) ◽  
Author(s):  
Samar Hashem Taqey Almousawi ◽  
Wajeeha Abed Hassan
Keyword(s):  
Block Design ◽  
Plant Yield ◽  
Synthetic Variety ◽  
Highest Weight ◽  
Randomized Complete Block Design ◽  
Plant Densities ◽  
Ear Height ◽  
And Control ◽  
Gm Plant

"Aiming at evaluating the performance of Three-way and single hybrids and their inbreds of Maize and comparing them with the ""Iba'a5018"" variety under two plants densities, a field. The study included a comparison of 5 inbreds and 10 single inbreds and 11 Three-way hybrids as well as the control variety ""Aba'a 5018"" under two plants densities, Were (60000 and 80000 plants ha-1). Randomized Complete Block design (RCBD) with four replications under splitplots arrangement were used, the main plots were included two plants densities and the subplots were included the Genotypes (27). Results revealed that low plants density gave ear length (19.64 cm), ears number (1.158 ear plant-1), weight of 100 grains (32.11 gm) plant yield (161.32 gm). Results showed the Inbred 5 gave the high values of plant yield (126.53 gm) because it gave ear height (116.10 cm), leaves number (16.33), ears length (16.50 cm), ears number per plant (1.219 ear plant-1 ), Also the Inbred 4 gave the highest values in yield per plant (132.67 gm), highest weight of 100 grains (30.62 gm). The single hybrids (2×3), (1×3) and (4×5) gave the most significant values in plant yield (164.21, 161.84, and 157.21 gm). As they increased the plant and ears height, leaves number, and ears length it also gave the highestvalues in ears numbers. Most of the Three way hybrids superior over the single hybrids and their inbred and the control synthetic variety, the Three way hybrid (1×2)×5 has a significant differences among his parents and the control variety in yield of plant (184.23 g) ears height average (219.33 cm), ears number (1.24). The hybrids (1×4)×2, (1×3)×5 and (3×4)×2 gave a significant values compared with their parents and control variety in yield per plan. It concluded that the genetics hybrids are appropriate for the Full season, and the single hybrids superior their parents (inbreeds), The best hybrid (3×2) gave the highest yield of planted area reached (11.43 tons ha-1) The Three way hybrid (1×2)×5 gave the highest value in yield of reached (12.75 tons ha-1"

Canola seed yield and phenological responses to plant density

2016 ◽  
Vol 96 (1) ◽  
pp. 151-159 ◽  
Author(s):  
Gan Yantai ◽  
K. Neil Harker ◽  
H. Randy Kutcher ◽  
Robert H. Gulden ◽  
Byron Irvine ◽  
...  
Keyword(s):  
Seed Yield ◽  
Plant Density ◽  
Block Design ◽  
Positive Association ◽  
High Yield ◽  
Western Canada ◽  
Flowering Period ◽  
Canola Seed ◽  
Randomized Complete Block Design ◽  
Plant Densities

Optimal plant density is required to improve plant phenological traits and maximize seed yield in field crops. In this study, we determined the effect of plant density on duration of flowering, post-flowering phase, and seed yield of canola in diverse environments. The field study was conducted at 16 site-years across the major canola growing area of western Canada from 2010 to 2012. The cultivar InVigor® 5440, a glufosinate-resistant hybrid, was grown at five plant densities (20, 40, 60, 80, and 100 plants m−2) in a randomized complete block design with four replicates. Canola seed yield had a linear relationship with plant density at 8 of the 16 site-years, a quadratic relationship at 4 site-years, and there was no correlation between the two variables in the remaining 4 site-years. At site-years with low to medium productivity, canola seed yield increased by 10.2 to 14.7 kg ha−1 for every additional plant per square metre. Averaged across the 16 diverse environments, canola plants spent an average of 22% of their life cycle flowering and another 27% of the time filling seed post-flowering. Canola seed yield had a negative association with duration of flowering and a positive association with the days post-flowering but was not associated with number of days to maturity. The post-flowering period was 12.7, 14.7, and 12.6 d (or 55, 68, and 58%) longer in high-yield experiments than in low-yield experiments in 2010, 2011, and 2012, respectively. We conclude that optimization of plant density for canola seed yield varies with environment and that a longer post-flowering period is critical for increasing canola yield in western Canada.

scholarly journals Green ear yield and grain yield of maize cultivars in competition with weeds

2010 ◽  
Vol 28 (1) ◽  
pp. 77-85 ◽  
Author(s):  
P.S.L. Silva ◽  
K.M.B. Silva ◽  
P.I.B. Silva ◽  
V.R. Oliveira ◽  
J.L.B. Ferreira
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Block Design ◽  
Corn Yield ◽  
Modern Agriculture ◽  
Maize Cultivars ◽  
Randomized Complete Block Design ◽  
Ear Height ◽  
Herbicide Use ◽  
Ground Part

The reduction in herbicide use is one of the greatest interests for modern agriculture and several alternatives are being investigated with this objective, including the adoption of cultivars that suppress weeds. The objective of this study was to verify if maize cultivars develop differently, in competition with weeds, to produce green ears and grain. Randomized complete block design was used, with split-plots and five replications. Cultivars DKB 390, DKB 466, DKB 350, AG 7000, AG 7575 and Master, were evaluated in the plots, without weeding and two weedings (at 22 and 41 days after sowing) in sub plots. Twenty-one species were identified in the experimental area, the most frequent being Gramineae (Poaceae), Euphorbiaceae, Leguminosae (Fabaceae) and Convolvulaceae species. There was no difference in the dry biomass above-ground part of the weeds in the plots of the evaluated cultivars. The cultivars behaved similarly in treatments with or without hoeing, except for plant height and ear height evaluations. Without hoeing, plant height increased in cultivar DKB 390, while plant height and ear height decreased in cultivar AG 7575. In the other cultivars, these traits did not change under weed control. The presence of weeds decreased the values of all traits employed to assess green corn yield, with the exception of the total number of green ears and grain yield.

scholarly journals Growth Performance of Lettuce Using Fermented Products as Organic Fertilizers

2019 ◽  
Vol 1 (3) ◽  
pp. 65
Author(s):  
Kareen Lynn E. Negado
Keyword(s):  
Growth Performance ◽  
Block Design ◽  
Organic Fertilizers ◽  
Control Groups ◽  
Lettuce Seeds ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
The Mean ◽  
And Control ◽  
Fermented Products

This study evaluates the growth performance of lettuce (Lactuca sativa L.) utilizing various fermented products as organic fertilizers. Growth performance is determined through the plant’s weight and leaves and significant differences in growth among various treatments: (a) fish trash, (b) scrap seaweeds, (c) kangkong, and control groups urea (positive) and water (negative) was also determined. Kangkong leaves are fermented for 10 days, fish trash for 14 days and 1 month for seaweeds. Lettuce seeds are sown before transplanting (15 days after germination) into pots and placed in raised beds. Randomized complete block design is utilized in the experiment. Growth performance is measured through the number of leaves 10, 20, and 30 days after transplant and mass of plant upon harvest. After 30 days, the lettuce was harvested. Based on the findings, the soil and fermented products are acidic and the needed organic matter for optimum growth of lettuce are not sufficient as well as some nutrients of the fermented products. Among the organic fertilizers, kangkong at 30 ml performs best in terms of the growth performance of lettuce. Urea performs best in terms of the mass upon harvest. Significant differences exist in the mean number of leaves of lettuce treated with various amounts of organic fertilizers with the plants that receive urea. Lettuce produce more number of leaves and with the highest mass upon harvest when treated with urea compared with organic fertilizers applied after 30 days from transplant. Keywords: fermented kangkong; fish trash; growth performance; lettuce; scrap seaweeds

scholarly journals 79 Seeing the whole picture: Utilizing GPS technology to determine distance and time calves devote to walking post-weaning

2019 ◽  
Vol 97 (Supplement_2) ◽  
pp. 43-44
Author(s):  
Kirsten Nickles ◽  
Alejandro E Relling ◽  
Anthony Parker
Keyword(s):  
Block Design ◽  
Repeated Measurements ◽  
Walking Distance ◽  
Beef Industry ◽  
Positioning Systems ◽  
Gps Technology ◽  
Animal Activity ◽  
Randomized Complete Block Design ◽  
Global Positioning ◽  
And Control

Abstract Common weaning practices in today’s beef industry involve discontinuation of the cow-calf social and nutritional bond. When this bond is discontinued, atypical behaviors of walking and vocalizing are immediately observed in the calf that negatively affect calf welfare. Global positioning systems (GPS) provide an opportunity to quantify the effects of animal activity on welfare. Utilizing GPS technology, we are able to determine total distance walked, speed, total time walking, or total time not walking and the interactions with calf production. Thus, the objective of the present study was to evaluate the effects of a familiar trainer animal on calf production during weaning and more specifically, common weaning behaviors such as walking utilizing a Garmin® product. A total of 80 Angus x Simmental heifer calves were used in this study. In all four replications, heifer calves were allotted to each treatment group (n = 10), trainer animal or control (TR, CON) on the day of weaning. Calves in the TR group were placed on pasture at weaning with the familiar trainer animal, and control calves were placed in a similar size pasture without a trainer animal. Each calf was also fitted with their own GPS collar that recorded on days 0, 7, and 14 relative to initiation of the study for a full 24 hours before removal. Data were analyzed as a randomized complete block design with repeated measurements (SAS 9.4). Placing calves with a familiar trainer animal decreased the distance calves walked (P = 0.001) as well as the amount of time calves were walking (P = 0.001). Placing a familiar trainer animal with calves at weaning, therefore, has an effect on walking distance and amount of time calves devote to walking.

scholarly journals Evaluation of the effectiveness of different herbicides on weed invasion in the fields of triticale

2012 ◽  
Vol 52 (4) ◽  
pp. 435-439 ◽  
Author(s):  
Parviz Sharifi Ziveh ◽  
Vahid Mahdavi
Keyword(s):  
Block Design ◽  
Control Treatment ◽  
Wild Oat ◽  
Control Methods ◽  
Dual Purpose ◽  
Weed Invasion ◽  
Barnyard Grass ◽  
Randomized Complete Block Design ◽  
Herbicide Use ◽  
And Control

Abstract One of the factors limiting crop growth is weeds. The weeds lead to a reduced performance of the crops. Chemical control methods are considered appropriate for controlling weeds. Therefore, in the fight to control weeds in triticale, the performance of the dual-purpose herbicide sulfosulfuron(Apirus®), mesosulfuron + idosulfuron(Atlantis®), metsulfuron methyl+sulfosulfuron(Total®) with surfactant and isoproton + diflufenican(Panther®) from the sulfonylurea group, and narrow leaf herbicides clodinafobpropargyl( Topik®), pinoxaden(New Axial®), diclofop-methyl(Iloxan®), pinoxaden + clodinafob-propagyl (Traxos ®), fenoxaprop-pethyl + mefen-pyper-d-ethyl(PumaSuper®), tralkoksidim(Grasb®) with 1 liter oil, flam-prop-m-isopropyl(Suffix BW®), and control treatment without herbicides were evaluated. The test was carried out in a randomized complete block design with four replications. Spraying was carried out using a back sprayer. For evaluation of ocular damage, the European Weed Research Council (EWRC) standard method was used. According to the performed studies, the narrow leaves of wild oat and barnyard grass were the dominant weeds. Results showed that all herbicide, except the herbicide tralkoksidim, were effective in weed control. The triticale yield was maintained with the use of these herbicides and none of herbicide had an adverse effect on the crop. In the first weeks of herbicide use, the triticale leaves appeared pale but this problem resolved over time. It seems that the herbicides discussed in this paper can be used on the triticale plant.

scholarly journals CROWN DIAMETER, CHILLING, AND GIBBERELLIC ACID INTERACTIONS INFLUENCE GROWTH AND REPRODUCTIVE OF STRAWBERRY CV. FESTIVAL.

2016 ◽  
Vol 47 (2) ◽  
Author(s):  
N. H. Khalil
Keyword(s):  
Gibberellic Acid ◽  
Cold Storage ◽  
Foliar Application ◽  
Block Design ◽  
Fragaria X Ananassa ◽  
Distilled Water ◽  
College Of Agriculture ◽  
Plant Yield ◽  
Crown Diameter ◽  
Randomized Complete Block Design

An experiment was conducted in unheated greenhouse units of the Department of Horticulture and Landscape -College of Agriculture- University of Baghdad on the first of October,   to observe the effects of amony interaction of crown diameter, chilling,  and foliar application of gibberellic acid on vegetative growth, and reproductive in cv. ‘Festival’ of strawberry (Fragaria x ananassa (Duch)). Using randomized Complete Block Design (RCBD), Plants were sorted into two groups according to crown diameter (11-15mm (Cd1)  and  6-10 mm (Cd2)), each of them sorted into two groups [Ch0 (without cold storage) and Ch1 (kept in a cold storage for  three weeks at 1-2°C), gibberellic acid was sprayed on plants, with concentration treatments included a control (G0) (distilled water), 150 mg. L–1 (G1) and 300 mg. L–1 (G2).The results showed the highest leaf number and Leaf area. Plant-1, (26.33), (29.70 dcm2) in (Cd1.Ch1.GA0) and (Cd1.Ch1. GA1) respectively, Number of stolon increased significantly by GAs application, the highest number were (8.3) in (Cd1.Ch1. GA2). The highest value of the TSS % was produced from the plants under the effect of  the treatment (Cd1.Ch1. GA0) (8.5%) and the highest pH were 3.70 from the treatment (Cd2.Ch0.GA2). The results indicated the superiority of treatment (Cd1.Ch0.GA0)     in fruit number (22.4), weight (17.77g) and a plant yield (398.2g).

scholarly journals Impact of paddy straw mulch on germination and growth of celery (Apium graveolens L.) seedlings and associated weeds in nursery

2020 ◽  
pp. 148-152
Author(s):  
A. S. Brar ◽  
P. K. Sraw ◽  
B. S. Dhillon
Keyword(s):  
Retention Time ◽  
Block Design ◽  
Dry Weight ◽  
Apium Graveolens ◽  
Full Time ◽  
Paddy Straw ◽  
Straw Mulch ◽  
Randomized Complete Block Design ◽  
And Control ◽  
Germination And Growth

A study was undertaken during three consecutive rabi seasons of 2014–15 to 2016–17 at the Research Farm, Department of Agronomy, Punjab Agricultural University, Ludhiana (Punjab) to determine the effect of paddy straw mulch load and retention time on the germination and growth of celery and associated weeds. The experiment was conducted in randomized complete block design (RCBD) with nine treatments viz., paddy straw mulch @ 4 and 6 t ha-1 with retention time of 15, 20, 25 days after sowing (DAS), full time retention (60 DAS), and control (without mulch). The results indicated that application of paddy straw mulch @ 4 or 6 t ha-1 significantly improved the germination of celery in nursery as compared to no mulch treatment but retention of paddy straw mulch beyond 20 days after sowing suppressed the celery seedlings adversely resulting in lowering seedling population as well as fresh and dry weight of celery seedlings. Application of paddy straw mulch @ 4 or 6 t ha-1 resulted in significantly lower density and dry weight of weeds as compared to control. Further, each successive increase in retention time of paddy straw mulch from 15 DAS to full time retention (60 DAS) through 20 and 25 DAS significantly reduced the weed population in celery nursery.

scholarly journals EXPLOITATION OF NEW CHEMISTRY FUNGICIDES AGAINST CHARCOAL ROT OF SESAME CAUSED BY MACROPHOMINA PHASIOLINA IN PAKISTAN

2017 ◽  
Vol 29 (2) ◽  
pp. 257 ◽  
Author(s):  
Muhammad R. Bashir ◽  
Abid Mehmood ◽  
Muhammad Sajid ◽  
Muhammad A. Zeshan ◽  
Muhammad Mohsin ◽  
...  
Keyword(s):  
Disease Incidence ◽  
Block Design ◽  
Macrophomina Phaseolina ◽  
Colony Growth ◽  
Field Conditions ◽  
Charcoal Rot ◽  
Randomized Design ◽  
Randomized Complete Block Design ◽  
And Control ◽  
Fungal Colony

The current research was conducted to find out the most appropriate concentrations of six fungicides for the management of sesame charcoal rot caused by Macrophomina phaseolina under lab and field conditions. The treatments viz. Antracol, Topsin-M, Mancozeb, Score, Topas, Nativo and Control with concentrations of 150, 250 and 350ppm were used with three replications under completely randomized design and randomized complete block design in Lab. and field conditions respectively. The mean colony growth of all treatments expressed that Nativo exhibited minimum colony growth of (0.93 cm) as compared to Score (1.14 cm), Topsin-M (1.42 cm), Mancozeb (1.77 cm), Antracol (2.04 cm), Topass (2.33 cm) correspondingly. The interaction between treatments and concentrations (T×C) showed that  used concentrations 150 ppm, 250 ppm and 350 ppm of Nativo abundantly inhibit fungal colony growth upto 1.26 cm, 0.86 cm and 0.66 cm respectively whereas the interaction between treatments and days expressed that after day ninth the minimum colony growth (1.23 cm) was observed for Nativo as compared to all other treatments. Similarly, the interaction between concentrations and days expressed highest fungal colony growth at concentration 150 ppm on day third (2.06 cm), sixth (3.02 cm) and ninth (3.65 cm) but the interaction of treatments, days and concentrations expressed that at 150 ppm concentration, all treatments exhibited minimum colony growth (1.70 to 3.30) cm at third, sixth and ninth day as compared to 250 and 350 ppm concentration respectively with respect to control (6.90 cm). In filed conditions, Nativo exhibited minimum Mean Disease Incidence (12.55%) whereas the interaction between treatments and days showed minimum of 14.95%, 12.82% and 9.90% disease incidence by Nativo as compared to all other treatments including control (66.86%, 77.57% and 87.22%) after day tenth, twenty and thirty. It was concluded that Nativo is significantly inhibiting the colony growth under lab and filed conditions.

scholarly journals Study of Combining Ability and Nature of Gene Action for Yield and Yield Related Traits in Maize (Zea mays L.)

2019 ◽  
pp. 1-8
Author(s):  
Birender Singh ◽  
Abhinav Abhishek ◽  
R. B. P. Nirala ◽  
S. S. Mandal ◽  
Tushar Ranjan
Keyword(s):  
Grain Yield ◽  
Zea Mays L ◽  
Gene Action ◽  
Block Design ◽  
Diallel Mating Design ◽  
Randomized Complete Block Design ◽  
Additive Gene ◽  
Ear Height ◽  
The Mean ◽  
Half Diallel

The present investigation was carried out using thirty eight genotypes (eight parents, twenty eight F1's and two checks) using Griffing's half diallel mating design. The experiment was laid out in a randomized complete block design with three replications during kharif 2017 at the research farm of Bihar Agriculture College, Sabour. Observations were recorded for six pre-harvest characters viz days to 50% anthesis, days to 50% silking, anthesis silking interval, days to 75% brown husk, plant height, ear height and seven post-harvest characters viz cob length, cob diameter, number of kernel rows per cob, number of kernels per row, 1000 seed weight, shelling percentage and grain yield at 15% moisture. The mean sum of square of treatments was found to be significant for days to 75% brown husk and shelling per cent and highly significant for all other characters. The mean sum of square for GCA was found to be significant for cob length, no. of kernel row per cob, no. of kernels per row and highly significant for remaining all the characters except days to 75% brown husk and shelling%. The mean sum of square for SCA was significant for days to 75% brown husk and highly significant for all the remaining characters. On the basis of GCA effect for grain yield at 15% moisture, the parents BML-7, VQL-1 and SML-1 were found to be good general combiners. The ratio of GCA variance to SCA variance was found to be less than 1 for all the traits which indicated the preponderance of non-additive gene action. On the basis of SCA effects better performing crosses for grain yield at 15% moisture were DTPYC-9 × LM-13, CLQRCY-44 × VQL-1, CML-161 × SML-1 and CML-161× BML-7.

scholarly journals Potential of twenty exotic germplasms to improve Brazilian maize architecture

1997 ◽  
Vol 20 (4) ◽  
pp. 691-969 ◽  
Author(s):  
Amadeu Regitano Neto ◽  
Luciano Lourenço Nass ◽  
José Branco de Miranda Filho
Keyword(s):  
Block Design ◽  
Correlation Coefficients ◽  
Phenotypic Correlation ◽  
Maize Breeding ◽  
Branch Number ◽  
Population Means ◽  
Local Populations ◽  
Randomized Complete Block Design ◽  
Tassel Branch Number ◽  
Ear Height

Temperate and temperate x tropical germplasms were introduced into the maize breeding of the Department of Genetics (ESALQ-USP). Twenty populations designated as P-1 to P-20 and a check population were evaluated in a randomized complete block design with two replications at Piracicaba, SP, Brazil. Plots were 2.0 m long, spaced 1.0 m apart, with 10 plants per plot after thinning. The following traits were evaluated: PH, plant height; EH, ear height; TB, tassel branch number; KW, 100 kernels weight; EL, ear length; ED, ear diameter; KR, kernels per row, and RN, number of rows of kernels. The means of the exotic populations showed a variation in performance for all traits. The population means were greater than check means for KW, EL, and KR. Populations P-9, P-10, P-12, and P-13 showed low relative ear placement values (EH/PH index), indicating that these materials could contribute to lower ear placement in local populations. P-1 and P-9 showed a high potential to reduce TB. The phenotypic correlation coefficients among populations were positive for most combinations, except for RN with PH, EH, TB, and KW. Predictions of 19 composite means were obtained for all traits.

Sign in / Sign up

Export Citation Format

Share Document