scholarly journals Acacia melanoxylon in Argentina: heartwood content and its relationship with site, growth and age of the trees

2017 ◽  
Vol 26 (1) ◽  
pp. e007 ◽  
Author(s):  
Dora-Virginia Igartúa ◽  
Karen Moreno ◽  
Silvia-Estela Monteoliva
Keyword(s):  
Growth Rate ◽  
Linear Equations ◽  
Tree Height ◽  
Age And Growth ◽  
Absolute Amount ◽  
Basal Region ◽  
Total Height ◽  
Breast Height ◽  
Acacia Melanoxylon ◽  
Heartwood Diameter

Aims of study: To characterize the wood of Acacia melanoxylon in relation to its potential use in the construction and furniture industry, here we determined the heartwood and sapwood content and distribution within the stem and analyzed their relationship with the growing site, age and growth rate of the trees. Finally, we predicted heartwood content by two easy-to-measure variables.Area of study: Buenos Aires, Argentina.Methods: 20 trees aged between 9 and 32 years were sampled in four sites. Axial sampling was carried out at four heights of the stem (base, breast height, and 30% and 50% of the total height), and the heartwood content (percentage and volume) and sapwood content (cm) determined.Results: The trees analyzed presented conical-shaped heartwood following the outline of the stem along all its commercial height. Within the stem, the highest volume of heartwood was observed at the basal region (53%) and up to 30% of total height, a feature observed in all the sites studied. The sapwood content was constant along the entire stem (2.18 cm). The age of the trees did not influence the heartwood content, whereas the environmental conditions provided by each site (heartwood/volume and heartwood/diameter growth positive ratios) did affect this feature.Research highlights: The absolute amount of heartwood was driven by growth rate, due to the forest structure of non-uniform age. The heartwood volume can be estimated through fitting linear equations (R2 0.78 - 0.89) with two easily measurable variables such as diameter at breast height and tree height.

scholarly journals ĐẶC ĐIỂM CẤU TRÚC VÀ SINH TRƯỞNG RỪNG TRỒNG KEO LƯỠI LIỀM (Acacia crassicarpa A.Cunn. ex Benth.) TẠI TỈNH BÌNH THUẬN

2020 ◽  
Vol 4 (2) ◽  
pp. 1940-1950
Author(s):  
Nguyễn Văn Việt ◽  
Phan Thị Thanh Thủy ◽  
Lê Châu Thành
Keyword(s):  
Growth Rate ◽  
Weibull Distribution ◽  
Tree Height ◽  
Water Source ◽  
Growth Function ◽  
Forest Plantation ◽  
Crown Diameter ◽  
Breast Height ◽  
Acacia Crassicarpa ◽  
Set Up

Trong những năm gần đây, Keo lưỡi liềm được đưa vào trồng trên các vùng cát ven biển tại Bình Thuận nhằm hạn chế tình trạng sa mạc hóa, duy trì nguồn nước ổn định, chặn đứng nạn cát bay, cát nhảy ở vùng này và thực tế cho thấy loài cây này đã sinh trưởng và phát triển tốt. Bài viết này công bố những kết quả nghiên cứu về cấu trúc và sinh trưởng của rừng trồng keo lưỡi liềm tại Bình Thuận. Nghiên cứu áp dụng phương pháp lập 60 ô tiêu chuẩn (otc) điển hình trên đối tượng rừng trồng keo lưỡi liềm tại Bình Thuận. Kết quả nghiên cứu cho thấy, phân bố số cây theo cỡ đường kính ngang ngực và đường kính tán có dạng một đỉnh lệch trái trong khi đó phân bố số cây theo chiều cao có dạng đỉnh lệch phải và được mô phỏng tốt bằng hàm Weibull. Quá trình sinh trưởng về đường kính thân (D1,3), chiều cao (Hvn), đường kính tán (Dt), thể tích (V) và trữ lượng (M) được mô tả rất tốt bằng hàm Schumacher. Các phương trình sinh trưởng như sau: ABSTRACT In recent years, Acacia crassicarpa A. Cunn.ex Benth. has been planted in the coastal sandy areas of Binh Thuan province to prevent desertification, maintain the water source, stop the flying sand, giving good results. The research results of the study presented the growth and the growth rate of the forest plantation of Acacia crassicarpa A. Cunn.ex Benth. We set up 60 particularly random sample plots on the Acacia crassicarpa plantation. The results showed that the distribution of diameter at breast height (N%/D1.3) and crown diameter (N%/Dt) were left skewed peak distributions while the distribution of tree height (N%/HVN) was a right skewed peak distribution and were well-simulated by Weibull distribution. The growth of Acacia crassicarpa plantation was modeled by Schumacher function, growth function as follows:

scholarly journals Estimation of Genetic Parameters and Wood Yield Selection Index in a Clonal Trial of Korean Pine (Pinus koraiensis) in Northeastern China

2021 ◽  
Vol 13 (8) ◽  
pp. 4167
Author(s):  
David Kombi Kaviriri ◽  
Huan-Zhen Liu ◽  
Xi-Yang Zhao
Keyword(s):  
Selection Index ◽  
Tree Height ◽  
Stem Volume ◽  
Korean Pine ◽  
Branch Number ◽  
Basal Diameter ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Stem Straightness ◽  
Clonal Trial

In order to determine suitable traits for selecting high-wood-yield Korean pine materials, eleven morphological characteristics (tree height, basal diameter, diameter at breast height, diameter at 3 meter height, stem straightness degree, crown breadth, crown height, branch angle, branch number per node, bark thickness, and stem volume) were investigated in a 38-year-old Korean pine clonal trial at Naozhi orchard. A statistical approach combining variance and regression analysis was used to extract appropriate traits for selecting elite clones. Results of variance analysis showed significant difference in variance sources in most of the traits, except for the stem straightness degree, which had a p-value of 0.94. Moderate to high coefficients of variation and clonal repeatability ranged from 10.73% to 35.45% and from 0.06% to 0.78%, respectively. Strong significant correlations on the phenotypic and genotypic levels were observed between the straightness traits and tree volume, but crown breadth was weakly correlated to the volume. Four principal components retaining up to 80% of the total variation were extracted, and stem volume, basal diameter, diameter at breast height, diameter at 3 meter height, tree height, and crown height displayed high correlation to these components (r ranged from 0.76 to 0.98). Based on the Type III sum of squares, tree height, diameter at breast height, and branch number showed significant information to explain the clonal variability based on stem volume. Using the extracted characteristics as the selection index, six clones (PK105, PK59, PK104, PK36, PK28, and K101) displayed the highest Qi values, with a selection rate of 5% corresponding to the genetic gain of 42.96% in stem volume. This study provides beneficial information for the selection of multiple traits for genetically improved genotypes of Korean pine.

Influence of tree age and growth rate on the radial resin duct system in loblolly pine (Pinus taeda)

1986 ◽  
Vol 64 (5) ◽  
pp. 1046-1049 ◽  
Author(s):  
J. D. DeAngelis ◽  
T. E. Nebeker ◽  
J. D. Hodges
Keyword(s):  
Growth Rate ◽  
Pinus Taeda ◽  
Loblolly Pine ◽  
Dendroctonus Frontalis ◽  
Age And Growth ◽  
Tree Age ◽  
Secretory Cells ◽  
Tangential Plane ◽  
Cross Sectional ◽  
Resin Duct

Formation of radial resin ducts and their associated secretory cells in loblolly pine (Pinus taeda L.) is influenced by the age and growth rate of the annual ring in which the ducts are formed. The spatial pattern of radial ducts on the tangential plane is nonrandom, exhibiting a regular or dispersed pattern. A significantly higher density of radial ducts was found in the inner, first-formed growth rings at all heights within the tree. Radial duct formation was found to be positively correlated with radial growth rate, when growth rate is expressed as increment of cross-sectional area growth. These findings may partially explain why older, slower growing trees tend to be more susceptible to attack by the southern pine beetle, Dendroctonus frontalis Zimmermann, and associated microorganisms, since the resin-producing system is a primary defense against these agents.

scholarly journals Seemingly Unrelated Mixed-Effects Biomass Models for Black Locust in West Poland

Forests ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 380
Author(s):  
Karol Bronisz ◽  
Szymon Bijak ◽  
Rafał Wojtan ◽  
Robert Tomusiak ◽  
Agnieszka Bronisz ◽  
...  
Keyword(s):  
Black Locust ◽  
Random Effect ◽  
Tree Height ◽  
Cross Model ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Dependent Variables ◽  
Dry Biomass ◽  
Biomass Components ◽  
Independent Variable

Information about tree biomass is important not only in the assessment of wood resources but also in the process of preparing forest management plans, as well as for estimating carbon stocks and their flow in forest ecosystems. The study aimed to develop empirical models for determining the dry mass of the aboveground parts of black locust trees and their components (stem, branches, and leaves). The research was carried out based on data collected in 13 stands (a total of 38 sample trees) of black locust located in western Poland. The model system was developed based on multivariate mixed-effect models using two approaches. In the first approach, biomass components and tree height were defined as dependent variables, while diameter at breast height was used as an independent variable. In the second approach, biomass components and diameter at breast height were dependent variables and tree height was defined as the independent variable. Both approaches enable the fixed-effect and cross-model random-effect prediction of aboveground dry biomass components of black locust. Cross-model random-effect prediction was obtained using additional measurements of two extreme trees, defined as trees characterized by the smallest and largest diameter at breast height in sample plot. This type of prediction is more precise (root mean square error for stem dry biomass for both approaches equals 77.603 and 188.139, respectively) than that of fixed-effects prediction (root mean square error for stem dry biomass for both approaches equals 238.716 and 206.933, respectively). The use of height as an independent variable increases the possibility of the practical application of the proposed solutions using remote data sources.

scholarly journals Age and growth of the white croaker Micropogonias furnieri (Perciformes: Sciaenidae) in a coastal area of Southeastern Brazilian Bight

2017 ◽  
Vol 15 (1) ◽  
Author(s):  
Rosa S. Santos ◽  
Marcus R. da Costa ◽  
Francisco G. Araújo
Keyword(s):  
Growth Rate ◽  
Low Temperature ◽  
Growth Parameters ◽  
Direct Application ◽  
Age And Growth ◽  
Fish Populations ◽  
Edge Type ◽  
White Croaker ◽  
Micropogonias Furnieri ◽  
Available Information

ABSTRACT Studies on age and growth of fish populations have direct application in fisheries and contribute for policies of conservation. Our aim was update information on the Micropogonias furnieri growth parameters based on sagittae otoliths annulis readings, and we expected that the studied population from Southeast Brazil can reach more longevity than the reported in the available literature. We examined 286 individuals between August-2010 and July-2011 from Ubatuba Bay, SP. The Total Length ranged 200-480 mm. The determined growth parameters were: Males, L∞ =523.4mm, k = 0.05×year-1, t0 = -8.78 year; Females L∞ = 573.5mm, k = 0.06 × year-1, t0 = -7.49 year. The MI and % of edge type evidenced the formation of one ring per year during autumn/winter, coinciding with low temperature and low growth rate. These results differed from those reported for the Vazzoler’s Population I (summer), and we detected higher longevity (45-48 years) as compared with the recorded in the available information.

scholarly journals <sup>210</sup>Pb-<sup>226</sup>Ra chronology reveals rapid growth rate of <i>Madrepora oculata</i> and <i>Lophelia pertusa</i> on world's largest cold-water coral reef

2012 ◽  
Vol 9 (3) ◽  
pp. 1253-1265 ◽  
Author(s):  
P. Sabatier ◽  
J.-L. Reyss ◽  
J. M. Hall-Spencer ◽  
C. Colin ◽  
N. Frank ◽  
...  
Keyword(s):  
Growth Rate ◽  
Coral Reef ◽  
Metal Oxides ◽  
Growth Rates ◽  
Cold Water ◽  
Age And Growth ◽  
Lophelia Pertusa ◽  
Fe Oxide ◽  
Oxide Contamination ◽  
Water Coral

Abstract. Here we show the use of the 210Pb-226Ra excess method to determine the growth rate of two corals from the world's largest known cold-water coral reef, Røst Reef, north of the Arctic circle off Norway. Colonies of each of the two species that build the reef, Lophelia pertusa and Madrepora oculata, were collected alive at 350 m depth using a submersible. Pb and Ra isotopes were measured along the major growth axis of both specimens using low level alpha and gamma spectrometry and trace element compositions were studied. 210Pb and 226Ra differ in the way they are incorporated into coral skeletons. Hence, to assess growth rates, we considered the exponential decrease of initially incorporated 210Pb, as well as the increase in 210Pb from the decay of 226Ra and contamination with 210Pb associated with Mn-Fe coatings that we were unable to remove completely from the oldest parts of the skeletons. 226Ra activity was similar in both coral species, so, assuming constant uptake of 210Pb through time, we used the 210Pb-226Ra chronology to calculate growth rates. The 45.5 cm long branch of M. oculata was 31 yr with an average linear growth rate of 14.4 ± 1.1 mm yr−1 (2.6 polyps per year). Despite cleaning, a correction for Mn-Fe oxide contamination was required for the oldest part of the colony; this correction corroborated our radiocarbon date of 40 yr and a mean growth rate of 2 polyps yr−1. This rate is similar to the one obtained in aquarium experiments under optimal growth conditions. For the 80 cm-long L. pertusa colony, metal-oxide contamination remained in both the middle and basal part of the coral skeleton despite cleaning, inhibiting similar age and growth rate estimates. The youngest part of the colony was free of metal oxides and this 15 cm section had an estimated a growth rate of 8 mm yr−1, with high uncertainty (~1 polyp every two to three years). We are less certain of this 210Pb growth rate estimate which is within the lowermost ranges of previous growth rate estimates. We show that 210Pb-226Ra dating can be successfully applied to determine the age and growth rate of framework-forming cold-water corals if Mn-Fe oxide deposits can be removed. Where metal oxides can be removed, large M. oculata and L. pertusa skeletons provide archives for studies of intermediate water masses with an up to annual time resolution and spanning over many decades.

scholarly journals Growth and yield of teak stands at different spacing

2018 ◽  
Vol 53 (10) ◽  
pp. 1109-1118
Author(s):  
Reginaldo Antonio Medeiros ◽  
Haroldo Nogueira de Paiva ◽  
Flávio Siqueira D’Ávila ◽  
Helio Garcia Leite
Keyword(s):  
Growth Rate ◽  
Basal Area ◽  
Tree Height ◽  
Tectona Grandis ◽  
Growth And Yield ◽  
Mean Square ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Total Tree

Abstract: The objective of this work was to evaluate the growth and yield of teak (Tectona grandis) stands at different spacing and in different soil classes. Twelve spacing were evaluated in an Inceptisol and Oxisol, in plots with an area of 1,505 or 1,548 m2, arranged in a completely randomized design with nine replicates. The teak trees were measured at 26, 42, 50, and 78 months of age. Total tree height was less affected by spacing. Mean square diameter was greater in wider spacing, whereas basal area and total volume with bark were greater in closer spacing. An increase in volume with bark per tree was observed with the increase of useful area per plant. For teak trees, growth stagnation happens earlier, the growth rate is higher in closer spacing, and the plants grow more in the Inceptisol than in the Oxisol.

scholarly journals Field Evaluation of Populus deltoides Bartr. ex Marsh. at Two Sites in Indo-gangetic Plains of India

2010 ◽  
Vol 59 (1-6) ◽  
pp. 1-7 ◽  
Author(s):  
G. P. S. Dhillon ◽  
Avtar Singh ◽  
Pritpal Singh ◽  
D. S. Sidhu
Keyword(s):  
Populus Deltoides ◽  
Growth Traits ◽  
Tree Height ◽  
Field Evaluation ◽  
Site Conditions ◽  
Genetic Advance ◽  
Gangetic Plains ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Northwestern India

Abstract Results from clonal trials of Populus deltoides conducted in two distinct agroclimatic regions of Punjab in northwestern India are reported and discussed. Sixteen clones were evaluated at Hambran and Bathinda where commonly grown clone ‘G-48’ was considered as control. Significant differences among clones (P < 0.001) were observed for diameter at breast height (DBH), tree height and volume at the age of four and six years under both the site conditions. Clone ‘L-48’ ranked first for volume at six year age at both sites and was followed by clone ‘Ranikhet’. The respective superiority for volume of these clones over control was 44.8 and 23.2 per cent at Hambran and 72.5 and 30.7 per cent at Bathinda. All growth traits registered significantly higher values at Hambran in comparison to those at Bathinda. Clone x site interaction was also significant (P < 0.001). The clones ‘L-168’, ‘154/86’, ‘Solan-z’ and ‘170/88’ experienced huge fluctuation in ranking between sites for volume at 6-year age. The DBH and height showed significant and positive correlation with each other and with tree volume at all the age combinations. The clonal mean heritability was quite high both at Hambran (0.73-0.86) and Bathinda (0.80-0.95). The genetic advance were the highest for volume (33.34-64.26%) and the lowest (10.65-22.79%) in case of height.

Sign in / Sign up

Export Citation Format

Share Document