scholarly journals Comparison of Surface Quality and Tool-Life of Glulam Window Elements after Planing

2019 ◽  
Vol 70 (1) ◽  
pp. 7-18 ◽  
Author(s):  
Michal Dobrzynski ◽  
Kazimierz A. Orlowski ◽  
Michal Biskup
Keyword(s):  
Surface Quality ◽  
Cutting Tool ◽  
Cost Effective ◽  
Point Of View ◽  
Raw Material ◽  
Economic Point ◽  
Solid Carbide ◽  
Surface Profiles ◽  
Wooden Surface

The quality of the surface of wooden elements, that have been planed, has a crucial importance in the whole production process, since the obtained effects affect the quality of wooden surface after finishing (painting). The occurrence of defects is usually the reason for qualifying a workpiece as scrap or for requiring additional work. This paper presents the selected results of research of the effect of the cutting tool wear on the surface quality of elements after planing. Research experiments were conducted on the SCM Superset Class machine tool. Glulam elements of pine wood (Pinus sylvestris L.) were researched. The raw material samples (semi-finished products), 6 m long before planing, had been machined by suppliers also by planing. These workpieces were selected according to the plant requirements, e.g. their moisture content, straightness, and other defects. This paper presents the measuring results of surface roughness and some examples of surface profiles, as well as the dependence of total length of the planed elements on the type of blade material. From an economic point of view, the results showed that the use of solid carbide blades were more cost effective.

scholarly journals Pelleting Vineyard Pruning at Low Cost with a Mobile Technology

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2477 ◽  
Author(s):  
Giuseppe Toscano ◽  
Vincenzo Alfano ◽  
Antonio Scarfone ◽  
Luigi Pari
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
Point Of View ◽  
Production Costs ◽  
Direct Production ◽  
Economic Point ◽  
Before And After ◽  
Variable Distance ◽  
Intermediate Storage

The goal of this work was to test a patented pruning harvester and a mobile pelleting system specifically designed for the vineyard agripellet chain. Biomass was characterized before and after storage and after the pelleting stage. The performance, the fuel consumption, and the work quality of the harvester were assessed together with the productivity and the power consumption of the mobile pelleting system. Production costs of pellet were estimated for the whole logistic chain, considering two scenarios: Storage and pelleting directly at the farm site or at a dedicated location at variable distance from the fields. For comparison, the direct production of chips without pelleting was considered. Results indicate that harvester performance was quite good and comparable with commercial solutions; the chips produced exhibited excellent storage performance, allowing direct pelleting without forced drying; the pellet quality was good comparable with that produced from forestry biomass. From an economic point of view, in-field pelleting was the most cost-effective solution, with a good margin of profit up to 57€ t−1; on the other hand, when transport to an intermediate storage center is necessary, profit margin reduces gradually and fades off at an average 50 km distance from the fields.

scholarly journals O impacto econômico dos serviços farmacêuticos na assistência à saúde de pacientes portadores de hipertensão: uma revisão sistemática

2021 ◽  
Vol 13 (1) ◽  
pp. 66-77
Author(s):  
José Ítalo Melo ◽  
◽  
Ana Carolina Matos ◽  
Rodrigo Pinto ◽  
Gabriel Freitas ◽  
...  
Keyword(s):  
Cost Effective ◽  
Pharmaceutical Services ◽  
Point Of View ◽  
Outpatient Clinics ◽  
Current Evidence ◽  
Exclusion Criteria ◽  
Economic Point ◽  
The Cost ◽  
Impacto Económico

Objective: To gather and synthesize current evidence that evaluates Pharmaceutical Services in hypertension, from an economic point of view. Methods: A systematic review of articles published from 2009 to September 2020 in PubMed, Scopus, Lilacs and Cochrane was carried out, following PRISMA guideline. Two reviewers screened and selected independently of the studies, extracted the data and assessed the risk of bias. Results: 2,223 articles excluding duplicates were found in the databases. After analyzing the inclusion and exclusion criteria, 12 studies were included, 8 were experimental and 4 were observational. The PS was performed in community pharmacies, outpatient clinics and hospitals, with interventions performed only by pharmacists or in collaboration with other professionals. Most of the interventions were cost-effective, improving clinical parameters and improving the quality of life. Only one intervention did not show significant results in relation to usual care. Conclusion: PS have been associated with positive economic impacts and interventions have significantly reduced direct medical costs. However, there is a need to develop more robust research, such as randomized and controlled studies, in order to allow a more assertive assessment regarding the cost-effectiveness of pharmaceutical services

The Role of Economic Evaluation in Dissemination and Implementation Research

2017 ◽  
Author(s):  
Ramesh Raghavan
Keyword(s):  
Service Providers ◽  
Implementation Strategies ◽  
Cost Effective ◽  
Point Of View ◽  
Dissemination And Implementation ◽  
Economic Point ◽  
Open Questions ◽  
Public Health Organizations ◽  
Quality Health ◽  
Dissemination And Implementation Research

This chapter presents an overview of how D&I research can be evaluated from an economic point of view. Dissemination and implementation imposes costs upon knowledge purveyors, provider organizations, public health organizations, and payers (including governments). However, whether these added costs will result in improved service delivery and, perhaps more importantly, client outcomes and improvements in population health remain as open questions. If emerging studies reveal that defined implementation strategies are more cost effective than “usual” implementation, then policymakers and service providers will need to resource these added costs of implementation in order to assure the success and sustainability of high-quality health services over the long term.

scholarly journals Comparison between Concentrated Solar Power and Gas-Based Generation in Terms of Economic and Flexibility-Related Aspects in Chile

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1063
Author(s):  
Catalina Hernández Moris ◽  
Maria Teresa Cerda Guevara ◽  
Alois Salmon ◽  
Alvaro Lorca
Keyword(s):  
Natural Gas ◽  
Solar Power ◽  
Renewable Energy Sources ◽  
Cost Effective ◽  
Hybrid Plant ◽  
Point Of View ◽  
Concentrated Solar Power ◽  
Economic Point ◽  
Hybrid Plants ◽  
Cost Of Energy

The energy sector in Chile demands a significant increase in renewable energy sources in the near future, and concentrated solar power (CSP) technologies are becoming increasingly competitive as compared to natural gas plants. Motivated by this, this paper presents a comparison between solar technologies such as hybrid plants and natural gas-based thermal technologies, as both technologies share several characteristics that are comparable and beneficial for the power grid. This comparison is made from an economic point of view using the Levelized Cost of Energy (LCOE) metric and in terms of the systemic benefits related to flexibility, which is very much required due to the current decarbonization scenario of Chile’s energy matrix. The results show that the LCOE of the four hybrid plant models studied is lower than the LCOE of the gas plant. A solar hybrid plant configuration composed of a photovoltaic and solar tower plant (STP) with 13 h of storage and without generation restrictions has an LCOE 53 USD/MWh, while the natural gas technology evaluated with an 85% plant factor and a variable fuel cost of 2.0 USD/MMBtu has an LCOE of 86 USD/MWh. Thus, solar hybrid plants under a particular set of conditions are shown to be more cost-effective than their closest competitor for the Chilean grid while still providing significant dispatchability and flexibility.

scholarly journals USING THE METHOD OF SEQUENTIAL RESTRICTIONS FOR SOLVING A DUAL-OBJECTIVE PROBLEM OF PRODUCTION PLANNING

2020 ◽  
Vol 11 (87) ◽  
Author(s):  
Nataliia Dovha ◽  
◽  
Hryhorii Tsehelyk ◽  
Keyword(s):  
Optimization Problem ◽  
Production Efficiency ◽  
Point Of View ◽  
Main Task ◽  
Production Plan ◽  
Optimal Production ◽  
Economic Point ◽  
Use Of Resources ◽  
Maximum Profit

The processes of optimization of the production plan according to certain criteria by modeling were investigated. Achieving effective results directly depends on the optimal production plan. The most important thing in determining the optimal production plan is the choice of modeling criteria. For the most part, the quality of decisions is characterized not by one but by many incomparable criteria. Therefore, it is necessary to make decisions based not on one but on many criteria. This so-called multi-objective optimization problem. For solving such problems is widely used mathematical methods. Mathematical approach can be used to solve problems in any particular activity as mathematics abstracted from specific features characteristic of a particular solution. Therefore, from the point of view of mathematics, the optimal result can be obtained with various established criteria, but from the economic point of view it is important to choose the ones that are of decisive importance. That is, their weight is important for the consumer when making a purchase decision, and for the manufacturer – in terms of production capabilities of certain types and results (production efficiency). The basis of the operation of any enterprise is a production program (production and sales plan). The main task of the production plan is to meet the needs of consumers in high-quality products, which are produced with the best use of resources, on the one hand, and the enterprise to get the maximum profit, on the other. With this in mind, a two-criteria optimization model that allows to make a production plan was proposed. The plan ensures that products are produced with the best use of available resources and at the same time ensures maximum quality of manufactured products and maximum profit from sales of these products. The solution of the problem with two objective functions and linear constraints is achieved by step-by-step solution of the proposed mathematical model of optimization of the production plan using the method of sequential restrictions. The simplex method was also used. An example shows an algorithm for solving the optimization problem.

Methodological Approach to Assessing the Economic Efficiency of Digital Projects Applying Internet of Things Platforms

2021 ◽  
Vol 152 (6) ◽  
pp. 134-142
Author(s):  
Aleksandr Yu. Mishin ◽  
Keyword(s):  
Internet Of Things ◽  
Economic Efficiency ◽  
Methodological Approach ◽  
Objective Assessment ◽  
Cost Effective ◽  
Scientific Work ◽  
Point Of View ◽  
Scientific Publications ◽  
Economic Point ◽  
Iot Platforms

One of the key ones and most cost-effective technology from an economic point of view for the real sector is the Internet of Things (IoT) technology, which is usually provided in the form of Internet of Things (IoT) platforms, still does not have its own framework for assessing its economic efficiency. The author proposes a methodological approach based on a combination of classical methods of investment analysis and an architectural approach. From the information point of view the scientific work is based on cost-effectiveness studies of IoT projects, domestic and foreign scientific publications, IT cases and research on taxonomy of IoT platforms. The proposed approach may serve as the basis both for preparation of financial business cases and for facilitating the development of tools for objective assessment of the project initiatives attractiveness as part of implementation of the state digital development programs in Russia.

scholarly journals Effect of different staking methods and stem pruning on yield and quality of summer tomato

2016 ◽  
Vol 41 (3) ◽  
pp. 419-432
Author(s):  
MS Alam ◽  
N Islam ◽  
S Ahmad ◽  
MI Hossen ◽  
MR Islam
Keyword(s):  
Fruit Quality ◽  
Fruit Set ◽  
Block Design ◽  
Total Yield ◽  
Point Of View ◽  
Fruit Firmness ◽  
Economic Point ◽  
Yield And Quality ◽  
Agriculture Research Institute

The study was carried out during summer of 2012 with BARI hybrid tomato 4, planted in the Olericulture farm of Bangladesh Agriculture Research Institute, Joydebpur, Gazipur, Bangladesh to find out the response of plants to some staking and pruning treatments on yield, fruit quality and cost of production. A two factor experiment consisting of three staking methods and four level of pruning, laid out in complete block design with three repetitions. Plants were staked on inverted „V? shaped staking, high platform and string. The plants were pruned to two stem, three stem, four stem and no pruning as control. Results showed that significantly the highest total number of fruits per plant (37.1), marketable fruits per plant (33.7), yield per plant (1.68 kg) and total yield (44.6 t/ha) were produced by the plants having the treatment string staking with four stem. The highest fruit set (43.50%) was found in the plants staking with string having three stems. Plants grown on string staking allowing two stem gave the maximum length (4.71 cm), diameter (4.83 cm) and weight (53.4g) of single fruit as well as maximum fruit firmness (3.43 kg-f cm-2). From the economic point of view, it was apparent that summer tomato produced by string staking with four stem pruning exhibited better performance compared to other treatment combinations in relation to net return and BCR (2.10).Bangladesh J. Agril. Res. 41(3): 419-432, September 2016

The Investigation of a Micro-Component Machined on a Custom-built Miniature Machine Tool

2012 ◽  
Vol 59 (2) ◽  
Author(s):  
Syaimak Abdul Shukor
Keyword(s):  
Surface Quality ◽  
Milling Process ◽  
Micro Milling ◽  
Batch Size ◽  
Geometrical Accuracy ◽  
Custom Made ◽  
Micro Parts ◽  
Solid Carbide ◽  
Steel Aisi

Custom-built Miniature Machine Tools (MMTs) are now becoming more popular with the demand for reduced energy consumption and workshop floor when machining small/medium batch size micro-components. This paper investigates the capability of a custom-built 4-axis MMT through machining an “adapted standard‟ of micro-testpiece. The experiments have been carried out in two different materials: Carbon Steel (AISI 1040) and Titanium Alloyed (TiAl6V4) using solid carbide flat end mill cutters with 0.6mm diameter. From here, the surface quality and geometrical accuracy of the machined testpiece are evaluated and analysed. The investigation has shown that acceptable geometrical accuracies and surface quality of the machined micro-parts can be achieved using the in-house developed MMT. These results show that the use of the custom-made MMT does not hinder the micro-milling process to produce a good and satisfactory surface quality (Ra=0.04-0.07μm) and acceptable geometrical accuracy.

scholarly journals On BRT Spread around the World: Analysis of Some Particular Cities

2020 ◽  
Vol 5 (10) ◽  
pp. 88
Author(s):  
Salvatore Trubia ◽  
Alessandro Severino ◽  
Salvatore Curto ◽  
Fabio Arena ◽  
Giovanni Pau
Keyword(s):  
Public Transport ◽  
Autonomous Vehicles ◽  
Social Impact ◽  
High Efficiency ◽  
Civil Engineering ◽  
Road Transport ◽  
Point Of View ◽  
Transport Systems ◽  
Economic Point

The goal of civil engineering has always been the research and implementation of methods, technologies, and infrastructures to improve the community’s quality of life. One of the branches of civil engineering that has the strongest effect on progress is transport. The quality of transport has a profound economic and social impact on our communities regarding trade (freight transport) and city livability (public transport systems). However, innovation is not the only way to improve the features above-mentioned, especially public transport, considering that it is usually beneficial to enhance and repurpose vehicles with appropriate adjustments to offer more efficient services. Other perspectives that influence public transport systems are the costs and times of design and construction, maintenance, operating costs, and environmental impact, especially concerning CO2 emissions. Considering these issues, among the various types of existing public transport systems, those of the so-called Bus Rapid Transit (BRT) offer worthwhile results. The BRT system is a type of public road transport operated by bus on reserved lanes, and it is significantly profitable, especially from an economic point of view, in areas where there are existing bus routes. Nonetheless, for the construction of works minimization, it is closely linked to other features that improve its usefulness, depending on the vehicles’ quality such as capacity, but above all, the propulsion or driving autonomy that would guarantee high efficiency. This paper introduces an analysis of some BRT systems operating worldwide, presenting the background, general technical features, and the correlation with autonomous vehicles.

scholarly journals Tool wear and surface quality of metal matrix composites due to machining: A review

2016 ◽  
Vol 231 (5) ◽  
pp. 739-752 ◽  
Author(s):  
Ferial Hakami ◽  
Alokesh Pramanik ◽  
Animesh K Basak
Keyword(s):  
Tool Wear ◽  
Metal Matrix Composite ◽  
Metal Matrix Composites ◽  
Surface Quality ◽  
Tool Life ◽  
Metal Matrix ◽  
Cutting Tool ◽  
Matrix Composites ◽  
Machined Surface

Higher tool wear and inferior surface quality of the specimens during machining restrict metal matrix composites’ application in many areas in spite of their excellent properties. The researches in this field are not well organized, and knowledge is not properly linked to give a complete overview. Thus, it is hard to implement it in practical fields. To address this issue, this article reviews tool wear and surface generation and latest developments in machining of metal matrix composites. This will provide an insight and scientific overview in this field which will facilitate the implementation of the obtained knowledge in the practical fields. It was noted that the hard reinforcements initially start abrasive wear on the cutting tool. The abrasion exposes new cutting tool surface, which initiates adhesion of matrix material to the cutting tool and thus causes adhesion wear. Built-up edges also generate at lower cutting speeds. Although different types of coating improve tool life, only diamond cutting tools show considerably longer tool life. The application of the coolants improves tool life reasonably at higher cutting speed. Pits, voids, microcracks and fractured reinforcements are common in the machined metal matrix composite surface. These are due to ploughing, indentation and dislodgement of particles from the matrix due to tool–particle interactions. Furthermore, compressive residual stress is caused by the particles’ indentation in the machined surface. At high feeds, the feed rate controls the surface roughness of the metal matrix composite; although at low feeds, it was controlled by the particle fracture or pull out. The coarser reinforced particles and lower volume fraction enhance microhardness variations beneath the machined surface.

Sign in / Sign up

Export Citation Format

Share Document