Temperature impact on delayed fracture of creep-resistant steels welds

2018 ◽  
Vol 1 (88) ◽  
pp. 5-11
Author(s):  
V. Skulskyi ◽  
M. Nimko
Keyword(s):  
Activation Energy ◽  
Low Temperature ◽  
Diffusible Hydrogen ◽  
Delayed Fracture ◽  
Energy Assessment ◽  
Different Temperatures ◽  
Delayed Cracking ◽  
Creep Resistant Steels ◽  
Implant Test ◽  
Cracking Risk

Purpose: Phenomenon of delayed fracture (or cold cracks formation) of hardenable steels weldments had been widely investigated. But temperature dependence of cracking susceptibility remained discussable, because there was no strict vision of temperature border for the cracking risk appearance, when joints are cooling after welding completion. The proposed paper aimed at assessment of dangerous temperature range at which delayed fracture, mainly for the steels with martensite formation, becomes most probable. Design/methodology/approach: The “Implant” test, conducted under isothermal conditions at the temperatures selected within the range from 160 to 20°C on cooling of the completed test weld joint, was used. Basing on the obtained thermokinetic characteristics of the cracking, the activation energy E of the fracture process was calculated. Comparing of the found E values with the close values of E for the known processes developing in steels, the explanation of the revealed cracking behaviour at different temperatures was proposed. Findings: Delayed cracking of the martensitic weld joints has started to manifest at the temperatures lower than 140°C. Dependence of the cracking period from the temperature is described by C-type curve with the minimum cracking duration within 80-100°C. Using the approach of the activation energy assessment for different temperature ranges (140 to 100°C and 80 to 20°C), the effect of the diffusible hydrogen and a martensite decay on the cracking thermokinetics was considered. Research limitations/implications: Additional investigations of the fine microstructure after different stages of the low-temperature martensite decay could be necessary for deepening understanding of a role of this process in the low-temperature heterogeneity formation and cracking susceptibility. Practical implications: Results widen data on weldability of actual for industry steels and give a ground for consideration of the technological approaches for their welding. Originality/value: Temperature border of the cold cracking risk is specified for the weldments of some commercial steels.

LOW TEMPERATURE STUDIES OF THE DIELECTRIC AND ELECTRICAL PARAMETERS OF GLASSY Se90Ge10-xInx

2002 ◽  
Vol 09 (03n04) ◽  
pp. 1379-1385
Author(s):  
S. ABOU EL-HASSAN
Keyword(s):  
Activation Energy ◽  
Dielectric Properties ◽  
Low Temperature ◽  
Localized States ◽  
Frequency Range ◽  
Electrical Parameters ◽  
Cbh Model ◽  
Correlated Barrier Hopping ◽  
Density Of Localized States ◽  
Different Temperatures

The dielectric properties of the system Se 90 Ge 10-x In x (x = 2, 4 and 6 at. %) were studied in the temperature range of 78–273 K and in the frequency range of 400 Hz–20 kHz. The density of localized states N(E) and the activation energy of hopping wk for the samples were deduced at different temperatures. The exponents s, m1 and m2 of the equations σ ac (ω) = Aωs, ε′ = Bωm1 and ε′′ = Cωm2 have been deduced for the samples. The composition and temperature dependence of s, m1, m2, wk and N(E) have been determined. The results are interpreted in terms of the correlated barrier hopping (CBH) model and the concept of localized states.

Influence of annealing on the electrical conductivity of single crystals of Cu2O

1970 ◽  
Vol 48 (1) ◽  
pp. 63-69 ◽  
Author(s):  
F. L. Weichman ◽  
R. Kužel
Keyword(s):  
Activation Energy ◽  
Electrical Conductivity ◽  
Low Temperature ◽  
Single Crystals ◽  
Activation Energies ◽  
Conductivity Measurements ◽  
Different Temperatures ◽  
Temperature Activation ◽  
The Stability ◽  
Stability Ranges

A series of conductivity measurements were made on single crystals of Cu2O from 20 to 840 °C to explain the various activation energies which appear at different temperatures and oxygen pressures. Crystals were annealed in the 10−8 and 10−4 Torr region in the stability ranges of Cu2O, Cu, and CuO at various temperatures. For the low-temperature activation energies ranging from 0.60 to 0.26 eV, an excellent agreement with the empirical Meyer–Neldel rule was found. The highest activation energy of 1.12 eV in the 570 to 680 °C range at 10−8 Torr is associated with the boundary between the two stable phases Cu and Cu2O. The changes in defect concentration are ascribed to the mechanism of self-compensation. The energy-level diagram proposed by Bloem is adequate to explain the present results.

Development of High Permeability Core Materials for Embeddable Inductors in Flexible Organic Substrates

2003 ◽  
Vol 769 ◽  
Author(s):  
C. K. Liu ◽  
P. L. Cheng ◽  
S. Y. Y. Leung ◽  
T. W. Law ◽  
D. C. C. Lam
Keyword(s):  
Low Temperature ◽  
Sol Gel ◽  
Circuit Board ◽  
Organic Substrates ◽  
Circuit Boards ◽  
High Permeability ◽  
Electrical Measurements ◽  
Different Temperatures ◽  
Spiral Inductors ◽  
Ceramic Tape

AbstractCapacitors, resistors and inductors are surface mounted components on circuit boards, which occupy up to 70% of the circuit board area. For selected applications, these passives are packaged inside green ceramic tape substrates and sintered at temperatures over 700°C in a co-fired process. These high temperature processes are incompatible with organic substrates, and low temperature processes are needed if passives are to be embedded into organic substrates. A new high permeability dual-phase Nickel Zinc Ferrite (DP NZF) core fabricated using a low temperature sol-gel route was developed for use in embedded inductors in organic substrates. Crystalline NZF powder was added to the sol-gel precursor of NZF. The solution was deposited onto the substrates as thin films and heat-treated at different temperatures. The changes in the microstructures were characterized using XRD and SEM. Results showed that addition of NZF powder induced low temperature transformation of the sol-gel NZF phase to high permeability phase at 250°C, which is approximately 350°C lower than transformation temperature for pure NZF sol gel films. Electrical measurements of DP NZF cored two-layered spiral inductors indicated that the inductance increased by three times compared to inductors without the DP NZF cores. From microstructural observations, the increase is correlated with the changes in microstructural connectivity of the powder phase.

Pt-Pd Nanoalloy for the Unprecedented Activation of Carbon-Fluorine Bond at Low Temperature

2019 ◽  
Author(s):  
Raghu Nath Dhital ◽  
keigo nomura ◽  
Yoshinori Sato ◽  
Setsiri Haesuwannakij ◽  
Masahiro Ehara ◽  
...  
Keyword(s):  
Activation Energy ◽  
Low Temperature ◽  
Dft Calculations ◽  
Bond Activation ◽  
Mild Conditions ◽  
Selective Transformation ◽  
Rate Determining Step ◽  
Highly Active ◽  
Harsh Conditions ◽  
Reaction Profile

Carbon-Fluorine (C-F) bonds are considered the most inert organic functionality and their selective transformation under mild conditions remains challenging. Herein, we report a highly active Pt-Pd nanoalloy as a robust catalyst for the transformation of C-F bonds into C-H bonds at low temperature, a reaction that often required harsh conditions. The alloying of Pt with Pd is crucial to activate C-F bond. The reaction profile kinetics revealed that the major source of hydrogen in the defluorinated product is the alcoholic proton of 2-propanol, and the rate-determining step is the reduction of the metal upon transfer of the <i>beta</i>-H from 2-propanol. DFT calculations elucidated that the key step is the selective oxidative addition of the O-H bond of 2-propanol to a Pd center prior to C-F bond activation at a Pt site, which crucially reduces the activation energy of the C-F bond. Therefore, both Pt and Pd work independently but synergistically to promote the overall reaction

scholarly journals GERMINATION AND VIGOUR IN SEEDS OF THE COWPEA IN RESPONSE TO SALT AND HEAT STRESS

2019 ◽  
Vol 32 (1) ◽  
pp. 143-151 ◽  
Author(s):  
Luma Rayane de Lima Nunes ◽  
Paloma Rayane Pinheiro ◽  
Charles Lobo Pinheiro ◽  
Kelly Andressa Peres Lima ◽  
Alek Sandro Dutra
Keyword(s):  
Salt Stress ◽  
Heat Stress ◽  
High Temperature ◽  
Low Temperature ◽  
Vigna Unguiculata ◽  
Salt Concentration ◽  
Dry Weight ◽  
Germination Percentage ◽  
Different Types ◽  
Different Temperatures

ABSTRACT Salinity is prejudicial to plant development, causing different types of damage to species, or even between genotypes of the same species, with the effects being aggravated when combined with other types of stress, such as heat stress. The aim of this study was to evaluate the tolerance of cowpea genotypes (Vigna unguiculata L. Walp.) to salt stress at different temperatures. Seeds of the Pujante, Epace 10 and Marataoã genotypes were placed on paper rolls (Germitest®) moistened with different salt concentrations of 0.0 (control), 1.5, 3.0, 4.5 and 6.0 dS m-1, and placed in a germination chamber (BOD) at temperatures of 20, 25, 30 and 35°C. The experiment was conducted in a completely randomised design, in a 3 × 4 × 5 scheme of subdivided plots, with four replications per treatment. The variables under analysis were germination percentage, first germination count, shoot and root length, and total seedling dry weight. At temperatures of 30 and 35°C, increases in the salt concentration were more damaging to germination in the Epace 10 and Pujante genotypes, while for the Marataoã genotype, damage occurred at the temperature of 20°C. At 25°C, germination and vigour in the genotypes were higher, with the Pujante genotype proving to be more tolerant to salt stress, whereas Epace 10 and Marataoã were more tolerant to high temperatures. Germination in the cowpea genotypes was more sensitive to salt stress when subjected to heat stress caused by the low temperature of 20°C or high temperature of 35°C.

scholarly journals Kinetics and thermodynamic properties related to the drying of 'Cabacinha' pepper fruits

2016 ◽  
Vol 20 (2) ◽  
pp. 174-180 ◽  
Author(s):  
Hellismar W. da Silva ◽  
Renato S. Rodovalho ◽  
Marya F. Velasco ◽  
Camila F. Silva ◽  
Luís S. R. Vale
Keyword(s):  
Experimental Data ◽  
Activation Energy ◽  
Free Energy ◽  
Thermodynamic Properties ◽  
Gibbs Free Energy ◽  
Removal Rate ◽  
Effective Diffusion ◽  
Drying Time ◽  
Three Samples ◽  
Different Temperatures

ABSTRACT The objective of this study was to determine and model the drying kinetics of 'Cabacinha' pepper fruits at different temperatures of the drying air, as well as obtain the thermodynamic properties involved in the drying process of the product. Drying was carried out under controlled conductions of temperature (60, 70, 80, 90 and 100 °C) using three samples of 130 g of fruit, which were weighed periodically until constant mass. The experimental data were adjusted to different mathematical models often used in the representation of fruit drying. Effective diffusion coefficients, calculated from the mathematical model of liquid diffusion, were used to obtain activation energy, enthalpy, entropy and Gibbs free energy. The Midilli model showed the best fit to the experimental data of drying of 'Cabacinha' pepper fruits. The increase in drying temperature promoted an increase in water removal rate, effective diffusion coefficient and Gibbs free energy, besides a reduction in fruit drying time and in the values of entropy and enthalpy. The activation energy for the drying of pepper fruits was 36.09 kJ mol-1.

scholarly journals Superior Degradation Performance of Nanoporous Copper Catalysts on Methyl Orange

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 913
Author(s):  
Jinyi Wang ◽  
Sen Yang
Keyword(s):  
Activation Energy ◽  
Methyl Orange ◽  
High Efficiency ◽  
Low Cost ◽  
Degradation Process ◽  
Copper Catalysts ◽  
Reaction Rate Constant ◽  
Nanoporous Structure ◽  
Intra Particle Diffusion ◽  
Different Temperatures

The development of low-cost and high-efficiency catalysts for wastewater treatment is of great significance. Herein, nanoporous Cu/Cu2O catalysts were synthesized from MnCu, MnCuNi, and MnCuAl with similar ligament size through one-step dealloying. Meanwhile, the comparisons of three catalysts in performing methyl orange degradation were investigated. One of the catalysts possessed a degradation efficiency as high as 7.67 mg·g−1·min−1. With good linear fitting by the pseudo-first-order model, the reaction rate constant was evaluated. In order to better understand the degradation process, the adsorption behavior was considered, and it was divided into three stages based on the intra-particle diffusion model. Three different temperatures were applied to explore the activation energy of the degradation. As a photocatalytic agent, the nanoporous structure of Cu/Cu2O possessed a large surface area and it also had low activation energy, which were beneficial to the excellent degradation performance.

A Method for Predicting the Behavior of Plastics at Different Temperatures

2014 ◽  
Vol 1039 ◽  
pp. 107-111
Author(s):  
Yang Chen ◽  
Gui Qin Li ◽  
Bin Ruan ◽  
Xiao Yuan ◽  
Hong Bo Li
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Constitutive Model ◽  
Research And Development ◽  
Mechanical Behavior ◽  
Plastic Material ◽  
Different Temperatures ◽  
Plastic Parts

The mechanical behavior of plastic material is dramatically sensitive to temperature. An method is proposed to predict the mechanical behavior of plastics for cars, ranging from low-temperature low temperature ≤-40°C to high temperature ≥80°C. It dominates the behavior of plastic material based on improved constitutive model in which the parameters adjusted by a series of tests under different temperatures. The method is validated with test and establishes the basis for research and development of plastic parts for automobile as well.

ON THE DIELECTRIC BEHAVIOR OF LiCo3/5Fe2/5VO4 CERAMICS

2010 ◽  
Vol 24 (07) ◽  
pp. 665-670
Author(s):  
MOTI RAM
Keyword(s):  
Activation Energy ◽  
Dielectric Constant ◽  
Frequency Dependence ◽  
Chemical Method ◽  
Arrhenius Plot ◽  
Dielectric Behavior ◽  
Tangent Loss ◽  
Low Frequencies ◽  
Different Temperatures ◽  
Tan Δ

The LiCo 3/5 Fe 2/5 VO 4 ceramics has been fabricated by solution-based chemical method. Frequency dependence of the dielectric constant (εr) at different temperatures exhibits a dispersive behavior at low frequencies. Temperature dependence of εr at different frequencies indicates the dielectric anomalies in εr at Tc (transition temperature) = 190°C, 223°C, 263°C and 283°C with (εr) max ~ 5370, 1976, 690 and 429 for 1, 10, 50 and 100 kHz, respectively. Frequency dependence of tangent loss ( tan δ) at different temperatures indicates the presence of dielectric relaxation in the material. The value of activation energy estimated from the Arrhenius plot of log (τd) with 103/T is ~(0.396 ± 0.012) eV.

Sign in / Sign up

Export Citation Format

Share Document