Smart Coatings with Carbon Nanoparticles

2020 ◽  
Author(s):  
Xoan Xosé Fernández Sánchez-Romate ◽  
Alberto Jiménez Suárez ◽  
Silvia González Prolongo
Keyword(s):  
Polymer Matrix ◽  
Carbon Nanoparticles ◽  
Barrier Properties ◽  
Polymer Coatings ◽  
Organic Coatings ◽  
Lotus Effect ◽  
Smart Coatings ◽  
Potential Applications ◽  
Surface Damages ◽  
New Generation

Smart coatings based on polymer matrix doped with carbon nanoparticles, such as carbon nanotubes or graphene, are being widely studied. The addition of carbon nanofillers into organic coatings usually enhances their performance, increasing their barrier properties, corrosion resistance, hardness, and wear strength. Moreover, the developed composites provide a new generation of protective organic coatings, being able to intelligently respond to damage or external stimuli. Carbon nanoparticles induce new functionalities to polymer coatings, most of them related to the higher electrical conductivity of nanocomposite due to the formation of percolation network. These coatings can be used as strain sensors and gauges, based on the variation of their electrical resistance (structural health monitoring, SHM). In addition, they act as self-heaters by the application of electrical voltage associated to resistive heating by Joule effect. This opens new potential applications, particularly deicing and defogging coatings. Superhydrophobic and self-cleaning coatings are inspired from lotus effect, designing micro- and nanoscaled hierarchical surfaces. Coatings with self-healable polymer matrix are able to repair surface damages. Other relevant smart capabilities of these new coatings are flame retardant, lubricating, stimuli-chromism, and antibacterial activity, among others.

scholarly journals Low-Density Polyethylene Films Carrying ferula asafoetida Extract for Active Food Packaging: Thermal, Mechanical, Optical, Barrier, and Antifungal Properties

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Razieh Niazmand ◽  
Bibi Marzieh Razavizadeh ◽  
Farzaneh Sabbagh
Keyword(s):  
Polymer Matrix ◽  
Food Packaging ◽  
Barrier Properties ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Optical Barrier ◽  
Leaf Extracts ◽  
Polyethylene Films ◽  
Active Food Packaging ◽  
Ferula Asafoetida

The physical, thermal, mechanical, optical, microstructural, and barrier properties of low-density polyethylene films (LDPE) containing ferula asafoetida leaf and gum extracts were investigated. Results showed a reduction in elasticity and tensile strength with increasing extract concentration in the polymer matrix. The melting temperature and enthalpy increased with increasing concentration of extracts. The films containing extracts had lower L∗ and a∗ and higher b∗ indices. The films containing leaf extract had more barrier potential to UV than the gum extracts. The oxygen permeability in films containing 5% of leaf and gum extracts increased by 2.3 and 2.1 times, respectively. The morphology of the active films was similar to bubble swollen islands, which was more pronounced at higher concentrations of gum and leaf extracts. FTIR results confirmed some chemical interactions of ferula extracts with the polymer matrix. At the end of day 14th, the growth rate of Aspergillus niger and Saccharomyces cerevisea in the presence of the PE-Gum-5 reduced more than PE-Leaf-5 (3.7 and 2.4 logarithmic cycles, respectively) compared to the first day. Our findings showed that active LDPE films have desire thermo-mechanical and barrier properties for food packaging.

scholarly journals A Review on Electroporation-Based Intracellular Delivery

Molecules ◽  
2018 ◽  
Vol 23 (11) ◽  
pp. 3044 ◽  
Author(s):  
Junfeng Shi ◽  
Yifan Ma ◽  
Jing Zhu ◽  
Yuanxin Chen ◽  
Yating Sun ◽  
...  
Keyword(s):  
Viral Vectors ◽  
Safety Issue ◽  
Intracellular Delivery ◽  
Cellular Reprogramming ◽  
Gene Therapies ◽  
Potential Safety ◽  
Potential Applications ◽  
Dose Control ◽  
Intracellular Probe ◽  
New Generation

Intracellular delivery is a critical step in biological discoveries and has been widely utilized in biomedical research. A variety of molecular tools have been developed for cell-based gene therapies, including FDA approved CAR-T immunotherapy, iPSC, cell reprogramming and gene editing. Despite the inspiring results of these applications, intracellular delivery of foreign molecules including nucleic acids and proteins remains challenging. Efficient yet non-invasive delivery of biomolecules in a high-throughput manner has thus long fascinates the scientific community. As one of the most popular non-viral technologies for cell transfection, electroporation has gone through enormous development with the assist of nanotechnology and microfabrication. Emergence of miniatured electroporation system brought up many merits over the weakness of traditional electroporation system, including precise dose control and high cell viability. These new generation of electroporation systems are of considerable importance to expand the biological applications of intracellular delivery, bypassing the potential safety issue of viral vectors. In this review, we will go over the recent progresses in the electroporation-based intracellular delivery and several potential applications of cutting-edge research on the miniatured electroporation, including gene therapy, cellular reprogramming and intracellular probe.

Adhesion and Electrical Insulation of Thin Polymeric Coatings Under Saline Exposure

1987 ◽  
Vol 110 ◽  
Author(s):  
R. N. Leyden ◽  
D. I. Basiulis
Keyword(s):  
Barrier Properties ◽  
Peel Strength ◽  
Polymer Coatings ◽  
Polymeric Coatings ◽  
Adhesive Failure ◽  
Short Term ◽  
Leakage Currents ◽  
Electrical Bias ◽  
Implanted Devices

AbstractA study was made of the adhesion of insulating polymer coatings under long term exposure to electrical bias. Since a common mode of failure in implanted devices is the penetration of water into poorly adhering insulation/conductor interfaces followed by electrolytic degradation, development of processes, primers, and insulators with good adhesion that resist the effects of water were sought. Polyimide coatings were tested for their ion barrier properties by immersion of insulated comb patterns in saline with 9 V D.C. bias between the comb fingers. Leakage currents, measured over three years exposure, increased from several picoamps initially to several nanoamps in surviving specimens. Subsequent studies showed that dramatic improvements in the moisture durability of the adhesion could be obtained using Hitachi's aluminum chelate type primer. Whereas the peel strength of polyimide on unprimed platinum fell more than 90% after several hours of boiling saline exposure, the peel strength of polyimide coatings on primed surfaces remained at over 80% of their initial values. ESCA analysis of the peel interfaces showed that both aluminum oxide and polyimide remain on the substrate after peeling back the polyimide. This suggests a combination of cohesive and adhesive failure at the primer/polyimide interface. The effects of exposure of the polymer/substrate interfaces (edges) to saline and electrochemical stress were examined by patterning circular openings in the polyimide. A 10 V anodic potential was found to damage adhesion to titanium as far as 75 microns away from the edge. Pulsing at 500 Hz, 1 V peak to peak was found to have no measurable effect in the short term.

The effect of plasticization on the properties of poly(urethaneureas) based on oligoether diols, 2,4-toluenediisocyanate, and aromatic diamines

2018 ◽  
Vol 51 (4) ◽  
pp. 337-358 ◽  
Author(s):  
Vasiliy Tereshatov ◽  
Marina Makarova ◽  
Valeriy Senichev ◽  
Zhanna Vnutskikh ◽  
Tamara Oshchepkova ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Polymer Matrix ◽  
Arctic Climate ◽  
The Arctic ◽  
Aromatic Diamines ◽  
Plasticization Effect ◽  
Soft Segments ◽  
Potential Applications ◽  
Partial Crystallization ◽  
First Time

Segmented poly(urethaneureas) (SPUUs) modified with low glass transition temperature chemically inert liquids are of interest due to their controllable properties and potential applications under various environmental conditions. Investigation into the influence of plasticizers on the properties of SPUUs based on oligotetramethyleneoxide diol (polytetramethyleneoxide), oligopropyleneoxide diol (polypropyleneoxide), 2,4-toluenediisocyanate, Ethacure-300, and methylene-bis- o-chloroaniline was conducted. Partial crystallization of polytetramethyleneoxide segments was identified during cooling of some SPUU samples plasticized by di-(2-ethylhexyl)sebacate (DEHS) and tributyl phosphate. Polypropyleneoxide segments did not crystallize under the same conditions. A low crystallization temperature for the amorphous component of the polymer matrix in SPUU (−100°C to 103°C) was attained at a molecular mass ( Mn) of soft segments equal to 2000 g mol−1 and a DEHS concentration equal to 40–45%. A relationship between the mechanical properties of plasticized SPUU, microphase segregation, and dilution of the polymer matrix was found. For the first time, the effect of dilution with plasticizer on the strength of elastomers was considered. The plasticization effect on the mechanical properties of SPUU was investigated in the temperature diapason from 50°C to −70°C. The results of these investigations can be used in various technologies including the design of SPUUs with high elastic properties at temperatures as low as −70°C, typical of extreme conditions of the Arctic climate.

Recent Advances in Polymer-Based Nanocomposites: A Brief Review

2021 ◽  
Vol 13 ◽  
Author(s):  
S. K. Parida
Keyword(s):  
Electrical Properties ◽  
Polymer Nanocomposites ◽  
Polymer Matrix ◽  
Polymer Nanocomposite ◽  
Review Article ◽  
Nanosized Particles ◽  
Mechanical And Electrical Properties ◽  
Potential Applications ◽  
Manufacturing Techniques ◽  
Host Polymer

: This presented review article is constructed to be an extensive source for polymer nanocomposite researchers covering the relation of structure with property, manufacturing techniques, and potential applications when a small number of nanosized particles are added to a host polymer matrix. The exceptional structural, mechanical, and electrical properties of polymer nanocomposites after the addition of inorganic solid nanoparticles are elucidated by the large surface area of doped nanoparticles that interact with host polymer matrices. Due to the generation of ideas, the conventional methods of preparation of polymer nanocomposites are made more interesting. Hence, this brief review presents a sketch of different synthesis techniques, characterization, applications, and safety concerns for polymer nanocomposites.

VOLTAGE-CONTROLLED MAGNETIC ANISOTROPY IN SPINTRONIC DEVICES

SPIN ◽  
2012 ◽  
Vol 02 (03) ◽  
pp. 1240002 ◽  
Author(s):  
PEDRAM KHALILI AMIRI ◽  
KANG L. WANG
Keyword(s):  
Magnetic Anisotropy ◽  
Random Access ◽  
Magnetic Tunnel Junction ◽  
Magnetic Films ◽  
Magnetization Dynamics ◽  
Spintronic Devices ◽  
Magnetic Random Access Memory ◽  
Thin Magnetic Films ◽  
Potential Applications ◽  
New Generation

Electric-field-control of magnetism can dramatically improve the energy efficiency of spintronic devices and enhance the performance of magnetic memories. More generally, it expands the range of applications of nonvolatile spintronic devices, by making them energetically competitive compared to conventional semiconductor solutions for logic and computation, thereby potentially enabling a new generation of ultralow-power nonvolatile spintronic systems. This paper reviews recent experiments on the voltage-controlled magnetic anisotropy (VCMA) effect in thin magnetic films, and their device implications. The interfacial perpendicular anisotropy in layered magnetic material stacks, as well as its modulation by voltage, are discussed. Ferromagnetic resonance experiments and VCMA-induced high-frequency magnetization dynamics are reviewed. Finally, we discuss recent progress on voltage-induced switching of magnetic tunnel junction devices and its potential applications to magnetic random access memory (MRAM).

The Use of Organic Coatings to Promote Dropwise Condensation of Steam

1987 ◽  
Vol 109 (3) ◽  
pp. 768-774 ◽  
Author(s):  
K. M. Holden ◽  
A. S. Wanniarachchi ◽  
P. J. Marto ◽  
D. H. Boone ◽  
J. W. Rose
Keyword(s):  
Heat Transfer ◽  
Atmospheric Pressure ◽  
Polymer Coatings ◽  
Organic Coatings ◽  
Major Constituent ◽  
Dropwise Condensation ◽  
Test Results ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Sustained Performance

Fourteen polymer coatings were evaluated for their ability to promote and sustain dropwise condensation of steam. Nine of the coatings employed a fluoropolymer as a major constituent; four employed hydrocarbons and one a silicone. Each coating was applied to 25-mm-square by approximately 1-mm-thick metal substrates of brass, copper, copper–nickel, and titanium. While exposed to steam at atmospheric pressure, each coating was visually evaluated for its ability to promote dropwise condensation. Observations were also conducted over a period of 22,000 hr. Hardness and adhesion tests were performed on selected specimens. On the basis of sustained performance, six coatings were selected for application to the outside of 19-mm-dia copper tubes in order to perform a heat transfer evaluation. These tubes were mounted horizontally in a separate apparatus through which steam flowed vertically downward. Steam-side heat transfer coefficients were inferred from overall measurements. Test results indicate that the steam-side heat transfer coefficient can be increased by a factor of five to eight through the use of polymer coatings to promote dropwise condensation.

scholarly journals Antibacterial Properties of Silver-Loaded Plasma Polymer Coatings

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Lydie Ploux ◽  
Mihaela Mateescu ◽  
Karine Anselme ◽  
Krasimir Vasilev
Keyword(s):  
Polymer Matrix ◽  
Plasma Polymerization ◽  
Antibacterial Effect ◽  
Antibacterial Properties ◽  
Polymer Coatings ◽  
Plasma Polymer ◽  
Surprising Result ◽  
Cultivable Bacteria ◽  
Planktonic Bacteria ◽  
Loaded Material

In a previous paper, we proposed new silver nanoparticles (SNPs) based antibacterial coatings able to protect eukaryotic cells from SNPs related toxic effects, while preserving antibacterial efficiency. A SNPs containing n-heptylamine (HA) polymer matrix was deposited by plasma polymerization and coated by a second HA layer. In this paper, we elucidate the antibacterial action of these new coatings. We demonstrated that SNPs-loaded material can be covered by thin HA polymer layer without losing the antibacterial activity to planktonic bacteria living in the near surroundings of the material. SNPs-containing materials also revealed antibacterial effect on adhered bacteria. Adhered bacteria number was significantly reduced compared to pure HA plasma polymer and the physiology of the bacteria was affected. The number of adhered bacteria directly decreased with thickness of the second HA layer. Surprisingly, the quantity of cultivable bacteria harvested by transfer to nutritive agar decreased not only with the presence of SNPs, but also in relation to the covering HA layer thickness, that is, oppositely to the increase in adhered bacteria number. Two hypotheses are proposed for this surprising result (stronger attachment or weaker vitality), which raises the question of the diverse potential ways of action of SNPs entrapped in a polymer matrix.

Muscling in on microarrays

2008 ◽  
Vol 33 (1) ◽  
pp. 124-129 ◽  
Author(s):  
Carl Virtanen ◽  
Mark Takahashi
Keyword(s):  
Gene Expression ◽  
High Throughput ◽  
Dna Microarrays ◽  
Gene Expression Analysis ◽  
Exercise Physiology ◽  
Regulation Of Gene Expression ◽  
Enormous Amount ◽  
Potential Applications ◽  
New Generation ◽  
Affect Gene Expression

Adaptations that are the result of exercise require a multitude of changes at the level of gene expression. The mechanisms involved in regulating these changes are many, and can occur at various points in the pathways that affect gene expression. The completion of the human genome sequence, along with the genomes of related species, has provided an enormous amount of information to help dissect and understand these pathways. High-throughput methods, such as DNA microarrays, were the first on the scene to take advantage of this wealth of information. A new generation of microarrays has now taken the next step in revealing the mechanisms controlling gene expression. Analysis of the regulation of gene expression can now be profiled in a high-throughput fashion. However, the application of this technology has yet to be fully realized in the exercise physiology community. This review will highlight some of the latest advances in microarrays and briefly discuss some potential applications to the field of exercise physiology.

Sign in / Sign up

Export Citation Format

Share Document