scholarly journals Nano-Cellulosic Fibers from Agricultural Wastes

2021 ◽  
Author(s):  
Nozieana Khairuddin ◽  
Md. Bazlul Mobin Siddique ◽  
Mohammad Sobri Merais ◽  
Nurul Husna Che Hamzah ◽  
Dayangku Nurshahirah Awang Wahab
Keyword(s):  
Mechanical Properties ◽  
Cellulose Nanofibers ◽  
Morphological Characteristics ◽  
Value Added ◽  
Cellulose Fibers ◽  
Agricultural Wastes ◽  
Packaging Materials ◽  
Top Down ◽  
Cellulosic Fibers ◽  
Cellulose Nanomaterials

In recent years, the potential of agricultural wastes has received increasing attention from academia and industry. The aim has been to identify strategies for the conversion of low-value wastes into new materials and other value-added products. Cellulose is a naturally abundant polymer that is readily available in various agricultural wastes. It is a linear polymer consisting of β-D-glucopyranose units (disaccharides) joined by glycosidic β-1,4 bonds. Nanoparticles can be extracted from cellulose fibers using a top-down mechanically or chemically treatment. Cellulose nanomaterials have generated significant interest due to their intrinsic properties such as large surface-to-volume ratios, high tensile strength, stiffness, and flexibility in addition to good dynamic mechanical, electrical, and thermal properties. The use of nanocellulose for reinforcement in matrices improves thermo-mechanical properties, decreases the sensitivity of polymers to water, and preserves biodegradability. The mixing of nanocellulose with polysaccharides improves mechanical properties. Nano-sized cellulose fibers possess unique physical, chemical, and morphological characteristics. Hence, nano-sized cellulose fibers are considered versatile materials for addition to polymers, and application in high gas barriers and packaging materials. Other uses include electronic devices, foods, medicine, cosmetics, and health care. This chapter focuses on the cellulose nanofibers attained from banana, pineapple and corn-based agricultural wastes.

scholarly journals Influence of Thermal Treatment on Mechanical and Morphological Characteristics of Polyamide 11/Cellulose Nanofiber Nanocomposites

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Denis Mihaela Panaitescu ◽  
Raluca Augusta Gabor ◽  
Adriana Nicoleta Frone ◽  
Eugeniu Vasile
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermal Treatment ◽  
Cellulose Nanofibers ◽  
Morphological Characteristics ◽  
Nanocomposite Films ◽  
Polyamide 11 ◽  
Dynamic Mechanical ◽  
The Matrix ◽  
The Impact

Nanocomposite films were prepared from polyamide 11 (PA11) and cellulose nanofibers (CN) by melt compounding and compression molding. The impact of thermal treatment on the morphology and mechanical behavior of PA11 and nanocomposite films was studied using dynamic mechanical analysis, tensile tests, X-ray diffraction (XRD), and peak force (PF) QNM technique. Slightly higher storage modulus values were obtained for nanocomposites compared to the matrix before the treatment, but a noticeable increase was observed after the treatment. Although CN addition determined increased tensile strength and modulus both before and after the treatment, the increase was much more significant in the case of treated films. The best mechanical properties were shown by treated PA11 films containing 5 wt% CN, with 40% higher Young’s modulus and with 35% higher tensile strength compared to the matrix. Some of the changes pointed out by static and dynamic mechanical tests were explained by the morphological changes determined by the thermal treatment and emphasized by PF QNM and by the increase of XRD crystallinity. A transition from lamellar stack morphology to one involving spherulites was highlighted by AFM. Thermal treatment has proved a valuable method for improving the mechanical properties of PA11/CN composites.

scholarly journals Research on the Strengthening Advantages on Using Cellulose Nanofibers as Polyvinyl Alcohol Reinforcement

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 974 ◽  
Author(s):  
Quim Tarrés ◽  
Helena Oliver-Ortega ◽  
Manel Alcalà ◽  
F. Xavier Espinach ◽  
Pere Mutjé ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Polyvinyl Alcohol ◽  
High Performance ◽  
Cellulose Nanofibers ◽  
Cellulosic Fibers ◽  
Reinforcement Content ◽  
Superior Mechanical Properties ◽  
Coupling Factors ◽  
Internal Mixer

The present work aims to combine the unique properties of cellulose nanofibers (CNF) with polyvinyl alcohol (PVA) to obtain high-performance nanocomposites. CNF were obtained by means of TEMPO-mediated ((2,2,6,6-Tetramethylpiperidin-1-yl)oxyl) oxidation, incorporated into the PVA matrix by means of compounding in a single-screw co-rotating internal mixer and then processed by means of injection molding. It was found that CNF were able to improve the tensile strength of PVA in 85% when 4.50 wt % of CNF were added. In addition, the incorporation of a 2.25 wt % of CNF enhanced the tensile strength to the same level that when 40 wt % of microsized fibers (stone groundwood pulp, SGW) were incorporated, which indicated that CNF possessed significantly higher intrinsic mechanical properties than microsized fibers. SGW was selected as reference for microsized fibers due to their extended use in wood plastic composites. Finally, a micromechanical analysis was performed, obtaining coupling factors near to 0.2, indicating good interphase between CNF and PVA. Overall, it was found that the use of CNF is clearly advantageous to the use of common cellulosic fibers if superior mechanical properties are desired, but there are still some limitations that are related to processing that restrict the reinforcement content at low contents.

Strength Properties of Cellulose Nanofiber Green Composites

2011 ◽  
Vol 462-463 ◽  
pp. 576-581 ◽  
Author(s):  
Hitoshi Takagi
Keyword(s):  
Mechanical Properties ◽  
Cellulose Nanofibers ◽  
Cellulose Fibers ◽  
Tensile Tests ◽  
Strength Properties ◽  
Cellulose Nanofiber ◽  
Green Composites ◽  
Nanofiber Composite ◽  
Reinforced Plastics ◽  
Glass Fiber Reinforced

Environmentally friendly cellulose nanofiber green composites were newly developed by combining two dispersion-type biodegradable resins: polylactic acid (PLA) and chemically modified starch, and cellulose nanofibers of two kinds. The nanoscale cellulose fibers were prepared by homogenization of wood pulp. The 10–100 nm diameter nanoscale cellulose fibers have a web-like network microstructure. The mixture of dispersion-type biodegradable resin and cellulose nanofibers was dried in an air-circulating oven to make composite preform sheets. Cellulose nanofiber composite samples were fabricated by press-forming of the preform sheets. Their mechanical properties were evaluated using room-temperature tensile tests. The composite composed of PLA-based resin and highly homogenized cellulose nanofibers showed higher mechanical properties than those of starch-based resin and coarse cellulose fibers. It is suggested that coarse cellulose fibers act as a defect, resulting in low mechanical properties. Maximum tensile strength reaches approximately 90 MPa at fiber weight contents of 60% by weight. This mechanical property is comparable to that of conventional glass-fiber-reinforced plastics.

scholarly journals Effects of a Twin-Screw Extruder Equipped with a Molten Resin Reservoir on the Mechanical Properties and Microstructure of Recycled Waste Plastic Polyethylene Pellet Moldings

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1058
Author(s):  
Hikaru Okubo ◽  
Haruka Kaneyasu ◽  
Tetsuya Kimura ◽  
Patchiya Phanthong ◽  
Shigeru Yao
Keyword(s):  
Mechanical Properties ◽  
Mechanical Performance ◽  
Value Added ◽  
Industrial Applications ◽  
Twin Screw Extruder ◽  
Screw Extruder ◽  
Polymer Properties ◽  
Wide Range ◽  
Twin Screw ◽  
Recycled Plastics

Each year, increasing amounts of plastic waste are generated, causing environmental pollution and resource loss. Recycling is a solution, but recycled plastics often have inferior mechanical properties to virgin plastics. However, studies have shown that holding polymers in the melt state before extrusion can restore the mechanical properties; thus, we propose a twin-screw extruder with a molten resin reservoir (MSR), a cavity between the screw zone and twin-screw extruder discharge, which retains molten polymer after mixing in the twin-screw zone, thus influencing the polymer properties. Re-extruded recycled polyethylene (RPE) pellets were produced, and the tensile properties and microstructure of virgin polyethylene (PE), unextruded RPE, and re-extruded RPE moldings prepared with and without the MSR were evaluated. Crucially, the elongation at break of the MSR-extruded RPE molding was seven times higher than that of the original RPE molding, and the Young’s modulus of the MSR-extruded RPE molding was comparable to that of the virgin PE molding. Both the MSR-extruded RPE and virgin PE moldings contained similar striped lamellae. Thus, MSR re-extrusion improved the mechanical performance of recycled polymers by optimizing the microstructure. The use of MSRs will facilitate the reuse of waste plastics as value-added materials having a wide range of industrial applications.

scholarly journals Influence of Alkali Treatment on the Microstructure and Mechanical Properties of Coir and Abaca Fibers

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2636
Author(s):  
Petr Valášek ◽  
Miroslav Müller ◽  
Vladimír Šleger ◽  
Viktor Kolář ◽  
Monika Hromasová ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Alkali Treatment ◽  
Fiber Surface ◽  
Cellulose Fibers ◽  
Sem Analysis ◽  
Experimental Program ◽  
Time Interval ◽  
The European Union ◽  
Vegetable Fibers

Composite materials with natural fillers have been increasingly used as an alternative to synthetically produced materials. This trend is visible from a representation of polymeric composites with natural cellulose fibers in the automotive industry of the European Union. This trend is entirely logical, owing to a preference for renewable resources. The experimental program itself follows pronounced hypotheses and focuses on a description of the mechanical properties of untreated and alkali-treated natural vegetable fibers, coconut and abaca fibers. These fibers have great potential for use in composite materials. The results and discussion sections contribute to an introduction of an individual methodology for mechanical property assessment of cellulose fibers, and allows for a clear definition of an optimal process of alkalization dependent on the content of hemicellulose and lignin in vegetable fibers. The aim of this research was to investigate the influence of alkali treatment on the surface microstructure and tensile properties of coir and abaca fibers. These fibers were immersed into a 5% solution of NaOH at laboratory temperature for a time interval of 30 min, 1 h, 2 h, 3 h, 6 h, 12 h, 24 h, and 48 h, rinsed and dried. The fiber surface microstructures before and after the alkali treatment were evaluated by SEM (scanning electron microscopy). SEM analysis showed that the alkali treatment in the NaOH solution led to a gradual connective material removal from the fiber surface. The effect of the alkali is evident from the visible changes on the surface of the fibers.

scholarly journals Functional Bionanocomposite Fibers of Chitosan Filled with Cellulose Nanofibers Obtained by Gel Spinning

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1563
Author(s):  
Sofia Marquez-Bravo ◽  
Ingo Doench ◽  
Pamela Molina ◽  
Flor Estefany Bentley ◽  
Arnaud Kamdem Tamo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Performance ◽  
Cellulose Nanofibers ◽  
Microstructural Characterization ◽  
Fiber Formation ◽  
Fiber Direction ◽  
Composite Fibers ◽  
X Ray Diffraction ◽  
Gel Spinning ◽  
X Ray

Extremely high mechanical performance spun bionanocomposite fibers of chitosan (CHI), and cellulose nanofibers (CNFs) were successfully achieved by gel spinning of CHI aqueous viscous formulations filled with CNFs. The microstructural characterization of the fibers by X-ray diffraction revealed the crystallization of the CHI polymer chains into anhydrous chitosan allomorph. The spinning process combining acidic–basic–neutralization–stretching–drying steps allowed obtaining CHI/CNF composite fibers of high crystallinity, with enhanced effect at incorporating the CNFs. Chitosan crystallization seems to be promoted by the presence of cellulose nanofibers, serving as nucleation sites for the growing of CHI crystals. Moreover, the preferential orientation of both CNFs and CHI crystals along the spun fiber direction was revealed in the two-dimensional X-ray diffraction patterns. By increasing the CNF amount up to the optimum concentration of 0.4 wt % in the viscous CHI/CNF collodion, Young’s modulus of the spun fibers significantly increased up to 8 GPa. Similarly, the stress at break and the yield stress drastically increased from 115 to 163 MPa, and from 67 to 119 MPa, respectively, by adding only 0.4 wt % of CNFs into a collodion solution containing 4 wt % of chitosan. The toughness of the CHI-based fibers thereby increased from 5 to 9 MJ.m−3. For higher CNFs contents like 0.5 wt %, the high mechanical performance of the CHI/CNF composite fibers was still observed, but with a slight worsening of the mechanical parameters, which may be related to a minor disruption of the CHI matrix hydrogel network constituting the collodion and gel fiber, as precursor state for the dry fiber formation. Finally, the rheological behavior observed for the different CHI/CNF viscous collodions and the obtained structural, thermal and mechanical properties results revealed an optimum matrix/filler compatibility and interface when adding 0.4 wt % of nanofibrillated cellulose (CNF) into 4 wt % CHI formulations, yielding functional bionanocomposite fibers of outstanding mechanical properties.

scholarly journals Starch–Mucilage Composite Films: An Inclusive on Physicochemical and Biological Perspective

Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2588
Author(s):  
Mansuri M. Tosif ◽  
Agnieszka Najda ◽  
Aarti Bains ◽  
Grażyna Zawiślak ◽  
Grzegorz Maj ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Barrier Properties ◽  
Edible Films ◽  
Packaging Material ◽  
Polymer Materials ◽  
Synthesis Process ◽  
Packaging Materials ◽  
Packaging Film ◽  
Biodegradable Packaging ◽  
Effective Manner

In recent years, scientists have focused on research to replace petroleum-based components plastics, in an eco-friendly and cost-effective manner, with plant-derived biopolymers offering suitable mechanical properties. Moreover, due to high environmental pollution, global warming, and the foreseen shortage of oil supplies, the quest for the formulation of biobased, non-toxic, biocompatible, and biodegradable polymer films is still emerging. Several biopolymers from varied natural resources such as starch, cellulose, gums, agar, milk, cereal, and legume proteins have been used as eco-friendly packaging materials for the substitute of non-biodegradable petroleum-based plastic-based packaging materials. Among all biopolymers, starch is an edible carbohydrate complex, composed of a linear polymer, amylose, and amylopectin. They have usually been considered as a favorite choice of material for food packaging applications due to their excellent forming ability, low cost, and environmental compatibility. Although the film prepared from bio-polymer materials improves the shelf life of commodities by protecting them against interior and exterior factors, suitable barrier properties are impossible to attain with single polymeric packaging material. Therefore, the properties of edible films can be modified based on the hydrophobic–hydrophilic qualities of biomolecules. Certain chemical modifications of starch have been performed; however, the chemical residues may impart toxicity in the food commodity. Therefore, in such cases, several plant-derived polymeric combinations could be used as an effective binary blend of the polymer to improve the mechanical and barrier properties of packaging film. Recently, scientists have shown their great interest in underutilized plant-derived mucilage to synthesize biodegradable packaging material with desirable properties. Mucilage has a great potential to produce a stable polymeric network that confines starch granules that delay the release of amylose, improving the mechanical property of films. Therefore, the proposed review article is emphasized on the utilization of a blend of source and plant-derived mucilage for the synthesis of biodegradable packaging film. Herein, the synthesis process, characterization, mechanical properties, functional properties, and application of starch and mucilage-based film are discussed in detail.

Sign in / Sign up

Export Citation Format

Share Document