scholarly journals DEVELOPMENT OF METHODS FOR ASSESSING THE SAFETY OF LIGHT HYDROCARBON STORAGE FACILITIES IN EMERGENCY SITUATIONS

2021 ◽  
pp. 1-8
Author(s):  
Vladimir N. Permyakov ◽  
Mikhail V. Omelchuk
Keyword(s):  
Structural Changes ◽  
Three Dimensional ◽  
Practical Significance ◽  
Light Hydrocarbons ◽  
Emergency Situations ◽  
Flow Stagnation ◽  
Hydrocarbon Storage ◽  
Single Formula ◽  
Volume Method ◽  
Storage Facilities

The risk of accidents involving light hydrocarbons is caused by the physicochemical properties of the components, primarily propane and butane. The most catastrophic accidents involving these substances were on November 19, 1984, in the city of San Juan Ixhuatepec (Mexico) and on June 4, 1989, on the Asha – Ulu-Telyak section (USSR), in each of which more than 500 people died. The novelty of the study is determined by the requirement to ensure industrial and fire safety of storage facilities for light hydrocarbons by predicting probable zones of air flow stagnation. The authors calculated the formation of probable air stagnation zones for various space-planning solutions by using a three-dimensional modelling system and the finite volume method. The paper developed a methodology for assessing the safety of storage facilities for light hydrocarbons in emergency situations, which is based on the analysis of probable air stagnation zones by using three-dimensional modelling systems. The practical significance of the study is determined by the additional development of a parameter for assessing the safety state of a storage facility for light hydrocarbons (Ks) and a resulting parameter (Kr) for calculating the optimal location of structures and their structural changes. Integration of stagnation zone sizes into a single formula with the results of other safety calculations is an urgent scientific and applied problem.

Application of stereological analysis of cell volume to isolated myocytes in culture with and without adrenergic innervation

1990 ◽  
Vol 48 (3) ◽  
pp. 416-417
Author(s):  
Jane K. Rosenthal ◽  
Dianne L. Atkins ◽  
William J. Marvin ◽  
Penny A. Krumm
Keyword(s):  
Cardiac Myocytes ◽  
Structural Changes ◽  
Three Dimensional ◽  
Adrenergic Innervation ◽  
Culture Cell ◽  
Serial Sections ◽  
Newborn Rats ◽  
Primary Culture Cell ◽  
Biological Studies ◽  
Cell Volumes

To comprehend structural changes in cardiac myocytes accompanying adrenergic innervation, it is essential that a three dimensional analysis be performed. To date, biological studies which utilize stereological methods have been limited to cells in tissue and in organs. Our laboratory has utilized current stereological techniques for measuring absolute volumes of individual myocytes in primary culture. Cell volumes are calculated for two distinct groups of cells at 96 hours in culture: isolated myocytes and myocytes innervated with adrenergic neurons (Figure 1).Cardiac myocytes are cultured from the ventricular apices of newborn rats. Cells are plated directly onto tissue culture dishes with or without preplated explants from the paravertebral thoracolumbar sympathetic chain. On day four cultures are photographed and marked for one-to-one cell location. Following conventional fixation and embeddment in eponate-12, the cells are relocated and mounted for microtomy. The cells are completely sectioned at 120nm in their parallel orientation to the surface of the dish (Figure 2). Serial sections are collected on formvar coated slotted grids and are recorded in sequence.

Going Beyond 3-D Imaging: Automated 3-D Montaged image Analysis of Cytological Specimens

1996 ◽  
Vol 54 ◽  
pp. 282-283
Author(s):  
Badrinath Roysam ◽  
Hakan Ancin ◽  
Douglas E. Becker ◽  
Robert W. Mackin ◽  
Matthew M. Chestnut ◽  
...  
Keyword(s):  
Image Analysis ◽  
Structural Changes ◽  
Sampling Methods ◽  
Spatial Clustering ◽  
Three Dimensional ◽  
Field Of View ◽  
Cell Counting ◽  
Depth Of Field ◽  
Tissue Cell ◽  
Tissue Organization

This paper summarizes recent advances made by this group in the automated three-dimensional (3-D) image analysis of cytological specimens that are much thicker than the depth of field, and much wider than the field of view of the microscope. The imaging of thick samples is motivated by the need to sample large volumes of tissue rapidly, make more accurate measurements than possible with 2-D sampling, and also to perform analysis in a manner that preserves the relative locations and 3-D structures of the cells. The motivation to study specimens much wider than the field of view arises when measurements and insights at the tissue, rather than the cell level are needed.The term “analysis” indicates a activities ranging from cell counting, neuron tracing, cell morphometry, measurement of tracers, through characterization of large populations of cells with regard to higher-level tissue organization by detecting patterns such as 3-D spatial clustering, the presence of subpopulations, and their relationships to each other. Of even more interest are changes in these parameters as a function of development, and as a reaction to external stimuli. There is a widespread need to measure structural changes in tissue caused by toxins, physiologic states, biochemicals, aging, development, and electrochemical or physical stimuli. These agents could affect the number of cells per unit volume of tissue, cell volume and shape, and cause structural changes in individual cells, inter-connections, or subtle changes in higher-level tissue architecture. It is important to process large intact volumes of tissue to achieve adequate sampling and sensitivity to subtle changes. It is desirable to perform such studies rapidly, with utmost automation, and at minimal cost. Automated 3-D image analysis methods offer unique advantages and opportunities, without making simplifying assumptions of tissue uniformity, unlike random sampling methods such as stereology.12 Although stereological methods are known to be statistically unbiased, they may not be statistically efficient. Another disadvantage of sampling methods is the lack of full visual confirmation - an attractive feature of image analysis based methods.

Conformational characterization of nucleosome structure by Electron Microscopy

1993 ◽  
Vol 51 ◽  
pp. 194-195
Author(s):  
Gregory J. Czarnota
Keyword(s):  
Electron Microscopy ◽  
Structural Changes ◽  
Physiological State ◽  
Gene Activation ◽  
Three Dimensional ◽  
Macromolecular Complex ◽  
Ultrastructural Studies ◽  
Ionic Environment ◽  
Nucleosome Structure ◽  
Dimensional Reconstruction

Chromatin structure at the fundamental level of the nucleosome is important in vital cellular processes. Recent biochemical and genetic analyses show that nucleosome structure and structural changes are very active participants in gene expression, facilitating or inhibiting transcription and reflecting the physiological state of the cell. Structural states and transitions for this macromolecular complex, composed of DNA wound about a heterotypic octamer of variously modified histone proteins, have been measured by physico-chemical techniques and by enzyme-accessibility and are recognized to occur with various post-translational modifications, gene activation, transformation and with ionic-environment. In spite of studies which indicate various forms of nucleosome structure, all current x-ray and neutron diffraction studies have consistently resulted in only one structure, suggestive of a static conformation. In contrast, two-dimensional electron microscopy studies and three-dimensional reconstruction techniques have yielded different structures. These fundamental differences between EM and other ultrastructural studies have created a long standing quandary, which I have addressed and resolved using spectroscopic electron microscopy and statistical analyses of nucleosome images in a study of nucleosome structure with ionic environment.

Structural Studies of Fibrinolysis by Electron and Light Microscopy

1999 ◽  
Vol 82 (08) ◽  
pp. 277-282 ◽  
Author(s):  
Yuri Veklich ◽  
Jean-Philippe Collet ◽  
Charles Francis ◽  
John W. Weisel
Keyword(s):  
Electron Microscopy ◽  
Light Microscopy ◽  
Plasminogen Activator ◽  
Structural Changes ◽  
Molecular Mechanisms ◽  
Degradation Products ◽  
Molecular Model ◽  
Three Dimensional ◽  
Tissue Type ◽  
Type Plasminogen Activator

IntroductionMuch is known about the fibrinolytic system that converts fibrin-bound plasminogen to the active protease, plasmin, using plasminogen activators, such as tissue-type plasminogen activator (t-PA) and urokinase-type plasminogen activator. Plasmin then cleaves fibrin at specific sites and generates soluble fragments, many of which have been characterized, providing the basis for a molecular model of the polypeptide chain degradation.1-3 Soluble degradation products of fibrin have also been characterized by transmission electron microscopy, yielding a model for their structure.4 Moreover, high resolution, three-dimensional structures of certain fibrinogen fragments has provided a wealth of information that may be useful in understanding how various proteins bind to fibrin and the overall process of fibrinolysis (Doolittle, this volume).5,6 Both the rate of fibrinolysis and the structures of soluble derivatives are determined in part by the fibrin network structure itself. Furthermore, the activation of plasminogen by t-PA is accelerated by the conversion of fibrinogen to fibrin, and this reaction is also affected by the structure of the fibrin. For example, clots made of thin fibers have a decreased rate of conversion of plasminogen to plasmin by t-PA, and they generally are lysed more slowly than clots composed of thick fibers.7-9 Under other conditions, however, clots made of thin fibers may be lysed more rapidly.10 In addition, fibrin clots composed of abnormally thin fibers formed from certain dysfibrinogens display decreased plasminogen binding and a lower rate of fibrinolysis.11-13 Therefore, our increasing knowledge of various dysfibrinogenemias will aid our understanding of mechanisms of fibrinolysis (Matsuda, this volume).14,15 To account for these diverse observations and more fully understand the molecular basis of fibrinolysis, more knowledge of the physical changes in the fibrin matrix that precede solubilization is required. In this report, we summarize recent experiments utilizing transmission and scanning electron microscopy and confocal light microscopy to provide information about the structural changes occurring in polymerized fibrin during fibrinolysis. Many of the results of these experiments were unexpected and suggest some aspects of potential molecular mechanisms of fibrinolysis, which will also be described here.

Thermal characterization of ABS-Graphene blended three dimensional printed functional prototypes for electro chemical energy storage

2018 ◽  
Vol 1 (1) ◽  
pp. 1-11 ◽  
Author(s):  
Kamaljit Singh Boparai ◽  
Rupinder Singh
Keyword(s):  
Energy Storage ◽  
Structural Changes ◽  
Fused Deposition Modeling ◽  
Morphological Changes ◽  
Three Dimensional ◽  
Thermal Characterization ◽  
Chemical Energy ◽  
Flow Index ◽  
Fused Deposition

This study highlights the thermal characterization of ABS-Graphene blended three dimensional (3D) printed functional prototypes by fused deposition modeling (FDM) process. These functional prototypes have some applications as electro-chemical energy storage devices (EESD). Initially, the suitability of ABS-Graphene composite material for FDM applications has been examined by melt flow index (MFI) test. After establishing MFI, the feedstock filament for FDM has been prepared by an extrusion process. The fabricated filament has been used for printing 3D functional prototypes for printing of in-house EESD. The differential scanning calorimeter (DSC) analysis was conducted to understand the effect on glass transition temperature with the inclusion of Graphene (Gr) particles. It has been observed that the reinforced Gr particles act as a thermal reservoir (sink) and enhances its thermal/electrical conductivity. Also, FT-IR spectra realized the structural changes with the inclusion of Gr in ABS matrix. The results are supported by scanning electron microscopy (SEM) based micrographs for understanding the morphological changes.

Operational Model and its Validation with Drift Tests in Water Areas Around the Baltic Sea

1994 ◽  
Vol 29 (2-3) ◽  
pp. 293-308
Author(s):  
J. Koponen ◽  
M. Virtanen ◽  
H. Vepsä ◽  
E. Alasaarela
Keyword(s):  
Three Dimensional ◽  
Fast Response ◽  
Velocity Measurements ◽  
Short Term ◽  
Large Lakes ◽  
Operational Model ◽  
Water Currents ◽  
Emergency Situations ◽  
Sensitivity Tests ◽  
The Baltic

Abstract Three-dimensional (3-D) mathematical models of water currents, transport, mixing, reaction kinetic, and interactions with bottom and air have been used in Finland regularly since 1982 and applied to about 40 cases in large lakes, inland seas and their coastal waters. In each case, model validity has been carefully tested with available flow velocity measurements, tracer studies and water quality observations. For operational use, i.e., for spill combatting and sea rescue, the models need fast response, proven validity and illustrative visualization. In 1987-90, validated models were implemented for operational use at five sea areas along the Finnish coast. Further validation was obtained in model applications from nine documented or arranged cases and from seven emergency situations. Sensitivity tests supplement short-term validation. In the Bothnian Sea, it was nescessary to start the calculation of water currents three days prior to the start of the experiment to reduce initial inaccuracies and to make the coastal transport estimates meaningful.

scholarly journals Dynamics of Single Droplet Splashing on Liquid Film by Coupling FVM with VOF

Processes ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 841
Author(s):  
Yuzhen Jin ◽  
Huang Zhou ◽  
Linhang Zhu ◽  
Zeqing Li
Keyword(s):  
Liquid Film ◽  
Weber Number ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Single Droplet ◽  
Navier Stokes Equations ◽  
Volume Method ◽  
The Relationship

A three-dimensional numerical study of a single droplet splashing vertically on a liquid film is presented. The numerical method is based on the finite volume method (FVM) of Navier–Stokes equations coupled with the volume of fluid (VOF) method, and the adaptive local mesh refinement technology is adopted. It enables the liquid–gas interface to be tracked more accurately, and to be less computationally expensive. The relationship between the diameter of the free rim, the height of the crown with different numbers of collision Weber, and the thickness of the liquid film is explored. The results indicate that the crown height increases as the Weber number increases, and the diameter of the crown rim is inversely proportional to the collision Weber number. It can also be concluded that the dimensionless height of the crown decreases with the increase in the thickness of the dimensionless liquid film, which has little effect on the diameter of the crown rim during its growth.

scholarly journals Exploration of collagen cavitation based on peptide electrolysis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Rui Zhai ◽  
Hui Chen ◽  
Zhihua Shan
Keyword(s):  
Structural Changes ◽  
Preparation Method ◽  
Supporting Electrolyte ◽  
Three Dimensional ◽  
Anode Region ◽  
New Approach ◽  
New Material ◽  
Animal Skin ◽  
Exchange Membrane ◽  
Material Preparation

AbstractElectrochemical modification of animal skin is a new material preparation method and new direction of research exploration. In this study, under the action of the electric field using NaCl as the supporting electrolyte, the effect of electrolysis on Glycyl-glycine(GlyGl), gelatin(Gel) and Three-dimensional rawhide collagen(3DC) were determined. The amino group of GlyGl is quickly eliminated within the anode region by electrolysis isolated by an anion exchange membrane. Using the same method, it was found that the molecular weight of Gel and the isoelectric point of the Gel decreased, and the viscosity and transparency of the Gel solution obviously changed. The electrolytic dissolution and structural changes of 3DC were further investigated. The results of TOC and TN showed that the organic matter in 3DC was dissolved by electrolysis, and the tissue cavitation was obvious. A new approach for the preparation of collagen-based multi-pore biomaterials by electrochemical method was explored.

scholarly journals Partial aperture imaging system based on sparse point spread holograms and nonlinear cross-correlations

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Angika Bulbul ◽  
Joseph Rosen
Keyword(s):  
Structural Changes ◽  
Imaging System ◽  
Current System ◽  
Three Dimensional ◽  
Phase Mask ◽  
Coded Aperture ◽  
Space Telescopes ◽  
Reconstruction Process ◽  
Cross Correlations ◽  
Equivalent Systems

AbstractPartial aperture imaging system (PAIS) is a recently developed concept in which the traditional disc-shaped aperture is replaced by an aperture with a much smaller area and yet its imaging capabilities are comparable to the full aperture systems. Recently PAIS was demonstrated as an indirect incoherent digital three-dimensional imaging technique. Later it was successfully implemented in the study of the synthetic marginal aperture with revolving telescopes (SMART) to provide superresolution with subaperture area that was less than one percent of the area of the full synthetic disc-shaped aperture. In the study of SMART, the concept of PAIS was tested by placing eight coded phase reflectors along the boundary of the full synthetic aperture. In the current study, various improvements of PAIS are tested and its performance is compared with the other equivalent systems. Among the structural changes, we test ring-shaped eight coded phase subapertures with the same area as of the previous circular subapertures, distributed along the boundary of the full disc-shaped aperture. Another change in the current system is the use of coded phase mask with a point response of a sparse dot pattern. The third change is in the reconstruction process in which a nonlinear correlation with optimal parameters is implemented. With the improved image quality, the modified-PAIS can save weight and cost of imaging devices in general and of space telescopes in particular. Experimental results with reflective objects show that the concept of coded aperture extends the limits of classical imaging.

Sign in / Sign up

Export Citation Format

Share Document