Evaluation of the Service Performance of Ships

2005 ◽  
Vol 42 (04) ◽  
pp. 177-183
Author(s):  
Poul Andersen ◽  
Anne-Sophie Borrod ◽  
Hervé Blanchot
Keyword(s):  
Input Data ◽  
High Efficiency ◽  
Service Performance ◽  
The Other ◽  
Simple Method ◽  
Propulsive Efficiency ◽  
Order Of Magnitude ◽  
Time Periods

A simple method has been established for the evaluation of the service performance of ships. Input data are easily collected daily on board and transformed to a well-defined condition that makes possible the comparison between ships, for instance, sister ships, and between different time periods of voyages for the same ship. The procedure has been applied to two ships that are identical, with the only exception that one has a conventional propeller, whereas the other one is fitted with a high-efficiency propeller of the KAPPEL type. The results are obtained from a period of 2 years steaming for both vessels. They clearly confirm the increase of propulsive efficiency obtained with the KAPPEL propeller in the order of magnitude of 4%.

The Tradition of Religious Books (Kitabs) Printing: Case Study of the Production and Reproduction of Religious Books (Kitabs) in Cianjur and Sukabumi, West Java, Indonesia

2020 ◽  
Vol 17 (2) ◽  
pp. 291-320
Author(s):  
Asep Saefullah
Keyword(s):  
Data Collection ◽  
Screen Printing ◽  
The Other ◽  
West Java ◽  
Simple Method ◽  
Original Essays ◽  
Printed Books ◽  
Religious Books ◽  
Living Tradition

Tulisan ini membahas fenomena penyebaran kitab-kitab cetak keaga­maan di Jawa Barat, khususnya di Sukabumi dan Cianjur. Jenis kitab ini biasanya menggunakan tulisan Arab dengan bahasa Sunda dan menggu­nakan aksara Pegon. Kitab-kitab cetak dari jenis-jenis itu diproduksi dan direproduksi, dan masih digunakan sampai hari ini. Oleh karena itu, fenomena ini dapat disebut sebagai “living tradition”. Pengumpulan data dilakukan dengan melacak dan merekam kitab-kitab yang diproduksi (disalin atau dikarang) dan direproduksi (dicetak atau digandakan) dengan metode seder­hana, yakni fotocopi dan pencetakan tradisional seperti stensil, sablon, dan "cetak toko". Tulisan ini bertujuan untuk memetakan dan merevisi kategorisasi kitab-kitab tersebut dari kajian terdahulu berdasarkan jenis karya, seperti karangan asli, tuqilan, terjemahan, syarḥ (penjelasan), khulasah (ringkasan) yang lain, dan juga berdasarkan bahasa dan aksara yang digunakan. Selain itu, tulisan ini juga mengamati lembaga-lembaga atau individu-individu yang masih mereproduksi buku-buku (kitab-kitab) keagamaan sederhana seperti perusahaan percetakan atau pesantren yang menerbitkan kitab-kitab tersebut. Pada akhir artikel ini, ada beberapa saran dalam upaya untuk melestarikan kitab-kitab cetak dan karya-karya tersebut.Kata kunci: kitab, jenis karya, pencetakan tradisional, Sunda, Pegon, Jawa Barat This paper discusses the phenomenon of the spreading of religious printed books (kitabs) in West Java, especially in Sukabumi and Cianjur, which are characterized by the use of Arabic writing in Sundanese (or known as Pegon script). The printed books (Kitabs) of those types are produced and reproduced, and are still used to this day. Therefore, this phenomenon can be called as a “living tradition”. Data collection was conducted by tracing and recording religious books (kitabs) that are pro-duced (rewritten or compossed) and reproduced (printed or duplicated) with a simple method, known as photocopying and traditional printing such as stencils, screen printing, and “shop printing”. This paper aims to map and revise the categorization of these Kitabs from previous studies based on the types of works including original essays, tuqilan (quotations), translation, sharh (explanation), khulaṣah (summary), or the other, and also based on the language and the script used. In addition, this paper also observes the institutions or individuals that are still reproducing these printed religious books such as the printing company or pesantren that publish such kitabs. At the end of this article, there are some suggestions in attempts to preserve those printed kitabs and the works.Keywords: Kitabs, type of work, traditional printing, Sunda, Pegon, West Java

Comparison of the Potency of 8-L-Arginine, 8-D-Arginine and 8-D-Homoarginine Vasopressin Analogs with Substituted Phenylalanine in Position 2

1994 ◽  
Vol 59 (6) ◽  
pp. 1439-1450 ◽  
Author(s):  
Miroslava Žertová ◽  
Jiřina Slaninová ◽  
Zdenko Procházka
Keyword(s):  
Amino Acid ◽  
Solid Phase Synthesis ◽  
Solid Phase ◽  
Basic Amino Acid ◽  
The Other ◽  
Side Chain ◽  
Inhibitory Potency ◽  
Phase Synthesis ◽  
Other Hand ◽  
Order Of Magnitude

An analysis of the uterotonic potencies of all analogs having substituted L- or D-tyrosine or -phenylalanine in position 2 and L-arginine, D-arginine or D-homoarginine in position 8 was made. The series of analogs already published was completed by the solid phase synthesis of ten new analogs having L- or D-Phe, L- or D-Phe(2-Et), L- or D-Phe(2,4,6-triMe) or D-Tyr(Me) in position 2 and either L- or D-arginine in position 8. All newly synthesized analogs were found to be uterotonic inhibitors. Deamination increases both the agonistic and antagonistic potency. In the case of phenylalanine analogs the change of configuration from L to D in position 2 enhances the uterotonic inhibition for more than 1 order of magnitude. The L to D change in position 8 enhances the inhibitory potency negligibly. Prolongation of the side chain of the D-basic amino acid in position 8 seems to decrease slightly the inhibitory potency if there is L-substituted amino acid in position 2. On the other hand there is a tendency to the increase of the inhibitory potency if there is D-substituted amino acid in position 2.

scholarly journals On-Shelf Utility Mining of Sequence Data

2021 ◽  
Vol 16 (2) ◽  
pp. 1-31
Author(s):  
Chunkai Zhang ◽  
Zilin Du ◽  
Yuting Yang ◽  
Wensheng Gan ◽  
Philip S. Yu
Keyword(s):  
High Efficiency ◽  
Sequence Data ◽  
Real Life ◽  
Search Space ◽  
Upper Bounds ◽  
Utility Mining ◽  
Limited Memory ◽  
Time Periods ◽  
High Utility ◽  
Synthetic Datasets

Utility mining has emerged as an important and interesting topic owing to its wide application and considerable popularity. However, conventional utility mining methods have a bias toward items that have longer on-shelf time as they have a greater chance to generate a high utility. To eliminate the bias, the problem of on-shelf utility mining (OSUM) is introduced. In this article, we focus on the task of OSUM of sequence data, where the sequential database is divided into several partitions according to time periods and items are associated with utilities and several on-shelf time periods. To address the problem, we propose two methods, OSUM of sequence data (OSUMS) and OSUMS + , to extract on-shelf high-utility sequential patterns. For further efficiency, we also design several strategies to reduce the search space and avoid redundant calculation with two upper bounds time prefix extension utility ( TPEU ) and time reduced sequence utility ( TRSU ). In addition, two novel data structures are developed for facilitating the calculation of upper bounds and utilities. Substantial experimental results on certain real and synthetic datasets show that the two methods outperform the state-of-the-art algorithm. In conclusion, OSUMS may consume a large amount of memory and is unsuitable for cases with limited memory, while OSUMS + has wider real-life applications owing to its high efficiency.

scholarly journals Fast Accurate and Automatic Brushstroke Extraction

2021 ◽  
Vol 17 (2) ◽  
pp. 1-24
Author(s):  
Yunfei Fu ◽  
Hongchuan Yu ◽  
Chih-Kuo Yeh ◽  
Tong-Yee Lee ◽  
Jian J. Zhang
Keyword(s):  
Neural Network ◽  
Efficient Algorithm ◽  
Deep Neural Network ◽  
High Efficiency ◽  
State Of The Art ◽  
High Reliability ◽  
The Other ◽  
Manual Annotation ◽  
Stroke Extraction ◽  
Art Research

Brushstrokes are viewed as the artist’s “handwriting” in a painting. In many applications such as style learning and transfer, mimicking painting, and painting authentication, it is highly desired to quantitatively and accurately identify brushstroke characteristics from old masters’ pieces using computer programs. However, due to the nature of hundreds or thousands of intermingling brushstrokes in the painting, it still remains challenging. This article proposes an efficient algorithm for brush Stroke extraction based on a Deep neural network, i.e., DStroke. Compared to the state-of-the-art research, the main merit of the proposed DStroke is to automatically and rapidly extract brushstrokes from a painting without manual annotation, while accurately approximating the real brushstrokes with high reliability. Herein, recovering the faithful soft transitions between brushstrokes is often ignored by the other methods. In fact, the details of brushstrokes in a master piece of painting (e.g., shapes, colors, texture, overlaps) are highly desired by artists since they hold promise to enhance and extend the artists’ powers, just like microscopes extend biologists’ powers. To demonstrate the high efficiency of the proposed DStroke, we perform it on a set of real scans of paintings and a set of synthetic paintings, respectively. Experiments show that the proposed DStroke is noticeably faster and more accurate at identifying and extracting brushstrokes, outperforming the other methods.

scholarly journals Effects of flexibility on the aerodynamic performance of flapping wings

2011 ◽  
Vol 689 ◽  
pp. 32-74 ◽  
Author(s):  
C.-K. Kang ◽  
H. Aono ◽  
C. E. S. Cesnik ◽  
W. Shyy
Keyword(s):  
Reynolds Number ◽  
Density Ratio ◽  
Flapping Wings ◽  
Mass Force ◽  
Propulsive Force ◽  
Propulsive Efficiency ◽  
Reduced Frequency ◽  
Moving Body ◽  
Order Of Magnitude ◽  
Direct Guidance

AbstractEffects of chordwise, spanwise, and isotropic flexibility on the force generation and propulsive efficiency of flapping wings are elucidated. For a moving body immersed in viscous fluid, different types of forces, as a function of the Reynolds number, reduced frequency (k), and Strouhal number (St), acting on the moving body are identified based on a scaling argument. In particular, at the Reynolds number regime of $O(1{0}^{3} \ensuremath{-} 1{0}^{4} )$ and the reduced frequency of $O(1)$, the added mass force, related to the acceleration of the wing, is important. Based on the order of magnitude and energy balance arguments, a relationship between the propulsive force and the maximum relative wing-tip deformation parameter ($\gamma $) is established. The parameter depends on the density ratio, St, k, natural and flapping frequency ratio, and flapping amplitude. The lift generation, and the propulsive efficiency can be deduced by the same scaling procedures. It seems that the maximum propulsive force is obtained when flapping near the resonance, whereas the optimal propulsive efficiency is reached when flapping at about half of the natural frequency; both are supported by the reported studies. The established scaling relationships can offer direct guidance for micro air vehicle design and performance analysis.

Toxic properties of Aeromonas proteolytica

1974 ◽  
Vol 20 (10) ◽  
pp. 1403-1409 ◽  
Author(s):  
B. G. Foster ◽  
Mary O. Hanna
Keyword(s):  
Thermal Stability ◽  
Culture Filtrate ◽  
Hemolytic Activity ◽  
Optimal Growth ◽  
Growth Conditions ◽  
The Other ◽  
Activity Peak ◽  
Endopeptidase Activity ◽  
Time Periods ◽  
Thermal Stability Of

Aeromonas proteolytica was grown for various time periods in nutrient broth, tryptic soy broth, a semisynthetic medium, and 1 and 5% peptone under different conditions involving temperature and in continuous shake and stationary flasks. The cell-free culture filtrates were tested for hemolytic, endopeptidase, and dermonecrotic activity and optimal growth conditions for their production were determined. The dermonecrotic activity and endopeptidase activity was found to be parallel in all tests, while hemolysin was independent of the other two. Studies on the thermal stability of the culture filtrate revealed that hemolysin and dermonecrotic and endopeptidase activity were destroyed at 70 °C for 30 min. Fractionation of the filtrate by Sephadex G-200 resolved three peaks at 280 nm. Peak I was inactive; peak II contained endopeptidase and dermonecrotic and hemolytic activity; peak III contained pigment and hemolysin. Evidence is presented that the endopeptidase and dermonecrotic substance found in the cell-free filtrates of A. proteolytica grown medium appear at the same time and thus may be the same entity.

scholarly journals Oscillating foils of high propulsive efficiency

1998 ◽  
Vol 360 ◽  
pp. 41-72 ◽  
Author(s):  
J. M. ANDERSON ◽  
K. STREITLIEN ◽  
D. S. BARRETT ◽  
M. S. TRIANTAFYLLOU
Keyword(s):  
Reynolds Number ◽  
High Efficiency ◽  
Leading Edge ◽  
Half Cycle ◽  
Trailing Edge ◽  
Propulsive Efficiency ◽  
Principal Characteristics ◽  
Theoretical Predictions ◽  
Power Measurements ◽  
Oscillating Foils

Thrust-producing harmonically oscillating foils are studied through force and power measurements, as well as visualization data, to classify the principal characteristics of the flow around and in the wake of the foil. Visualization data are obtained using digital particle image velocimetry at Reynolds number 1100, and force and power data are measured at Reynolds number 40 000. The experimental results are compared with theoretical predictions of linear and nonlinear inviscid theory and it is found that agreement between theory and experiment is good over a certain parametric range, when the wake consists of an array of alternating vortices and either very weak or no leading-edge vortices form. High propulsive efficiency, as high as 87%, is measured experimentally under conditions of optimal wake formation. Visualization results elucidate the basic mechanisms involved and show that conditions of high efficiency are associated with the formation on alternating sides of the foil of a moderately strong leading-edge vortex per half-cycle, which is convected downstream and interacts with trailing-edge vorticity, resulting eventually in the formation of a reverse Kármán street. The phase angle between transverse oscillation and angular motion is the critical parameter affecting the interaction of leading-edge and trailing-edge vorticity, as well as the efficiency of propulsion.

scholarly journals The use of ceiling temperature and reactivation in the isolation of pox virus hybrids

1964 ◽  
Vol 62 (2) ◽  
pp. 133-140 ◽  
Author(s):  
K. R. Dumbell ◽  
H. S. Bedson
Keyword(s):  
Active State ◽  
The Other ◽  
Detailed Account ◽  
Parental Virus ◽  
Simple Method ◽  
Ceiling Temperature ◽  
Temperature Heat

A simple method for the isolation of pox virus hybrids on the C.A.M. has been described. One parental virus was used as a heat-inactivated suspension. The other parent was used in the active state, but at a temperature higher than its ceiling temperature. Under these conditions the inactive parent was reactivated so that pocks resulted only from the cells infected with both parental viruses. Many of these pocks were unlike those of either parent. Such lesions were found to contain a high proportion of hybrids. In these experiments, alastrim was crossed with rabbit pox and variola major with cowpox.The term ‘heat-tethered’ has been used to describe virus whose intracellular cycle of development has been arrested by incubation at too high a temperature. Heat-tethered virus has interesting properties and two of these have been described. When the temperature is lowered, heat-tethered virus will start to grow again. Its reactivating potential has been mentioned above. A more detailed account of the properties of heat-tethered virus is being prepared.

scholarly journals Heterogeneous Catalytic Synthesis of 2-Methylbenzimidazole from 2-Nitroaniline and Ethanol Over Mg Modified Cu-Pd/γ-Al2O3

Catalysts ◽  
2018 ◽  
Vol 9 (1) ◽  
pp. 8 ◽  
Author(s):  
Feng Feng ◽  
Yaqin Deng ◽  
Zheng Cheng ◽  
Xiaoliang Xu ◽  
Qunfeng Zhang ◽  
...  
Keyword(s):  
Active Sites ◽  
Hydrogen Transfer ◽  
High Efficiency ◽  
Simple Procedure ◽  
Direct Synthesis ◽  
Reaction System ◽  
Simple Method ◽  
Heterogeneous Catalytic ◽  
Coupled Reaction ◽  
Al2o3 Catalyst

The direct synthesis of benzimidazoles from 2-nitroaniline and ethanol over Cu-Pd/γ-Al2O3 catalysts has the advantages of requiring easily available starting materials, having high efficiency, and a simple procedure. The modification by Mg of the Cu-Pd/γ-Al2O3 catalyst could improve the catalytic activity significantly. The addition of Mg to the Cu-Pd/γ-Al2O3 catalyst could maintain and promote the formation of CuPd alloy active sites. Meanwhile, the basicity of the support was enhanced appropriately by Mg, which generated more basic sites (Al-Oδ−) to accelerate the dehydrogenation of alcohol and increased the rate of the whole coupled reaction. The 2-nitroaniline was completely converted over Cu-Pd/(Mg)γ-Al2O3 after reacting for six hours, and the yield of 2-methylbenzimidazole was 98.8%. The results of this work provide a simple method to develop a more efficient catalyst for the “alcohol-dehydrogenation, hydrogen transfer and hydrogenation” coupled reaction system.

scholarly journals State policy on the functioning of institute of bankruptcy in Ukraine

2019 ◽  
Vol 2 (4) ◽  
pp. 86-104
Author(s):  
Yuliya Orlovska ◽  
Nika Ilkova
Keyword(s):  
State Policy ◽  
Economic Freedom ◽  
Input Data ◽  
State Regulation ◽  
The Other ◽  
Main Task ◽  
Doing Business ◽  
National Economic ◽  
The Impact ◽  
Positive Effect

It is precisely in the course of adjusting the activities of these subjects, the main task of state regulation of the bankruptcy institute is the formation of such conditions for the functioning of the national economy, which will reduce the risk of doing business for all its entities and promote the internal reorganization of its structure in accordance with the requirements of global transformations. The system of indicators describing the situation in a certain area of ​​the functioning of national economic entities allows us to determine, directly or indirectly, the effectiveness of the bankruptcy institute at the macro-level. To analyze the impact of each of the factors on GDP, a sensitivity analysis was conducted according to which input data X were recorded at the values ​​of 2018 and alternately changed by 10%. For each such change, GDP was calculated as compared to the model value for 2018. As a result of the calculations, the most sensitive factors were identified and features of the functioning of the bankruptcy institute in the Ukrainian economy were identified. The main provisions of a state policy aimed at increasing the functional effectiveness of the bankruptcy institute are formulated. First of all, it is necessary to promote the country's position in the Doing business rankings, as well as the Indexes of Economic Freedom and Corruption Perceptions. On the other hand, an annual growth of the inflation index of around 10% and the level of the fiscal tax burden will also have a positive effect on GDP dynamics.

Sign in / Sign up

Export Citation Format

Share Document