scholarly journals Repurposing a traditional Japanese method of pest control for wintering pine moths, Komo-trap, for use against summer and winter populations of fall webworms

PeerJ ◽  
2020 ◽  
Vol 8 ◽  
pp. e9244
Author(s):  
Osamu K. Mikami ◽  
Misaki Takamatsu ◽  
Rika Yarita
Keyword(s):  
Street Trees ◽  
Hyphantria Cunea ◽  
Cost Performance ◽  
Northern Mexico ◽  
Pest Damage ◽  
Nontarget Effects ◽  
Wide Range ◽  
Fall Webworm ◽  
The Cost ◽  
Tree Pruning

Background The fall webworm, Hyphantria cunea Drury (Lepidoptera: Erebidae), is a widespread invasive species. It is native to North America, ranging from southern Canada to northern Mexico. During and after the 1940s, this pest was accidentally introduced in many parts of Europe and Asia. It has now spread to more than 30 countries. The larvae feed on leaves of a wide range of tree species, including ones used as street trees in cities, causing an increase in urban management cost. Although several pest management methods have been employed, pest damage continues especially in newly invaded areas. In this study, we examined the effect and cost-effectiveness of the komo-trap, traditionally used in Japan to reduce the population of larvae of the pine moth Dendrolimus spectabilis Butler (Lepidoptera: Lasiocampidae). This trap, which is safe for people and ecosystems, has not yet been applied to trap the fall webworm. Methods In two seasons of 2017, we set komo-traps on street trees in Hakodate City, Japan. We counted the numbers of captured fall webworms compared with controls. We also monitored other species to evaluate any nontarget effects of the trap. Results One komo, the material cost of which is about 1.10 USD, captured 43.8 fall webworms on average in summer and 27.2 in the fall. The values were significantly larger than those of the controls, which were 0.07 in summer and 0.14 in winter. Bycatch of other species was minimal in summer, whereas in the fall one komo, on average, caught 10.7 woodlice Porcellio sp. or spp. (Isopoda: Porcellionidae). Discussion The komo-trap is effective in capturing fall webworm. The cost performance of the trap is very favorable, and the nontarget effects can be reduced by using the trap in summer only. The komo-trap would complement other control methods such as tree pruning. Because its cost is low, we recommend that the komo-trap be introduced as a larger-scale trial.

Hyphantria cunea. [Distribution map].

1961 ◽  
Author(s):  
Keyword(s):  
North America ◽  
Deciduous Forest ◽  
Distribution Map ◽  
Hyphantria Cunea ◽  
Wide Range ◽  
Fall Webworm ◽  
Ornamental Trees ◽  
Trees And Shrubs ◽  
New Distribution ◽  
Distribution In Europe

Abstract A new distribution map is provided for Hyphantria cunea (Dru.) (Lep., Arctiidae) (Fall Webworm). Hosts: Wide range of deciduous forest, orchard and ornamental trees and shrubs. Information is given on the geographical distribution in EUROPE (excl. USSR), Austria, Czechoslovakia, Hungary, Rumania, Yugoslavia, ASIA (excl.USSR), Japan, USSR, NORTH AMERICA, Canada, Mexico, U.S.A.

The Biology of Perilampus hyalinus Say (Hymenoptera: Perilampidae), a Primary Parasite of Neodiprion swainei Midd. (Hymenoptera: Diprionidae) in Quebec, with Descriptions of the Egg and Larval Stages

1962 ◽  
Vol 94 (12) ◽  
pp. 1250-1270 ◽  
Author(s):  
Howard A. Tripp
Keyword(s):  
Biological Control ◽  
Immature Stages ◽  
Hyphantria Cunea ◽  
Larval Stages ◽  
First Instar ◽  
Wide Range ◽  
Primary Parasite ◽  
Fall Webworm

For many years, the specific name, hyalinus, has been used to designate certain Perilampus adults reared from a variety of insects belonging to the orders Lepidoptera, Orthoptera, Hymenoptera, and Diptera. Normally, taxonomists hesitate to classify parasites from such a wide range of hosts under one specific name; but in this case their fears were allayed by the concept that most Perilampus species were strictly hyperparasitic and hence probably preyed upon a narrower range of hosts than indicated by rearing records. The hyperparasitic nature of Perilampus hyalinus Say was established in 1912 by Smith who recovered its immature stages from various primary parasites of the fall webworm, Hyphantria cunea Drury. Smith gave an account of the behaviour of the first-instar planidial stage and came to the conclusion that the species could not develop as a primary parasite of the fall webwom. A hyperparasitic behaviour was demonstrated also for P. tristis Mayr on various primary parasites of the European pine shoot moth, Rhyacionia buoliana (Schiff.) (Bergold and Ripper, 1937). Primary parasitism was shown for P. chrysopa spp. (Clancy, 1946), and for P. italicus F. on the tenthredinid, Athalia colibri Christ. (Martelli, 1932). Nevertheless, the concept of hyperparasitism became generally accepted for most of the genus and discouraged attempts to utilize members of this genus for purposes of biological control of injurious defoliating insects.

scholarly journals HIGH PERFORMANCE FLEXIBLE NANOPARTICLES BASED ORGANIC ELECTRONICS

2019 ◽  
Vol 2019 (02) ◽  
pp. 99-106
Author(s):  
Nirmal D.
Keyword(s):  
Solar Cells ◽  
Organic Semiconductors ◽  
High Performance ◽  
Cost Performance ◽  
Performance Improvements ◽  
Wide Range ◽  
Efficiency Performance ◽  
Low Efficiency ◽  
The Cost ◽  
Nanoparticle Additives

The attributes of the organic materials have made them more prominent in a wide range of applications engaged for large or small purpose such as the solar cells or the displays in the mobile devices. The solar cells developed using the organic semiconductors are more advantageous due to their flexibility and their easy installation. Despite the versatile nature of the and easy implementation the organic semiconductors still suffers from low efficiency in term of cost, performance and size. The proposed method incorporates the nanomaterials in the organic solar cell to improvise efficiency (performance) and to minimize the cost as well as the size of the solar cells. The proposed method replaces the semiconductor that is organic by incorporating the organic semiconductors with the nanoparticle additives to have a perfect blending in solution to improve the crystallizations of the semiconductor, and the uniformity thus improvising the power conversion efficiency in the solar cells and minimizing the size and the cost . The result acquired through evaluation proves the performance improvements to 19% form 3.5% in the solar cells.

IMPROVEMENT OF INNOVATIVE ACTIVITY OF THE ENTERPRISE

2017 ◽  
Author(s):  
Nataliya Stoyanets ◽  
◽  
Mathias Onuh Aboyi ◽  
Keyword(s):  
Value Chain ◽  
Net Present Value ◽  
Successful Implementation ◽  
Innovative Development ◽  
Technological Equipment ◽  
Alliance Partner ◽  
Innovation Potential ◽  
Wide Range ◽  
Technological Platform ◽  
The Cost

The article defines that for the successful implementation of an innovative project and the introduction of a new product into production it is necessary to use advanced technologies and modern software, which is an integral part of successful innovation by taking into account the life cycle of innovations. It is proposed to consider the general potential of the enterprise through its main components, namely: production and technological, scientific and technical, financial and economic, personnel and actual innovation potential. Base for the introduction of technological innovations LLC "ALLIANCE- PARTNER", which provides a wide range of support and consulting services, services in the employment market, tourism, insurance, translation and more. To form a model of innovative development of the enterprise, it is advisable to establish the following key aspects: the system of value creation through the model of cooperation with partners and suppliers; creating a value chain; technological platform; infrastructure, determine the cost of supply, the cost of activities for customers and for the enterprise as a whole. The system of factors of influence on formation of model of strategic innovative development of the enterprise is offered. The expediency of the cost of the complex of technological equipment, which is 6800.0 thousand UAH, is economically calculated. Given the fact that the company plans to receive funds under the program of socio-economic development of Sumy region, the evaluation of the effectiveness of the innovation project, the purchase of technological equipment, it is determined that the payback period of the project is 3 years 10 months. In terms of net present value (NPV), the project under study is profitable. The project profitability index (PI) meets the requirements for a positive decision on project implementation> 1.0. The internal rate of return of the project (IRR) also has a positive value of 22% because it exceeds the discount rate.

The meta-technology cost ratio: An indicator for judging the cost performance of CO2 reduction

2013 ◽  
Vol 35 ◽  
pp. 1-9 ◽  
Author(s):  
Pei-Ing Wu ◽  
Chai Tzu Chen ◽  
Je-Liang Liou
Keyword(s):  
Co2 Reduction ◽  
Cost Ratio ◽  
Cost Performance ◽  
The Cost

scholarly journals Ring-Forming Polymerization toward Perfluorocyclobutyl and Ortho-Diynylarene-Derived Materials: From Synthesis to Practical Applications

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1486
Author(s):  
Eugene B. Caldona ◽  
Ernesto I. Borrego ◽  
Ketki E. Shelar ◽  
Karl M. Mukeba ◽  
Dennis W. Smith
Keyword(s):  
Chemical Resistance ◽  
Structural Features ◽  
Review Article ◽  
Aryl Ether ◽  
Aromatic Rings ◽  
Practical Applications ◽  
Repeat Units ◽  
Wide Range ◽  
Synthetic Routes ◽  
The Cost

Many desirable characteristics of polymers arise from the method of polymerization and structural features of their repeat units, which typically are responsible for the polymer’s performance at the cost of processability. While linear alternatives are popular, polymers composed of cyclic repeat units across their backbones have generally been shown to exhibit higher optical transparency, lower water absorption, and higher glass transition temperatures. These specifically include polymers built with either substituted alicyclic structures or aromatic rings, or both. In this review article, we highlight two useful ring-forming polymer groups, perfluorocyclobutyl (PFCB) aryl ether polymers and ortho-diynylarene- (ODA) based thermosets, both demonstrating outstanding thermal stability, chemical resistance, mechanical integrity, and improved processability. Different synthetic routes (with emphasis on ring-forming polymerization) and properties for these polymers are discussed, followed by their relevant applications in a wide range of aspects.

scholarly journals Production of Microfibrillated Cellulose from Fast-Growing Poplar and Olive Tree Pruning by Physical Pretreatment

2021 ◽  
Vol 11 (14) ◽  
pp. 6445
Author(s):  
David Ibarra ◽  
Raquel Martín-Sampedro ◽  
Bernd Wicklein ◽  
Úrsula Fillat ◽  
María E. Eugenio
Keyword(s):  
Negative Impact ◽  
Raw Materials ◽  
Olive Tree ◽  
Barrier Properties ◽  
Microfibrillated Cellulose ◽  
Mechanical Resistance ◽  
Fast Growing ◽  
Wide Range ◽  
Pfi Refining ◽  
Tree Pruning

Motivated by the negative impact of fossil fuel consumption on the environment, the need arises to produce materials and energy from renewable sources. Cellulose, the main biopolymer on Earth, plays a key role in this context, serving as a platform for the development of biofuels, chemicals and novel materials. Among the latter, micro- and nanocellulose have been receiving increasing attention in the last few years. Their many attractive properties, i.e., thermal stability, high mechanical resistance, barrier properties, lightweight, optical transparency and ease of chemical modification, allow their use in a wide range of applications, such as paper or polymer reinforcement, packaging, construction, membranes, bioplastics, bioengineering, optics and electronics. In view of the increasing demand for traditional wood pulp (e.g., obtained from eucalypt, birch, pine, spruce) for micro/nanocellulose production, dedicated crops and agricultural residues can be interesting as raw materials for this purpose. This work aims at achieving microfibrillated cellulose production from fast-growing poplar and olive tree pruning using physical pretreatment (PFI refining) before the microfibrillation stage. Both raw materials yielded microfibrillated cellulose with similar properties to that obtained from a commercial industrial eucalypt pulp, producing films with high mechanical properties and low wettability. According to these properties, different applications for cellulose microfibers suspensions and films are discussed.

Plasticity of nutrient accumulation patterns in diapausing fall webworm pupae

2021 ◽  
pp. 1-8
Author(s):  
Lvquan Zhao ◽  
Wei Wang ◽  
Ying Qiu ◽  
Alex S. Torson
Keyword(s):  
The Body ◽  
Diapause Induction ◽  
Energy Reserve ◽  
Short Photoperiod ◽  
Induction Phase ◽  
Energy Reserves ◽  
Hyphantria Cunea ◽  
Survival And Reproduction ◽  
Fall Webworm ◽  
Diapause Incidence

Abstract The accumulation of nutrients during diapause preparation is crucial because any lack of nutrition will reduce the likelihood of insects completing diapause, thereby decreasing their chances of survival and reproduction. The fall webworm, Hyphantria cunea, diapause as overwintering pupae and their diapause incidence and diapause intensity are regulated by the photoperiod. In this study, we test the hypothesis that photoperiod influences energy reserve accumulation during diapause preparation in fall webworm. We found that the body size and mass, lipid and carbohydrate content of pupae with a short photoperiod during the diapause induction phase were significantly greater than those of pupae with a relatively short photoperiod, and the efficiency of converting digested food and ingested food into body matter was greater in the short-photoperiod diapause-destined larvae than the relatively short-photoperiod diapause-destined larvae. We also observed higher lipase and amylase activities in short-photoperiod diapause-destined larvae relative to the counterparts. However, no obvious difference was found in protein and protease in the pupae with a short photoperiod during the diapause induction phase and short-photoperiod diapause-destined larvae compared with the counterparts. Therefore, we conclude that the energy reserve patterns of diapausing fall webworm pupae are plastic and that short-photoperiod diapause-destined larvae increase their energy reserves by improving their feeding efficiency and increase their lipid and carbohydrate stores by increasing the lipase and amylase activities in the midgut.

scholarly journals Roughing Milling with Ceramic Tools in Comparison with Sintered Carbide on Nickel-Based Alloys

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 734
Author(s):  
Pablo Fernández-Lucio ◽  
Octavio Pereira Neto ◽  
Gaizka Gómez-Escudero ◽  
Francisco Javier Amigo Fuertes ◽  
Asier Fernández Valdivielso ◽  
...  
Keyword(s):  
Cutting Speed ◽  
High Volume ◽  
Cemented Carbide ◽  
Performance Ratio ◽  
Cost Performance ◽  
Ceramic Tools ◽  
The Cost ◽  
Engine Components ◽  
Coated Carbide ◽  
Milling Tools

Productivity in the manufacture of aircrafts components, especially engine components, must increase along with more sustainable conditions. Regarding machining, a solution is proposed to increase the cutting speed, but engines are made with very difficult-to-cut alloys. In this work, a comparison between two cutting tool materials, namely (a) cemented carbide and (b) SiAlON ceramics, for milling rough operations in Inconel® 718 in aged condition was carried out. Furthermore, both the influence of coatings in cemented carbide milling tools and the cutting speed in the ceramic tools were analysed. All tools were tested until the end of their useful life. The cost performance ratio was used to compare the productivity of the tested tools. Despite the results showing higher durability of the coated carbide tool, the ceramic tools presented a better behavior in terms of productivity at higher speed. Therefore, ceramic tools should be used for higher productivity demands, while coated carbide tools for low speed-high volume material removal.

scholarly journals A Threat of Farmers’ Suicide and the Opportunity in Organic Farming for Sustainable Agricultural Development in India

2019 ◽  
Vol 11 (8) ◽  
pp. 2400 ◽  
Author(s):  
Karthikeyan Mariappan ◽  
Deyi Zhou
Keyword(s):  
Organic Farming ◽  
Tamil Nadu ◽  
Agricultural Development ◽  
Small Scale ◽  
Conventional Farming ◽  
Wide Range ◽  
Significant Difference ◽  
Small Scale Farmers ◽  
The Cost ◽  
Input Cost

Agriculture is the main sources of income for humans. Likewise, agriculture is the backbone of the Indian economy. In India, Tamil Nadu regional state has a wide range of possibilities to produce all varieties of organic products due to its diverse agro-climatic condition. This research aimed to identify the economics and efficiency of organic farming, and the possibilities to reduce farmers’ suicides in the Tamil Nadu region through the organic agriculture concept. The emphasis was on farmers, producers, researchers, and marketers entering the sustainable economy through organic farming by reducing input cost and high profit in cultivation. A survey was conducted to gather data. One way analysis of variance (ANOVA) has been used to test the hypothesis regards the cost and profit of rice production. The results showed that there was a significant difference in profitability between organic and conventional farming methods. It is very transparent that organic farming is the leading concept of sustainable agricultural development with better organic manures that can improve soil fertility, better yield, less input cost and better return than conventional farming. The study suggests that by reducing the cost of cultivation and get a marginal return through organic farming method to poor and small scale farmers will reduce socio-economic problems such as farmers’ suicides in the future of Indian agriculture.

Sign in / Sign up

Export Citation Format

Share Document