scholarly journals Determination of Heavy Metal Concentration in Two Bony Fish (Catfish and Tilapia) from Orashi River in Rivers State, Nigeria

2021 ◽  
pp. 20-36
Author(s):  
N. E. Okwodu ◽  
P. U. Okorie ◽  
B. E. B. Nwoke
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Concentration ◽  
Clarias Gariepinus ◽  
Heavy Metal Concentration ◽  
Fish Muscle ◽  
Mean Value ◽  
Bony Fish ◽  
Permissible Limit ◽  
World Health

The research was intended to study the influence of human and industrial activities on the Orashi River and two bony fish (Clarias gariepinus and Tilapia nilotica). Three groups are observed to have impacted the environment – Oil/gas industries, tyre burning from abattoir, untreated human and animal waste from settlers and the abattoir.  The study was carried out from September 2019 to August 2020. The mean concentrations of the parameters studied in some samples were close to or exceeded World Health Organization (WHO) and Federal Ministry of Environment (FMEnv) recommended limits for drinking water and seafood. The results from this study have provided information on the heavy metals profile on the fish of the river.  The level of heavy metals in the muscle of Catfish and Tilapia showed a range of Cadmium in Catfish (1-3.9mg/kg and Tilapia (0.1-4.2mg/kg) with the highest level occurring in station 2 (3.47mg/kg for Catfish and 3.39mg/kg for Tilapia) which is high with regard to FAO 19835, FAO/WHO 10896, EEC 20054 permissible limit of 0.01mg/l and USEPA SQG (1mg/kg) level in seafood. The levels of essential heavy metals in fish muscle were Copper (Catfish-10.9-33mg/kg, Tilapia -17.3-40.6mg/kg), Iron (Catfish-1.0-2.5mg/kg, Tilapia -0.1-5.6mg/kg) were within the FAO 1983 permissible limit while Zinc (Catfish-22-213.2mg/kg) and Tilapia (30.1-196mg/kg) exceeds the limit in some stations. Catfish muscles recorded higher mean value (127.12mg/kg) for all heavy metals than tilapia (44.03mg/kg) and the sequence is Copper > Zinc > Iron > Cadmium. The concentration of heavy metals in Orashi River is in the sequence: Sediment > Catfish > Tilapia >Water. The Total Heavy metal concentration in muscle of Catfish (0.5-1.8mg/kg) and Tilapia (0.1-3.8mg/kg) were within permissible limit.

scholarly journals HEAVY METAL CONCENTRATION AND PROXIMATE ANALYSIS OF SOME SELECTED POULTRY LAYERS FEED PRODUCED IN ADO ODO OTA LOCAL GOVERNMENT

2020 ◽  
Vol 45 (6) ◽  
Author(s):  
S. O Aminu ◽  
F.M. Oladipo
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Local Government ◽  
Moisture Content ◽  
Metal Concentration ◽  
Ph Value ◽  
Raw Materials ◽  
Heavy Metal Concentration ◽  
Proximate Analysis ◽  
World Health

Foods including feed of animals are known to be contaminated with heavy metals and other microbial sources originating from their raw materials, water or processes involved in their preparation or formulation. This study focused on assessing the heavy metal concentration, ash content, moisture content and pH of three different feeds sold around Ado Odo Ota Local Government Area of Ogun State, Nigeria. It was observed that the ash contents of the products varies from 13.19% to 35.24%; moisture content ranges from 4.12% to 8.16% while the three feed are of neutral pH value. The heavy metals concentration varies across each sample (Iron 2.644mg/kg to 6.713mg/kg; Lead 0.15mg/kg to 6.7mg/kg; copper 0.00mg/kg; Zinc 0.065mg/kg to 0.572mg/kg; Chromium 0.003mg/kg to 0.127mg/kg and Manganese 1.946mg/kg to 3.113mg/kg). All parameters obtained were below the Federal Agricultural Organization and World Health Organization except that of Lead obtained in Mubat Feed sample coded as C which is 6.7mg/kg which could have deleterious effect on the health status of layers fed with such feed as well that of man upon consumption of such poultry eggs or meat.

scholarly journals ASSESSMENT OF THE LEVEL OF HEAVY METAL CONCENTRATION IN THE STREET DUST IN SOME SELECTED LOCATIONS IN ZARIA METROPOLIS, KADUNA STATE, NIGERIA

2020 ◽  
Vol 4 (3) ◽  
pp. 93-98
Author(s):  
Suleman H. Nimyel ◽  
M. M. Namadi
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Concentration ◽  
Anthropogenic Activities ◽  
Standard Procedure ◽  
Waste Incineration ◽  
Heavy Metal Concentration ◽  
Street Dust ◽  
World Health ◽  
Health Organization

The study investigate the level of heavy metal concentration in street dust in some selected locations in Zaria metropolis, by monitoring the concentration of Chromium (Cr), Cadmium (Cd), Nickel (Ni), Lead (Pb), and Copper (Cu) for eight weeks. Street dust samples were collected by placing polyethylene bags on randomly selected roof tops and road sides at 20 cm to 30 cm to form composite sample. Sample collected were pre-treated and digested using standard procedure. Atomic Absorption Spectrophotometer (AAS) was used to determine the concentration of heavy metals. Results obtained showed that the concentration of Cr range from 16.670 ±2.20 μg/g to 31.895 ±1.845 μg/g, Cd concentration range from 0.280 ±0.042 μg/g to 1.900 ± 1.202 μg/g, Ni concentration range from 1.560 ±0.254 μg/g to 5.880 ±1.173 μg/g, Pb concentration range from 22.290 ±2.248 μg/g to 95.485 ±3.019 μg/g, Cu concentration range from 0.225 ±0.063 μg/g to 1.280 ±0.353 μg/g. The concentration of all heavy metals are below the limit set be World Health Organization (WHO) and therefore do not pose any health risk to humans. In sampled areas, the main sources of these heavy metals were anthropogenic activities such as open waste incineration, vehicle traffic, and ongoing construction at certain locations.

scholarly journals INVESTIGATION INTO HEAVY METAL CONCENTRATION BY THE GRAVEL ROADSIDES / SUNKIŲJŲ METALŲ KONCENTRACIJŲ ŽVYRKELIŲ PAKELIŲ DIRVOŽEMIUOSE VERTINIMAS / ОЦЕНКА КОНЦЕНТР АЦИЙ ТЯЖЕЛЫХ МЕТАЛЛОВ В ПОЧВЕ ОБОЧИН ГРАВИЙНЫХ ДОРОГ

2011 ◽  
Vol 19 (1) ◽  
pp. 89-100 ◽  
Author(s):  
Audronė Mikalajunė ◽  
Lina Jakučionytė
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Concentration ◽  
Road Dust ◽  
Heavy Metal Concentration ◽  
Concentration Limit ◽  
Roadside Soils ◽  
Oil Emulsion ◽  
Gravel Roads ◽  
The Impact

Vehicles release large amounts of heavy metals to the environment. There have been done a lot of investigations analysing the distribution of heavy metals in soils near intensive regional roads. However, there is lack of investigations into the impact of small-intensity gravel roads on roadside soil contamination with heavy metals. The object of this investigation is four gravel roads of local significance connecting small villages. The intensity of these roads is very low. The gravel roads are chosen according to application of dust-minimizing materials, for example, CaCl2 and oil emulsion. According to our results, none of the soil samples had an excess of heavy metal concentration limit. Besides, heavy metal concentrations were decreasing with a distance from the road increasing. We can make an assumption that road dust-minimizing materials do not have a significant impact on heavy metal distribution in roadside soils. The major factors of heavy metal pollution distribution in roadside soils are traffic intensity, roadside trenches, and topographic conditions. Santrauka Eksploatuojant autotransportą, į aplinką patenka daug sunkiųjų metalų. Atlikta nemažai tyrimų sunkiųjų metalų paplitimuidirvožemyje šalia intensyvių magistralinių kelių nustatyti, tačiau mažo intensyvumo keliai šiuo požiūriu tiriami mažai.Tirti pasirinkta 4 žvyrkeliai – vietinės reikšmvs keliai, jungiantys nedideles gyvenvietes. Eismo intensyvumas šiuose keliuose mažas. Žvyrkeliai pasirinkti pagal taikomas priemones dulkėtumui mažinti, t. y. du nagrinvjami žvyrkeliai apdorotiCaCl2, kiti du – naftos emulsija. Nė viename mėginyje sunkiųjų metalų koncentracijos neviršijo DLK, o tolstant nuo važiuojamosios kelio dalies sunkiųjų metalų koncentracijos buvo mažesnės. Galima daryti prielaidą, kad kelio apdorojimo medžiagos dulkėtumui mažinti žymios įtakos sunkiųjų metalų pasiskirstymui pakelių dirvožemyje nedaro, lemia transporto srauto intensyvumas, kelio grioviai pakelėse bei reljefo sąlygos. Резюме При эксплуатации автомобилей в окружающую среду попадает много тяжелых металлов. Проведено немалоисследований, посвященных анализу распространения тяжелых металлов в почве обочин интенсивно эксплуатируемых магистральных дорог, однако исследований, касающихся аналогичных проблем дорог малой интенсивности, в настоящее время имеется немного. В настоящей работе в качестве объекта исследований выбраны четыредороги местного значения с гравийным покрытием, соединяющие небольшие поселения. Интенсивность дорог небольшая. Гравийные дороги выбраны с учетом их обработки для уменьшения пыльности – две дороги обработаны с применением CaCl2, а две другие – с применением нефтяной эмульсии. Ни в одной пробе не былозафиксировано концентраций тяжелых металлов, превышающих допустимые нормами. С удалением от проезжей части концентрации тяжелых металлов уменьшались. На основании исследований можно сделать вывод о том,что материалы, применявшиеся для уменьшения пыльности дорог, большого влияния на распространениетяжелых металлов в почве обочин дорог не оказывают. На распространение тяжелых металлов в почве обочин оказывает влияние интенсивность транспортного потока, кюветы на обочинах и условия рельефа.

A review of heavy metals in indoor dust and its human health-risk implications

2016 ◽  
Vol 31 (4) ◽  
Author(s):  
Sock Yin Tan ◽  
Sarva Mangala Praveena ◽  
Emilia Zainal Abidin ◽  
Manraj Singh Cheema
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Health Risk ◽  
Human Health ◽  
Metal Concentration ◽  
Heavy Traffic ◽  
Human Health Risk ◽  
Hazard Index ◽  
Heavy Metal Concentration ◽  
Indoor Dust

AbstractIndoor dust acts as a media for heavy metal deposition. Past studies have shown that heavy metal concentration in indoor dust is affected by local human activities and atmospheric transport can have harmful effects on human health. Additionally, children are more sensitive to heavy metals due to their hand-to-mouth behaviour and rapid body development. However, limited information on health risks were found in past dust studies as these studies aimed to identify heavy metal concentrations and sources of indoor dust. The objective of this review is to discuss heavy metal concentration and sources influencing its concentration in indoor dust. Accordingly, high lead (Pb) concentration (639.10 μg/g) has been reported in heavy traffic areas. In addition, this review paper aims to estimate the health risk to children from heavy metals in indoor dust via multiple exposure pathways using the health-risk assessment (HRA). Urban areas and industrial sites have revealed high heavy metal concentration in comparison to rural areas. Hazard index (HI) values found in arsenic (As), chromium (Cr) and Pb were 21.30, 1.10 and 2.40, respectively, indicate that non-carcinogenic elements are found in children. Furthermore, most of the past studies have found that carcinogenic risks for As, cadmium (Cd), Cr and Pb were below the acceptable total lifetime cancer risk (TLCR) range (1×10

scholarly journals Evaluation of removal of heavy metals by microorganisms isolated from industrial effluents

2017 ◽  
Vol 2 (3) ◽  
pp. 156
Author(s):  
S.A. Bhutada ◽  
S.B. Dahikar
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Concentration ◽  
Mutational Analysis ◽  
Bacterial Species ◽  
Natural Habitat ◽  
Strain Improvement ◽  
Industrial Effluents ◽  
Heavy Metal Concentration ◽  
Plate Count

At present various microorganisms are used for bioremediation of heavy metals from soil and water bodies. The aim of present work was to isolate the potential heavy metal degrading organisms and to apply for bioremediation of heavy metals from the domestic as well as industrial waste. The study involves the isolation of the bacterial species residing the natural habitat of such environments and screening of these isolates to degrade different heavy metals such as Cu, Cd, Hg, Ni, and Zn  up to the concentration 2000 ppm. There were six bacterial potential isolates  found namely Pseudomonas spp., (3), Achromobacter spp., Uncultured Microbacterium spp., and Exigoubacterium spp., which showing the growth up to the concentration of 2000 ppm. The potency of the six potential isolates was determined by using the conventional plate count technique.  The percentage removal of analyzed by the use of ICP-AES technique. The study shows isolation of the species which can remove heavy metal up to 60%. It was also found that the increase in the incubation time causes more reduction in the heavy metal concentration. The mutational analysis of the isolates for the strain improvement process shows that the Exigoubacterium species can grow at 3000 ppm heavy metal concentration and showed 60% reduction in heavy metal. This highly potential species can be used for the removal of different heavy metals which is also a viable, eco friendly and cost effective technology for cleanup of the environment. 

scholarly journals Heavy metals contamination of the sediments of the south-eastern Baltic Sea: the impact of economic development

Baltica ◽  
2019 ◽  
Vol 32 (1) ◽  
pp. 51-62
Author(s):  
Alexander Krek ◽  
Aleksandr Danchenkov ◽  
Marina Ulyanova ◽  
Darya Ryabchuk
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Baltic Sea ◽  
Metal Concentration ◽  
Bottom Sediments ◽  
Heavy Metal Concentration ◽  
South Eastern ◽  
Heavy Metals Contamination ◽  
The Impact ◽  
Eastern Baltic

The scope of the study was to assess the impact of potential sources of Cu, Zn, Co, Ni, and Cr on bottom sediments of the Russian sector of the south-eastern Baltic Sea. A total of 68 samples were taken and analyzed for grain-size (laser diffraction and sieve method) and heavy metal concentration (atomic absorption spectroscopy method). To avoid the influence of the sorption capacity of the fine-grained sediments to accumulate the pollutants, the normalization of the heavy metal concentration to Fe was applied. The environmental indices (contamination factor and modified degree of contamination) were calculated. The research has shown the contribution of oil platform, pipelines, ports and wastewater treatment facilities on the geochemical composition of bottom sediments. The authors have identified the level of heavy metals contamination of the middle parts of the Curonian and Vistula spits as a result of alongshore transport of pollutants.

scholarly journals Determination of Heavy Metals in Soil and Plants along Major Road in Hong Local Government Area, Adamawa State, Nigeria

2019 ◽  
pp. 1-10
Author(s):  
Nachana’a Timothy
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Concentration ◽  
Heavy Metal Concentration ◽  
Soil Samples ◽  
Health Concern ◽  
Major Road ◽  
Roadside Soils ◽  
The Road

Heavy metal concentration in roadside soil and plants are increasingly becoming of health concern. This work determined the concentration of selected heavy metals (Cd, Pb, Zn, Cr, Fe, Mg, Mn, Co, Ni and Cu) in roadside soils and plants samples from selected sites (Plaifu, Shiwa, Fadama-rake and Damdrai) along major road in Hong. Soil samples were taken 10 m, 20 m and 30 m away from the edge of the road at the  depth of 0-10 cm, 10-20 cm and 20-30 cm. Plant samples were randomly collected within the vicinity where the soil samples were taken and were analysed using Atomic Absorption Spectrophotometer. The result revealed the trend in soil heavy metal concentration was Fe > Mn > Mg > Pb > Zn > Ni > Co > Cu > Cr > Cd and for plant the trend was Fe > Mn > Mg > Zn > Pb > Ni > Cu > Cd > Co > Cr. The concentrations decreased with increasing distance away from the edge of the road as well as with depth at which the soil sample were taken. The transfer factor showed that the concentration of Zn, Mn, Cu and Mg were greater than 1, which shows that plant were enriched by Zn, Mn, Cu and Mg from the soil. Mg and Cd equal to 1 at Plaifu and Damdrai. Most of the values of TF at the study area super pass 0.5, which implies that generally, the ability of bioaccumulation of these heavy metals in examined plants were relatively high.

scholarly journals Heavy Metal Concentration in Eight Fish Species from Epe Lagoon (Nigeria)

2019 ◽  
Vol 21 (1) ◽  
pp. 69-82
Author(s):  
Iyabode Olusola Taiwo ◽  
Olaniyi Alaba Olopade ◽  
Nathanael Akinsafe Bamidele
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Atomic Absorption ◽  
Metal Concentration ◽  
Fish Species ◽  
Heavy Metal Concentration ◽  
Atomic Absorption Spectrophotometry ◽  
Human Consumption ◽  
Heavy Metal Concentrations ◽  
Absorption Spectrophotometry

Abstract This research was undertaken to find out the levels of five heavy metals (Cu, Fe, Mn, Pb, and Zn) in the muscles of eight fish species from Epe Lagoon. The levels of heavy metals were determined by atomic absorption spectrophotometry after digestion of the samples using Kjldahl heating digester. The heavy metal concentrations among the fish species were statistically dissimilar (P < 0.5). The heavy metals of Pb, Fe, and Mn were above the FAO/WHO agreeable limits for human consumption.

scholarly journals Ultra-portable, smartphone-based spectrometer for heavy metal concentration measurement in drinking water samples

2021 ◽  
Vol 11 (11) ◽  
Author(s):  
Satyam Srivastava ◽  
Vinay Sharma
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Drinking Water ◽  
Data Collection ◽  
Metal Concentration ◽  
Water Samples ◽  
Heavy Metal Concentration ◽  
Concentration Measurement ◽  
Visible Radiation ◽  
Drinking Water Samples

AbstractHeavy metals are very toxic and hazardous for human health. Onsite screening of heavy metal contaminated samples along with location-based automation data collection is a tedious job. Traditionally high-end equipment’s such as gas chromatography mass spectrometer (GC–MS) and atomic absorption spectrometers have been used to measure the concentration of different heavy metals in water samples but most of them are costly, bulky, and time consuming, and requires expert human intervention. This manuscript reports an ultra-portable, rapid, cost-effective, and easy-to-use solution for onsite heavy metal concentration measurement in drinking water samples. Presented solution combines off-the-shelf available chemical kits for heavy metal detection and developed spectrometer-based readout for concentration prediction, quality judgment, and automatic data collection. Two chemical kits for copper and iron detection have been imported form Merck and have been used for overall training and testing. The developed spectrometer has capability to work with smartphone-based android app and also can work in standalone mode. The developed spectrometer uses white light-emitting diode as a source and commercially imported spectral sensor (AS7262) for visible radiation reception. A low-power sub-GHZ-based wireless embedded platform has been developed and interfaced with source and detector. A power management module also has been designed to monitor the battery status and also to generate low battery indication. Overall modules has been packaged in custom designed enclosure to avoid external light interference. The developed system has been trained using standard buffer samples with known heavy metal concentrations and further tested for water samples collected from institute colony and nearby villages. The obtained results have been validated with commercially imported system from HANNA instruments, and it has been observed that developed system has shown excellent accuracy to predict heavy metal concentration (tested for Fe and Cu) in water samples.

Sign in / Sign up

Export Citation Format

Share Document