scholarly journals Happy Seeder Machine Enable Direct Drilling of Wheat (Triticum aestivum) in Rice-wheat Cropping System

2019 ◽  
pp. 1-6
Author(s):  
Balkaran Singh Sandhu ◽  
Nirmaljit Singh Dhaliwal
Keyword(s):  
Economic Analysis ◽  
Grain Yield ◽  
Conventional Method ◽  
Low Cost ◽  
Cropping System ◽  
Cost Effective ◽  
Conventional Tillage ◽  
Net Return ◽  
Tillage System ◽  
The Cost

A field experiment was conducted during Rabi 2015-16, 2016-17 and 2017-18 by Krishi Vigyan Kendra Muktsar, to find out the performance of happy seeder machine for sowing of wheat after rice crop. Happy seeder tackles the problem of paddy straw which can convert this waste into resource. In the area, farmers generally burn rice residues because they felt that it interferes with tillage and seeding operations for the succeeding crops and it has no much economical use. The average grain yield revealed that happy seeder sown crop gave 47.5 q/ha grain yield as compared to 49.6 q/ha in conventional sown method. Net return was calculated during all the years. Happy seeder sown crop gave higher net return (Rs 55279.2/ha) from conventional method (Rs. 52189.7/ha). Net return was higher due to less cost of cultivation (Rs. 22325/ha) from Rs 28641.6/ha under conventional sowing method. So with Happy seeder, low cost of production with respect to conventional tillage system gave maximum net return and it is a cost effective technology. The cost of cultivation in happy seeder was also lesser than conventional method mainly due to less cost on tillage preparation, saving in weedicides, fertilizers etc. Farmers are more interested in variable costs and economic return of newly introduced enterprises. Economic analysis assists researches to plan their research for detailed investigation and to make decision, so that it may be recommended to the farmers. So, economic analysis is essential to check the profitability and net return of the system.

scholarly journals Production potential and economics of wheat, Triticum aestivum as influenced by different planting methods in Punjab, India

2016 ◽  
Vol 8 (2) ◽  
pp. 777-781
Author(s):  
Balkaran Singh Sandhu ◽  
Nirmaljit Singh Dhaliwal ◽  
Gurmail Singh Sandhu
Keyword(s):  
Grain Yield ◽  
Rice Straw ◽  
Conventional Method ◽  
Conventional Tillage ◽  
Cost Ratio ◽  
Zero Tillage ◽  
Net Return ◽  
Benefit Cost Ratio ◽  
Planting Methods ◽  
Tillage Method

The burning of rice straw after rice harvest in the Rice-Wheat System can be overcome by direct seeding of wheat by in standing and loose rice straw. To find out the most appropriate method of wheat sowing after rice crop in Sri Muktsar Sahib district, a field experiment was conducted with five different sowing methods including zero tillage and happy seeder. Among the different planting methods maximum grain yield was obtained with the conventional (52.26 q/ha) and happy seeder without loose straw (51.93 q/ha) planting method as compared to happy seeder with loose straw (50.83 q/ha), zero tillage (49.80 q/ha) and conventional method with mulching (49.66 q/ha). However, the benefit-cost ratio was higher by happy seeder with (2.38:1) and without loose straw (2.35:1) as compared to zero tillage method (2.31:1) and conventional (2.14:1). Higher B:C ratio with happy seeder was also due to its lesser cost of cultivation as compared to conventional method of sowing. The higher net return obtained from happy seeder with and without loose straw Rs. 50104 and Rs. 51019/ha respectively as compared zero tillage method (Rs 48663/ha) and conventional tillage method (Rs. 49856/ha). Although the grain yield under conventional method of sowing was higher but it failed to produce higher net return and B:C ratio. Happy Seeder technology is a time savings, good option against burning of rice residue in Punjab.

scholarly journals Productivity and Profitability of Cotton-wheat Cropping System as Influenced by Complex Fertilizers

2020 ◽  
pp. 1-7
Author(s):  
B. S. Brar ◽  
G. S. Dheri ◽  
Fatehjeet Singh Sekhon
Keyword(s):  
Economic Analysis ◽  
Grain Yield ◽  
Cropping System ◽  
Wheat Crop ◽  
Cotton Yield ◽  
Straw Yield ◽  
Net Return ◽  
Stalk Yield

An experiment was conducted during 2012-13 and 2013-14 at Ludhiana, Punjab to find out the productivity and profitability of the cotton-wheat cropping system as influenced by complex fertilizers. The experiment was comprised of nine fertilizer treatments. The results demonstrated that significantly higher cotton yield and stalk yield was recorded under T9 -AP60+S15+Zn1.5 (15.3 q/ha and 50.5 q/ha respectively in 2012 and 22.2 q/ha and 55.6 respectively in 2013) which was statistically at par with T6 – DAP (P60)+S15+Zn1.5 (15.0 q/ ha and 50.4 q/ha respectively in 2012 and 22.1 q/ha and 55.4 q/ha, respectively in 2013). Similarly in wheat crop, T9 -AP60+S15+Zn1.5 gave significantly higher grain yield and straw yield (39.0 q/ha and 63.0 q/ha, respectively in 2012-13 and 45.6 q/ha and 73.6, respectively in 2013-14) which was comparable with T6 – DAP (P60)+S15+Zn1.5 (38.5 q/ ha and 62.8 q/ha respectively in 2012-13 and 44.4 q/ha and 72.4 q/ha in 2013-14)  as compare to other treatments. Economic analysis indicated higher net return (₹ 8739.0) and B:C ratio (0.37) for cotton under T8- AP30+S7.5+Zn0.75 whereas T9 -AP60+S15+Zn1.5 net return (₹14417.5) and B:C ratio (1.07) for wheat as compare with other treatments.

Janus – A New Approach to Air Combat Pilot Training

2019 ◽  
Vol 2019 (4) ◽  
pp. 7-22
Author(s):  
Georges Bridel ◽  
Zdobyslaw Goraj ◽  
Lukasz Kiszkowiak ◽  
Jean-Georges Brévot ◽  
Jean-Pierre Devaux ◽  
...  
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Energy ◽  
Training System ◽  
Embedded Sensors ◽  
Pilot Training ◽  
New Approach ◽  
Combat Aircraft ◽  
Air Combat ◽  
The Cost

Abstract Advanced jet training still relies on old concepts and solutions that are no longer efficient when considering the current and forthcoming changes in air combat. The cost of those old solutions to develop and maintain combat pilot skills are important, adding even more constraints to the training limitations. The requirement of having a trainer aircraft able to perform also light combat aircraft operational mission is adding unnecessary complexity and cost without any real operational advantages to air combat mission training. Thanks to emerging technologies, the JANUS project will study the feasibility of a brand-new concept of agile manoeuvrable training aircraft and an integrated training system, able to provide a live, virtual and constructive environment. The JANUS concept is based on a lightweight, low-cost, high energy aircraft associated to a ground based Integrated Training System providing simulated and emulated signals, simulated and real opponents, combined with real-time feedback on pilot’s physiological characteristics: traditionally embedded sensors are replaced with emulated signals, simulated opponents are proposed to the pilot, enabling out of sight engagement. JANUS is also providing new cost effective and more realistic solutions for “Red air aircraft” missions, organised in so-called “Aggressor Squadrons”.

scholarly journals Effects of conservation agriculture on productivity and Economics of maize-wheat based cropping systems in midwestern Nepal

2019 ◽  
Vol 17 (1) ◽  
pp. 49-63
Author(s):  
K Pariyar ◽  
A Chaudhary ◽  
P Sapkota ◽  
S Sharma ◽  
CB Rana ◽  
...  
Keyword(s):  
Grain Yield ◽  
Cropping Systems ◽  
Cropping System ◽  
Conservation Agriculture ◽  
Crop Productivity ◽  
Conventional Tillage ◽  
Net Income ◽  
Zero Tillage ◽  
Higher Plant ◽  
Equivalent Yield

The effects of two tillage methods (zero tillage and conventional tillage), two residue managements (residue kept and residue removed) and two levels of cropping system (maize + soybean and sole maize) were studied over 3 years (2015-2017) at Dailekh district of Nepal. Arun-2 and Puja were the varieties of maize and soybean used respectively, followed by winter wheat. The results revealed that the maize + soybean system had significantly higher plant population and ear population (34.83 thousands ha-1 and 34.35 thousands ha-1, respectively), grains per row (37.1), ear length (16.6 cm) and 20.5% higher grain yield as compared to sole maize. The highest maize equivalent yield (7.92 t ha-1) was recorded in maize + soybean as compared to the lower grain yield equivalent (7.06 t ha-1) in sole maize. Zero tillage accounted relatively higher benefits (high net income and B:C ratio) as compared to conventional tillage. The residue kept plot resulted significantly higher B:C ratio (2.41) than the residue removed (2.11) and the maize + soybean recorded 82.5% greater B:C ratio compared to sole maize. Net annual income was significantly higher in zero tillage, residue kept and maize + soybean system (NRs. 223072.00, 222958.00 and 269016.00 ha-1 respectively). Such combinations are recommended for Dailekh district of Nepal to have profitable crop productivity. SAARC J. Agri., 17(1): 49-63 (2019)

scholarly journals Growth and biochemical composition of Chlorella vulgaris in different growth media

2013 ◽  
Vol 85 (4) ◽  
pp. 1427-1438 ◽  
Author(s):  
MATHIAS A. CHIA ◽  
ANA T. LOMBARDI ◽  
MARIA DA GRACA G. MELAO
Keyword(s):  
Biomass Production ◽  
Chlorella Vulgaris ◽  
Biochemical Composition ◽  
Physiological Response ◽  
Low Cost ◽  
Cost Effective ◽  
Growth Conditions ◽  
Growth Media ◽  
Continuous Cultures ◽  
The Cost

The need for clean and low-cost algae production demands for investigations on algal physiological response under different growth conditions. In this research, we investigated the growth, biomass production and biochemical composition of Chlorella vulgaris using semi-continuous cultures employing three growth media (LC Oligo, Chu 10 and WC media). The highest cell density was obtained in LC Oligo, while the lowest in Chu medium. Chlorophyll a, carbohydrate and protein concentrations and yield were highest in Chu and LC Oligo media. Lipid class analysis showed that hydrocarbons (HC), sterol esthers (SE), free fatty acids (FFA), aliphatic alcohols (ALC), acetone mobile polar lipids (AMPL) and phospholipids (PL) concentrations and yields were highest in the Chu medium. Triglyceride (TAG) and sterol (ST) concentrations were highest in the LC Oligo medium. The results suggested that for cost effective cultivation, LC Oligo medium is the best choice among those studied, as it saved the cost of buying vitamins and EDTA associated with the other growth media, while at the same time resulted in the best growth performance and biomass production.

scholarly journals Protection of computers from side electromagnetic radiation during monitor images formation

2021 ◽  
Vol 4 (4) ◽  
pp. 377-385
Author(s):  
Volodymyr M. Lucenko ◽  
Dmytro O. Progonov
Keyword(s):  
Electromagnetic Radiation ◽  
Ad Hoc ◽  
Low Cost ◽  
Cost Effective ◽  
Switching Speed ◽  
Cost Effective Approach ◽  
Alternative Approach ◽  
Confidential Data ◽  
The Cost ◽  
Communication Lines

Reliable protection of confidential data processed in critical information infrastructure elements of public institutions and private organizations is topical task today. Of particular interest are methods to prevent the leakage of confidential data by localizing informative (dangerous) signals that both carry an informative component, and have a signal level higher than predefined threshold. The increase in signal energy from personal computers is caused by increasing of its transistors switching speed. Modern passive shielding methods for secured computers, similar to the well-known program TEMPEST, require either costly and large shielding units or technological simplification by using of low-cost fragmentary shielding of computer’s individual elements. Therefore, localization of side electromagnetic radiation produced by personal computer is needed. The paper presents a cost-effective approach to reducing the level of computer’s electromagnetic radiation by passive method. The radiation are localized and measured by its estimation on personal computer’s elements, namely unshielded communication lines between video processor and a monitor, fragments of electric tracks on motherboards, etc. During experiments authors used ad-hoc miniature electric (ball antenna) and magnetic (Hall sensor) antennas connected to selective voltmeters. This approach significantly reduces the cost of equipment and measurements as well as requirements to analytics’ qualification for improving computer’s protection. Also, the alternative approach for computer protection is proposed. The approach is based on image content protection by distorting the image on the monitor instead of reducing electromagnetic radiation caused by signals from the monitor. The protection includes image scrambling using Arnold transform that randomly “shuffle” the lines in each frame.

An Active Low Cost Mesh Networking Indoor Tracking System

2014 ◽  
Vol 6 (1) ◽  
pp. 45-79 ◽  
Author(s):  
Sean Carlin ◽  
Kevin Curran
Keyword(s):  
Tracking System ◽  
Low Cost ◽  
Cost Effective ◽  
Limiting Factors ◽  
Unique Contribution ◽  
Scalable Vector Graphics ◽  
Web Technologies ◽  
Working Environments ◽  
System A ◽  
The Cost

Indoor radio frequency tracking systems are generally quite expensive and can vary in accuracy due to interference, equipment quality or other environmental factors. Due to these limiting factors of the technology, many businesses today find it hard to justify investing in RFID tracking technologies to improve the safety, efficiency and security of their working environments. The aim of this project was to provide a budget RFID tracking system that was capable of tracking a person or object through an indoor environment. To minimize the cost of the RFID tracking system, the components of the system were built from existing electronic equipment and hardware. The software was also written to minimize licensing and support fees allowing a cost effective budget RFID tracking system to be developed. The tracking system consists of a tag, reader nodes and a PC reader which utilize synapse RF 100 engines with python scripts embedded on to the chips. The tracking system software operates through a web portal utilizing web technologies such as HTML, JavaScript and PHP to allow the tags location to be represented on a two dimensional map using scalable vector graphics. During development of the system a new trilateration algorithm was developed and used convert the signals received from the tag to a virtual position on the map correlating to the actual physical position of the tag. A unique contribution of this system is the low cost of building which we estimate as less than £200 UK sterling for a five node system.

scholarly journals Self-managed, computerised word finding therapy as an add-on to usual care for chronic aphasia post-stroke: An economic evaluation

2020 ◽  
pp. 026921552097534
Author(s):  
Nicholas R Latimer ◽  
Arjun Bhadhuri ◽  
Abu O Alshreef ◽  
Rebecca Palmer ◽  
Elizabeth Cross ◽  
...  
Keyword(s):  
Cost Effectiveness ◽  
Usual Care ◽  
Low Cost ◽  
Controlled Trial ◽  
Life Time ◽  
Cost Effective ◽  
Quality Adjusted Life Year ◽  
Post Stroke ◽  
Word Finding ◽  
The Cost

Objective: To examine the cost-effectiveness of self-managed computerised word finding therapy as an add-on to usual care for people with aphasia post-stroke. Design: Cost-effectiveness modelling over a life-time period, taking a UK National Health Service (NHS) and personal social service perspective. Setting: Based on the Big CACTUS randomised controlled trial, conducted in 21 UK NHS speech and language therapy departments. Participants: Big CACTUS included 278 people with long-standing aphasia post-stroke. Interventions: Computerised word finding therapy plus usual care; usual care alone; usual care plus attention control. Main measures: Incremental cost-effectiveness ratios (ICER) were calculated, comparing the cost per quality adjusted life year (QALY) gained for each intervention. Credible intervals (CrI) for costs and QALYs, and probabilities of cost-effectiveness, were obtained using probabilistic sensitivity analysis. Subgroup and scenario analyses investigated cost-effectiveness in different subsets of the population, and the sensitivity of results to key model inputs. Results: Adding computerised word finding therapy to usual care had an ICER of £42,686 per QALY gained compared with usual care alone (incremental QALY gain: 0.02 per patient (95% CrI: −0.05 to 0.10); incremental costs: £732.73 per patient (95% CrI: £674.23 to £798.05)). ICERs for subgroups with mild or moderate word finding difficulties were £22,371 and £21,262 per QALY gained respectively. Conclusion: Computerised word finding therapy represents a low cost add-on to usual care, but QALY gains and estimates of cost-effectiveness are uncertain. Computerised therapy is more likely to be cost-effective for people with mild or moderate, as opposed to severe, word finding difficulties.

scholarly journals Tillage, Residue, Fertilizer and Weed Management on Phenology and Yield of Spring Maize in Terai, Nepal

2014 ◽  
Vol 2 (3) ◽  
pp. 328-335
Author(s):  
Saugat Dahal ◽  
Tika Bahadur Karki ◽  
Lal Prasad Amgain ◽  
Birendra Kumar Bhattachan
Keyword(s):  
Grain Yield ◽  
Weed Management ◽  
Management Practices ◽  
Cropping System ◽  
Conventional Tillage ◽  
No Tillage ◽  
Alternative Technologies ◽  
Spring Maize ◽  
Seed Fill ◽  
Herbicide Use

With the aim of developing crop management technologies that reduce the yield gap of maize (Zea mays L.) in Nepal, a study was carried-out to determine whether the grain yield of maize could be manipulated through tillage, residue, and nutrient and weed management practices. The effect of tillage (conventional and no tillage), residue (residue retained and residue removed), fertilizer (recommended doses of fertilizer and farmers’ doses of fertilizer) and weed management practices (herbicide use and manual weeding) on phenology and grain yield of maize were investigated under maize-rice cropping system in Rampur, Nepal during 2013. The experimental results revealed that no tillage had significant effect on grain yield (6.64 Mg ha-1) and phenological parameters like days to silking, physiological maturity and seed fill duration. Similarly, residue retained treatment had significant effect on grain yield (7.02 Mg ha-1) and phenological parameters. Research dose of fertilizer had significant effect on phenological parameters and grain yield (8.42 Mg ha-1). However, weed management factor did not influence significantly on grain yield and phenological parameters. The grain yield increased in no tillage by 23.19% over conventional tillage, residue retained by 39.84% over residue removed, recommended doses of fertilizer by 132.60% over farmer dose of fertilizer. Thus, no tillage, residue retention, recommended doses of fertilizer and use of herbicide for weed management can be alternative technologies for sustainable higher grain yield. DOI: http://dx.doi.org/10.3126/ijasbt.v2i3.11001Int J Appl Sci Biotechnol, Vol. 2(3): 328-335  

Development of Calibration Equipment for Geodetic Angle Measurement Instruments

2015 ◽  
Vol 220-221 ◽  
pp. 396-400
Author(s):  
Lauryna Šiaudinytė ◽  
Deividas Sabaitis ◽  
Domantas Bručas ◽  
Gintaras Dmitrijev
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
Angle Measurement ◽  
Measurement Instruments ◽  
Measurement Systems ◽  
Complex Processes ◽  
Cost Effective Alternative ◽  
Reducing Costs ◽  
The Cost

Production of high precision circular scales is a complicated process requiring expensive equipment and complex processes to achieve. Precision angle measurement equipment tends to be very expensive and therefore not accessible to all in need. Simplification of production of such devices can lead to reducing costs of angle measurement systems ensuring easier accessibility. A new method of producing precision circular scales using low cost mass production can reduce the costs of these devices drastically. Therefore, utilising a common CD technology as the basis for such scales is analysed. This paper deals with the analysis of the newest laser cutting method for plastic circular scales. Preliminary results of manufacturing such scales are presented in the paper as well as measurements of the grating of the scale were performed. The quality of different scales manufactured using different laser types is analysed in the study. The cost – effective alternative of manufacturing circular scales is discussed in the paper.

Sign in / Sign up

Export Citation Format

Share Document