scholarly journals A Novel Spectrophotometric Determination and Kinetic Study of Sulfamethoxazole in Pure and Tablet Formulation using 9-chloroacridine Reagent

2021 ◽  
pp. 1-13
Author(s):  
Alaa A. Ahmed ◽  
Theia’a N. Al-Sabha ◽  
Emad A. S. Al-Hyali
Keyword(s):  
Complex Formation ◽  
Thermodynamic Functions ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Official Method ◽  
First Order ◽  
Pseudo First Order ◽  
Semi Empirical ◽  
Good Detection

A spectrophotometric method has been developed for analysis of Sulfamethoxazole (SMX) in pure and dosage forms. The method is based on the reaction of the SMX with 9-chloroacridine (9-CA) reagent in organic and acidic medium, to produce a yellow product having maximum absorption at 448 nm. Beer’s law was obeyed in the concentration range 1-30 μg.ml-1 with molar absorptivity of 1.63x104 L.mol-1.cm-1 with good detection and quantification limits. Accuracy (Average recovery %) and precision are 98.43% and 0.651, respectively. The proposed method was applied successfully for determination of Sulfamethoxazole in its commercial dosage form as tablet and agree well with the official method. The equilibrium constant and the thermodynamic functions (ΔHo, ΔGº and ΔSº) of the  complex formation were estimated. The study revealed that the complex formation could occur spontaneously, the type of interacting forces between SMX and 9-CA are physical is nature and association increases the order of the studied systems. The results of kinetic parameters indicated that, the reaction is pseudo first order with respect to SMX. The rate constant at various temperatures and the thermodynamic functions of activation were determined. Theoretical parameters were calculated by applying the semi-empirical Austin method (AM1). These parameters are helped to suggest reaction mechanism and supporting other results.

scholarly journals Pyrocatechol Violet in Pharmaceutical Analysis Part II. A Spectrophotometric Method for the Determination of Paracetamol in Pure and in Pharmaceutical Dosage Forms

2001 ◽  
Vol 69 (2) ◽  
pp. 179-188 ◽  
Author(s):  
Alaa Amin
Keyword(s):  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Ion Pair ◽  
Official Method ◽  
Pyrocatechol Violet ◽  
Pharmaceutical Dosage Forms ◽  
Selective Determination ◽  
Significant Difference

A spectrophotometric method for the selective determination of paracetamol based on its reaction with pyrochatechol violet under basic conditions to form an ion-pair complex is described. The absorption maximum of the coloured ion-pair formed is observed at 652 nm and the molar absorptivity is 4.54 x10-3l mol-1 cm-1. Beer's law is obeyed over the concentration range 0.5-34.0 μg ml-1, while that obtained using Ringbom method is in the range 3.5 -32.0 μg ml-1. There is no interference from common additives, excipients and commercial drugs present in their formulations suggesting a highly selective procedure compared with others. Statistical analysis of the obtained results showed that there is, no significant difference and absence of any systematic error in the method compared with the official one. The method is simple, rapid and convenient and was applied successfully to the determination of paracetamol in pure and in its dosage forms compared with the official method.

scholarly journals Spectrophotometric determination of etamsylate in pharmaceuticals using ferric chloride based on complex formation reactions

2010 ◽  
Vol 16 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Vinay Basavaiah ◽  
Doddarevanna Revanasiddappa ◽  
Zenita Devi ◽  
Kanakapura Basavaiah
Keyword(s):  
Complex Formation ◽  
Ferric Chloride ◽  
Rapid Determination ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Neutral Medium ◽  
Spectrophotometric Methods ◽  
Ich Guidelines ◽  
Precision And Accuracy

The present study describes two simple and selective spectrophotometric methods for the rapid determination of etamsylate (ETM) in bulk and in capsule formulations. The methods are based on the oxidation of ETM with ferric chloride in neutral medium and subsequent chelation of the resulting iron(II) with 1,10-phenanthroline (Phen) (method A) and with 2,2?-bipyridyl (Bipy) (method B). The resulting red colored chromogens are measured at 510 and 520 nm, in method A and B, respectively. In both methods, the absorbance is found to increase linearly with increasing ETM concentration. Beer?s law is obeyed over the ranges 0.5-10 and 0.8-16 ?g/ml for method A and B, respectively. The calculated molar absorptivity values are 2.17?104 and 1.65?104 l/mol/cm for method A and B, respectively, and the corresponding sandell sensitivities are 0.012 and 0.016 ?g/cm2. Intra-day and inter-day precision and accuracy of the methods were established according to ICH guidelines. The proposed methods were applied to determine ETM in dosage forms and the results were statistically compared with that of an official BP method.

Colorimetric Determination of Fluoride in Drinking Groundwater using a Polymeric Zirconium Complex of 5-(2-Carboxyphenylazo)-8-Hydroxyquinoline

2013 ◽  
Vol 12 (7) ◽  
pp. 460-465
Author(s):  
Sameer Amereih ◽  
Zaher Barghouthi ◽  
Lamees Majjiad
Keyword(s):  
Drinking Water ◽  
Detection Limit ◽  
Complex Formation ◽  
Molar Absorptivity ◽  
Colorimetric Determination ◽  
Zirconium Complex ◽  
Reliable Determination ◽  
Percentage Recovery ◽  
Quantitation Limit

A sensitive colorimetric determination of fluoride in drinking water has been developed using a polymeric zirconium complex of 5-(2-Carboxyphenylazo)-8-Hydroxyquinoline as fluoride reagents. The method allowed a reliable determination of fluoride in range of (0.0-1.5) mg L-1. The molar absorptivity of the complex formation is 7695 ± 27 L mol-1 cm-1 at 460 nm. The sensitivity, detection limit, quantitation limit, and percentage recovery for 1.0 mg L-1 fluoride for the proposed method were found to be 0.353 ± 0.013 μg mL-1, 0.1 mg L-1, 0.3 mg L-1, and 101.7 ± 4.1, respectively.

Spectrophotometeric Determination of Trifluoperazine HCL in Pure Forms and Pharmaceutical Preperations

2017 ◽  
Vol 9 (5) ◽  
Author(s):  
Mohammad Hamzah Hamzah ◽  
Rawa M M Taqi ◽  
Muna M. Hasan ◽  
Raid J. M. Al-Timimi
Keyword(s):  
Standard Method ◽  
Limit Of Detection ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Oxidizing Agent ◽  
Optimum Conditions ◽  
Limit Of Quantification ◽  
Cerium Ion ◽  
Blank Solution

A simple and accurate spectrophotometric method for the determination of Trifluoperazine HCl in pure and dosage forms was developed. The method is based on the reaction between Trifluoperazine HCl and p-chloroaniline in the presence of cerium ion as oxidizing agent which lead to the formation of violate color product that absorbed at a maximum wavelength 570nm while the blank solution was pink. Under the optimum conditions a linear relationship between the intensity and concentration of TRF in the range 4-50μg/ml was obtained . The molar absorptivity 3.74×103 L.mol-1.cm-1 , Limit of detection (2.21μg/ml), while limit of quantification was 7.39μg/ml. The proposed analytical method was compared with standard method using t-test and F-test , the obtained results shows there is no significant differences between proposed method and standard method. Based on that the proposed method can be used as an alternative method for the determination of TRF in pure and dosage forms.

scholarly journals Simple Spectrophotometric Method for Determination of Paroxetine in Tablets Using 1,2-Naphthoquinone-4-Sulphonate as a Chromogenic Reagent

2009 ◽  
Vol 2009 ◽  
pp. 1-8 ◽  
Author(s):  
Ibrahim A. Darwish ◽  
Heba H. Abdine ◽  
Sawsan M. Amer ◽  
Lama I. Al-Rayes
Keyword(s):  
Spectrophotometric Method ◽  
Correlation Coefficients ◽  
Molar Absorptivity ◽  
Official Method ◽  
Calibration Data ◽  
Pharmaceutical Tablets ◽  
Relative Standard ◽  
Label Claim ◽  
Colored Product

Simple and rapid spectrophotometric method has been developed and validated for the determination of paroxetine (PRX) in tablets. The proposed method was based on nucleophilic substitution reaction of PRX with 1,2-naphthoquinone-4-sulphonate (NQS) in an alkaline medium to form an orange-colored product of maximum absorption peak () at 488 nm. The stoichiometry and kinetics of the reaction were studied, and the reaction mechanism was postulated. Under the optimized reaction conditions, Beer's law correlating the absorbance (A) with PRX concentration (C) was obeyed in the range of 1–8 g . The regression equation for the calibration data was: A = 0.0031 + 0.1609 C, with good correlation coefficients (0.9992). The molar absorptivity () was L  1 . The limits of detection and quantitation were 0.3 and 0.8 g , respectively. The precision of the method was satisfactory; the values of relative standard deviations did not exceed 2%. The proposed method was successfully applied to the determination of PRX in its pharmaceutical tablets with good accuracy and precisions; the label claim percentage was %. The results obtained by the proposed method were comparable with those obtained by the official method.

scholarly journals Development and validation of spectrophotometric method for phenylephrine hydrochloride estimation in nasal drops formulations

2008 ◽  
Vol 27 (2) ◽  
pp. 149 ◽  
Author(s):  
Ivana Savić ◽  
Goran Nikolić ◽  
Vladimir Banković
Keyword(s):  
Standard Deviation ◽  
Sodium Hydroxide ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Phenylephrine Hydrochloride ◽  
Relative Standard ◽  
Development And Validation

Simple, accurate and reproducible UV-spectrophotometric method was developed and validated for the estimation of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. Phenylephrine hydrochloride was estimated at 291 nm in 1 mol⋅dm-3 sodium hydroxide (pH 13.5). Beer’s law was obeyed in the concentration range of 10–100 μg⋅cm−3 (r2 = 0.9990) in the sodium hydroxide medium. The apparent molar absorptivity was found to be 1.63×103 dm3⋅mol−1⋅cm−1. The method was tested and validated for various parameters according to the ICH (International Conference on Harmonization) guidelines. The detection and quantitation limits were found to be 0.892 and 2.969 μg⋅cm−3, respectively. The proposed method was successfully applied for the determination of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. The results demonstrated that the procedure is accurate, precise and reproducible (relative standard deviation < 1 %), while being simple, cheap and less time consuming, and hence can be suitably applied for the estimation of phenylephrine hydrochloride in different dosage forms.

scholarly journals Safety method, Spectrophotometric Determination of Sulfamethaxazole drug in bulk and Pharmaceutical Preparations

2010 ◽  
Vol 7 (1) ◽  
pp. 607-613 ◽  
Author(s):  
Baghdad Science Journal
Keyword(s):  
Acidic Medium ◽  
Pharmaceutical Preparations ◽  
Color Stability ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Reaction Conditions ◽  
Pharmaceutical Dosage Forms ◽  
Stability Period ◽  
Orange Color

A simple, cheap, fast, accurate, Safety and sensitive spectrophotometric method for the determination of sulfamethaxazole (SFMx), in pure form and pharmaceutical dosage forms. has been described The Method is based on the diazotization of the drug by sodium nitrite in acidic medium at 5Cº followed by coupling with salbutamol sulphate (SBS) drug to form orange color the product was stabilized and measured at 452 nm Beer’s law is obeyed in the concentration range of 2.5-87.5 ?g ml-1 with molar absorptivity of 2.5x104 L mole-1 cm-1. All variables including the reagent concentration, reaction time, color stability period, and sulfamethaxazole /salbutamol ratio were studied in order to optimize the reaction conditions. No interferences were observed Results of analysis were validated statistically and by recovery studies. These methods are successfully employed for the determination of sulfamethaxazole in some pharmaceutical preparations.. The developed method is easy to use and accurate for routine studies relative to HPLC and other techniques.

scholarly journals Indirect spectrophotometric Indirect spectrophotometric determination of chlordiazepoxide in pharmaceutical formulations via oxidative coupling reaction with phenothiazine

2018 ◽  
pp. 7-14
Author(s):  
Hind Hadi ◽  
Mariam Jamal
Keyword(s):  
Oxidative Coupling ◽  
Coupling Reaction ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Calibration Plot ◽  
Pharmaceutical Dosage Forms ◽  
Oxidative Coupling Reaction ◽  
Formed Product

Abstract A sensitive, precise and reliable indirect spectrophotometric method for the determination of chlordiazepoxide (CDE) in pure and pharmaceutical dosage forms is described. The method is based on oxidative coupling reaction between amino group resulting from acidic decomposition of CDE with phenothiazine in the presence of sodium periodate to produce an intense green soluble dye that is stable and shows a maximum absorption at 602 nm. The calibration plot indicates that Beer’s law is obeyed over the concentration range of 0.1?50 µg/mL, with a molar absorptivity of 1×104 L/mol cm and correlation coefficient of 0.9994.All the conditions that affecting on the stability and sensitivity of the formed product were studied and optimized and the suggested method was effectively applied for the determination of CDE in commercial dosage forms.

scholarly journals New Spectrofluorimetric Method with Enhanced Sensitivity for Determination of Paroxetine in Dosage Forms and Plasma

2008 ◽  
Vol 3 ◽  
pp. ACI.S1053 ◽  
Author(s):  
Ibrahim A. Darwish ◽  
Sawsan M. Amer ◽  
Heba H. Abdine ◽  
Lama I. Al-Rayes
Keyword(s):  
High Sensitivity ◽  
Dosage Forms ◽  
Official Method ◽  
Factors Affecting ◽  
Pharmaceutical Tablets ◽  
Enhanced Sensitivity ◽  
Spectrofluorimetric Method ◽  
Relative Standard ◽  
Optimized Conditions

New simple spectrofluorimetric method with enhanced sensitivity has been developed and validated for the determination of the antidepressant paroxetine (PXT) in its dosage forms and plasma. The method was based on nucleophilic substitution reaction of PXT with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole in an alkaline medium (pH 8) to form a highly fluorescent derivative that was measured at 545 nm after excitation at 490 nm. The factors affecting the reaction was carefully studied and optimized. The kinetics of the reaction was investigated, and the reaction mechanism was presented. Under the optimized conditions, linear relationship with good correlation coefficient (0.9993) was found between the fluorescence intensity and PXT concentration in the range of 80-800 ng ml-1. The limits of detection and quantitation for the method were 25 and 77 ng ml-1, respectively. The precision of the method was satisfactory; the values of relative standard deviations did not exceed 3%. The proposed method was successfully applied to the determination of PXT in its pharmaceutical tablets with good accuracy; the recovery values were 100.2 ± 1.61%. The results obtained by the proposed method were comparable with those obtained by the official method. The proposed method is superior to the previously reported spectrofluorimetric method for determination of PXT in terms of its higher sensitivity and wider linear range. The high sensitivity of the method allowed its successful application to the analysis of PXT in spiked human plasma. The proposed method is practical and valuable for its routine application in quality control and clinical laboratories for analysis of PXT.

Colorimetric Determination of Certain Phenothiazine Drugs by Using Morpholine and Iodine-Potassium Iodide Reagents

1986 ◽  
Vol 69 (3) ◽  
pp. 513-518 ◽  
Author(s):  
Adel F Youssef ◽  
Salwa R El-Shabouri ◽  
Fardous A Mohamed ◽  
Abdel Maboud I Rageh
Keyword(s):  
Potassium Iodide ◽  
Quantitative Estimation ◽  
Colorimetric Method ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Colorimetric Determination ◽  
Reaction Products ◽  
Phenothiazine Drugs ◽  
Lower Molar

Abstract A colorimetric method was developed for the quantitative estimation of 11 phenothiazine drugs. The method is based on the interaction of unsulfoxidized drug with morpholine and iodine-potassium iodide reagents. The interaction for all studied phenothiazine drugs yields a blue product with 2 absorption maxima: one in the range of 620-640 nm with lower molar absorptivity and the other in the range of 662-690 nm with higher molar absorptivity. The color was stable for at least 10 h. The reproducibility and recovery of the method were excellent. The method was applied successfully to the analysis of various commercially available phenothiazines in different dosage forms. The results were comparable to those obtained by official procedures. The suitability of the method for detection and estimation of promethazine excreted in urine has been suggested by preliminary experiments. Reaction products have been isolated and identified.

Sign in / Sign up

Export Citation Format

Share Document