Pure Graphene Oxide Vertical p–n Junction with Remarkable Rectification Effect

Graphene p-n junctions have important applications in the fields of optical interconnection and low–power integrated circuits. Most current research is based on the lateral p-n junction prepared by chemical doping and other methods. Here, we report a new type of pure graphene oxide (pGO) vertical p-n junctions which do not dope any other elements but only controls the oxygen content of GO. The I–V curve of the pGO vertical p–n junction demonstrates a remarkable rectification effect. In addition, the pGO vertical p–n junction shows stability of its rectification characteristic over long-term storage for six months when sealed and stored in a PE bag. Moreover, the pGO vertical p–n junctions have obvious photoelectric response and various rectification effects with different thicknesses and an oxygen content of GO, humidity, and temperature. Hall effect test results show that rGO is an n–type semiconductor; theoretical calculations and research show that GO is generally a p–type semiconductor with a bandgap, thereby forming a p–n junction. Our work provides a method for preparing undoped GO vertical p–n junctions with advantages such as simplicity, convenience, and large–scale industrial preparation. Our work demonstrates great potential for application in electronics and highly sensitive sensors.

Nonadiabatic nonlinear optics and quantum geometry — Application to the twisted Schwinger effect

We study the tunneling mechanism of nonlinear optical processes in solids induced by strong coherent laser fields. The theory is based on an extension of the Landau-Zener model with nonadiabatic geometric effects. In addition to the rectification effect known previously, we find two effects, namely perfect tunneling and counterdiabaticity at fast sweep speed. We apply this theory to the twisted Schwinger effect, i.e., nonadiabatic pair production of particles by rotating electric fields, and find a nonperturbative generation mechanism of the opto-valley polarization and photo-current in Dirac and Weyl fermions.

Noise Reduction Analysis of Electronic Device Cooling Fan with Duct and Its Application Under Variable Working Conditions

A noise reduction method for axial flow fans using a short inlet duct is proposed. The pattern of noise reduction imposed by the short inlet duct on the axial flow cooling fan under variable working conditions was experimentally and numerically examined. A 2-cm inlet duct was found to reduce tonal noise. As the tip Mach number of the fan increased from 0.049 to 0.156, the reduction in the total average sound pressure level at 1 m from the fan increased from 0.8 dB(A) to 4.3 dB(A), and further achieved 4.8 dB(A) when a 1-cm inlet duct was used. The steady CFD showed that the inlet duct has little effect on the aerodynamic performance of the fan. The results of the unsteady calculation showed that the suction vortexes move upstream to weaken the interaction with the rotor blades, which significantly reduces the pulsating pressure on the blades. The SPL at the BPF contributed by the thrust force was calculated to reduce by 36 dB at a 135° observer angle, reflecting the rectification effect of the duct on the non-uniform inlet flow. The POD of the static pressure field on the blades verified that the main spatial mode is more uniformly distributed due to the duct, and energy owing to the rotor-inlet interaction decreases. A speed regulation strategy for the cooling fan with short inlet duct is proposed, which provides guidance for the application of this noise reduction method.

Effect of Inter-System Coupling on Heat Transport in a Microscopic Collision Model

In this paper we consider a bipartite system composed of two subsystems each coupled to its own thermal environment. Based on a collision model, we mainly study whether the approximation (i.e., the inter-system coupling is ignored when modeling the system–environment interaction) is valid or not. We also address the problem of heat transport unitedly for both excitation-conserving system–environment interactions and non-excitation-conserving system–environment interactions. For the former interaction, as the inter-system interaction strength increases, at first this approximation gets worse as expected, but then counter-intuitively gets better even for a stronger inter-system coupling. For the latter interaction with asymmetry, this approximation gets progressively worse. In this case we realize a perfect thermal rectification, and we cannot find an apparent rectification effect for the former interaction. Finally and more importantly, our results show that whether this approximation is valid or not is closely related to the quantum correlations between the subsystems, i.e., the weaker the quantum correlations, the more justified the approximation and vice versa.

Optimal Design of Diversion Piers of Lateral Intake Pumping Station Based on Orthogonal Test

To explore the rectification parameters of the diversion piers optimized for the forebay of the pump station with a lateral angle of 45°, the orthogonal experiment and computational fluid dynamics methods are used to analyze the flow characteristics of the diversion piers under different parameter combinations. The flow pattern in the forebay of the side water inlet is improved. The rectification effect of the diversion piers under 16 schemes is analyzed, considering the length, width, radian, and relative height of the diversion piers. Combined with numerical simulation, a better rectification scheme is provided, and finally, a reasonable range of values for the rectification parameters of the forebay diversion pier of the side 45° bend angle pump station is obtained.

Numerical Analysis of the Activated Combustion High-Velocity Air-Fuel Spraying Process: A Three-Dimensional Simulation with Improved Gas Mixing and Combustion Mode

Owing to its low flame temperature and high airflow velocity, the activated combustion high-velocity air-fuel (AC-HVAF) spraying process has garnered considerable attention in recent years. Analyzing the velocity field, temperature field, and composition of AC-HVAF spray coatings plays a vital role in improving the quality of coatings. In this study, an actual spray gun is adopted as a prototype, and the radial air inlets are introduced to improve the reaction efficiency so that the chemical reaction can be completed in the combustion chamber. Furthermore, a complete three-dimensional (3D) model is established to examine the effects of radial inlets and porous ceramic sheet on the combustion and flow fields. The hexahedral cells are used to discretize the entire model for reducing the influence of false-diffusion on the calculation results. The gas flow field is simulated by the commercial Fluent software, and the results indicate that the porous ceramic sheet effectively reduces the turbulent dissipation of the airflow with a good rectification effect (the ceramic sheet ensures a consistent airflow direction). The radial inlets and the porous ceramic sheet promote the formation of vortex in the combustion chamber, increase the residence time and stroke of the gas in the combustion chamber, and improve the probability of chemical reactions. In addition, it is observed that the stability of velocity for the airflow is strongly related to the airflow density.