Highly Sensitive, Non-cryogenic NIR High-resolution Spectrograph, WINERED

WINERED is a novel near-infrared (NIR) high-resolution spectrograph (HRS) that pursues the highest possible sensitivity to realize high-precision spectroscopy in the NIR as in the optical wavelength range. WINERED covers 0.9–1.35 μm (z, Y, and J-bands) with three modes (Wide mode and two Hires modes) at the maximum spectral resolutions of R = 28,000 and R = 70,000. For fulfilling the objective, WINERED is designed with an unprecedentedly high instrument throughput (up to 50% at maximum including the quantum efficiency of the array) that is three times or more than other existing optical/NIR HRSs. This is mainly realized by a combination of non-white pupil and no fiber-fed configuration in optical design, the moderate (optimized) wavelength coverage, and the high-throughput gratings. Another prominent feature of WINERED is “warm” instrument despite for infrared (IR) observations. Such non-cryogenic (no cold stop) IR instrument finally became possible with the combination of custom-made thermal-cut filter of 10−8 class, 1.7 μm cutoff HAWAII-2RG array, and a cold baffle reducing the direct thermal radiation to the IR array into the solid angle of f/2. The thermal background is suppressed below 0.1 photons pixel−1 s−1 even in the wide band of 0.9–1.35 μm under the environment of 290 K. WINERED had been installed to the 3.58 m New Technology Telescope at La Silla Observatory, ESO, since 2017. Even with the intermediate size telescope, WINERED was confirmed to provide a limiting magnitude (for SNR = 30 with 8 hr. integration time) of J = 16.4 mag for the Wide mode and J = 15.1 mag for the Hires mode, respectively, under the natural seeing conditions. These sensitivities are comparable to those for the existing NIR-HRSs attached to the 8–10 m class telescopes with AO. WINERED type spectrographs may become a critical not only for the currently on-going extremely large telescopes to reduce the developing cost and time but also for smaller telescopes to extend their lives with long programs.

Hypercubes of AGN Tori (HYPERCAT). II. Resolving the Torus with Extremely Large Telescopes

Recent infrared interferometric observations revealed sub-parsec scale dust distributions around active galactic nuclei (AGNs). Using images of Clumpy torus models and NGC 1068 as an example, we demonstrate that the near- and mid-infrared nuclear emission of some nearby AGNs will be resolvable in direct imaging with the next generation of 30 m telescopes, potentially breaking degeneracies from previous studies that used integrated spectral energy distributions of unresolved AGN tori. To that effect we model wavelength-dependent point spread functions from the pupil images of various telescopes: James Webb Space Telescope, Keck, Giant Magellan Telescope, Thirty Meter Telescope, and Extremely Large Telescope. We take into account detector pixel scales and noise, and apply deconvolution techniques for image recovery. We also model 2D maps of the 10 μm silicate feature strength, S 10, of NGC 1068 and compare with observations. When the torus is resolved, we find S 10 variations across the image. However, to reproduce the S 10 measurements of an unresolved torus a dusty screen of A V > 9 mag is required. We also fit the first resolved image of the K-band emission in NGC 1068 recently published by the GRAVITY Collaboration, deriving likely model parameters of the underlying dust distribution. We find that both (1) an elongated structure suggestive of a highly inclined emission ring, and (2) a geometrically thin but optically thick flared disk where the emission arises from a narrow strip of hot cloud surface layers on the far inner side of the torus funnel, can explain the observations.

A New Type of Atmospheric Dispersion Corrector Suitable for Wide-Field High-Resolution Imaging and Spectroscopy on Large Telescopes

Atmospheric dispersion produces spectral elongation in images formed by land-based astronomical telescopes, and this elongation increases as the telescope points away from the zenith. Atmospheric Dispersion Correctors (ADCs) produce compensating dispersion that can be adjusted to best cancel out the atmospheric effect. These correctors are generally of two basic types: Rotating Atmospheric Dispersion Correctors (R-ADCs), and Linear Atmospheric Dispersion Correctors (L-ADCs). Lately, a third type, the “Compensating Lateral ADC” (CL-ADC) has been proposed. None of these design approaches allow for large corrector systems (with elements greater than 1 m in diameter), in which the secondary spectrum is corrected to small residuals, of the order of tens’ of milliarcseconds. This paper describes a new type of large corrector (>1 m diameter elements), which can achieve the correction of the secondary spectrum to the order of 10 milliarcseconds. This correction is achieved by combining the R-ADC and CL-ADC approaches to dispersion correction. Only glass types readily available in metre diameters are required.

Lightweight cylindrical composite shell structures to support optical instruments in extremely large telescopes: A case study

Aiming at the issues of heavy weight and insufficient structural performance of optical instrument supporting structures in extremely large telescopes, the Wide-Field Optical Spectrograph (WFOS) of the Thirty Meter Telescope (TMT) was taken as a case to study. In order to develop lightweight structures which satisfies the design requirements for mass and stiffness, a design scheme of cylindrical composite shells supporting structure was proposed and their finite element models were developed. A size optimisation and a ply sequence optimisation of the composite structure were carried out. The structures before and after optimisation were evaluated from the aspects of mass, displacement, failure index and fundamental frequency. After the optimised design, the mass of the optimised WFOS cylindrical composite shell structure is reduced to approximately 50%, but its maximum displacement (0.513 mm) and fundamental frequency (8.275 Hz) are nearly unchanged. The study indicates that a cylindrical composite shell structure is an efficient structural form for large optical instruments.

Disturbance Modelling for Minimum Variance Control in Adaptive Optics Systems Using Wavefront Sensor Sampled-Data

Modern large telescopes are built based on the effectiveness of adaptive optics systems in mitigating the detrimental effects of wavefront distortions on astronomical images. In astronomical adaptive optics systems, the main sources of wavefront distortions are atmospheric turbulence and mechanical vibrations that are induced by the wind or the instrumentation systems, such as fans and cooling pumps. The mitigation of wavefront distortions is typically attained via a control law that is based on an adequate and accurate model. In this paper, we develop a modelling technique based on continuous-time damped-oscillators and on the Whittle’s likelihood method to estimate the parameters of disturbance models from wavefront sensor time-domain sampled-data. On the other hand, when the model is not accurate, the performance of the minimum variance controller is affected. We show that our modelling and identification techniques not only allow for more accurate estimates, but also for better minimum variance control performance. We illustrate the benefits of our proposal via numerical simulations.

Synthetic RGB photometry of bright stars: definition of the standard photometric system and UCM library of spectrophotometric spectra

Although the use of RGB photometry has exploded in the last decades due to the advent of high-quality and inexpensive digital cameras equipped with Bayer-like color filter systems, there is surprisingly no catalogue of bright stars that can be used for calibration purposes. Since due to their excessive brightness, accurate enough spectrophotometric measurements of bright stars typically cannot be performed with modern large telescopes, we have employed historical 13-color medium-narrow-band photometric data, gathered with quite reliable photomultipliers, to fit the spectrum of 1346 bright stars using stellar atmosphere models. This not only constitutes a useful compilation of bright spectrophotometric standards well spread in the celestial sphere, the UCM library of spectrophotometric spectra, but allows the generation of a catalogue of reference RGB magnitudes, with typical random uncertainties ∼0.01 mag. For that purpose, we have defined a new set of spectral sensitivity curves, computed as the median of 28 sets of empirical sensitivity curves from the literature, that can be used to establish a standard RGB photometric system. Conversions between RGB magnitudes computed with any of these sets of empirical RGB curves and those determined with the new standard photometric system are provided. Even though particular RGB measurements from single cameras are not expected to provide extremely accurate photometric data, the repeatability and multiplicity of observations will allow access to a large amount of exploitable data in many astronomical fields, such as the detailed monitoring of light pollution and its impact on the night sky brightness, or the study of meteors, solar system bodies, variable stars, and transient objects. In addition, the RGB magnitudes presented here make the sky an accessible and free laboratory for the calibration of the cameras themselves.

Light-Filtering Ring and Novel Telescope: Super Eyes for Deep Space

Exploring the universe has been a dream of mankind since ancient times, and observation with a telescope is among the most economical way. However, using current large telescopes is far away from being “economical”, and their observation capabilities are limited. In this regard, this article puts forward a new principle of telescope, designs a sophisticated light combing system-Light-filtering Ring, and conceives a new type of telescope-Light-filtering 10 Telescope. Compared with current telescopes, Light-filtering Telescope has amazing observation ability and smaller size, which makes it naturally suitable for detecting dim cosmic targets in deep space. Once successfully used, it will greatly expand the horizons of astronomical observation and save tens of billions of dollars in the field.