Progress in researching the implosion of nested arrays of mixed composition and the generation of soft X-ray power pulse

The results of experiments on the study of plasma compression of nested wire arrays of mixed composition and the generation of powerful pulses of soft X-ray radiation (SXR), carried out on a powerful electrophysical facility Angara-5-1 at a current level of up to 3 MA, are presented. Based on the latest experimental data on the intensity of plasma formation of various substances m& (in μg/(cm2×ns)) [1] and on the features of the dynamics of plasma compression in nested arrays [2], a nested wire array design has been developed which makes it possible to obtain a high peak SXR power in comparison with the known designs of single and nested tungsten wire arrays. During the implosion of nested arrays of mixed composition, consisting of plastic fibers and tungsten wires, shorter and more powerful SXR pulses were obtained with a maximum peak power PSXRmax~10 TW with a FWHM duration of ~5 ns compared to the parameters of SXR pulses upon compression of single tungsten arrays: PSXRmax~5 TW and FWHM~10 ns. Thus, under the conditions of our experiments, we have shown the possibility of a twofold increase in the peak SXR power during compression of nested arrays by optimizing their design.

Net heterotrophy in High Arctic first-year and multi-year spring sea ice

The net productivity of sea ice is determined by the physical and geochemical characteristics of the ice–ocean system and the activity of organisms inhabiting the ice. Differences in habitat suitability between first-year and multi-year sea ice can affect the ice algal community composition and acclimation state, introducing considerable variability to primary production within each ice type. In this study, we characterized the biogeochemical variability between adjacent first-year and multi-year sea ice floes in the Lincoln Sea of the Canadian High Arctic, during the May 2018 Multidisciplinary Arctic Program—Last Ice sampling campaign. Combining measurements of transmitted irradiance from a remotely operated underwater vehicle with laboratory-based oxygen optode incubations, this work shows widespread heterotrophy (net oxygen uptake) in the bottom 10 cm of both ice types, particularly in thick multi-year ice (>2.4 m) and early morning of the 24-h day. Algal acclimation state and species composition varied between ice types despite similar net community production due to widespread light and nutrient limitation. The first-year ice algal community was increasingly dominated over spring by the potentially toxin-producing genus Pseudonitzschia that was acclimated to high and variable light conditions characteristic of a thinner ice habitat with mobile snow cover. In comparison, the multi-year ice harbored more shade-acclimated algae of mixed composition. This work highlights the potential for heterotrophy in sea ice habitats of the High Arctic, including first measurements of such O2-uptake in multi-year ice floes. Observed differences in photophysiology between algae of these sea ice types suggests that a shift toward higher light availability and a younger sea ice cover with climate change does not necessarily result in a more productive system. Instead, it may favor future sea ice algal communities of different species composition, with lower photosynthetic potential but greater resilience to stronger and more variable light conditions.

Validation of the infrared spectroscopy method for analysis of the composition of urine concretes

The aim of this study was to validate the method for analyzing the composition of calculus using infrared (IR) spectroscopy by studying model mixtures of salts. Study was made with an ALPHA-P IR Fourier spectrometer with OPUS software (Bruker, Germany). The samples of pure chemical salts manufactured by Sigma-Aldrich USA were used to validate the method. Salt mixtures were prepared in ratios of 10/90, 50/50 and 90/10. To assess the effect of the fraction size on the calculus component results, were used calculi of patients with urolithiasis. For each mixture were used 10 repeated measurements. Analysis of the composition of model salts showed that in the study of pure cystine salt CV(%) was 0,79%, calcium carbonate - 0,92%, sodium urate - 0,97%, calcium oxalate monohydrate - 4,94%, magnesium ammonium phosphate - 5,59%. And the most common components were analyzed in the composition of complex mixtures, including 90%, 50% and 10% of the investigated component. Calcium oxalate monohydrate has CV(%) 5.70% in mixture 9 part of it to one part of impurities, in mixture 50/50 - 21.57% and in 10/90 - 5.70%. For uric acid in 90/10 - 2.20%, in 50/50 - 10.09%, in 10/90 - 31.94%. For calcium carbonate in 90/10 - 9.02%, in 50/50 - 11.98%, in 10/90 - 24.70%. The dispersion analysis showed that the weighed portions of salts with a particle diameter of more than 0.8 mm provide reproducibility with a CV - 11.48%, with a diameter of 0.2-0.8 mm - 5.35%, and finally less than 0.1 mm - 2.28%. The accuracy of the method is high, but the reproducibility of the IR-spectroscopy method is relatively low in the analysis of stones of mixed composition, due to the greater error in the determination of impurities. Laboratories should pay special attention to optimizing sample preparation to ensure particle fineness less than 0.1 mm.

LIMBAH KAYU DAN KERTAS BEKAS UNTUK PULP KERTAS

His study aims to analyze the extent to which a mixture of wood waste and used newsprint can be used as raw material for making paper.This study used a completely randomized design with two replications. where the treatment given is a mixture composition between waste wood pulp and old newsprint pulp, each consisting of 0 : 100% (A), 30% 70% (B), 50% : 50% (C), 70% : 30% (D) and 100% : 0% (E) of oven-dry weight of pulp per sheet of paperThe physical properties of paper pulp tested in the form of tear index, tensile index, crack index and folding resistance significantly affect the composition of the mixture of wood waste and used newsprint.The value of tear index, tensile index and folding resistance tend to decrease with the increase in the percentage of used newsprint to the composition of the mixture, while the value of the crack index increases. Wood waste and used newsprint can be used as raw materials in pulp and paper manufacture, especially in the treatment of mixed composition C (50%:50%.)

Modified Nanodiamonds as a Means of Polymer Surface Functionalization. From Fouling Suppression to Biosensor Design

The development of different methods for tuning surface properties is currently of great interest. The presented work is devoted to the use of modified nanodiamonds to control the wetting and biological fouling of polymers using optical sensors as an example. We have shown that, depending on the type of modification and the amount of nanodiamonds, the surface of the same fluorinated polymer can have both bactericidal properties and, on the contrary, good adhesion to the biomaterial. The precise control of wetting and biofouling properties of the surface was achieved by the optimization of the modified nanodiamonds thermal anchoring conditions. In vitro and in vivo tests have shown that the fixation of amine functional groups leads to inhibition of biological activity, while the presence of a large number of polar groups of mixed composition (amide and acid chloride) promotes adhesion of the biomaterial and allows one to create a biosensor on-site. A comprehensive study made it possible to establish that in the first 5 days the observed biosensor response is provided by cells adhered to the surface due to the cell wall interaction. On the 7th day, the cells are fixed by means of the polysaccharide matrix, which provides much better retention on the surface and a noticeably greater response to substrate injections. Nevertheless, it is important to note that even 1.5 h of incubation is sufficient for the formation of the reliable bioreceptor on the surface with the modified nanodiamonds. The approach demonstrated in this work makes it possible to easily and quickly isolate the microbiome on the surface of the sensor and perform the necessary studies of its substrate specificity or resistance to toxic effects.

Heterogeneity in Lateral Distribution of Polycations at the Surface of Lipid Membrane: From the Experimental Data to the Theoretical Model

Natural and synthetic polycations of different kinds attract substantial attention due to an increasing number of their applications in the biomedical industry and in pharmacology. The key characteristic determining the effectiveness of the majority of these applications is the number of macromolecules adsorbed on the surface of biological cells or their lipid models. Their study is complicated by a possible heterogeneity of polymer layer adsorbed on the membrane. Experimental methods reflecting the structure of the layer include the electrokinetic measurements in liposome suspension and the boundary potential of planar bilayer lipid membranes (BLM) and lipid monolayers with a mixed composition of lipids and the ionic media. In the review, we systematically analyze the methods of experimental registration and theoretical description of the laterally heterogeneous structures in the polymer layer published in the literature and in our previous studies. In particular, we consider a model based on classical theory of the electrical double layer, used to analyze the available data of the electrokinetic measurements in liposome suspension with polylysines of varying molecular mass. This model suggests a few parameters related to the heterogeneity of the polymer layer and allows determining the conditions for its appearance at the membrane surface. A further development of this theoretical approach is discussed.

The paper-forming properties of hemp fire peroxide cellulose in combination with wood sulphate cellulose

Hemp fire (Cannabis sativa) was delignified with the reaction mix “acetic acid - hydrogen peroxide - sulfuric acid catalyst - water” under sulfuric acid concentration of 0.45%, liquid module of 6, and temperature of 85 ° C. The cellulose was ground to 34 … 36°SHR and mixed in different ratios in compliance with the simplex-centroid experimental design with bleached sulfate softwood and hardwood pulp. The influence of the mixed composition formulations on the main strength properties of paper castings has been studied. It has been concluded that technical cellulose obtained from hemp fire applying this method, can be used for paper products manufacturing in combination with sulphate cellulose from coniferous and deciduous wood.

The Role of Mesoscale Plasma Sheet Dynamics in Ring Current Formation

During geomagnetically active periods ions are transported from the magnetotail into the inner magnetosphere and accelerated to energies of tens to hundreds of keV. These energetic ions, of mixed composition with the most important species being H+ and O+, become the dominant source of plasma pressure in the inner magnetosphere. Ion transport and acceleration can occur at different spatial and temporal scales ranging from global quasi-steady convection to localized impulsive injection events and may depend on the ion gyroradius. In this study we ascertain the relative importance of mesoscale flow structures and the effects of ion non-adiabaticity on the produced ring current. For this we use: global magnetohydrodynamic (MHD) simulations to generate self-consistent electromagnetic fields under typical driving conditions which exhibit bursty bulk flows (BBFs); and injected test particles, initialized to match the plasma moments of the MHD simulation, and subsequently evolved according to the kinetic equations of motion. We show that the BBFs produced by our simulation reproduce thermodynamic and magnetic statistics from in situ measurements and are numerically robust. Mining the simulation data we create a data set, over a billion points, connecting particle transport to characteristics of the MHD flow. From this we show that mesoscale bubbles, localized depleted entropy regions, and particle gradient drifts are critical for ion transport. Finally we show, using identical particle ensembles with varying mass, that O+ non-adiabaticity creates qualitative differences in energization and spatial distribution while H+ non-adiabaticity has non-negligible implications for loss timescales.

Features of the Multi-Criteria Optimization Mathematical Model of the Thermal and Electrical Loads Distribution at a Combined Heat and Power Plant with a Mixed Equipment Composition

The features of the mathematical model of multi-criteria optimization of the distribution of current thermal and electrical loads at a combined heat and power plant with a mixed composition of equipment based on traditional heating units and a heating CCGT are considered. The previously proposed mathematical apparatus for solving the problem of multi-criteria optimization at a thermal power plant is analyzed. It is shown that with a mixed composition of equipment, along with the criteria of efficiency and environmental friendliness, it is also necessary to take into account the factors of reliability and mobility (maneuverability). The substantiation of the choice of reliability and mobility criteria for optimizing the operation modes of a thermal power plant is given. Approaches to solving the multi-criteria task are considered. The description of the features of the algorithm for solving the optimization problem is given in relation to thermal power plants with a mixed composition of equipment, including heating turbines of the T type and PGU.