multilayered material
Recently Published Documents


TOTAL DOCUMENTS

24
(FIVE YEARS 2)

H-INDEX

8
(FIVE YEARS 0)

2021 ◽  
Vol 34 (4) ◽  
pp. 411-415
Author(s):  
Kazuki Tokumaru ◽  
Tsuyoshi Miyata ◽  
Fujio Tsumori


Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 725
Author(s):  
Johannes Wiener ◽  
Hannes Kaineder ◽  
Otmar Kolednik ◽  
Florian Arbeiter

Talcum reinforced polypropylene was enhanced with a soft type of polypropylene in order to increase the impact strength and damage tolerance of the material. The soft phase was incorporated in the form of continuous interlayers, where the numbers of layers ranged from 64 to 2048. A blend with the same material composition (based on wt% of the used materials) and the pure matrix material were investigated for comparison. A plateau in impact strength was reached by layered architectures, where the matrix layer thickness was as small or smaller than the largest talcum particles. The most promising layered architecture, namely, 512 layers, was subsequently investigated more thoroughly using instrumented Charpy experiments and tensile testing. In these tests, normalised parameters for stiffness and strength were obtained in addition to the impact strength. The multilayered material showed remarkable impact strength, fracture energy and damage tolerance. However, stiffness and strength were reduced due to the addition of the soft phase. It could be shown that specimens under bending loads are very compliant due to a stress-decoupling effect between layers that specifically reduces bending stiffness. This drawback could be avoided under tensile loading, while the increase in toughness remained high.



Author(s):  
Hironori Tohmyoh ◽  
Daiki Taniguchi

A bending test scheme for accurately determining the structural elasticity of human nails is reported. The structural elasticity expresses the deformability of a multilayered material for bending, and it is the flexural rigidity without depending on the external dimensions. The human nail samples used in this study were prepared from the free ends of the nails and are, therefore, curved, so the equation to determine the structural elasticity was derived from elastic, curved beam theory. The structural elasticity of the nail samples determined by the bending tests was found to be 2.19 GPa, and this value decreased by about 50% when nail polish was put on the nails. Lower value of the Young's modulus of the nail polish was found to cause decrease in the structural elasticity of the sample. Moreover, we also measured the structural elasticity of samples of hair prepared from the same person by the bending tests. Surprisingly, the structural elasticity of the hair (4.37 GPa) was found to be twice that of the nails.



2019 ◽  
Vol 17 (1) ◽  
pp. 95
Author(s):  
Michele Tricarico ◽  
Antonio Papangelo ◽  
Andrei Constantinescu ◽  
Michele Ciavarella

Adhesion is a key factor in many tribological processes, especially wear.  We generalize a recent formulation for the indentation of a multilayered material using an efficient integral transform method, to the case of adhesion, using a simple energetic transformation in the JKR regime. Then, we specialize the study for the geometry of the Surface Force Apparatus, which consists of two thin layers on a substrate, where the intermediate layer is softer than the other two. We find the pull-off force under "force control" (i.e. for "soft" loading systems), as well as under "displacement control" (i.e. for "rigid" systems), as a function of the geometrical thicknesses and material properties ratios, and the method is fully implemented in a fast Mathematica code, available to the public (see Appendix).



2018 ◽  
Vol 57 (6S1) ◽  
pp. 06HG05 ◽  
Author(s):  
Kazuhiro Yonekura ◽  
Kazuki Tokumaru ◽  
Fujio Tsumori




2015 ◽  
Vol 12 (102) ◽  
pp. 20140855 ◽  
Author(s):  
Sina Askarinejad ◽  
Nima Rahbar

Outstanding mechanical properties of biological multilayered materials are strongly influenced by nanoscale features in their structure. In this study, mechanical behaviour and toughening mechanisms of abalone nacre-inspired multilayered materials are explored. In nacre's structure, the organic matrix, pillars and the roughness of the aragonite platelets play important roles in its overall mechanical performance. A micromechanical model for multilayered biological materials is proposed to simulate their mechanical deformation and toughening mechanisms. The fundamental hypothesis of the model is the inclusion of nanoscale pillars with near theoretical strength ( σ th ~ E /30). It is also assumed that pillars and asperities confine the organic matrix to the proximity of the platelets, and, hence, increase their stiffness, since it has been previously shown that the organic matrix behaves more stiffly in the proximity of mineral platelets. The modelling results are in excellent agreement with the available experimental data for abalone nacre. The results demonstrate that the aragonite platelets, pillars and organic matrix synergistically affect the stiffness of nacre, and the pillars significantly contribute to the mechanical performance of nacre. It is also shown that the roughness induced interactions between the organic matrix and aragonite platelet, represented in the model by asperity elements, play a key role in strength and toughness of abalone nacre. The highly nonlinear behaviour of the proposed multilayered material is the result of distributed deformation in the nacre-like structure due to the existence of nano-asperities and nanopillars with near theoretical strength. Finally, tensile toughness is studied as a function of the components in the microstructure of nacre.



Author(s):  
Lilia Kurmanaeva ◽  
Hamed Bahmanpour ◽  
Troy Holland ◽  
Jonathan McCrea ◽  
Joon Hwan Lee ◽  
...  


Sign in / Sign up

Export Citation Format

Share Document