Biomedical PEVA Nanocomposite with Dual Clay Nanofiller: Cytotoxicity, Mechanical Properties, and Biostability

Poly(ethylene-vinyl acetate) (PEVA) nanocomposite incorporating dual clay nanofiller (DCN) of surface modified montmorillonite (S-MMT) and bentonite (Bent) was studied for biomedical applications. In order to overcome agglomeration of the DCN, the S-MMT and Bent were subjected to a physical treatment prior to being mixed with the copolymer to form nanocomposite material. The S-MMT and Bent were physically treated to become S-MMT(P) and Bent(pH-s), respectively, that could be more readily dispersed in the copolymer matrix due to increments in their basal spacing and loosening of their tactoid structure. The biocompatibility of both nanofillers was assessed through a fibroblast cell cytotoxicity assay. The mechanical properties of the neat PEVA, PEVA nanocomposites, and PEVA-DCN nanocomposites were evaluated using a tensile test for determining the best S-MMT(P):Bent(pH-s) ratio. The results were supported by morphological studies by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Biostability evaluation of the samples was conducted by comparing the ambient tensile test data with the in vitro tensile test data (after being immersed in simulated body fluid at 37 °C for 3 months). The results were supported by surface degradation analysis. Our results indicate that the cytotoxicity level of both nanofillers reduced upon the physical treatment process, making them safe to be used in low concentration as dual nanofillers in the PEVA-DCN nanocomposite. The results of tensile testing, SEM, and TEM proved that the ratio of 4:1 (S-MMT(P):Bent(pH-s)) provides a greater enhancement in the mechanical properties of the PEVA matrix. The biostability assessment indicated that the PEVA-DCN nanocomposite can achieve much better retention in tensile strength after being subjected to the simulated physiological fluid for 3 months with less surface degradation effect. These findings signify the potential of the S-MMT(P)/Bent(pH-s) as a reinforcing DCN, with simultaneous function as biostabilizing agent to the PEVA copolymer for implant application.

On Characteristics of Ferritic Steel Determined during the Uniaxial Tensile Test

Tensile uniaxial test is typically used to determine the strength and plasticity of a material. Nominal (engineering) stress-strain relationship is suitable for determining properties when elastic strain dominates (e.g., yield strength, Young’s modulus). For loading conditions where plastic deformation is significant (in front of a crack tip or in a neck), the use of true stress and strain values and the relationship between them are required. Under these conditions, the dependence between the true values of stresses and strains should be treated as a characteristic—a constitutive relationship of the material. This article presents several methodologies to develop a constitutive relationship for S355 steel from tensile test data. The constitutive relationship developed was incorporated into a finite element analysis of the tension test and verified with the measured tensile test data. The method of the constitutive relationship defining takes into account the impact of high plastic strain, the triaxiality stress factor, Lode coefficient, and material weakness due to the formation of microvoids, which leads to obtained correctly results by FEM (finite elements method) calculation. The different variants of constitutive relationships were applied to the FEM loading simulation of the three-point bending SENB (single edge notched bend) specimen to evaluate their applicability to the calculation of mechanical fields in the presence of a crack.

Design of Injection Mold from Plastic Material

This paper deals with the use of plastics for making injection molds. Mold production times reduced by 90% and costs cut by up to 75% are some of the benefits of prototype molds from plastic materials. Today, materials with melt temperatures above 300 °C are used for plastic molds. They include ABS, PE, PP and PA. In this study, testing of high-temperature resin from Formlabs was performed. Compression and tensile test data are compared with the datasheet values and with virtual simulations. The tests were carried out at different temperatures. Based on their results, one can identify a suitable molding process with molds from this material.

Influence of Aging Time on the Tensile Strenght of a Duplex Stainless Steel

This article was aimed at studying the influence of different aging times during the precipitation phase of the UNS S31803 (SAF 2205) duplex steel. To do so, all the test specimens were solution heat treated at 1050oC for 1 hour and quenched in water. After this step, the samples were aged at 850°C for periods of 10, 60 and 600 minutes and cooled in water. The aging heat treatments (TT) were performed in order to precipitate the sigma phase. Samples were subjected to microhardness and tensile tests so that the influence of the microstructural changes over the mechanical properties of the steel was assessed. Based on the microhardness and tensile test data, it was possible to verify a significant change over the mechanical properties of the UNS S31803 steel.

SYNTHESIS AND CHARACTERISATION OF ELECTROSPUN CHITOSAN MEMBRANES REINFORCED BY HALLOYSITE NANOTUBES

We report on the electrospinning method to synthesize and characterise chitosan membranes reinforced by halloysite nanotubes (HNTs). The synthesis process addressed two levels of HNTs concentration, i.e., 2 and 5 wt.%. Tensile testing was carried out to determine the strength (σ), strain (ε) at σ and elastic modulus (E) of the membranes. Tensile test data revealed that the membranes reinforced with 5 wt.% HNTs yielded the highest E (0.153 ± 0.02 GPa) and strength (22.53 ± 8.57 MPa). Electron micrographs of the fractured surfaces showed uniform dispersions of HNTs in the chitosan matrix. Infrared spectra indicated interactions between chitosan and inner and outer surfaces of HNTs. Thermogravimetric analysis demonstrated an increase in thermal stability with the addition of HNTs. Membranes immersed in simulated body fluid system for 28 days revealed the formation of dense apatite blocks with the addition of HNTs. Surface roughness increased with the addition of HNTs resulted a rise in degree of contact angle.