Numerical Study on Broadband Antireflection of Moth-Eye Nanostructured Polymer Film with Flexible Polyethylene Terephthalate Substrate

The application of moth-eye nanostructured polymer film on the flexible polyethylene terephthalate (PET) substrate is an effective way to improve its antireflection (AR) performance. However, many factors affect the AR properties of the moth-eye structure in the actual manufacturing process. Moreover, the antireflection research based on PET substrate has been relatively lacking compared with the silicon substrate. In this paper, we simulate and analyze the AR performance of the moth-eye nanostructured polymer film on PET substrate by using the finite-difference time-domain method within the wavelength range of 400–1100 nm. Simulation results show that the parabola-shaped moth-eye structure (PSMS) can suppress the Fresnel reflection significantly. Moreover, the height and filling ratios are the dominant factors that affect the AR performance of PSMS. Additionally, the base diameter, residual layer thickness, and the refractive index of PSMS polymer film also affect the reflectivity of PET slightly. As a result, an optimal PSMS with base diameter of 400 nm, height of 300 nm, and the hexagonal close-packed arrangement is appropriate, and the solar-weighted reflectivity of PET can be suppressed to 0.21%, which shows a prominent advantage over the bare PET (≈6%). Therefore, this research has promising potential for improving the optical performance of optoelectronic devices by using nanostructured polymer materials.

Exclusive and ultrasensitive detection of formaldehyde at room temperature using a flexible and monolithic chemiresistive sensor

Formaldehyde, a probable carcinogen, is a ubiquitous indoor pollutant, but its highly selective detection has been a long-standing challenge. Herein, a chemiresistive sensor that can detect ppb-level formaldehyde in an exclusive manner at room temperature is designed. The TiO2 sensor exhibits under UV illumination highly selective detection of formaldehyde and ethanol with negligible cross-responses to other indoor pollutants. The coating of a mixed matrix membrane (MMM) composed of zeolitic imidazole framework (ZIF-7) nanoparticles and polymers on TiO2 sensing films removed ethanol interference completely by molecular sieving, enabling an ultrahigh selectivity (response ratio > 50) and response (resistance ratio > 1,100) to 5 ppm formaldehyde at room temperature. Furthermore, a monolithic and flexible sensor is fabricated successfully using a TiO2 film sandwiched between a flexible polyethylene terephthalate substrate and MMM overlayer. Our work provides a strategy to achieve exclusive selectivity and high response to formaldehyde, demonstrating the promising potential of flexible gas sensors for indoor air monitoring.

Fabrication and characterization of flexible hybrid transparent electrodes with broadband transparency

In this study, indium-zinc oxide (IZO)/silver (Ag)/IZO (ZAZ) flexible transparent electrodes were prepared on polyethylene terephthalate substrate using radio frequency sputtering technique. Experimental results showed that when the Ag film transited from semi-continuous state to continuous state, the ZAZ electrode exhibited high optoelectronic performance. The best ZAZ sample had a quite wide range of high transmittance and an average transmittance of 78.9% in visible light region, and sheet resistance of [Formula: see text]/sq and a Haacke Index of [Formula: see text]. The bending test revealed that the [Formula: see text] (change in sheet resistance) of ZAZ electrodes after 1000 bends was still less than 25% while the electrical properties of IZO films deteriorated after only 100 bending tests.

Epitaxial Lift-Off of Flexible GaN-Based HEMT Arrays with Performances Optimization by the Piezotronic Effect

High-electron-mobility transistors (HEMTs) are a promising device in the field of radio frequency and wireless communication. However, to unlock the full potential of HEMTs, the fabrication of large-size flexible HEMTs is required. Herein, a large-sized (> 2 cm2) of AlGaN/AlN/GaN heterostructure-based HEMTs were successfully stripped from sapphire substrate to a flexible polyethylene terephthalate substrate by an electrochemical lift-off technique. The piezotronic effect was then induced to optimize the electron transport performance by modulating/tuning the physical properties of two-dimensional electron gas (2DEG) and phonons. The saturation current of the flexible HEMT is enhanced by 3.15% under the 0.547% tensile condition, and the thermal degradation of the HEMT was also obviously suppressed under compressive straining. The corresponding electrical performance changes and energy diagrams systematically illustrate the intrinsic mechanism. This work not only provides in-depth understanding of the piezotronic effect in tuning 2DEG and phonon properties in GaN HEMTs, but also demonstrates a low-cost method to optimize its electronic and thermal properties.

Tailoring the Seebeck Coefficient of Spray-Coated Poly(3,4-ethylenedioxythiophene): Poly(styrenesulfonate) Films with Nitrogen Doped Multiwalled Carbon Nanotubes

The thermoelectric properties of flexible thin films fabricated from two commercial poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) formulations filled with multiwalled carbon nanotubes (MWCNT) and nitrogen-doped MWCNT (N-MWCNT) were investigated. A simple spray-coating method for the fabrication of such flexible films on a polyethylene terephthalate substrate was developed. While increasing the MWCNT concentration had little effect on the thermoelectric properties, increasing the N-MWCNT concentration resulted in the emergence of an overall n-type semiconducting behavior and, thereby, tailoring the Seebeck coefficient of the composite films from p-type to n-type was shown. The Seebeck coefficient of the two PEDOT:PSS formulation films was inverted from 4.1 to −13.3 μV/K and from 12.5 to −10.9 μV/K respectively, with increasing N-MWCNT concentration from 0 to 95 wt.%. The importance of these results for future work stems from the possibility of tailoring the behavior of a typical p-type polymer such as PEDOT:PSS and the effect that the polymer conductive grade has on the switching concentration.