Molecular Mechanisms Driving the In Vivo Development of KPC-71-Mediated Resistance to Ceftazidime-Avibactam during Treatment of Carbapenem-Resistant Klebsiella pneumoniae Infections

In this study, we report an ST11-type clinical CRKP isolate that produces KPC-71, a novel plasmid backbone KPC variant that confers the development of CZA resistance during treatment. Furthermore, we reveal that resistance to CZA is mediated by the 182S insertion mutation in the KPC enzyme, which increases ceftazidime affinity and decreases avibactam inhibition.

GREPore-seq: A Robust Workflow to Detect Changes after Gene Editing through Long-range PCR and Nanopore Sequencing

To achieve the enormous potential of gene-editing technology in clinical therapies, both the on-target and unintended editing consequences need to be thoroughly evaluated. However, there is a lack of a comprehensive, pipelined, large-scale and economical workflow for detecting genome editing outcomes, in particular insertion or deletion of a large fragment. Here, we describe an approach for efficient and accurate detection of multiple genetic changes after CRISPR-Cas9 editing by pooled nanopore sequencing of barcoded long-range PCR products. To overcome the high error rates and indels of nanopore sequencing, we developed a pipeline to capture the barcoded sequences by grepping reads of nanopore amplicon sequencing (GREPore-seq). GREPore-seq can detect NHEJ-mediated double-stranded oligodeoxynucleotide (dsODN) insertions with comparable accuracy to Illumina next-generation sequencing (NGS). GREPore-seq also identifies HDR-mediated large gene knock-in, which excellently correlates with FACS analysis data. Low-level plasmid backbone insertion after HDR editing was also detected. We have established a practical workflow to identify genetic changes, including quantifying dsODN insertions, knock-ins, plasmid backbone insertions, and large fragment deletions after CRISPR editing. This toolkit for nanopore sequencing of pooled long amplicons should have broad applications in assessing on-target HDR editing and inadvertent large indels of over 1 kb. GREPore-seq is freely available at GitHub (https://github.com/lisiang/GREPore-seq).

Identification of the Plasmid-Mediated Colistin Resistance Gene mcr-1 in Escherichia coli Isolates From Migratory Birds in Guangdong, China

We determined the prevalence and transmission characteristics of mcr-1-positive Escherichia coli (MCRPEC) isolates from migratory birds Anser indicus in Guangdong, China. We identified 22 MCRPEC from 303 A. indicus fecal samples (7.3%) in Guangzhou, Zhaoqing, and Futian. The mcr-1 gene coexisted with 24 other types of antibiotic resistance genes (ARG), and 11 ARGs were highly prevalent at levels >50%. The MCRPEC displayed a diversity of sequence types (ST), and 19 distinct STs were identified with ST10, ST1146, and ST1147 as the most prevalent. In addition, these MCRPEC from birds were closely related phylogenetically to those from other sources in China. Whole-genome sequencing analysis demonstrated that mcr-1 was located on IncX4 (n=9, 40.9%), IncI2 (n=5, 22.7%) and IncP (n=1, 4.5%) plasmids and the latter shared an identical plasmid backbone with other sources. These results highlight the significance of migratory birds in the transmission of antibiotic resistance and provide powerful evidence that migratory birds are potential transmitters of antibiotic resistance.

Plasmidome of Listeria spp.—The repA-Family Business

Bacteria of the genus Listeria (phylum Firmicutes) include both human and animal pathogens, as well as saprophytic strains. A common component of Listeria spp. genomes are plasmids, i.e., extrachromosomal replicons that contribute to gene flux in bacteria. This study provides an in-depth insight into the structure, diversity and evolution of plasmids occurring in Listeria strains inhabiting various environments under different anthropogenic pressures. Apart from the components of the conserved plasmid backbone (providing replication, stable maintenance and conjugational transfer functions), these replicons contain numerous adaptive genes possibly involved in: (i) resistance to antibiotics, heavy metals, metalloids and sanitizers, and (ii) responses to heat, oxidative, acid and high salinity stressors. Their genomes are also enriched by numerous transposable elements, which have influenced the plasmid architecture. The plasmidome of Listeria is dominated by a group of related replicons encoding the RepA replication initiation protein. Detailed comparative analyses provide valuable data on the level of conservation of these replicons and their role in shaping the structure of the Listeria pangenome, as well as their relationship to plasmids of other genera of Firmicutes, which demonstrates the range and direction of flow of genetic information in this important group of bacteria.

Highly tunable TetR-dependent target gene expression in the acetic acid bacterium Gluconobacter oxydans

For the acetic acid bacterium (AAB) Gluconobacter oxydans only recently the first tight system for regulatable target gene expression became available based on the heterologous repressor-activator protein AraC from Escherichia coli and the target promoter ParaBAD. In this study, we tested pure repressor-based TetR- and LacI-dependent target gene expression in G. oxydans by applying the same plasmid backbone and construction principles that we have used successfully for the araC-ParaBAD system. When using a pBBR1MCS-5-based plasmid, the non-induced basal expression of the Tn10-based TetR-dependent expression system was extremely low. This allowed calculated induction ratios of up to more than 3500-fold with the fluorescence reporter protein mNeonGreen (mNG). The induction was highly homogeneous and tunable by varying the anhydrotetracycline concentration from 10 to 200 ng/mL. The already strong reporter gene expression could be doubled by inserting the ribosome binding site AGGAGA into the 3’ region of the Ptet sequence upstream from mNG. Alternative plasmid constructs used as controls revealed a strong influence of transcription terminators and antibiotics resistance gene of the plasmid backbone on the resulting expression performance. In contrast to the TetR-Ptet-system, pBBR1MCS-5-based LacI-dependent expression from PlacUV5 always exhibited some non-induced basal reporter expression and was therefore tunable only up to 40-fold induction by IPTG. The leakiness of PlacUV5 when not induced was independent of potential read-through from the lacI promoter. Protein-DNA binding simulations for pH 7, 6, 5, and 4 by computational modeling of LacI, TetR, and AraC with DNA suggested a decreased DNA binding of LacI when pH is below 6, the latter possibly causing the leakiness of LacI-dependent systems hitherto tested in AAB. In summary, the expression performance of the pBBR1MCS-5-based TetR-Ptet system makes this system highly suitable for applications in G. oxydans and possibly in other AAB. Key Points • A pBBR1MCS-5-based TetR-Ptet system was tunable up to more than 3500-fold induction. • A pBBR1MCS-5-based LacI-PlacUV5 system was leaky and tunable only up to 40-fold. • Modeling of protein-DNA binding suggested decreased DNA binding of LacI at pH < 6.

Emergence of IncHI2 Plasmid-Harboring blaNDM-5 from Porcine Escherichia coli Isolates in Guangdong, China

Carbapenem resistance has posed potential harmful risks to human and animals. The objectives of this study were to understand the prevalence of blaNDM-5 in pigs and investigate the molecular characteristics of NDM-5-producing Escherichia coli isolates in Guangdong province in China. Carbapenem-resistant E. coli isolates were isolated from pigs and obtained using MacConkey plates containing 0.5 mg/L meropenem. Conjugation assay and antimicrobial susceptibility testing were conducted for the isolates and their transconjugants. Whole-genome sequence (WGS) was used to analyze the plasmid genetic feature. A total of five blaNDM-5-carrying E. coli isolates were obtained in the present investigations. They belonged to five ST types. The blaNDM-5 genes were found to be in IncX3 and IncHI2 plasmid. The IncX3 plasmid was 46,161 bp in size and identical to other reports. IncHI2 plasmid was 246,593 bp in size and similar to other IncHI2-ST3 plasmids. It consisted of a typical IncHI2 plasmid backbone region and a multiresistance region (MRR). The blaNDM-5 was closely associated with the IS3000-ISAba125-blaNDM-5-bleMBL-trpF-tat-IS26 unit. We first reported the blaNDM-5-carrying IncHI2 in E. coli isolates recovered from pigs and revealed the molecular characterization. Continued surveillance for the dissemination of blaNDM-5 among food-producing animals is required.

UNIGEMS: plasmids and parts to facilitate teaching on assembly, gene expression control and logic in E. coli

Synthetic biology is as an excellent vehicle for education, as it enables creativecombination of engineering and molecular biology approaches for quantitative charac-terisations of the assembled constructs. However, there is a limited number of resourcesavailable for such applications in the educational context, where straightforward setup, easily measurable phenotypes and extensibility are of particular importance. To expandthe availability of education-friendly resources to teach synthetic biology and geneticengineering, we developed Unigems, a set of 10 plasmids that enable out-of-the-boxinvestigations of principles of gene expression control, as well as more complex designs- a biological logic gate. The system uses a common high-copy plasmid backbone anda common set of primers to enable Gibson-assembly of PCR-generated or synthesisedparts into a target vector. It currently has two reporter genes with either two consti-tutive (high- or low-level) or two inducible (lactose- or arabinose-) promoters, as wellas a single-plasmid implementation of an AND logic gate. The Unigems system hasalready been employed in undergraduate teaching settings, during outreach events andfor training of iGEM teams. All plasmids have been deposited in Addgene.

Application of transposon-insertion sequencing to determine gene essentiality in the acetogen Clostridium autoethanogenum

The majority of the genes present in bacterial genomes remain poorly characterised with up to one third of those that are protein encoding having no definitive function. Transposon insertion sequencing represents a high-throughput technique that can help rectify this deficiency. The technology, however, can only be realistically applied to easily transformable species leaving those with low DNA-transfer rates out of reach. Here we have developed a number of approaches that overcome this barrier in the autotrophic species Clostridium autoethanogenum using a mariner-based transposon system. The inherent instability of such systems in the Escherichia coli conjugation donor due to transposition events was counteracted through the incorporation of a conditionally lethal codA marker on the plasmid backbone. Relatively low frequencies of transformation of the plasmid into C. autoethanogenum were circumvented through the use of a plasmid that is conditional for replication coupled with the routine implementation of an Illumina library preparation protocol that eliminates plasmid-based reads. A transposon library was then used to determine the essential genes needed for growth using carbon monoxide as a sole carbon and energy source.

DNA templates with blocked long 3' end single-stranded overhangs (BL3SSO) promote bona fide Cas9-stimulated homology-directed repair of long transgenes into endogenous gene loci

Knock-in of large transgenes by Cas9-mediated homology-directed repair (HDR) is an extremely inefficient process. Although the use of single-stranded oligonucleotides (ssODN) as an HDR donor has improved the integration of smaller transgenes, they do not support efficient insertion of large DNA sequences. In an effort to gain insights into the mechanism(s) governing the HDR-mediated integration of larger transgenes and to improve the technology, we conducted knock-in experiments targeting the human EMX1 locus and applied rigorous genomic PCR analyses in the human HEK293 cell line. This exercise revealed an unexpected molecular complication arising from the transgene HDR being initiated at the single homology arm and the subsequent genomic integration of plasmid backbone sequences. To pivot around this problem, we devised a novel PCR-constructed template containing Blocked Long 3' Single-Stranded Overhangs (BL3SSO) that greatly improved the efficiency of bona fide Cas9-stimulated HDR at the EMX1 locus. We further refined BL3SSO technology and successfully used it to insert GFP transgenes into two important interferon-stimulated gene (ISG) loci, Viperin/RSAD2 and ISG15. This study demonstrates the utility of the BL3SSO platform for inserting long DNA sequences into both constitutive and inducible endogenous loci to generate novel human cell lines for the study of important biological processes.