Epitaxial Growth of High‐Quality AlGaInAs‐Based Active Structures on a Directly Bonded InP‐SiO 2 /Si Substrate

2019 ◽  
Vol 217 (3) ◽  
pp. 1900523 ◽  
Author(s):  
Claire Besancon ◽  
Nicolas Vaissiere ◽  
Cécilia Dupré ◽  
Frank Fournel ◽  
Loic Sanchez ◽  
...  
Author(s):  
M. Kostrzewa ◽  
P. Regreny ◽  
M.P. Besland ◽  
J.L. Leclercq ◽  
G. Grenet ◽  
...  

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 788
Author(s):  
Jian-Huan Wang ◽  
Ting Wang ◽  
Jian-Jun Zhang

Controllable growth of wafer-scale in-plane nanowires (NWs) is a prerequisite for achieving addressable and scalable NW-based quantum devices. Here, by introducing molecular beam epitaxy on patterned Si structures, we demonstrate the wafer-scale epitaxial growth of site-controlled in-plane Si, SiGe, and Ge/Si core/shell NW arrays on Si (001) substrate. The epitaxially grown Si, SiGe, and Ge/Si core/shell NW are highly homogeneous with well-defined facets. Suspended Si NWs with four {111} facets and a side width of about 25 nm are observed. Characterizations including high resolution transmission electron microscopy (HRTEM) confirm the high quality of these epitaxial NWs.


2005 ◽  
Vol 34 (1) ◽  
pp. 23-26 ◽  
Author(s):  
Edward Y. Chang ◽  
Tsung-Hsi Yang ◽  
Guangli Luo ◽  
Chun-Yen Chang

1999 ◽  
Vol 38 (Part 1, No. 12A) ◽  
pp. 6645-6649 ◽  
Author(s):  
Yasuhiro Fujimoto ◽  
Hiroo Yonezu ◽  
Satoshi Irino ◽  
Katsuya Samonji ◽  
Kenji Momose ◽  
...  

2021 ◽  
Vol 11 (4) ◽  
pp. 1801
Author(s):  
Takuro Fujii ◽  
Tatsurou Hiraki ◽  
Takuma Aihara ◽  
Hidetaka Nishi ◽  
Koji Takeda ◽  
...  

The rapid increase in total transmission capacity within and between data centers requires the construction of low-cost, high-capacity optical transmitters. Since a tremendous number of transmitters are required, photonic integrated circuits (PICs) using Si photonics technology enabling the integration of various functional devices on a single chip is a promising solution. A limitation of a Si-based PIC is the lack of an efficient light source due to the indirect bandgap of Si; therefore, hybrid integration technology of III-V semiconductor lasers on Si is desirable. The major challenges are that heterogeneous integration of III-V materials on Si induces the formation of dislocation at high process temperature; thus, the epitaxial regrowth process is difficult to apply. This paper reviews the evaluations conducted on our epitaxial growth technique using a directly bonded III-V membrane layer on a Si substrate. This technique enables epitaxial growth without the fundamental difficulties associated with lattice mismatch or anti-phase boundaries. In addition, crystal degradation correlating with the difference in thermal expansion is eliminated by keeping the total III-V layer thickness thinner than ~350 nm. As a result, various III-V photonic-device-fabrication technologies, such as buried regrowth, butt-joint regrowth, and selective area growth, can be applicable on the Si-photonics platform. We demonstrated the growth of indium-gallium-aluminum arsenide (InGaAlAs) multi-quantum wells (MQWs) and fabrication of lasers that exhibit >25 Gbit/s direct modulation with low energy cost. In addition, selective-area growth that enables the full O-band bandgap control of the MQW layer over the 150-nm range was demonstrated. We also fabricated indium-gallium-arsenide phosphide (InGaAsP) based phase modulators integrated with a distributed feedback laser. Therefore, the directly bonded III-V-on-Si substrate platform paves the way to manufacturing hybrid PICs for future data-center networks.


2006 ◽  
Vol 527-529 ◽  
pp. 299-302
Author(s):  
Hideki Shimizu ◽  
Yosuke Aoyama

3C-SiC films grown on carbonized Si (100) by plasma-assisted CVD have been investigated with systematic changes in flow rate of monosilane (SiH4) and propane (C3H8) as source gases. The deposition rate of the films increased monotonously and the microstructures of the films changed from 3C-SiC single crystal to 3C-SiC polycrystal with increasing flow rate of SiH4. Increasing C3H8 keeps single crystalline structure but results in contamination of α-W2C, which is a serious problem for the epitaxial growth. To obtain high quality 3C-SiC films, the effects of C3H8 on the microstructures of the films have been investigated by reducing the concentration of C3H8. Good quality 3C-SiC single crystal on Si (100) is grown at low net flow rate of C3H8 and SiH4, while 3C-SiC single crystal on Si (111) is grown at low net flow rate of C3H8 and high net flow rate of SiH4. It is expected that 3C-SiC epitaxial growth on Si (111) will take placed at a higher deposition rate and lower substrate temperature than that on Si (100).


Author(s):  
Kwang Hong Lee ◽  
Yiding Lin ◽  
Shuyu Bao ◽  
Li Zhang ◽  
Kenneth Lee ◽  
...  
Keyword(s):  

1989 ◽  
Vol 145 ◽  
Author(s):  
H. Temkin ◽  
L. R. Harriott ◽  
J. Weiner ◽  
R. A. Hamm ◽  
M. B. Panish

AbstractWe demonstrate a vacuum lithography process which uses a finely focused Ga ion beam to write the pattern which is then transferred to the InP pattern by low energy dry etching. Surface steps on the order of 1000-2000A in height, and lateral resolution limited only by size of the ion beam, can be efficiently prepared using moderate Ga ion fluences. The surfaces prepared by this process are damage free and suitable for epitaxial overgrowth. GaInAs/InP heterostructures grown on in-situ patterned substrates show excellent morphology and high luminescence efficiency.


2003 ◽  
Vol 93 (7) ◽  
pp. 3837-3843 ◽  
Author(s):  
Manoj Kumar ◽  
R. M. Mehra ◽  
A. Wakahara ◽  
M. Ishida ◽  
A. Yoshida

Sign in / Sign up

Export Citation Format

Share Document