P‐38: A Study on the Difference of Thermal Behavior by Crystallization Method

2021 ◽  
Vol 52 (1) ◽  
pp. 1204-1207
Author(s):  
Hyunsang Seo ◽  
Dongyeon Cho ◽  
Byulnim Park ◽  
Uiyoung Park ◽  
Doohyoung Lee ◽  
...  
RSC Advances ◽  
2021 ◽  
Vol 11 (53) ◽  
pp. 33522-33530
Author(s):  
Xinhua Zhao ◽  
Dan He ◽  
Xiaoping Ma ◽  
Xueying Liu ◽  
Zishuai Xu ◽  
...  

Spherical FOX-7 was produced via a combination of cooling crystallization method and repeated grinding technique, and the crystal morphology, size, structure, and thermal behavior were systematically investigated in detail.


2020 ◽  
Vol 11 ◽  
pp. e3350 ◽  
Author(s):  
Edwin Andres Villagran ◽  
Jorge Eliecer Jaramillo Noreña

In developing countries, horticultural production in low-altitude tropical climate conditions is often limited by biotic and abiotic factors. In these countries, the implementation of highly technical greenhouses is not feasible due to economic, social and cultural issues related to farmers. Therefore, one of the alternatives that has taken a great boom is the use of screen house structures (SH), although information on the microclimatic behavior of these is still limited. The objective of this research was to use an experimentally validated 3D CFD numerical simulation model to study the thermal behavior and airflow patterns in an SH located in the Colombian Caribbean region during the daytime hours (6:00 to18:00 h). The results obtained showed that the air flow patterns inside the SH showed speed reductions of up to 68% with respect to the speed of the external wind. It was also found that the thermal behavior inside the SH was quite homogeneous, the average temperature values in the structures ranged between 23.9 and 39 °C and the difference with external environment temperature did not exceed 1.8 °C. It was concluded that the implementation of this type of structure could be an useful technological tool for the optimization of horticultural production in low-altitude tropical climate regions.


SPE Journal ◽  
2021 ◽  
pp. 1-19
Author(s):  
L. Zhang ◽  
B. Wu ◽  
X. Zhang ◽  
Z. Zhang

Summary Accurate prediction of temperatures along a well during deep-sea drilling (DSD) is significant for wellbore stability analysis. In this paper, an analytical model is developed to study the thermal behavior around wellbore during DSD. The analytical solutions for temperatures in the tubing, annulus, and formation are obtained in Laplace space, and their values in time domains are obtained by the numerical Stehfest method. A sensitivity study of temperature distribution under different injection temperature and rate, seawater depth, and wellbore length is carried out, and a comparison is made for the thermal behavior between onshore drilling and DSD. It is found that injection rate plays a dominate role in the bottomhole temperature (BHT), which decreases by more than 40°C after 6 months when it varies from 2 to 20 kg/s. Injection temperature only affects the temperature along wellbore at a depth less than 2000 m. There is large difference in the temperatures along the wellbore between DSD and onshore drilling. The difference in the temperature at the depth of seabed and bottomhole between the two cases reaches 80 and 70°C, respectively, after 1 day. In addition, the analytical model can work as a benchmark for other models predicting the thermal behaviors during DSD.


2020 ◽  
Vol 9 (6) ◽  
pp. e46963471
Author(s):  
Julio César Barbosa Rocha ◽  
Daniel Barrera-Arellano

Sugarcane wax (SCW) was fractionated using hot ethanol and a simple washout system, the obtained fractions soluble (SSCW) and insoluble (ISCW) were used to produce organogels crystallized at two different temperatures (5 and 25°C) at the concentrations of 1, 2, 3 and 4% (w/w). The laboratory research evaluated the behavior of organgels obtained from sugarcane wax (and its fractions), all organogels were assessed due to its microstructure, thermal behavior, rheological behavior and mechanical resistance. Samples were visually assessed for stability at a controlled temperature oven (at 5, 25 and 35°C), and the thermal behavior for SCW, SSCW and ISCW were different. The enthalpy variation changed from 118.87 to 129.63 and 85.65 J/g for the fractions. Organogels obtained from these materials were somewhat similar during crystallization (TPeak of 42.83, 37.19 and 36.23°C respectively), crystallization and melting enthalpy variation presented hysteresis as observed for other waxy organogels. SSCW organogels were significantly harder than the obtained with SCW and ISCW. Micrographs of the organogels showed a more organized network present on SSCW organogel when compared with SCW that was more organized than ISCW organogels. The difference on the microstructure observed explains the difference on the mechanical behavior of organogels formed with sugarcane wax hot ethanol-soluble and insoluble fractions.


Energies ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 2146 ◽  
Author(s):  
Nourelhouda Boukaous ◽  
Lokmane Abdelouahed ◽  
Mustapha Chikhi ◽  
Abdeslam-Hassen Meniai ◽  
Chetna Mohabeer ◽  
...  

Thermogravimetric analysis was employed to investigate the combustion characteristics of flax shives, beech wood, hemicellulose, cellulose, lignin, and their chars. The chars were prepared from raw materials in a fixed-bed reactor at 850 °C. In this study, the thermal behavior based on characteristic temperatures (ignition, maximum, and final temperatures), burnout time and maximum rate was investigated. The kinetic parameters for the combustion of different materials were determined based on the Coats-Redfern approach. The results of our study revealed that the combustion of pure pseudo-components behaved differently from that of biomass. Indeed, principal component analysis showed that the thermal behavior of both biomasses was generally similar to that of pure hemicellulose. However, pure cellulose and lignin showed different behaviors compared to flax shives, beech wood, and hemicellulose. Hemicellulose and cellulose chars had almost the same behaviors, while being different from biomass and lignin chars. Despite the difference between flax shives and beech wood, they showed almost the same thermal characteristics and apparent activation energies. Also, the combustion of the hemicellulose and cellulose chars showed that they have almost the same structure. Their overall thermal and kinetic behavior remained between that of biomass and lignin.


2007 ◽  
Vol 124-126 ◽  
pp. 755-758
Author(s):  
Sung Tag Oh ◽  
Seung Hwa Yoo ◽  
Jae Kyo Jang ◽  
Chul Kyu Song ◽  
Yong Ho Choa ◽  
...  

Thermal behavior and microstructural characterization of the CNTs/Al2O3 nanocomposites with different relative densities were studied by TGA and SEM. The onset temperature for weight loss corresponded to a decomposition of CNTs in TGA increased with an increase of relative density. The activation energy for CNTs decomposition obtained by the Kissinger method increased with increasing relative density. The difference in thermal behavior was explained by the porosity effect on the oxidation and decomposition of CNTs.


2021 ◽  
Author(s):  
Xiujuan Shi ◽  
Jun Zhang ◽  
Junkai Liu ◽  
Xueqian Zhao ◽  
Haoran Wang ◽  
...  

Nature possesses a powerful ability to assemble multiple complex structures to fabricate hierarchical biological structures in a living-assembled way. However, it is still a huge challenge for artificial systems to fabricate and characterize hierarchical living assemblies with well-defined and controllable but complex structures. In this work, we proposed a new concept for the fabrication of multiblock fluorescent microcolumns, which relies on the cooperation between the controllable host–guest complexation based on cucurbit[8]uril (CB[8]) and the living assembly of nanotubular supramolecular polymers composed of CB[8] and NaBr in aqueous solution. By using the complexation of CB[8] with different guest numbers of luminogens with aggregation-induced emission (AIEgens) characteristics, and the difference in affinity between CB[8] and different types of AIEgens, the concentration-controlled and self-sorting-controlled sequential living assembly are realized, respectively. Correspondingly, multiblock fluorescent microcolumns with different fluorescence emission are fabricated, and the molecular structure of each fluorescent block is analyzed by single crystal X-ray diffraction measurement. In addition, the living assembly of multiblock fluorescent microcolumns is visualized, understood, and regulated with the aid of AIEgens. The method developed here is expected to be extended to more guest molecules of CB[8] and also provides a referential crystallization method for CB[8]-based complexes.


1962 ◽  
Vol 14 ◽  
pp. 149-155 ◽  
Author(s):  
E. L. Ruskol

The difference between average densities of the Moon and Earth was interpreted in the preceding report by Professor H. Urey as indicating a difference in their chemical composition. Therefore, Urey assumes the Moon's formation to have taken place far away from the Earth, under conditions differing substantially from the conditions of Earth's formation. In such a case, the Earth should have captured the Moon. As is admitted by Professor Urey himself, such a capture is a very improbable event. In addition, an assumption that the “lunar” dimensions were representative of protoplanetary bodies in the entire solar system encounters great difficulties.


1997 ◽  
Vol 161 ◽  
pp. 491-504 ◽  
Author(s):  
Frances Westall

AbstractThe oldest cell-like structures on Earth are preserved in silicified lagoonal, shallow sea or hydrothermal sediments, such as some Archean formations in Western Australia and South Africa. Previous studies concentrated on the search for organic fossils in Archean rocks. Observations of silicified bacteria (as silica minerals) are scarce for both the Precambrian and the Phanerozoic, but reports of mineral bacteria finds, in general, are increasing. The problems associated with the identification of authentic fossil bacteria and, if possible, closer identification of bacteria type can, in part, be overcome by experimental fossilisation studies. These have shown that not all bacteria fossilise in the same way and, indeed, some seem to be very resistent to fossilisation. This paper deals with a transmission electron microscope investigation of the silicification of four species of bacteria commonly found in the environment. The Gram positiveBacillus laterosporusand its spore produced a robust, durable crust upon silicification, whereas the Gram negativePseudomonas fluorescens, Ps. vesicularis, andPs. acidovoranspresented delicately preserved walls. The greater amount of peptidoglycan, containing abundant metal cation binding sites, in the cell wall of the Gram positive bacterium, probably accounts for the difference in the mode of fossilisation. The Gram positive bacteria are, therefore, probably most likely to be preserved in the terrestrial and extraterrestrial rock record.


1994 ◽  
Vol 144 ◽  
pp. 421-426
Author(s):  
N. F. Tyagun

AbstractThe interrelationship of half-widths and intensities for the red, green and yellow lines is considered. This is a direct relationship for the green and yellow line and an inverse one for the red line. The difference in the relationships of half-widths and intensities for different lines appears to be due to substantially dissimilar structuring and to a set of line-of-sight motions in ”hot“ and ”cold“ corona regions.When diagnosing the coronal plasma, one cannot neglect the filling factor - each line has such a factor of its own.


Sign in / Sign up

Export Citation Format

Share Document