Immobilization of Actinobacterial Cells: Sodium Alginate and Calcium Chloride Method

Author(s):  
Gopikrishnan Venugopal ◽  
Manigundan Kaari ◽  
Abirami Baskaran ◽  
Radhakrishnan Manikkam
Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1666
Author(s):  
Stefanos Hatzilazarou ◽  
Stefanos Kostas ◽  
Theodora Nendou ◽  
Athanasios Economou

The present study demonstrates the potential of the alginate encapsulation of shoot tips and nodal segments of Gardenia jasminoides Ellis, the short-term cold storage of artificial seeds and subsequent successful conversion to desirable, uniform and genetically stable plantlets. Shoot tips and first-node segments below them, derived from shoots of in vitro cultures, responded better than second-to-fourth-node segments on agar-solidified Murashige and Skoog (MS) nutrient medium and thus, they were used as explants for alginate encapsulation. Explant encapsulation in 2.5% sodium alginate in combination with 50 mM of calcium chloride resulted in the production of soft beads, while hardening in 100 mM of calcium chloride formed firm beads of uniform globular shape, suitable for handling. The addition of liquid MS nutrient medium in the sodium alginate solution doubled the subsequent germination response of the beads. The maintenance of alginate beads under light favored their germination response compared to maintenance in darkness. Encapsulated shoot tip explants of gardenia, which were stored at 4 °C for 4, 8 or 12 weeks, showed a gradual decline in their regeneration response (73.3, 68.9, 53.3%, respectively), whereas, non-encapsulated explants (naked), stored under the same time durations of cold conditions, exhibited a sharp decline in regeneration response up to entirely zeroing (48.9, 11.1, 0.0%, respectively). Shoots, derived from 12-week cold-stored encapsulated explants, were easily rooted in solid MS nutrient medium with the addition of 0.5 μM of Indole-3-acetic acid (IAA) and after transplantation of the rooted plantlets individually to pots containing a peat–perlite (3:1, v/v) substrate, they were successfully acclimatized in the greenhouse under the gradual reduction of 75 or 50% shading with survival rates of 95–100%. The genetic stability of the acclimatized plantlets was assessed and compared with the mother plant using inter simple sequence repeat (ISSR) markers. ISSR analysis confirmed that all regenerated plantlets were genetically identical to the mother plant. This procedure of artificial seed production could be useful for the short-term storage of germplasm and the production of genetically identical and stable plants as an alternative method of micropropagation in Gardenia jasminoides.


BioResources ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. 5780-5793
Author(s):  
Ji-Soo Park ◽  
Chan-Woo Park ◽  
Song-Yi Han ◽  
Eun-Ah Lee ◽  
Azelia Wulan Cindradewi ◽  
...  

Cellulose nanocrystals (CNCs) were wet-spun in a coagulation bath for the fabrication of microfilaments, and the effect of sodium alginate (AL) addition on the wet-spinnability and properties of the microcomposite filament was investigated. The CNC suspension exhibited excellent wet-spinnability in calcium chloride (CaCl2) solution, and the addition of AL in CNC suspension resulted in the enhancement of the wet-spinnability of CNCs. As the AL content increased from 3% to 10%, the average diameter of the microcomposite filament decreased, and its tensile properties deteriorated. The increased spinning rate caused an increase in the orientation index of CNCs, resulting in an improvement in the tensile properties of the microcomposite filament.


Author(s):  
Preethi G. B. ◽  
Prashanth Kunal

<p><strong>Objective: </strong>The current work was attempted to formulate and evaluate a controlled-release matrix-type ocular inserts containing a combination of brimonidine tartrate and timolol maleate, with a view to sustain the drug release in the cul-de-sac of the eye.<strong></strong></p><p><strong>Methods: </strong>Initially, the infrared studies were done to determine the drug–polymer interactions. Sodium alginate-loaded ocuserts were prepared by solvent casting technique. Varying the concentrations of polymer—sodium alginate, plasticizer—glycerine, and cross-linking agent—calcium chloride by keeping the drug concentration constant, made a total of nine formulations. These formulations were evaluated for its appearance, drug content, weight uniformity, thickness uniformity, percentage moisture loss, percentage moisture absorption, and <em>in vitro </em>release profile of the ocuserts. Finally, accelerated stability studies and the release kinetics were performed on the optimised formulation.<strong></strong></p><p><strong>Results: </strong>It was perceived that polymer, plasticizer, and calcium chloride had a significant influence on the drug release. The data obtained from the formulations showed that formulation—F9 was the optimised formulation, which exhibited better drug release. The release data of the optimised formulation tested on the kinetic models revealed that it exhibited first-order release kinetics. <strong></strong></p><p><strong>Conclusion: </strong>It can be concluded that a natural bioadhesive hydrophilic polymer such as sodium alginate can be used as a film former to load water soluble and hydrophilic drugs like brimonidine tartrate and timolol maleate. Among all formulations, F9 with 400 mg sodium alginate, 2% calcium chloride and 60 mg glycerin were found to be the most suitable insert in terms of appearance, ease of handling, thickness, <em>in vitro</em> drug release and stability.</p>


2015 ◽  
Vol 2 (1) ◽  
pp. 118-120
Author(s):  
Durgha H ◽  
Ramya G ◽  
Gogul Ramanth M ◽  
Thirugnanasampandan R

Young nodal explants (0.5-1cm) of Salvia sclarea L. was used for synthetic seed preparation.Synthetic seeds were prepared using 5% sodium alginate and 1.11% calcium chloride. Seed germination was observed on MS medium fortified with 1.4µM GA3+4.4µM BA after twenty days of culture. Further multiple shoot induction was observed after fifteen days of shootinduction.


2019 ◽  
Vol 8 (3) ◽  
pp. 584-596
Author(s):  
Radion Nykyforov ◽  
Yuriі Korenets ◽  
Natalya Frolova ◽  
Oleg Kuzmin

PeerJ ◽  
2020 ◽  
Vol 8 ◽  
pp. e10165
Author(s):  
Nucharee Juntarachot ◽  
Sasithorn Sirilun ◽  
Duangporn Kantachote ◽  
Phakkharawat Sittiprapaporn ◽  
Piyachat Tongpong ◽  
...  

Background The accumulation of plaque causes oral diseases. Dental plaque is formed on teeth surfaces by oral bacterial pathogens, particularly Streptococcus mutans, in the oral cavity. Dextranase is one of the enzymes involved in antiplaque accumulation as it can prevent dental caries by the degradation of dextran, which is a component of plaque biofilm. This led to the idea of creating toothpaste containing dextranase for preventing oral diseases. However, the dextranase enzyme must be stable in the product; therefore, encapsulation is an attractive way to increase the stability of this enzyme. Methods The activity of food-grade fungal dextranase was measured on the basis of increasing ratio of reducing sugar concentration, determined by the reaction with 3, 5-dinitrosalicylic acid reagent. The efficiency of the dextranase enzyme was investigated based on its minimal inhibitory concentration (MIC) against biofilm formation by S. mutans ATCC 25175. Box-Behnken design (BBD) was used to study the three factors affecting encapsulation: pH, calcium chloride concentration, and sodium alginate concentration. Encapsulation efficiency (% EE) and the activity of dextranase enzyme trapped in alginate beads were determined. Then, the encapsulated dextranase in alginate beads was added to toothpaste base, and the stability of the enzyme was examined. Finally, sensory test and safety evaluation of toothpaste containing encapsulated dextranase were done. Results The highest activity of the dextranase enzyme was 4401.71 unit/g at a pH of 6 and 37 °C. The dextranase at its MIC (4.5 unit/g) showed strong inhibition against the growth of S. mutans. This enzyme at 1/2 MIC also showed a remarkable decrease in biofilm formation by S. mutans. The most effective condition of dextranase encapsulation was at a pH of 7, 20% w/v calcium chloride and 0.85% w/v sodium alginate. Toothpaste containing encapsulated dextranase alginate beads produced under suitable condition was stable after 3 months of storage, while the sensory test of the product was accepted at level 3 (like slightly), and it was safe. Conclusion This research achieved an alternative health product for oral care by formulating toothpaste with dextranase encapsulated in effective alginate beads to act against cariogenic bacteria, like S. mutants, by preventing dental plaque.


Author(s):  
Salil Desai ◽  
Anthony Moore ◽  
Benjamin Harrison ◽  
Jagannathan Sankar

This paper focuses on understanding microdroplet formation of sodium alginate biopolymer at various concentrations utilizing drop-on-demand inkjet technology. We investigate the effect of sodium chloride on the rheology of sodium alginate and derive a correlation between the size of the droplet versus the size of the microcapsules formed. Varying sizes of microcapsules are formed based on different concentrations of calcium chloride solvent. This understanding will give insight for fabricating drug delivery capsules and tissue scaffolds that are subject to extreme ambient conditions when interfaced with in-vivo environments.


Pharmaceutics ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 628
Author(s):  
Inga Matulyte ◽  
Giedre Kasparaviciene ◽  
Jurga Bernatoniene

Essential oils are volatile liquids which evaporate and lose their pharmacological effect when exposed to the environment. The aim of this study is to protect nutmeg essential oil from environmental factors by encapsulation (shell material, sodium alginate) and determine the influence of crosslinker concentration (2%, 5% calcium chloride), different emulsifiers (polysorbate 80, sucrose esters), and magnesium aluminometasilicate on microcapsule physical parameters, encapsulation efficiency (EE), swelling index (SI), and other parameters. Nutmeg essential oil (NEO)-loaded calcium alginate microcapsules were prepared by extrusion. The swelling test was performed with and without enzymes in simulated gastric, intestinal, and gastrointestinal media. This study shows that the crosslinker concentration has a significant influence on EE, with 2% calcium chloride solution being more effective than 5%, and capsules being softer with 2% crosslinker solution. Using sucrose esters, EE is higher when polysorbate 80 is used. The swelling index is nearly three times higher in an intestinal medium without enzymes than in the medium with pancreatin. Microcapsule physical parameters depend on the excipients: the hardest capsules were obtained with the biggest amount of sodium alginate; the largest with magnesium aluminometasilicate. Sucrose esters and magnesium aluminometasilicate are new materials used in extrusion.


2020 ◽  
Vol 250 ◽  
pp. 116940
Author(s):  
Iñigo Díez-García ◽  
Monica Rosas de Costa Lemma ◽  
Hernane S. Barud ◽  
Arantxa Eceiza ◽  
Agnieszka Tercjak

Sign in / Sign up

Export Citation Format

Share Document