Spatial Adjusting of the Industrial Robot Program with Matrix Codes

2017 ◽  
pp. 521-531 ◽  
Author(s):  
Jakub Wojciechowski ◽  
Olaf Ciszak
Keyword(s):  
Industrial Robot ◽  
Matrix Codes

Design of spline surface vacuum gripper for pick and place robotic arms

2020 ◽  
Vol 4 (2) ◽  
pp. 48-55
Author(s):  
A. S. Jamaludin ◽  
M. N. M. Razali ◽  
N. Jasman ◽  
A. N. A. Ghafar ◽  
M. A. Hadi
Keyword(s):  
Cycle Time ◽  
Industrial Robot ◽  
Annealing Process ◽  
Vacuum Suction ◽  
Robotic Arms ◽  
Custom Made ◽  
Pick And Place ◽  
Manufacturing Procedure ◽  
Production Flexibility ◽  
The Impact

The gripper is the most important part in an industrial robot. It is related with the environment around the robot. Today, the industrial robot grippers have to be tuned and custom made for each application by engineers, by searching to get the desired repeatability and behaviour. Vacuum suction is one of the grippers in Watch Case Press Production (WCPP) and a mechanism to improve the efficiency of the manufacturing procedure. Pick and place are the important process for the annealing process. Thus, by implementing vacuum suction gripper, the process of pick and place can be improved. The purpose of vacuum gripper other than design vacuum suction mechanism is to compare the effectiveness of vacuum suction gripper with the conventional pick and place gripper. Vacuum suction gripper is a mechanism to transport part and which later sequencing, eliminating and reducing the activities required to complete the process. Throughout this study, the process pick and place became more effective, the impact on the production of annealing process is faster. The vacuum suction gripper can pick all part at the production which will lower the loss of the productivity. In conclusion, vacuum suction gripper reduces the cycle time about 20%. Vacuum suction gripper can help lower the cycle time of a machine and allow more frequent process in order to increase the production flexibility.

Motion Control of Industrial Robot by Considering Vibration Suppression and Fast Path Tracking

2010 ◽  
Vol 130 (3) ◽  
pp. 375-384
Author(s):  
Satoru Kumagai ◽  
Toshimasa Miyazaki ◽  
Kiyoshi Ohishi
Keyword(s):  
Motion Control ◽  
Vibration Suppression ◽  
Industrial Robot ◽  
Path Tracking

SAFETY AND RISK ASSESSMENT AT AUTOMATED WORKPLACE

2018 ◽  
pp. 78-84
Author(s):  
Marek Vagas
Keyword(s):  
Risk Assessment ◽  
Industrial Robot ◽  
Industrial Robots ◽  
Added Value ◽  
Growing Up ◽  
Target Setting ◽  
Clear View ◽  
General Safety

Urgency of the research. Automated workplaces are growing up in present, especially with implementation of industrial robots with feasibility of various dispositions, where safety and risk assessment is considered as most important issues. Target setting. The protection of workers must be at the first place, therefore safety and risk assessment at automated workplaces is most important problematic, which had presented in this article Actual scientific researches and issues analysis. Actual research is much more focused at standard workplaces without industrial robots. So, missing of information from the field of automated workplaces in connection with various dispositions can be considered as added value of article. Uninvestigated parts of general matters defining. Despite to lot of general safety instructions in this area, still is missed clear view only at automated workplace with industrial robots. The research objective. The aim of article is to provide general instructions directly from the field of automated workplaces The statement of basic materials. For success realization of automated workplace is good to have a helping hand and orientation requirements needed for risk assessment at the workplace. Conclusions. The results published in this article increase the awareness and information of such automated workplaces, together with industrial robots. In addition, presented general steps and requirements helps persons for better realization of these types of workplaces, where major role takes an industrial robot. Our proposed solution can be considered as relevant base for risk assessment such workplaces with safety fences or light barriers.

Metodología para el desarrollo de trayectorias en la aplicación por el proceso de soldadura GMAW en un robot industrial

2019 ◽  
pp. 1-4
Author(s):  
Josué Rafael Sánchez-Lerma ◽  
Luis Armando Torres-Rico ◽  
Héctor Huerta-Gámez ◽  
Ismael Ruiz-López
Keyword(s):  
Mechanical Properties ◽  
Automotive Industry ◽  
Industrial Robot ◽  
Welding Process ◽  
High Strength ◽  
Test Material ◽  
Advantages And Disadvantages ◽  
Application Characteristics ◽  
Joining Process ◽  
Gmaw Welding

This paper proposes the development of the methodology to be carried out for the metal joining process through the GMAW welding process in the Fanuc LR Mate 200iD industrial robot. The parameters or properties were considered for the application to be as efficient as possible, such parameters as speed of application, characteristics of the filler material, gas to be used as welding protection. The GMAW welding process can be applied semiautomatically using a hand gun, in which the electrode is fed by a coil, or an automatic form that includes automated equipment or robots. The advantages and disadvantages of the GMAW welding process applied in a manual and automated way were commented. The mechanical properties of the materials to which said welding can be applied were investigated; The materials with which this type of welding can be worked are the high strength materials, which are used in the automotive industry, for the forming of sheet metal. To know the properties of the material, destructive tests were carried out on the test material to be used, as well as the mechanical properties of the welding.

Online Calibration of Visual Measurement System Based on Industrial Robot

ROBOT ◽  
2011 ◽  
Vol 33 (3) ◽  
pp. 299-302 ◽  
Author(s):  
Yi WANG ◽  
Changjie LIU ◽  
Xueyou YANG ◽  
Shenghua YE
Keyword(s):  
Measurement System ◽  
Industrial Robot ◽  
Visual Measurement ◽  
Online Calibration

A Polishing Robot Force Control System Based on Time Series Data in Industrial Internet of Things

2021 ◽  
Vol 21 (2) ◽  
pp. 1-22
Author(s):  
Chen Zhang ◽  
Zhuo Tang ◽  
Kenli Li ◽  
Jianzhong Yang ◽  
Li Yang
Keyword(s):  
Time Series ◽  
Control System ◽  
Force Control ◽  
Time Series Data ◽  
Industrial Robot ◽  
Industrial Robots ◽  
Series Data ◽  
Industrial Internet Of Things ◽  
Industrial Internet ◽  
Force Control System

Installing a six-dimensional force/torque sensor on an industrial arm for force feedback is a common robotic force control strategy. However, because of the high price of force/torque sensors and the closedness of an industrial robot control system, this method is not convenient for industrial mass production applications. Various types of data generated by industrial robots during the polishing process can be saved, transmitted, and applied, benefiting from the growth of the industrial internet of things (IIoT). Therefore, we propose a constant force control system that combines an industrial robot control system and industrial robot offline programming software for a polishing robot based on IIoT time series data. The system mainly consists of four parts, which can achieve constant force polishing of industrial robots in mass production. (1) Data collection module. Install a six-dimensional force/torque sensor at a manipulator and collect the robot data (current series data, etc.) and sensor data (force/torque series data). (2) Data analysis module. Establish a relationship model based on variant long short-term memory which we propose between current time series data of the polishing manipulator and data of the force sensor. (3) Data prediction module. A large number of sensorless polishing robots of the same type can utilize that model to predict force time series. (4) Trajectory optimization module. The polishing trajectories can be adjusted according to the prediction sequences. The experiments verified that the relational model we proposed has an accurate prediction, small error, and a manipulator taking advantage of this method has a better polishing effect.

scholarly journals Virtual straightening of scraper conveyor based on the position and attitude solution of industrial robot model

2021 ◽  
Author(s):  
Suhua Li ◽  
Jiacheng Xie ◽  
Fang Ren ◽  
Xin Zhang ◽  
Xuewen Wang ◽  
...  
Keyword(s):  
Coal Seam ◽  
Industrial Robot ◽  
Steering Committee ◽  
High Accuracy ◽  
Simulation System ◽  
Direct Proportion ◽  
Hydraulic Support ◽  
Actual Distance ◽  
Scraper Conveyor ◽  
Comparison And Analysis

AbstractThe movement of the floating connecting mechanism between a hydraulic support and scraper conveyor is space movement; thus, when the hydraulic support pushes the scraper conveyor, there is an error between the actual distance of the scraper conveyor and the theoretical moving distance. As a result, the scraper conveyor cannot obtain the straightness requirement. Therefore, the movement law of the floating connecting mechanism between the hydraulic support and scraper conveyor is analyzed and programmed into the Unity3D to realize accurate pushing of the scraper conveyor via hydraulic support. The Coal Seam + Equipment Joint Virtual Straightening System is established, and a straightening method based on the motion law of a floating connection is proposed as the default method of the system. In addition, a straightening simulation of the scraper conveyor was performed on a complex coal seam floor, the results demonstrate that the average straightening error of the scraper conveyor is within 2–8 mm, and is in direct proportion to the fluctuation of the coal seam floor in the strike of the seam with high accuracy, the straightness of scraper conveyor is more affected by the subsidence terrain during straightening than by the bulge terrain. And some conclusions are verified by experiment. Based on the verification of the relevant conclusions, a comparison and analysis of Longwall Automation Steering Committee (LASC) straightening technology and default straightening method in the simulation system shows that the straightness accuracy of LASC straightening technology under complex floor conditions is slightly less than that of the default straightening method in the proposed system.

Sign in / Sign up

Export Citation Format

Share Document