Vibrating-uplift rocking motion of caisson breakwaters under various breaking wave impact forces

2005 ◽  
Vol 26 (5) ◽  
pp. 579-586
Author(s):  
Wang Yuan-zhan ◽  
Zhou Zhi-rong ◽  
Yang Hai-dong
Keyword(s):  
Breaking Wave ◽  
Wave Impact ◽  
Impact Forces ◽  
Rocking Motion

The Distribution of Breaking and Non-Breaking Wave Impact Forces

2009 ◽  
Author(s):  
Anne M. Fullerton ◽  
Ann Marie Powers ◽  
Don C. Walker ◽  
Susan Brewton
Keyword(s):  
Breaking Wave ◽  
Wave Impact ◽  
Impact Forces

Motion and stability of caisson breakwaters under breaking wave impact

2001 ◽  
Vol 28 (6) ◽  
pp. 960-968 ◽  
Author(s):  
Y -Z Wang
Keyword(s):  
Dynamic Characteristics ◽  
Wave Force ◽  
Breaking Wave ◽  
Wave Impact ◽  
Sliding Motion ◽  
Rocking Motion ◽  
Overturning Moment ◽  
The Stability ◽  
Caisson Breakwater ◽  
Sliding Force

The possible motions of caisson breakwaters under dynamic load excitation include vibrating motion, vibrating–sliding motion, and vibrating–rocking motion. Three models are presented in this paper and are used to simulate the histories of vibrating–sliding–rocking motions of caissons under breaking wave impact. The effect of the dynamic characteristics of the caisson–foundation system and the motions on the displacement, rotation, sliding force, and overturning moment of caissons are investigated. It is shown that the sliding force of the caisson is different from the breaking wave force directly acting on the caisson due to the motion of the caisson and the sliding motion or rocking motion of the caisson can limit the sliding force or overturning moment of the caisson to a certain value. The sliding force never exceeds the friction force between the caisson and the foundation, and the overturning moment never exceeds the stability moment of the caisson. It is concluded that the wave conditions, the dynamic characteristics, and the motions of the caisson–foundation system should be considered in design.Key words: caisson breakwater, breaking wave, vibrating, sliding, rocking.

Experimental Investigations of Breaking Wave Impact Forces on a Monopile Substructure for Offshore Wind Turbines Under Regular Breaking Waves

2017 ◽  
Author(s):  
Vipin Chakkurunni Palliyalil ◽  
Panneer Selvam Rajamanickam ◽  
Mayilvahanan Alagan Chella ◽  
Vijaya Kumar Govindasamy
Keyword(s):  
Circular Cylinder ◽  
Wind Turbines ◽  
Breaking Waves ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Breaking Wave ◽  
Wave Impact ◽  
Offshore Wind Turbines ◽  
Impact Forces ◽  
The Impact

The main objective of the paper is to investigate wave impact forces from breaking waves on a monopile substructure for offshore wind turbine in shallow waters. This study examines the load assessment parameters relevant for breaking wave forces on a vertical circular cylinder subjected to breaking waves. Experiments are conducted in a shallow water flume and the wave generation is based on piston type wave maker. The experiments are performed with a vertical circular cylinder with diameter, D = 0.20m which represents a monopile substructure for offshore wind turbines with regular waves of frequencies around 0.8Hz. The experimental setup consists of a 1/10 slope followed by a horizontal bed portion with a water depth of 0.8m. Plunging breaking waves are generated and free surface elevations are measured at different locations along the wave tank from wave paddle to the cylinder in order to find the breaking characteristics. Wave impact pressures are measured on the cylinder at eight different vertical positions along the height of the cylinder under breaking waves for different environmental conditions. The wave impact pressures and wave surface elevations in the vicinity of the cylinder during the impact for three different wave conditions are presented and discussed.

scholarly journals Influence of the Spatial Pressure Distribution of Breaking Wave Loading on the Dynamic Response of Wolf Rock Lighthouse

2021 ◽  
Vol 9 (1) ◽  
pp. 55
Author(s):  
Darshana T. Dassanayake ◽  
Alessandro Antonini ◽  
Athanasios Pappas ◽  
Alison Raby ◽  
James Mark William Brownjohn ◽  
...  
Keyword(s):  
Dynamic Response ◽  
Pressure Distribution ◽  
Distinct Element ◽  
Breaking Waves ◽  
Breaking Wave ◽  
Wave Loading ◽  
Wave Impact ◽  
Pressure Distributions ◽  
Impact Area ◽  
The Impact

The survivability analysis of offshore rock lighthouses requires several assumptions of the pressure distribution due to the breaking wave loading (Raby et al. (2019), Antonini et al. (2019). Due to the peculiar bathymetries and topographies of rock pinnacles, there is no dedicated formula to properly quantify the loads induced by the breaking waves on offshore rock lighthouses. Wienke’s formula (Wienke and Oumeraci (2005) was used in this study to estimate the loads, even though it was not derived for breaking waves on offshore rock lighthouses, but rather for the breaking wave loading on offshore monopiles. However, a thorough sensitivity analysis of the effects of the assumed pressure distribution has never been performed. In this paper, by means of the Wolf Rock lighthouse distinct element model, we quantified the influence of the pressure distributions on the dynamic response of the lighthouse structure. Different pressure distributions were tested, while keeping the initial wave impact area and pressure integrated force unchanged, in order to quantify the effect of different pressure distribution patterns. The pressure distributions considered in this paper showed subtle differences in the overall dynamic structure responses; however, pressure distribution #3, based on published experimental data such as Tanimoto et al. (1986) and Zhou et al. (1991) gave the largest displacements. This scenario has a triangular pressure distribution with a peak at the centroid of the impact area, which then linearly decreases to zero at the top and bottom boundaries of the impact area. The azimuthal horizontal distribution was adopted from Wienke and Oumeraci’s work (2005). The main findings of this study will be of interest not only for the assessment of rock lighthouses but also for all the cylindrical structures built on rock pinnacles or rocky coastlines (with steep foreshore slopes) and exposed to harsh breaking wave loading.

Sailing Yacht Capsizing

1981 ◽  
Author(s):  
Olin J. Stephens ◽  
Karl L. Kirkman ◽  
Robert S. Peterson
Keyword(s):  
Stability Analysis ◽  
Dynamic Mechanism ◽  
Focused Attention ◽  
Breaking Wave ◽  
Wave Impact ◽  
Single Wave ◽  
Loss Of Life ◽  
Classical Stability ◽  
Sailing Yacht

The 1979 Fastnet focused attention upon yacht capsizes and resulting damage and loss of life. A classical stability analysis does not clearly reveal some of the characteristics of the modern racing yacht which may exacerbate a capsizing tendency. A review of the mechanism of a single-wave-impact capsize reveals inadequacies in static methods of stability analysis and hints at a connection between recent design trends and an increased frequency of capsize. The paper traces recent design trends, relates these to capsizing by a description of the dynamic mechanism of breaking wave impact, and outlines the unusual oceanography of the 1979 Fastnet which led to a heightened incidence of capsize.

scholarly journals WAVE RUN-UP AT SEA DIKES UNDER OBLIQUE WAVE APPROACH

1982 ◽  
Vol 1 (18) ◽  
pp. 50
Author(s):  
E. Tautenhain ◽  
S. Kohlhase ◽  
H.W. Partenscky
Keyword(s):  
Irregular Waves ◽  
Wave Direction ◽  
Wave Runup ◽  
Natural Conditions ◽  
Wave Impact ◽  
Oblique Wave ◽  
Wave Flume ◽  
Wave Approach ◽  
Impact Forces ◽  
Run Up

Besides wave impact forces, erosion of the inner side of a sea dike is a serious cause of destruction. Therefore, wave run-up and overtopping effects have to be considered with respect to the safety of a dike. Strong relations were found between both these influences (TAUTENHAIN et.al., 1980, 1981, 1982), based on experiments in a wave flume and using an energy conservation concept. However, under natural conditions, an oblique wave approach has to be considered. This paper deals with the influence of wave direction on wave runup on a smooth dike slope in order to provide a basis for calculating the overtopping rates for both regular and irregular waves.

On the Validity and Sensitivity of CFD Simulations for a Deterministic Breaking Wave Impact on a Semi Submersible

2018 ◽  
Author(s):  
Henry Bandringa ◽  
Joop A. Helder
Keyword(s):  
Free Surface ◽  
Absorbing Boundary Conditions ◽  
Implicit Time ◽  
Breaking Wave ◽  
Computational Domain ◽  
Wave Impact ◽  
Time Step ◽  
Cfd Simulations ◽  
Detailed Model ◽  
Run Up

To assess the integrity and safety of structures offshore, prediction of run-up, green water, and impact loads needs to be made during the structure’s design. For predicting these highly non-linear phenomena, most of the offshore industry relies on detailed model testing. In the last couple of years however, CFD simulations have shown more and more promising results in predicting these events, see for instance [1]–[4]. To obtain confidence in the accuracy of CFD simulations in the challenging field of extreme wave impacts, a proper validation of such CFD tools is essential. In this paper two CFD tools are considered for the simulation of a deterministic breaking wave impact on a fixed semi submersible, resulting in flow phenomena like wave run-up, horizontal wave impact and deck impacts. Hereby, one of the CFD tools applies an unstructured gridding approach and implicit free-surface reconstruction, and uses an implicit time integration with a fixed time step. The other CFD tool explicitly reconstructs the free surface on a structured grid and integrates the free surface explicitly in time, using a variable time step. The presented simulations use a compact computational domain with wave absorbing boundary conditions and local grid refinement to reduce CPU time. Besides a typical verification and validation of the results, for one of the CFD tools a sensitivity study is performed in which the influence of small variations in the incoming breaking wave on the overall results is assessed. Such an analysis should provide the industry more insight in the to-be-expected sensitivity (and hence uncertainty) of CFD simulations for these type of applications. Experiments carried out by MARIN are used to validate all the presented simulation results.

Response of a slender cylindrical member under Breaking wave impact

2019 ◽  
Vol 31 (2) ◽  
pp. 345-357 ◽  
Author(s):  
R Manjula ◽  
S. A. Sannasiraj
Keyword(s):  
Breaking Wave ◽  
Wave Impact
Sign in / Sign up

Export Citation Format

Share Document