Grain yield gains and associated traits in tropical × temperate maize germplasm under high and low plant density

Euphytica ◽  
2021 ◽  
Vol 217 (10) ◽  
Author(s):  
Vince Ndou ◽  
Edmore Gasura ◽  
Pauline Chivenge ◽  
John Derera
Keyword(s):  
Grain Yield ◽  
Plant Density ◽  
Maize Germplasm

Grain Yield Gains and Associated Traits in Tropical X Temperate Maize Germplasm Under High and Low Plant Density

2021 ◽  
Author(s):  
Vince Ndou ◽  
Edmore Gasura ◽  
Pauline Chivenge ◽  
John Derera
Keyword(s):  
Population Density ◽  
Grain Yield ◽  
Plant Density ◽  
Plant Population ◽  
Population Densities ◽  
Genetic Gains ◽  
Maize Germplasm ◽  
High Plant Density ◽  
Number Of Leaves ◽  
Plant Population Density

Abstract Development of ideal breeding and crop management strategies that can improve maize grain yield under tropical environments is crucial. In the temperate regions, such yield improvements were achieved through use of genotypes that adapt high plant population density stress. However, tropical germplasm has poor tolerance to high plant population density stress, and thus it should be improved by temperate maize. The aim of this study was to estimate the genetic gains and identify traits associated with such gains in stable and high yielding temperate x tropical hybrids under low and high plant population densities. A total of 200 hybrids derived from a line x tester mating design of tropical x temperate germplasm were developed. These hybrids were evaluated for grain yield and allied traits under varied plant population densities. High yielding and stable hybrids, such as 15XH214, 15XH215 and 15XH121 were resistant to lodging and had higher number of leaves above the cob. The high genetic gains of 26% and desirable stress tolerance indices of these hybrids made them better performers over check hybrids under high plant population density. At high plant population density yield was correlated to stem lodging and number of leaves above the cob. Future gains in grain yield of these hybrids derived from temperate x tropical maize germplasm can be achieved by exploiting indirect selection for resistance to stem lodging and increased number of leaves above the cob under high plant density conditions.

YIELD OF CORN HYBRIDS DEPENDING ON PLANT DENSITY AND FERTILIZATION SYSTEMS

2020 ◽  
Author(s):  
V. Polyakov ◽  
Keyword(s):  
Grain Yield ◽  
Plant Density ◽  
Growing Season ◽  
Research Field ◽  
Forest Steppe ◽  
Corn Yield ◽  
Field Calculation ◽  
Corn Hybrids ◽  
Maize Hybrid ◽  
Fertilizer System

The article presents the results of research on the formation of corn yield for grain depending on the elements of cultivation technology in the Forest-Steppe of Ukraine. The goal of the research was to identify the influence of plant density and fertilizer system on the yield of corn hybrids for grain. The research was conducted during 2017-2019 in the research field of Bila Tserkva National Agrarian University (Bila Tserkva NAU). Research methods: field, calculation and statistical. Results. Regularities of growth, development and formation of yield by plants are revealed, both in concrete conditions of years of researches, and taking into account average long-term values taking into account features of hybrid-oriented technology. According to the results of the experiment it was recorded that the maximum yields for growing early-maturing maize hybrid DN PIVYHA with FAO 180 in general were obtained at a pre-harvest density of 75 thousand units/ha and the use of combined organo-mineral fertilizer system - 11.09 t/ha; medium-early maize hybrid DN ORLYK, FAO 280 in general in the experiment provided a grain yield of 9.60 t/ha, and in terms of 2017 - 7.86 t/ha, in 2018 - 11.22 t/ha and in 2019 - 9, 72 t/ha, but the medium-ripe hybrid of corn DN SARMAT, FAO 380 provided a grain yield of 10.81 t/ha, and in the context of 2017 - 9.31 t/ha, in 2018 - 11.68 t/ha and in 2019 - 11.44 t/ha. Significant influence on the formation of the yield of corn has a hybrid factor (27 %), fertilizer system determines the level of productivity by 21 % and interacts closely with the conditions of the growing season (factor BV 9 %), growing season conditions also determine the level of productivity of corn plants (19 %), and the pre-harvest density determines this feature by 18 %. Conclusions: In the conditions of the Right Bank part of the Forest-Steppe of Ukraine there is an increase in the level of productivity of maize hybrids from early to medium-ripe hybrids, regardless of the influence of other experimental factors.

scholarly journals Optimizing Grain Yield and Water Use Efficiency Based on the Relationship between Leaf Area Index and Evapotranspiration

Agriculture ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 313
Author(s):  
Guoqiang Zhang ◽  
Bo Ming ◽  
Dongping Shen ◽  
Ruizhi Xie ◽  
Peng Hou ◽  
...  
Keyword(s):  
Grain Yield ◽  
Water Use Efficiency ◽  
Leaf Area Index ◽  
Water Use ◽  
Plant Density ◽  
Maize Yield ◽  
Area Index ◽  
Irrigation Level ◽  
Use Efficiency ◽  
The Relationship

Achieving optimal balance between maize yield and water use efficiency is an important challenge for irrigation maize production in arid areas. In this study, we conducted an experiment in Xinjiang China in 2016 and 2017 to quantify the response of maize yield and water use to plant density and irrigation schedules. The treatments included four irrigation levels: 360 (W1), 480 (W2), 600 (W3), and 720 mm (W4), and five plant densities: 7.5 (D1), 9.0 (D2), 10.5 (D3), 12.0 (D4), and 13.5 plants m−2 (D5). The results showed that increasing the plant density and the irrigation level could both significantly increase the leaf area index (LAI). However, LAI expansion significantly increased evapotranspiration (ETa) under irrigation. The combination of irrigation level 600 mm (W3) and plant density 12.0 plants m−2 (D4) produced the highest maize yield (21.0–21.2 t ha−1), ETa (784.1–797.8 mm), and water use efficiency (WUE) (2.64–2.70 kg m−3), with an LAI of 8.5–8.7 at the silking stage. The relationship between LAI and grain yield and evapotranspiration were quantified, and, based on this, the relationship between water use and maize productivity was analyzed. Moreover, the optimal LAI was established to determine the reasonable irrigation level and coordinate the relationship between the increase in grain yield and the decrease in water use efficiency.

scholarly journals Optimizing Planting Density and Impact of Panicle Types on Grain Yield and Microclimatic Response Index of Hybrid Rice (Oryza sativa L.)

2021 ◽  
Author(s):  
Guotao Yang ◽  
Xuechun Wang ◽  
Farhan Nabi ◽  
Hongni Wang ◽  
Changkun Zhao ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Light Intensity ◽  
Grain Yield ◽  
Hybrid Rice ◽  
Plant Density ◽  
Oryza Sativa L ◽  
Planting Density ◽  
Response Index ◽  
Lower Position ◽  
High Plant Density

AbstractThe architecture of rice plant represents important and complex agronomic traits, such as panicles morphology, which directly influence the microclimate of rice population and consequently grain yield. To enhance yield, modification of plant architecture to create new hybrid cultivars is considered a sustainable approach. The current study includes an investigation of yield and microclimate response index under low to high plant density of two indica hybrid rice R498 (curved panicles) and R499 (erect panicles), from 2017 to 2018. The split-plot design included planting densities of 11.9–36.2 plant/m2. The results showed that compared with R498, R499 produced a higher grain yield of 8.02–8.83 t/ha at a higher planting density of 26.5–36.2 plant/m2. The response index of light intensity and relative humidity to the planting density of R499 was higher than that of R498 at the lower position of the rice population. However, the response index of temperature to the planting density of R499 was higher at the upper position (0.2–1.4%) than at the lower position. Compared with R498, R499 at a high planting density developed lower relative humidity (78–88%) and higher light intensity (9900–15,916 lx) at the lower position of the rice population. Our finding suggests that erect panicles are highly related to grain yield microclimatic contributors under a highly dense rice population, such as light intensity utilization, humidity, and temperature. The application of erect panicle rice type provides a potential strategy for yield improvement by increasing microclimatic conditions in rice.

scholarly journals Effects of seeding date and seeding rate on yield, proximate composition and total tannins content of two Kabuli chickpea cultivars

2017 ◽  
Vol 12 (3) ◽  
Author(s):  
Roberto Ruggeri ◽  
Riccardo Primi ◽  
Pier Paolo Danieli ◽  
Bruno Ronchi ◽  
Francesco Rossini
Keyword(s):  
Grain Yield ◽  
Plant Density ◽  
Ascochyta Blight ◽  
Climatic Conditions ◽  
Seeding Rate ◽  
Crude Fibre ◽  
Seeding Date ◽  
Cultivar Selection ◽  
Marked Resistance ◽  
Considerable Range

Experiments were conducted in open field to assess the effect of seeding season and density on the yield, the chemical composition and the accumulation of total tannins in grains of two chickpea (<em>Cicer arietinum</em> L.) cultivars (<em>Pascià</em> and <em>Sultano</em>). Environmental conditions and genetic factors considerably affected grain yield, nutrient and total tannins content of chickpea seeds, giving a considerable range in its qualitative characteristics. Results confirmed cultivar selection as a central factor when a late autumn-early winter sowing is performed. In effect, a more marked resistance to Ascochyta blight (AB) of <em>Sultano</em>, allowed better agronomic performances when favourable-to-AB climatic conditions occur. Winter sowing appeared to be the best choice in the Mediterranean environment when cultivating to maximise the grain yield (+19%). Spring sowing improved crude protein (+10%) and crude fibre (+8%) content, whereas it did not significantly affect the accumulation of anti-nutrients compounds such as total tannins. The most appropriate seeding rate was 70 seeds m–2, considering that plant density had relatively little effect on the parameters studied.

scholarly journals PLANT DENSITY AND NITROGEN FERTILIZATION ON COMMON BEAN NUTRITION AND YIELD

2017 ◽  
Vol 30 (3) ◽  
pp. 670-678 ◽  
Author(s):  
ROGÉRIO PERES SORATTO ◽  
TIAGO ARANDA CATUCHI ◽  
EMERSON DE FREITAS CORDOVA DE SOUZA ◽  
JADER LUIS NANTES GARCIA
Keyword(s):  
Grain Yield ◽  
Common Bean ◽  
Nitrogen Fertilization ◽  
Dry Matter ◽  
Plant Density ◽  
N Fertilization ◽  
N Concentration ◽  
Plant Densities ◽  
N Rates ◽  
Lower Plant

ABSTRACT The objective of this work was to evaluate the effect of plant densities and sidedressed nitrogen (N) rates on nutrition and productive performance of the common bean cultivars IPR 139 and Pérola. For each cultivar, a randomized complete block experimental design was used in a split-plot arrangement, with three replicates. Plots consisted of three plant densities (5, 7, and 9 plants ha-1) and subplots of five N rates (0, 30, 60, 120, and 180 kg ha-1). Aboveground dry matter, leaf macro- and micronutrient concentrations, yield components, grain yield, and protein concentration in grains were evaluated. Lower plant densities (5 and 7 plants m-1) increased aboveground dry matter production and the number of pods per plant and did not reduce grain yield. In the absence of N fertilization, reduction of plant density decreased N concentration in common bean leaves. Nitrogen fertilization linearly increased dry matter and leaf N concentration, mainly at lower plant densities. Regardless of plant density, the N supply linearly increased grain yield of cultivars IPR 139 and Pérola by 17.3 and 52.2%, respectively.

Response of pigeon pea (Cajanus cajan (L.) Millsp.) to plant density and phosphorus fertilizer under dryland conditions

1981 ◽  
Vol 97 (1) ◽  
pp. 119-124 ◽  
Author(s):  
I. P. S. Ahlawat ◽  
C. S. Saraf
Keyword(s):  
Grain Yield ◽  
Shoot Growth ◽  
Plant Density ◽  
Sandy Loam ◽  
Phosphate Fertilizer ◽  
Pigeon Pea ◽  
Phosphorus Fertilizer ◽  
Total N ◽  
Root And Shoot Growth ◽  
Plant Densities

SUMMARYField studies were made for 2 years on a sandy loam soil under dryland conditions of north-west India with three pigeon-pea varieties in relation to plant density and the application of phosphate fertilizer. Varieties Pusa Ageti and P4785 with better developed root system and profuse nodulation had higher grain and stalk yield, and higher N and P yield than Prabhat. Root and shoot growth and root nodulation were adversely affected with increasing plant densities in the range 50 × 103 and 150 × 103 plants/ha. Stalk and total N and P yield increased with increasing plant density. Plant density of 117 × 103 plants/ha produced maximum grain yield of 1·53 t/ha. Phosphorus fertilizer promoted root and shoot growth, intensity and volume of nodulation and increased grain, stalk, N and P yield. The effect of plant density on grain yield was more pronounced in the presence of phosphate fertilizer. The economic optimum rate of P ranged between 22·1 and 23·1 kg/ha under different plant densities.

scholarly journals Spatial arrangement of maize plants aiming to maximize grain yield in the hybrid BRS-3046

2020 ◽  
pp. 1662-1669
Author(s):  
Marcus Willame Lopes Carvalho ◽  
Edson Alves Bastos ◽  
Milton José Cardoso ◽  
Aderson Soares de Andrade Junior ◽  
Carlos Antônio Ferreira de Sousa
Keyword(s):  
Grain Yield ◽  
Plant Density ◽  
Intercellular Co2 Concentration ◽  
Maximum Yield ◽  
Co2 Concentration ◽  
Spatial Arrangement ◽  
Co2 Assimilation ◽  
Linear Increase ◽  
Planting Density ◽  
Row Spacing

The objectives of this study were to: (i) evaluate the effect of different spatial arrangements on morpho-physiological characteristics and (ii) determine the optimal spatial arrangement to maximize grain yield of the maize hybrid BRS-3046 grown in the Mid-North region of Brazil. We tested two row spacings (0.5 and 1 m) and five plant densities (2, 4, 6, 8, 10 plants m-2), which corresponded to 10 different plant spatial arrangements. Different morphophysiological variables, gas exchange rates and grain yield were measured. The increased planting density led to a linear increase in LAI, regardless of row spacing, while the net CO2 assimilation rate increased until the density of 4 and 6 plants m-2, under a row spacing of 0.5 and 1.0 m, respectively. On the other hand, we found a linear reduction in the stomatal conductance with increasing planting density. The intercellular CO2 concentration and the transpiration rate were higher in the widest row spacing. The instantaneous efficiency of carboxylation, in turn, showed a slight increase up to the density of six plants m-2, then falling, regardless of row spacing. Increasing plant density resulted in a linear increase in plant height and ear insertion height, regardless of row spacing. However, it had an opposite effect on stem diameter. Grain yield, in turn, increased up to 7.3 plants m-2 at a row spacing of 0.5 m and 8 plants m-2 at a row spacing of 1.0 m. This spatial arrangement was considered as ideal for achieving maximum yield

scholarly journals Patterns of tillering and grain production of winter wheat at a wide range of plant densities.

1978 ◽  
Vol 26 (4) ◽  
pp. 383-398 ◽  
Author(s):  
A. Darwinkel
Keyword(s):  
Winter Wheat ◽  
Grain Yield ◽  
Harvest Index ◽  
Plant Density ◽  
Fold Increase ◽  
Grain Production ◽  
Higher Plant ◽  
Grain Number ◽  
Wide Range ◽  
Plant Densities

The effect of plant density on the growth and productivity of the various ear-bearing stems of winter wheat was studied in detail to obtain information on the pattern of grain production of crops grown under field conditions. Strong compensation effects were measured: a 160-fold increase in plant density (5-800 plants/m2) finally resulted in a 3-fold increase in grain yield (282 to 850 g DM/m2). Max. grain yield was achieved at 100 plants/m2, which corresponded to 430 ears/m2 and to about 19 000 grains/m2. At higher plant densities more ears and more grains were produced, but grain yield remained constant. Tillering/plant was largely favoured by low plant densities because these allowed tiller formation to continue for a longer period and a greater proportion of tillers produced ears. However, at higher plant densities more tillers/unit area were formed and, despite a higher mortality, more ears were produced. The productivity of individual ears, from main stems as well as from tillers, decreased with increasing plant density and with later emergence of shoots. In the range from 5 to 800 plants/m2 grain yield/ear decreased from 2.40 to 1.14 g DM. At 800 plants/m2 nearly all ears originated from main stems, but with decreasing plant density tillers contributed increasingly to the number of ears. At 5 plants/m2, there were 23 ears/plant and grain yield/ear ranged from 4.20 (main stem) to 1.86 g DM (late-formed stems). Grain number/ear was reduced at higher densities and on younger stems, because there were fewer fertile spikelets and fewer grains in these spikelets. At the low density of 5 plants/m2, plants developed solitarily and grain yield/ear was determined by the number of grains/ear as well as by grain wt. Above 400 ears/m2, in this experiment reached at 100 plants/m2 and more, grain yield/ear depended solely on grain number, because the wt. of grains of the various stems were similar. The harvest index showed a max. of about 44% at a moderate plant density; at this density nearly max. grain yield was achieved. At low plant densities the harvest index decreased from 45% in main stems to about 36% in late-formed stems. However, no differences in harvest index existed between the various ear-bearing stems if the number of ears exceeded 400/m2. (Abstract retrieved from CAB Abstracts by CABI’s permission)

scholarly journals Ethephon Reduces Maize Nitrogen Uptake but Improves Nitrogen Utilization in Zea mays L.

2022 ◽  
Vol 12 ◽  
Author(s):  
Yushi Zhang ◽  
Yubin Wang ◽  
Churong Liu ◽  
Delian Ye ◽  
Danyang Ren ◽  
...  
Keyword(s):  
Grain Yield ◽  
Plant Density ◽  
N Uptake ◽  
Utilization Efficiency ◽  
N Application ◽  
Total N ◽  
N Concentration ◽  
High Plant Density ◽  
Ethephon Treatment ◽  
N Use

Increasing use of plant density or/and nitrogen (N) application has been introduced to maize production in the past few decades. However, excessive planting density or/and use of fertilizer may cause reduced N use efficiency (NUE) and increased lodging risks. Ethephon application improves maize lodging resistance and has been an essential measure in maize intensive production systems associated with high plant density and N input in China. Limited information is available about the effect of ethephon on maize N use and the response to plant density under different N rates in the field. A three-year field study was conducted with two ethephon applications (0 and 90 g ha−1), four N application rates (0, 75, 150, and 225 kg N ha−1), and two plant densities (6.75 plants m−2 and 7.5 plants m−2) to evaluate the effects of ethephon on maize NUE indices (N agronomic efficiency, NAE; N recovery efficiency, NRE; N uptake efficiency, NUpE; N utilization efficiency, NUtE; partial factor productivity of N, PFPN), biomass, N concentration, grain yield and N uptake, and translocation properties. The results suggest that the application of ethephon decreased the grain yield by 1.83–5.74% due to the decrease of grain numbers and grain weight during the three experimental seasons. Meanwhile, lower biomass, NO3- and NH4+ fluxes in xylem bleeding sap, and total N uptake were observed under ethephon treatments. These resulted in lower NAE and NUpE under the ethephon treatment at a corresponding N application rate and plant density. The ethephon treatment had no significant effects on the N concentration in grains, and it decreased the N concentration in stover at the harvesting stage, while increasing the plant N concentration at the silking stage. Consequently, post-silking N remobilization was significantly increased by 14.10–32.64% under the ethephon treatment during the experimental periods. Meanwhile, NUtE significantly increased by ethephon.

Sign in / Sign up

Export Citation Format

Share Document