In-field 57Fe Mössbauer study of MgxZn1-xFe2O4 prepared by green synthesis method

2022 ◽  
Vol 243 (1) ◽  
Author(s):  
P. Tiwari ◽  
R. Verma ◽  
S. S. Modak ◽  
V. R. Reddy ◽  
S. N. Kane
Keyword(s):  
Green Synthesis ◽  
Synthesis Method ◽  
Mössbauer Study ◽  
57Fe Mössbauer

Recent Advances and Need of Green Synthesis in Two-Dimensional Materials for Energy Conversion and Storage Applications

2021 ◽  
Vol 16 ◽  
Author(s):  
Joice Sophia Ponraj ◽  
Muniraj Vignesh Narayanan ◽  
Ranjith Kumar Dharman ◽  
Valanarasu Santiyagu ◽  
Ramalingam Gopal ◽  
...  
Keyword(s):  
Energy Storage ◽  
Green Synthesis ◽  
2D Materials ◽  
Synthesis Method ◽  
Energy Storage And Conversion ◽  
Two Dimensional ◽  
Severe Problem ◽  
Energy Conversion And Storage ◽  
Energy Application ◽  
The Impact

: Increasing energy crisis across the globe requires immediate solutions. Two-dimensional (2D) materials are in great significance because of its application in energy storage and conversion devices but the production process significantly impacts the environment thereby posing a severe problem in the field of pollution control. Green synthesis method provides an eminent way of reduction in pollutants. This article reviews the importance of green synthesis in the energy application sector. The focus of 2D materials like graphene, MoS2, VS2 in energy storage and conversion devices are emphasized based on supporting recent reports. The emerging Li-ion batteries are widely reviewed along with their promising alternatives like Zn, Na, Mg batteries and are featured in detail. The impact of green methods in the energy application field are outlined. Moreover, future outlook in the energy sector is envisioned by proposing an increase in 2D elemental materials research.

scholarly journals Green Synthesis of Copper Nanoparticles Using Cotton

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1906
Author(s):  
Marissa Pérez-Alvarez ◽  
Gregorio Cadenas-Pliego ◽  
Odilia Pérez-Camacho ◽  
Víctor E. Comparán-Padilla ◽  
Christian J. Cabello-Alvarado ◽  
...  
Keyword(s):  
Green Synthesis ◽  
Copper Nanoparticles ◽  
Uv Spectroscopy ◽  
Synthesis Method ◽  
Crystallinity Index ◽  
Reaction Conditions ◽  
New Synthesis ◽  
Water As Solvent ◽  
Characterization Studies ◽  
Xrd Patterns

Copper nanoparticles (CuNP) were obtained by a green synthesis method using cotton textile fibers and water as solvent, avoiding the use of toxic reducing agents. The new synthesis method is environmentally friendly, inexpensive, and can be implemented on a larger scale. This method showed the cellulose capacity as a reducing and stabilizing agent for synthetizing Cellulose–Copper nanoparticles (CCuNP). Nanocomposites based on CCuNP were characterized by XRD, TGA, FTIR and DSC. Functional groups present in the CCuNP were identified by FTIR analysis, and XRD patterns disclosed that nanoparticles correspond to pure metallic Cu°, and their sizes are at a range of 13–35 nm. Results demonstrated that CuNPs produced by the new method were homogeneously distributed on the entire surface of the textile fiber, obtaining CCuNP nanocomposites with different copper wt%. Thus, CuNPs obtained by this method are very stable to oxidation and can be stored for months. Characterization studies disclose that the cellulose crystallinity index (CI) is modified in relation to the reaction conditions, and its chemical structure is destroyed when nanocomposites with high copper contents are synthesized. The formation of CuO nanoparticles was confirmed as a by-product, through UV spectroscopy, in the absorbance range of 300–350 nm.

scholarly journals Green synthesis and characterization of hexaferrite strontium-perovskite strontium photocatalyst nanocomposites

2020 ◽  
Vol 43 (1) ◽  
pp. 26-42 ◽  
Author(s):  
Zahra Hajian Karahroudi ◽  
Kambiz Hedayati ◽  
Mojtaba Goodarzi
Keyword(s):  
Magnetic Properties ◽  
Green Synthesis ◽  
Sol Gel ◽  
Synthesis Method ◽  
Combustion Method ◽  
Lemon Juice ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion

AbstractThis study presents a preparation of SrFe12O19– SrTiO3 nanocomposite synthesis via the green auto-combustion method. At first, SrFe12O19 nanoparticles were synthesized as a core and then, SrTiO3 nanoparticles were prepared as a shell for it to manufacture SrFe12O19–SrTiO3 nanocomposite. A novel sol-gel auto-combustion green synthesis method has been used with lemon juice as a capping agent. The prepared SrFe12O19–SrTiO3 nanocomposites were characterized by using several techniques to characterize their structural, morphological and magnetic properties. The crystal structures of the nanocomposite were investigated via X-ray diffraction (XRD). The morphology of SrFe12O19– SrTiO3 nanocomposite was studied by using a scanning electron microscope (SEM). The elemental composition of the materials was analyzed by an energy-dispersive X-ray (EDX). Magnetic properties and hysteresis loop of nanopowder were characterized via vibrating sample magnetometer (VSM) in the room temperature. Fourier transform infrared spectroscopy (FTIR) spectra of the samples showed the molecular bands of nanoparticles. Also, the photocatalytic behavior of nanocomposites has been checked by the degradation of azo dyes under irradiation of ultraviolet light.

Green synthesis of silver nanoparticles from deoiled brown algal extract via Box-Behnken based design and their antimicrobial and sensing properties

2017 ◽  
Vol 6 (2) ◽  
Author(s):  
Saravana Periaswamy Sivagnanam ◽  
Adane Tilahun Getachew ◽  
Jae Hyung Choi ◽  
Yong Beom Park ◽  
Hee Chul Woo ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Green Synthesis ◽  
Design Of Experiment ◽  
Synthesis Method ◽  
Statistical Design ◽  
Sensing Properties ◽  
Algal Extract

AbstractThe aim of this work was to acquire even and sphere-shaped silver nanoparticles (AgNPs) using statistical design of experiment. AgNPs were produced by green synthesis method using deoiled

scholarly journals Optimization of Green Synthesis of Silver Nanoparticles from Leaf Extracts ofPimenta dioica(Allspice)

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Akshay Rajeev Geetha ◽  
Elizabeth George ◽  
Akshay Srinivasan ◽  
Jameel Shaik
Keyword(s):  
Silver Nanoparticles ◽  
Green Synthesis ◽  
Leaf Extract ◽  
Synthesis Method ◽  
Leaf Extracts ◽  
Synthesis Of Nanoparticles ◽  
Hot Air ◽  
Vis Spectroscopy ◽  
Pimenta Dioica ◽  
First Time

Production of silver nanoparticles from the leaf extracts ofPimenta dioicais reported for the first time in this paper. Three different sets of leaves were utilized for the synthesis of nanoparticles—fresh, hot-air oven dried, and sun-dried. These nanoparticles were characterized using UV-Vis spectroscopy and AFM. The results were diverse in that different sizes were seen for different leaf conditions. Nanoparticles synthesized using sun-dried leaves (produced using a particular ratio (1 : 0.5) of the leaf extract sample and silver nitrate (1 mM), resp.) possessed the smallest sizes. We believe that further optimization of the current green-synthesis method would help in the production of monodispersed silver nanoparticles having great potential in treating several diseases.

57Fe Mössbauer study of Zn doped cobalt based (Co2Y) Y-type Ba0.5Sr1.5Co2Fe12O22 hexaferrites

2021 ◽  
Vol 242 (1) ◽  
Author(s):  
M. Manendar ◽  
Ch. Gopal Reddy ◽  
Manivel Raja ◽  
M. Sreenath Reddy ◽  
P. Yadagiri Reddy ◽  
...  
Keyword(s):  
Mössbauer Study ◽  
57Fe Mössbauer

Optimization of Green Synthesis Approach of Silver Nanoparticles Using Indonesian Wild Honey

2021 ◽  
Vol 891 ◽  
pp. 111-115
Author(s):  
Maradhana Agung Marsudi ◽  
Farah Fitria Sari ◽  
Pandu Mauliddin Wicaksono ◽  
Adinda Asmoro ◽  
Arif Basuki ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Silver Nanoparticles ◽  
Green Synthesis ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Particle Count ◽  
Transmission Electron ◽  
Nitrate Precursor ◽  
Synthesis Approach

In this work, silver nanoparticles have been successfully synthesized using simple and environmentally friendly ‘green synthesis’ method using Indonesian wild honey as mediator. Particle count and size can be optimized by varying the silver nitrate precursor and honey concentration, with the help of sodium hydroxide as pH regulator. Based on X-ray diffraction (XRD) result, crystalline structure of Ag has been confirmed in sample with impurities from AgCl. Based on dynamic light scattering (DLS) and transmission electron microscopy (TEM) results, it was found that the smallest average particles size of AgNPs (117.5 nm from DLS and 11.1 nm from TEM) was obtained at sample with 5% w/v of honey and 0.5 mM of AgNO3.

Intricate magnetic behavior of Fe6Ge5 and its origin within a complex iron framework: the magnetic and 57Fe Mössbauer study

2022 ◽  
pp. 163759
Author(s):  
Roman A. Khalaniya ◽  
Valeriy Yu. Verchenko ◽  
Alexei V. Sobolev ◽  
Igor A. Presniakov ◽  
Zheng Wei ◽  
...  
Keyword(s):  
Magnetic Behavior ◽  
Mössbauer Study ◽  
57Fe Mössbauer
Sign in / Sign up

Export Citation Format

Share Document