Modeling of Electromagnetic, Thermal, and Mechanical Processes in Magnetic Media with Regard for the Moment Factors

1974 ◽

Vol 32 ◽

pp. 316-317

Author(s):

A. V. Crewe

Keyword(s):

Electron Microscope ◽

High Resolution ◽

High Vacuum ◽

Scanning Transmission Electron Microscope ◽

Ultra High Vacuum ◽

Resolving Power ◽

Imaging Characteristics ◽

Transmission Electron ◽

Scanning Transmission ◽

The Moment

The high resolution STEM is now a fact of life. I think that we have, in the last few years, demonstrated that this instrument is capable of the same resolving power as a CEM but is sufficiently different in its imaging characteristics to offer some real advantages.It seems possible to prove in a quite general way that only a field emission source can give adequate intensity for the highest resolution^ and at the moment this means operating at ultra high vacuum levels. Our experience, however, is that neither the source nor the vacuum are difficult to manage and indeed are simpler than many other systems and substantially trouble-free.

Download Full-text

Pinocytotic-Like Forms of Mitochondria From Rat Anterior Pituitary

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100100470 ◽

1968 ◽

Vol 26 ◽

pp. 146-147

Author(s):

Burton B. Silver

Keyword(s):

Electron Micrographs ◽

Conformational Changes ◽

Anterior Pituitary ◽

Dynamic State ◽

Surrounding Cell ◽

The Matrix ◽

The Moment ◽

Cell Medium ◽

Sectioned Tissue ◽

State Of Activity

Sectioned tissue rarely indicates evidence of what is probably a highly dynamic state of activity in mitochondria which have been reported to undergo a variety of movements such as streaming, divisions and coalescence. Recently, mitochondria from the rat anterior pituitary have been fixed in a variety of configurations which suggest that conformational changes were occurring at the moment of fixation. Pinocytotic-like vacuoles which may be taking in or expelling materials from the surrounding cell medium, appear to be forming in some of the mitochondria. In some cases, pores extend into the matrix of the mitochondria. In other forms, the remains of what seems to be pinched off vacuoles are evident in the mitochondrial interior. Dense materials, resembling secretory droplets, appear at the junction of the pores and the cytoplasm. The droplets are similar to the secretory materials commonly identified in electron micrographs of the anterior pituitary.

Download Full-text

Transmission Electron Microscopy of oriented Co84Cr14Ta2 thin films for longitudinal magnetic recording

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100088099 ◽

1991 ◽

Vol 49 ◽

pp. 756-757

Author(s):

T. P. Nolan

Keyword(s):

Thin Film ◽

Electron Microscopy ◽

Transmission Electron Microscopy ◽

Low Cost ◽

Low Noise ◽

Information Storage ◽

High Coercivity ◽

Magnetic Alloy ◽

Magnetic Media ◽

Transmission Electron

Thin film magnetic media are being used as low cost, high density forms of information storage. The development of this technology requires the study, at the sub-micron level, of morphological, crystallographic, and magnetic properties, throughout the depth of the deposited films. As the microstructure becomes increasingly fine, widi grain sizes approaching 100Å, the unique characterization capabilities of transmission electron microscopy (TEM) have become indispensable to the analysis of such thin film magnetic media.Films were deposited at 225°C, on two NiP plated Al substrates, one polished, and one circumferentially textured with a mean roughness of 55Å. Three layers, a 750Å chromium underlayer, a 600Å layer of magnetic alloy of composition Co84Cr14Ta2, and a 300Å amorphous carbon overcoat were then sputter deposited using a dc magnetron system at a power of 1kW, in a chamber evacuated below 10-6 torr and filled to 12μm Ar pressure. The textured medium is presently used in industry owing to its high coercivity, Hc, and relatively low noise. One important feature is that the coercivity in the circumferential read/write direction is significandy higher than that in the radial direction.

Download Full-text

Using the scanning electron microscope for failure analysis of high density magnetic media

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100126755 ◽

1987 ◽

Vol 45 ◽

pp. 392-393

Author(s):

Evelyn R. Ackerman ◽

Gary D. Burnett

Keyword(s):

Electron Microscope ◽

Scanning Electron Microscope ◽

Failure Analysis ◽

High Density ◽

Magnetic Media ◽

Specific Data ◽

Retrieval Systems ◽

Operating Environments ◽

The Media ◽

Scanning Electron

Advancements in state of the art high density Head/Disk retrieval systems has increased the demand for sophisticated failure analysis methods. From 1968 to 1974 the emphasis was on the number of tracks per inch. (TPI) ranging from 100 to 400 as summarized in Table 1. This emphasis shifted with the increase in densities to include the number of bits per inch (BPI). A bit is formed by magnetizing the Fe203 particles of the media in one direction and allowing magnetic heads to recognize specific data patterns. From 1977 to 1986 the tracks per inch increased from 470 to 1400 corresponding to an increase from 6300 to 10,800 bits per inch respectively. Due to the reduction in the bit and track sizes, build and operating environments of systems have become critical factors in media reliability.Using the Ferrofluid pattern developing technique, the scanning electron microscope can be a valuable diagnostic tool in the examination of failure sites on disks.

Download Full-text

High-resolution scanning electron microscopy of thin-film magnetic media of magnetic recording disk

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100131309 ◽

1992 ◽

Vol 50 (2) ◽

pp. 1334-1335

Author(s):

K. Ogura ◽

H. Nishioka ◽

N. Ikeo ◽

T. Kanazawa ◽

J. Teshima

Keyword(s):

Thin Film ◽

Fine Structure ◽

High Resolution ◽

Magnetic Recording ◽

High Performance ◽

Magnetic Hysteresis ◽

Grain Structure ◽

Magnetic Media ◽

Cross Sectional ◽

Resolution Observation

Structural appraisal of thin film magnetic media is very important because their magnetic characters such as magnetic hysteresis and recording behaviors are drastically altered by the grain structure of the film. However, in general, the surface of thin film magnetic media of magnetic recording disk which is process completed is protected by several-nm thick sputtered carbon. Therefore, high-resolution observation of a cross-sectional plane of a disk is strongly required to see the fine structure of the thin film magnetic media. Additionally, observation of the top protection film is also very important in this field.Recently, several different process-completed magnetic disks were examined with a UHR-SEM, the JEOL JSM 890, which consisted of a field emission gun and a high-performance immerse lens. The disks were cut into approximately 10-mm squares, the bottom of these pieces were carved into more than half of the total thickness of the disks, and they were bent. There were many cracks on the bent disks. When these disks were observed with the UHR-SEM, it was very difficult to observe the fine structure of thin film magnetic media which appeared on the cracks, because of a very heavy contamination on the observing area.

Download Full-text

Grain separation enhanced magnetic coercivity in Pt/Co multilayers.

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100151027 ◽

1993 ◽

Vol 51 ◽

pp. 1038-1039 ◽

Cited By ~ 1

Author(s):

G.A. Bertero ◽

R. Sinclair

Keyword(s):

Remanent Magnetization ◽

Strong Influence ◽

Uniaxial Anisotropy ◽

Magnetic Coupling ◽

Recording Media ◽

Magnetic Media ◽

Signal To Noise ◽

Out Of Plane ◽

Longitudinal Recording ◽

The Relationship

Pt/Co multilayers displaying perpendicular (out-of-plane) magnetic anisotropy and 100% perpendicular remanent magnetization are strong candidates as magnetic media for the next generation of magneto-optic recording devices. The magnetic coercivity, Hc, and uniaxial anisotropy energy, Ku, are two important materials parameters, among others, in the quest to achieving higher recording densities with acceptable signal to noise ratios (SNR). The relationship between Ku and Hc in these films is not a simple one since features such as grain boundaries, for example, can have a strong influence on Hc but affect Ku only in a secondary manner. In this regard grain boundary separation provides a way to minimize the grain-to-grain magnetic coupling which is known to result in larger coercivities and improved SNR as has been discussed extensively in the literature for conventional longitudinal recording media.We present here results from the deposition of two Pt/Co/Tb multilayers (A and B) which show significant differences in their coercive fields.

Download Full-text

Advances in Stem Instrumentation for Biology

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100180562 ◽

1990 ◽

Vol 48 (1) ◽

pp. 362-363

Author(s):

J. S. Wall

Keyword(s):

Scanning Transmission Electron Microscope ◽

Carbon Films ◽

Specimen Preparation ◽

Material Deposition ◽

Active User ◽

Percent Improvement ◽

Scanning Transmission ◽

The Moment ◽

Film Substrate ◽

High Level

The forte of the Scanning transmission Electron Microscope (STEM) is high resolution imaging with high contrast on thin specimens, as demonstrated by visualization of single heavy atoms. of equal importance for biology is the efficient utilization of all available signals, permitting low dose imaging of unstained single molecules such as DNA.Our work at Brookhaven has concentrated on: 1) design and construction of instruments optimized for a narrow range of biological applications and 2) use of such instruments in a very active user/collaborator program. Therefore our program is highly interactive with a strong emphasis on producing results which are interpretable with a high level of confidence.The major challenge we face at the moment is specimen preparation. The resolution of the STEM is better than 2.5 A, but measurements of resolution vs. dose level off at a resolution of 20 A at a dose of 10 el/A2 on a well-behaved biological specimen such as TMV (tobacco mosaic virus). To track down this problem we are examining all aspects of specimen preparation: purification of biological material, deposition on the thin film substrate, washing, fast freezing and freeze drying. As we attempt to improve our equipment/technique, we use image analysis of TMV internal controls included in all STEM samples as a monitor sensitive enough to detect even a few percent improvement. For delicate specimens, carbon films can be very harsh-leading to disruption of the sample. Therefore we are developing conducting polymer films as alternative substrates, as described elsewhere in these Proceedings. For specimen preparation studies, we have identified (from our user/collaborator program ) a variety of “canary” specimens, each uniquely sensitive to one particular aspect of sample preparation, so we can attempt to separate the variables involved.

Download Full-text

Traumatic Brain Injury: A Trauma Surgeon's Perspective

Perspectives on Neurophysiology and Neurogenic Speech and Language Disorders ◽

10.1044/nnsld22.3.82 ◽

2012 ◽

Vol 22 (3) ◽

pp. 82-89

Author(s):

Oscar D. Guillamondegui

Keyword(s):

Traumatic Brain Injury ◽

Brain Injury ◽

Multidisciplinary Approach ◽

Trauma Team ◽

The United States ◽

Long Term Outcomes ◽

Term Care ◽

Injured Brain ◽

The Moment

Traumatic brain injury (TBI) is a serious epidemic in the United States. It affects patients of all ages, race, and socioeconomic status (SES). The current care of these patients typically manifests after sequelae have been identified after discharge from the hospital, long after the inciting event. The purpose of this article is to introduce the concept of identification and management of the TBI patient from the moment of injury through long-term care as a multidisciplinary approach. By promoting an awareness of the issues that develop around the acutely injured brain and linking them to long-term outcomes, the trauma team can initiate care early to alter the effect on the patient, family, and community. Hopefully, by describing the care afforded at a trauma center and by a multidisciplinary team, we can bring a better understanding to the armamentarium of methods utilized to treat the difficult population of TBI patients.

Download Full-text