Treatment of motor oil-contaminated water via sorption onto natural organic lignocellulosic waste: thermodynamics, kinetics, isotherm, recycling, and reuse

2021 ◽  
Author(s):  
Kovo G. Akpomie ◽  
Jeanet Conradie
Keyword(s):  
Contaminated Water ◽  
Motor Oil ◽  
Lignocellulosic Waste

Development of thickened semi-synthetic engine oil M-5z / 20 AERO for four-stroke gasoline engines aircraft piston of unmanned aerial vehicles (UAVs)

2020 ◽  
Vol 06 ◽  
pp. 44-47
Author(s):  
A.A. Moykin ◽  
◽  
A.S. Medzhibovsky ◽  
S.A. Kriushin ◽  
M.V. Seleznev ◽  
...  
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Engine Oil ◽  
Motor Oil ◽  
Gasoline Engines ◽  
State Research Institute ◽  
Technical Requirements ◽  
Aerial Vehicles ◽  
State Research ◽  
Industrial Batch ◽  
The Russian Federation

Nowadays, the creation of remotely-piloted aerial vehicles for various purposes is regarded as one of the most relevant and promising trends of aircraft development. FAU "25 State Research Institute of Chemmotology of the Ministry of Defense of the Russian Federation" have studied the operation features of aircraft piston engines and developed technical requirements for motor oil for piston four-stroke UAV engines, as well as a new engine oil M-5z/20 AERO in cooperation with NPP KVALITET, LLC. Based on the complex of qualification tests, the stated operational properties of the experimental-industrial batch of M-5z/20 AERO oil are generally confirmed.

Parameters Affecting Dye Adsorption - Using Graphene Coated Sand (GSC)

2018 ◽  
Vol 4 (02) ◽  
Author(s):  
Seroor Atalah Khaleefa Alia ◽  
Dr. Mohammed Ibrahimb ◽  
Hussein Ali Hussein
Keyword(s):  
Heavy Metals ◽  
Contact Time ◽  
Organic Dyes ◽  
Low Cost ◽  
Dye Adsorption ◽  
Contaminated Water ◽  
Maximum Adsorption Capacity ◽  
Engineering Designs ◽  
Heavy Metals Ions ◽  
Coated Sand

Adsorption is most commonly applied process for the removal of pollutants such as dyes and heavy metals ions from wastewater. The present work talks about preparing graphenic material attached sand grains called graphene sand composite (GSC) by using ordinary sugar as a carbon source. Physical morphology and chemical composition of GSC was examined by using (FTIR, SEM, EDAX and XRD). Efficiency of GSC in the adsorption of organic dyes from water was investigated using reactive green dye with different parameters such as (ph, temperature, contact time and dose). Adsorption isotherm was also studied and the results showed that the maximum adsorption capacity of dye is 28.98 mg/g. This fast, low-cost process can be used to manufacture commercial filters to treat contaminated water using appropriate engineering designs.

Energetic properties of peat saturated with petroleum products

2020 ◽  
Vol 13 (2) ◽  
pp. 105-109
Author(s):  
E. S. Dremicheva
Keyword(s):  
Crude Oil ◽  
Diesel Fuel ◽  
Energy Use ◽  
Experimental Studies ◽  
Calorific Value ◽  
Petroleum Products ◽  
Ash Content ◽  
Motor Oil ◽  
Initial Sample

This paper presents a method of sorption using peat for elimination of emergency spills of crude oil and petroleum products and the possibility of energy use of oil-saturated peat. The results of assessment of the sorbent capacity of peat are presented, with waste motor oil and diesel fuel chosen as petroleum products. Natural peat has been found to possess sorption properties in relation to petroleum products. The sorbent capacity of peat can be observed from the first minutes of contact with motor oil and diesel fuel, and significantly depends on their viscosity. For the evaluation of thermal properties of peat saturated with petroleum products, experimental studies have been conducted on determination of moisture and ash content of as-fired fuel. It is shown that adsorbed oil increases the moisture and ash content of peat in comparison with the initial sample. Therefore, when intended for energy use, peat saturated with petroleum products is to be subjected to additional drying. Simulation of net calorific value has been performed based on the calorific values of peat and petroleum products with different ratios of petroleum product content in peat and for a saturated peat sample. The obtained results are compared with those of experiments conducted in a calorimetric bomb and recalculated for net calorific value. A satisfactory discrepancy is obtained, which amounts to about 12%. Options have been considered providing for combustion of saturated peat as fuel (burnt per se and combined with a solid fuel) and processing it to produce liquid, gaseous and solid fuels. Peat can be used to solve environmental problems of elimination of emergency spills of crude oil and petroleum products and as an additional resource in solving the problem of finding affordable energy.

DISINFECTION OF E. coli CONTAMINATED WATER USING TUNGSTEN TRIOXIDE-BASED PHOTOELECTROCATALYSIS

2016 ◽  
Vol 15 (4) ◽  
pp. 899-903 ◽  
Author(s):  
Donald E. Macphee ◽  
Efetobor Scott-Emuakpor ◽  
Graeme I. Paton ◽  
Malcolm J. Todd
Keyword(s):  
Tungsten Trioxide ◽  
Contaminated Water ◽  
E Coli

Legionnaire’s disease and COVID-19: Could Legionella be acting in conjunction with the Corona virus to aggravate the COVID-19 disease?

2020 ◽  
Author(s):  
Andrew John PENDERY
Keyword(s):  
Drinking Water ◽  
Air Conditioning ◽  
Water Systems ◽  
Contaminated Water ◽  
Cooling Towers ◽  
Age Group ◽  
Corona Virus ◽  
The Usa ◽  
Legionnaire's Disease ◽  
Legionnaire’S Disease

There are some striking similarities between Legionnaire’s disease and COVID-19. Thesymptoms, age group and sex at risk are identical. The geographical distribution of both diseases is similar in Europe overall, and within the USA, France and Italy. The environmental distributions are also similar. However Legionnaire’s disease is caused by Legionella bacteria while COVID-19 is caused by the Corona virus. Whereas COVID-19 is contagious, Legionnaire’s disease is environmental. Legionella bacteria are commonly found in drinking water systems and near air conditioning cooling towers. Legionnaire’sdisease is caught by inhaling contaminated water droplets. The Legionella bacteria does not spread person to person and only causes disease if it enters the lungs.Could the Corona virus be making it easier for Legionella bacteria to enter the lungs?

Use of agro-waste (Musa paradisiaca peels) as a sustainable biosorbent for toxic metal ions removal from contaminated water

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Equilibrium Concentration ◽  
Ion Concentration ◽  
Contaminated Water ◽  
Musa Paradisiaca ◽  
Percentage Removal ◽  
Adsorbent Dose

A study of removal of heavy metal ions from heavy metal contaminated water using agro-waste was carried out with Musa paradisiaca peels as test adsorbent. The study was carried by adding known quantities of lead (II) ions and cadmium (II) ions each and respectively into specific volume of water and adding specific dose of the test adsorbent into the heavy metal ion solution, and the mixture was agitated for a specific period of time and then the concentration of the metal ion remaining in the solution was determined with Perkin Elmer Atomic absorption spectrophotometer model 2380. The effect of contact time, initial adsorbate concentration, adsorbent dose, pH and temperature were considered. From the effect of contact time results equilibrium concentration was established at 60minutes. The percentage removal of these metal ions studied, were all above 90%. Adsorption and percentage removal of Pb2+ and Cd2+ from their aqueous solutions were affected by change in initial metal ion concentration, adsorbent dose pH and temperature. Adsorption isotherm studies confirmed the adsorption of the metal ions on the test adsorbent with good mathematical fits into Langmuir and Freundlich adsorption isotherms. Regression correlation (R2) values of the isotherm plots are all positive (>0.9), which suggests too, that the adsorption fitted into the isotherms considered.

Sign in / Sign up

Export Citation Format

Share Document