scholarly journals Advanced Strategies to Improve Performances of Molybdenum-Based Gas Sensors

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Angga Hermawan ◽  
Ni Luh Wulan Septiani ◽  
Ardiansyah Taufik ◽  
Brian Yuliarto ◽  
Suyatman ◽  
...  
Keyword(s):  
High Performance ◽  
Gas Sensing ◽  
Low Cost ◽  
Molybdenum Oxides ◽  
Exhaled Breath ◽  
Sensor Applications ◽  
Theoretical Investigations ◽  
Gas Sensing Properties ◽  
Future Challenges ◽  
Made In

AbstractMolybdenum-based materials have been intensively investigated for high-performance gas sensor applications. Particularly, molybdenum oxides and dichalcogenides nanostructures have been widely examined due to their tunable structural and physicochemical properties that meet sensor requirements. These materials have good durability, are naturally abundant, low cost, and have facile preparation, allowing scalable fabrication to fulfill the growing demand of susceptible sensor devices. Significant advances have been made in recent decades to design and fabricate various molybdenum oxides- and dichalcogenides-based sensing materials, though it is still challenging to achieve high performances. Therefore, many experimental and theoretical investigations have been devoted to exploring suitable approaches which can significantly enhance their gas sensing properties. This review comprehensively examines recent advanced strategies to improve the nanostructured molybdenum-based material performance for detecting harmful pollutants, dangerous gases, or even exhaled breath monitoring. The summary and future challenges to advance their gas sensing performances will also be presented.

scholarly journals Enhancing Formaldehyde Selectivity of SnO2 Gas Sensors with the ZSM-5 Modified Layers

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 3947
Author(s):  
Wei Wang ◽  
Qinyi Zhang ◽  
Ruonan Lv ◽  
Dong Wu ◽  
Shunping Zhang
Keyword(s):  
Gas Sensors ◽  
Indoor Air ◽  
High Performance ◽  
Screen Printing ◽  
Gas Sensing ◽  
Oxide Semiconductors ◽  
Screen Printing Method ◽  
Gas Sensing Properties ◽  
Zeolite Films ◽  
Insufficient Knowledge

High performance formaldehyde gas sensors are widely needed for indoor air quality monitoring. A modified layer of zeolite on the surface of metal oxide semiconductors results in selectivity improvement to formaldehyde as gas sensors. However, there is insufficient knowledge on how the thickness of the zeolite layer affects the gas sensing properties. In this paper, ZSM-5 zeolite films were coated on the surface of the SnO2 gas sensors by the screen printing method. The thickness of ZSM-5 zeolite films was controlled by adjusting the numbers of screen printing layers. The influence of ZSM-5 film thickness on the performance of ZSM-5/SnO2 gas sensors was studied. The results showed that the ZSM-5/SnO2 gas sensors with a thickness of 19.5 μm greatly improved the selectivity to formaldehyde, and reduced the response to ethanol, acetone and benzene at 350 °C. The mechanism of the selectivity improvement to formaldehyde of the sensors was discussed.

Star-Fruit-Shaped CuO Structures for High Performance Ethanol Gas Sensor Device

2021 ◽  
Vol 13 (4) ◽  
pp. 724-733
Author(s):  
Ahmad Umar ◽  
Ahmed A. Ibrahim ◽  
Rajesh Kumar ◽  
Hassan Algadi ◽  
Hasan Albargi ◽  
...  
Keyword(s):  
Gas Sensor ◽  
High Performance ◽  
Crystal Size ◽  
Gas Sensing ◽  
Sensor Applications ◽  
Sensor Device ◽  
Star Fruit ◽  
Micro Structures ◽  
Gas Response ◽  
Structural Crystal

In this paper, star-fruit-shaped CuO microstructures were hydrothermally synthesized and subsequently characterized through different techniques to understand morphological, compositional, structural, crystal, optical and vibrational properties. The formation of star-fruit-shaped structures along with some polygonal and spherical nanostructures was confirmed by FESEM analysis. XRD data and Raman spectrum confirmed the monoclinic tenorite crystalline phase of the CuO with crystal size 17.61 nm. Star-fruit-shaped CuO microstructures were examined for ethanol gas sensing behavior at various operating temperatures and concentrations. The gas response of 135% was observed at the optimal temperature of 225 °C. Due to excellent selectivity, stability and re-usability, the as-fabricated sensor based on star-fruit-shaped CuO micro-structures may be explored for future toxic gas sensor applications.

Bio-green synthesis of Ni-doped tin oxide nanoparticles and its influence on gas sensing properties

RSC Advances ◽  
2015 ◽  
Vol 5 (89) ◽  
pp. 72849-72856 ◽  
Author(s):  
Ketan P. Gattu ◽  
Kalyani Ghule ◽  
Anil A. Kashale ◽  
V. B. Patil ◽  
D. M. Phase ◽  
...  
Keyword(s):  
Green Synthesis ◽  
Tin Oxide ◽  
Gas Sensing ◽  
Low Cost ◽  
Environmentally Friendly ◽  
Cost Effective ◽  
Oxide Nanoparticles ◽  
Sensing Properties ◽  
Gas Sensing Properties ◽  
Tin Oxide Nanoparticles

Using a novel, cost-effective and environmentally friendly biosynthesis method, Ni-doped SnO2 nanoparticles have been synthesized. Gas sensing results suggest that the Ni-dopant is a promising additive to fabricate low cost SnO2 based sensors.

Hierarchically designed ZnO nanostructure based high performance gas sensors

RSC Advances ◽  
2014 ◽  
Vol 4 (90) ◽  
pp. 49521-49528 ◽  
Author(s):  
Mohammad R. Alenezi ◽  
T. H. Alzanki ◽  
A. M. Almeshal ◽  
A. S. Alshammari ◽  
M. J. Beliatis ◽  
...  
Keyword(s):  
Gas Sensors ◽  
High Performance ◽  
Gas Sensing ◽  
High Surface ◽  
Hierarchical Nanostructures ◽  
Sensing Properties ◽  
Zno Nanostructure ◽  
Gas Sensing Properties

Enhanced gas sensing properties of ZnO were achieved by designing hierarchical nanostructures with high surface-to-volume ratios and more exposed polar facets.

Fabrication of a Carbon Nanotube Gas Sensor Microelectrodes and its Application for Ammonia Detection

2013 ◽  
Vol 431 ◽  
pp. 306-311
Author(s):  
Xiang Tao Ran ◽  
Zhi Wang ◽  
Li Yang
Keyword(s):  
Gas Sensors ◽  
High Performance ◽  
Gas Sensing ◽  
Structural Parameters ◽  
Low Cost ◽  
Manufacturing Method ◽  
Multi Walled Carbon Nanotubes ◽  
Ammonia Detection ◽  
Low Cost Manufacturing ◽  
Walled Carbon Nanotubes

With the increasing needs for high-performance gas sensors in industrial production, environmental monitoring and so on, the research on gas sensors is becoming more and more important. In this paper, the electric field intensity distribution simulation process of the interdigital microelectrodes (IMEs) is discussed in details to get the proper electrode structural parameters. The IMEs on the ITO surface with a minimum gap of about 4μm are achieved by lithography, which provides a reliable, low-cost manufacturing method. Sensitive components are made of the multi-walled carbon nanotubes modified materials. The gas-sensing property of the sensor is detected for ammonia. The experiment result shows that the performance of the nanomodified sensor is obviously improved.

Defect-Controlled Gas Sensing Property of Nanostructured ZnO Films

2015 ◽  
Vol 814 ◽  
pp. 54-59
Author(s):  
Yong Qin Chang ◽  
Chang Jing Shao ◽  
Nan Jiang ◽  
Yan Jun Ma ◽  
Shi Qi Wang ◽  
...  
Keyword(s):  
Gas Sensor ◽  
Oxygen Vacancies ◽  
Gas Sensing ◽  
Chemical Vapor ◽  
Zno Films ◽  
Sensor Applications ◽  
Cvd Method ◽  
Short Recovery Time ◽  
Gas Sensing Properties ◽  
Ethanol Sensing

Nanostructured ZnO films were fabricated by chemical vapor deposition (CVD) method with different Sn source concentrations for ethanol sensing application. It was found that the morphology of the ZnO films were obviously affected by Sn concentration, while no any Sn signals were detected in the films. The response of the nanostructured ZnO films increases with the increase of ethanol concentrations, and the S2 sample displays the highest sensitivity. Thephotoluminescence spectra show that more oxygen vacancies exist in the S2 sample than the other samples, which reveals that oxygen vacancies may play a great role to improve the gas sensing properties of the ZnO films.A possible sensing mechanism was proposed to explain these phenomena.This work provides a very simple and efficient method to prepare ZnO gas sensor, its high response and short recovery time are also a merit for the ZnO films used in gas sensor applications.

ZnO-Based Gas Sensors Prepared by EPD and Hydrothermal Growth

2015 ◽  
Vol 654 ◽  
pp. 94-98 ◽  
Author(s):  
Roman Yatskiv ◽  
María Verde ◽  
Jan Grym
Keyword(s):  
Gas Sensors ◽  
Room Temperature ◽  
Gas Sensing ◽  
Low Cost ◽  
Zno Nanorods ◽  
Zno Films ◽  
Nanorod Arrays ◽  
Zno Nanorod Arrays ◽  
Current Voltage ◽  
Gas Sensing Properties

Arrays of vertically well aligned ZnO nanorods (NRs) were prepared on nanostructured ZnO films using a low temperature hydrothermal method. We propose the use of the low cost, environmentally friendly electrophoretic deposition technique (EPD) as seeding procedure, which allows the obtaining of homogeneous, well oriented nanostructured ZnO thin films. ZnO nanorod arrays were covered with graphite in order to prepare graphite/ZnO NRs junctions. These nanostructured junctions showed promising current-voltage rectifying characteristics and gas sensing properties at room temperature.

Nanophotonics silicon solar cells: status and future challenges

2015 ◽  
Vol 4 (4) ◽  
Author(s):  
Baohua Jia
Keyword(s):  
Solar Cells ◽  
High Performance ◽  
Large Scale ◽  
High Efficiency ◽  
Low Cost ◽  
Silicon Solar Cells ◽  
Solar Energy Harvesting ◽  
Material Usage ◽  
Future Challenges ◽  
Light Management

AbstractLight management plays an important role in high-performance solar cells. Nanostructures that could effectively trap light offer great potential in improving the conversion efficiency of solar cells with much reduced material usage. Developing low-cost and large-scale nanostructures integratable with solar cells, thus, promises new solutions for high efficiency and low-cost solar energy harvesting. In this paper, we review the exciting progress in this field, in particular, in the market, dominating silicon solar cells and pointing out challenges and future trends.

scholarly journals Hydrothermal Synthesis and Gas Sensing of Monoclinic MoO3 Nanosheets

Nanomaterials ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 891
Author(s):  
Teodóra Nagyné-Kovács ◽  
Levente Studnicka ◽  
István Endre Lukács ◽  
Krisztina László ◽  
Pawel Pasierb ◽  
...  
Keyword(s):  
Phase Transformation ◽  
Reaction Time ◽  
Hydrothermal Synthesis ◽  
Cetyltrimethylammonium Bromide ◽  
Gas Sensing ◽  
Molybdenum Oxides ◽  
Reaction Parameters ◽  
Gas Sensing Properties ◽  
Two Phases ◽  
First Time

Effects of different reaction parameters in the hydrothermal synthesis of molybdenum oxides (MoO3) were investigated and monoclinic (β-) MoO3 was prepared hydrothermally for the first time. Various temperatures (90/210 °C, and as a novelty 240 °C) and durations (3/6 h) were used. At 240 °C, cetyltrimethylammonium bromide (CTAB) and CrCl3 additives were also tested. Both the reaction temperatures and durations played a significant role in the formation of the products. At 90 °C, h-MoO3 was obtained, while at 240 °C the orthorhombic (α-) MoO3 formed with hexagonal rod-like and nanofibrous morphology, respectively. The phase transformation between these two phases was observed at 210 °C. At this temperature, the 3 h reaction time resulted in the mixture of h- and α-MoO3, but 6 h led to pure α-MoO3. With CTAB the product was bare o-MoO3, however, when CrCl3 was applied, pure metastable m-MoO3 formed with the well-crystallized nanosheet morphology. The gas sensing of the MoO3 polymorphs was tested to H2, which was the first such gas sensing study in the case of m-WO3. Monoclinic MoO3 was found to be more sensitive in H2 sensing than o-MoO3. This initial gas sensing study indicates that m-MoO3 has promising gas sensing properties and this MoO3 polymorph is promising to be studied in detail in the future.

Sign in / Sign up

Export Citation Format

Share Document