Effect of the intake port flow direction on the stability and characteristics of the in-cylinder flow field of a small motorcycle engine

2021 ◽  
Vol 288 ◽  
pp. 116659
Author(s):  
Bambang Wahono ◽  
Ardhika Setiawan ◽  
Ocktaeck Lim
Keyword(s):  
Flow Field ◽  
Flow Direction ◽  
Intake Port ◽  
The Stability ◽  
Cylinder Flow ◽  
Motorcycle Engine

Numerical and Experimental Analysis of the Intake Flow in a High Performance Four-Stroke Motorcycle Engine: Influence of the Two-Equation Turbulence Models

2007 ◽  
Vol 129 (4) ◽  
pp. 1095-1105 ◽  
Author(s):  
Angelo Algieri ◽  
Sergio Bova ◽  
Carmine De Bartolo ◽  
Alessandra Nigro
Keyword(s):  
Flow Field ◽  
Combustion Chamber ◽  
High Performance ◽  
Laser Doppler Anemometry ◽  
Fluid Dynamic ◽  
Turbulence Models ◽  
Mean Flow ◽  
Intake System ◽  
Cylinder Flow ◽  
Motorcycle Engine

An experimental and numerical analysis of the intake system of a production high performance four-stroke motorcycle engine was carried out. The aim of the work was to characterize the fluid dynamic behavior of the engine during the intake phase and to evaluate the capability of the most commonly used two-equation turbulence models to reproduce the in-cylinder flow field for a very complex engine head. Pressure and mass flow rates were measured on a steady-flow rig. Furthermore, velocity measurements were obtained within the combustion chamber using laser Doppler anemometry (LDA). The experimental data were compared to the numerical results using four two-equation turbulence models (standard k-ε, realizable k-ε, Wilcox k-ω, and SST k-ω models). All the investigated turbulence models well predicted the global performances of the intake system and the mean flow structure inside the cylinder. Some differences between measurements and computations were found close to the cylinder head while an improving agreement was evident moving away from the engine head. Furthermore, the Wilcox k-ω model permitted the flow field inside the combustion chamber of the engine to be reproduced and the overall angular momentum of the flux with respect to the cylinder axis to be quantified more properly.

A study on in-cylinder flow field of a 125cc motorcycle engine at low engine speeds

2019 ◽  
Vol 33 (9) ◽  
pp. 4477-4494 ◽  
Author(s):  
Bambang Wahono ◽  
Yanuandri Putrasari ◽  
Ocktaeck Lim
Keyword(s):  
Flow Field ◽  
Cylinder Flow ◽  
Motorcycle Engine

Stability of slender inverted flags and rods in uniform steady flow

2016 ◽  
Vol 809 ◽  
pp. 873-894 ◽  
Author(s):  
John E. Sader ◽  
Cecilia Huertas-Cerdeira ◽  
Morteza Gharib
Keyword(s):  
Multiple Equilibria ◽  
Complex Dynamics ◽  
Flow Direction ◽  
Flow Speed ◽  
Uniform Flow ◽  
Biological Phenomena ◽  
Cantilever Length ◽  
The Stability ◽  
Elastic Sheets ◽  
Clamped Edge

Cantilevered elastic sheets and rods immersed in a steady uniform flow are known to undergo instabilities that give rise to complex dynamics, including limit cycle behaviour and chaotic motion. Recent work has examined their stability in an inverted configuration where the flow impinges on the free end of the cantilever with its clamped edge downstream: this is commonly referred to as an ‘inverted flag’. Theory has thus far accurately captured the stability of wide inverted flags only, i.e. where the dimension of the clamped edge exceeds the cantilever length; the latter is aligned in the flow direction. Here, we theoretically examine the stability of slender inverted flags and rods under steady uniform flow. In contrast to wide inverted flags, we show that slender inverted flags are never globally unstable. Instead, they exhibit bifurcation from a state that is globally stable to multiple equilibria of varying stability, as flow speed increases. This theory is compared with new and existing measurements on slender inverted flags and rods, where excellent agreement is observed. The findings of this study have significant implications to investigations of biological phenomena such as the motion of leaves and hairs, which can naturally exhibit a slender geometry with an inverted configuration.

Modeling and Analysis of Anti-Icing Power of Aircraft Engine Inlet Based on Symmetric Algorithms

2021 ◽  
Vol 7 (6) ◽  
pp. 6361-6374
Author(s):  
Hui Peng
Keyword(s):  
Flow Field ◽  
Evaluation Method ◽  
Learning Strategy ◽  
Aircraft Engine ◽  
Absolute Error ◽  
Civil Aviation ◽  
Particle Swarm Algorithm ◽  
Intake Port ◽  
Experimental Conditions ◽  
Modeling And Analysis

To evaluate the capability of engine inlet, inlet components and power plant anti ICER under low temperature, this paper introduces the evaluation method of anti icing system for civil aviation engine room, and analyzes the anti icing power of the aircraft intake based on the symmetric algorithm. The realizable k-cube model and wall function method are used to analyze the flow field in the inlet of an aircraft engine. Based on the analysis of the flow field of the intake port of an aircraft engine, the anti ice power of the intake port is calculated according to the heat balance relationship of the intake port surface. The symmetrical particle swarm algorithm is adopted to optimize the calculation process of inlet anti-ice power, and the particle wide area learning strategy is used to promote the calculation of inlet anti-ice power. In this way, the computational complexity is significantly reduce and the accuracy of the power analysis of the inlet anti-ice is enhanced. The simulation results show that the absolute error of the proposed method is less than 1% in 1000 iterations. Through the analysis of the surface temperature changes of the inlet deflector under different experimental conditions, it can be known that the method can effectively analyze the anti-icing power of aircraft engine inlet.

Numerical Analysis of Swirl Control Strategies in a Four Valve HSDI Diesel Engine

2004 ◽  
Author(s):  
S. Fontanesi ◽  
E. Mattarelli ◽  
L. Montorsi
Keyword(s):  
Flow Field ◽  
Control Strategies ◽  
Cfd Simulations ◽  
Full Load ◽  
Partial Load ◽  
Swirl Intensity ◽  
Port Design ◽  
Current Production ◽  
Hsdi Diesel Engine ◽  
Cylinder Flow

Recent four value HSDI Diesel engines are able to control the swirl intensity, in order to enhance the in-cylinder flow field at partial load without decreasing breathing capabilities at full load. Making reference to a current production engine, the purpose of this paper is to envestiage the influence of port design and flow-control strategies on both engine permeability and in-cylinder flow field. Using previously validated models, 3-D CFD simulations of the intake and compression strokes are performed in order to predict the in-cylinder flow patterns originated by the different configurations. The comparison between the two configurations in terms of airflow at full load indicates that Geometry 2 can trap 3.03% more air than Geometry 1, while the swirl intensity at IVC is reduced (−30%). The closure of one intake valve (the left one) is very effective to enhance the swirl intensity at partial load: the Swirl Ratio at IVC passes from 0.7 to 2.6 for Geometry 1, while for Geometry 2 it varies from 0.4 to 2.9.

Bifurcation and stability analysis of stagnation points for an asymmetric peristaltic transport

2020 ◽  
Vol 98 (2) ◽  
pp. 172-182 ◽  
Author(s):  
Kaleem Ullah ◽  
Nasir Ali
Keyword(s):  
Flow Field ◽  
Amplitude Ratio ◽  
Nonlinear Differential Equations ◽  
Global Bifurcation ◽  
Flow Region ◽  
Peristaltic Transport ◽  
Trapping Region ◽  
Long Wavelength ◽  
Stagnation Points ◽  
The Stability

This paper investigates the streamline topologies and stability of stagnation points and their bifurcations for an asymmetric peristaltic flow. The asymmetry of channel is due to the propagation of peristaltic waves with different phases and amplitudes on the flexible channel walls. An exact analytic solution of the flow problem subject to the constraints of low Reynolds number and long wavelength is obtained in wave frame of reference moving with wave velocity. A system of nonlinear differential equations is established to locate and classify the stagnation points in the flow domain. Different flow situations, manifested in the flow field, are categorized as: backward flow, trapping, and augmented flow. The transition from one situation to the other corresponds to bifurcation, which is explored graphically through local and global bifurcation diagrams. This analysis discloses the stability status of stagnation points and ranges of involved parameters in which various flow conditions appear in the flow field. It is concluded that the trapping in an asymmetric peristaltic transport can be reduced by increasing the phase difference of the channel walls. It is also found that the augmented flow region shrinks and the trapping region expands by increasing the amplitude ratio of the channel walls.

Numerical Comparative Analysis of In-Cylinder Tumble Flow Structures in Small PFI Engines Equipped by Heads Having Different Shapes and Squish Areas

2012 ◽  
Author(s):  
Stefania Falfari ◽  
Gian Marco Bianchi ◽  
Luca Nuti
Keyword(s):  
Flow Structure ◽  
Mutual Influence ◽  
Ignition Time ◽  
Three Dimensional ◽  
Valve Lift ◽  
Spark Plug ◽  
Piston Valve ◽  
Cylinder Flow ◽  
Roof Angle ◽  
Motorcycle Engine

For increasing the thermal engine efficiency, faster combustion and low cycle-to-cycle variation are required. In PFI engines the organization of in-cylinder flow structure is thus mandatory for achieving increased efficiency. In particular the formation of a coherent tumble vortex with dimensions comparable to engine stroke largely promotes proper turbulence production extending the engine tolerance to dilute/lean mixture. For motorbike and scooter applications, tumble has been considered as an effective way to further improve combustion system efficiency and to achieve emission reduction since layout and weight constraints limit the adoption of more advanced concepts. In literature chamber geometry was found to have a significant influence on bulk motion and turbulence levels at ignition time, while intake system influences mainly the formation of tumble vortices during suction phase. The most common engine parameters believed to affect in-cylinder flow structure are: 1. Intake duct angle; 2. Inlet valve shape and lift; 3. Piston shape; 4. Pent-roof angle. The present paper deals with the computational analysis of three different head shapes equipping a scooter/motorcycle engine and their influence on the tumble flow formation and breakdown, up to the final turbulent kinetic energy distribution at spark plug. The engine in analysis is a 3-valves pent-roof motorcycle engine. The three dimensional CFD simulations were run at 6500 rpm with AVL FIRE code on the three engines characterised by the same piston, valve lift, pent-roof angle and compression ratio. They differ only in head shape and squish areas. The aim of the present paper is to demonstrate the influence of different head shapes on in-cylinder flow motion, with particular care to tumble motion and turbulence level at ignition time. Moreover, an analysis of the mutual influence between tumble motion and squish motion was carried out in order to assess the role of both these motions in promoting a proper level of turbulence at ignition time close to spark plug in small 3-valves engines.

Numerical Investigation of Effect of Inlet Distortion on Compressor Flow Field and Stability

2017 ◽  
Author(s):  
HaoGuang Zhang ◽  
Kang An ◽  
Feng Tan ◽  
YanHui Wu ◽  
WuLi Chu
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Total Pressure ◽  
Tip Clearance ◽  
Numerical Work ◽  
Stall Margin ◽  
Numerical Investigations ◽  
Inlet Distortion ◽  
Compressor Rotor ◽  
The Stability

The compressor aerodynamic design is conducted under the condition of clean inlet in general, but a compressor often operates under the condition of inlet distortion in the practical application. It has been proven by a lot of experimental and numerical investigations that inlet distortion can decrease the performance and stability of compressors. The circumferential or radial distorted inlet in mostly numerical investigations is made by changing the total pressure and total temperature in the inlet ring surface of the compressors. In most of inlet distortion experiments, distorted inlets are usually created by using wire net, flashboards, barriers or the generator of rotating distortion. The fashion of generating distorted inlet for experiment is different from that for numerical simulation. Consequently, the flow mechanism of affecting the flow field and stability of a compressor with distorted inlet for experiment is partly different than that for numerical simulation. In the numerical work reported here, the inlet distortion is generated by setting some barriers in the inlet ring surface of an axial subsonic compressor rotor. Two kinds of distorted inlet are investigated to exploring the effect of distorted range on the flow field and stability of the compressor with ten-passage unsteady numerical method. The numerical results show that the inlet distortions not only degrade the total pressure and efficiency of the compressor rotor, but also decrease the stability of the rotor. The larger the range of distorted inlet is, the stronger the adverse effect is. The comprehensive stall margin for the inlet distortion of 24 degrees and 48 degrees of ten-passages is reduced about 3.35% and 5.88% respectively. The detailed analysis of the flow field in the compressor indicates that the blockage resulted from tip clearance leakage vortex (TLV) and the flow separation near the suction surfaces of some blades tip for distorted inlet is more serious than that resulted from TLV for clean inlet. Moreover, the larger the range of distorted inlet is, the larger the range of the blockage is. The analysis of unsteady flow shows that during this process, which is that one rotor blade passes through the region affected by the distorted inlet, the range of the blockage in the rotor passage increases first, then reduces, and increases last.

Measurement of the Mean Flow Field in a Smooth Rotating Channel With Coriolis and Buoyancy Effects

2017 ◽  
Author(s):  
Ruquan You ◽  
Haiwang Li ◽  
Zhi Tao ◽  
Kuan Wei
Keyword(s):  
Flow Field ◽  
Coriolis Force ◽  
Indium Tin Oxide ◽  
Buoyancy Force ◽  
Flow Direction ◽  
Density Ratio ◽  
Mean Flow ◽  
The Mean ◽  
Static Conditions ◽  
Rotating Channel

The mean flow field in a smooth rotating channel was measured by particle image velocimetry under the effect of buoyancy force. In the experiments, the Reynolds number, based on the channel hydraulic diameter (D) and the bulk mean velocity (Um), is 10000, and the rotation numbers are 0, 0.13, 0.26, 0.39, 0.52, respectively. The four channel walls are heated with Indium Tin Oxide (ITO) heater glass, making the density ratio (d.r.) about 0.1 and the maximum value of buoyancy number up to 0.27. The mean flow field was simulated on a 3D reconstruction at the position of 3.5<X/D<6.5, where X is along the mean flow direction. The effect of Coriolis force and buoyancy force on the mean flow was taken into consideration in the current work. The results show that the Coriolis force pushes the mean flow to the trailing side, making the asymmetry of the mean flow with that in the static conditions. On the leading surface, due to the effect of buoyancy force, the mean flow field changes considerably. Comparing with the case without buoyancy force, separated flow was captured by PIV on the leading side in the case with buoyancy force. More details of the flow field will be presented in this work.

Sign in / Sign up

Export Citation Format

Share Document