Effect of tetracycline on the growth and nutrient removal capacity of Chlamydomonas reinhardtii in simulated effluent from wastewater treatment plants

2016 ◽  
Vol 218 ◽  
pp. 1163-1169 ◽  
Author(s):  
Jie Li ◽  
Xiaoqian Zheng ◽  
Kaichuan Liu ◽  
Shujuan Sun ◽  
Xiaochen Li
Keyword(s):  
Wastewater Treatment ◽  
Chlamydomonas Reinhardtii ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
Removal Capacity ◽  
Simulated Effluent

Upgrading of wastewater treatment plants for nutrient removal under optimal use of existing structures

2008 ◽  
Vol 57 (9) ◽  
pp. 1437-1443 ◽  
Author(s):  
S. Winkler ◽  
M. Gasser ◽  
W. Schättle ◽  
D. Kremmel ◽  
P. Kletzmayr ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
Cost Comparison ◽  
Anaerobic Sludge ◽  
Existing Structures ◽  
Low Area ◽  
Removal Capacity ◽  
Key Factor ◽  
Operation Results

Upgrading of wastewater treatment plants under maximum use of existing structures is often an important requirement, but also useful due to a number of aspects. Because of a change in legal effluent requirements, a number of plants in Austria, typically aged 20+ years, were required to be extended. The two stage activated sludge HYBRID®-process often provides an interesting design alternative for such plant upgrades, especially in case an anaerobic sludge treatment stage already exists. It provides high nutrient removal capacity at low area demand. The latter is especially important in cases where no or very limited extension area is available making it the key factor to preserve a site for future use. Based on two full stage case studies the adaptation of the plant layout, first operation results and a synthetic cost comparison to a conventional (single stage) plant extension are given.

Upgrading Wastewater Treatment Plants for Biological Nutrient Removal

1990 ◽  
Vol 22 (7-8) ◽  
pp. 53-60 ◽  
Author(s):  
B. Rabinowitz ◽  
T. D. Vassos ◽  
R. N. Dawson ◽  
W. K. Oldham
Keyword(s):  
Wastewater Treatment ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
Design Flow ◽  
Biological Nutrient Removal ◽  
Nitrogen And Phosphorus ◽  
Conventional Activated Sludge ◽  
Recent Developments ◽  
Removal Technology ◽  
Biological Nitrogen

A brief review of recent developments in biological nitrogen and phosphorus removal technology is presented. Guidelines are outlined of how current understanding of these two removal mechanisms can be applied in the upgrading of existing wastewater treatment plants for biological nutrient removal. A case history dealing with the upgrading of the conventional activated sludge process located at Penticton, British Columbia, to a biological nutrient removal facility with a design flow of 18,200 m3/day (4.0 IMGD) is presented as a design example. Process components requiring major modification were the headworks, bioreactors and sludge handling facilities.

Nutrient Removal in Small Wastewater Treatment Plants

1990 ◽  
Vol 22 (3-4) ◽  
pp. 211-216
Author(s):  
Niels Skov Olesen
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Nutrient Removal ◽  
Phosphorus Removal ◽  
Wastewater Treatment Plants ◽  
Ferrous Sulphate ◽  
Practical Solution ◽  
Sensitive Technique ◽  
Pumping Station ◽  
Denitrification Reactor

In some areas of Denmark nutrient removal is required even for very small wastewater plants, that is down to 500 pe (pe = person equivalents). The goal for the removal is 80% removal of nitrogen and 90% removal of phosphorus, or in terms of concentrations: 8 mg nitrogen/l and 1.2 mg phosphorus/l. The inlet concentrations are typically 40 mg N/l and 10 mg P/l. The paper presents the results from two such plants with a capacity of 800 pe. Phosphorus removal is made by simultaneous precipitation with ferrous sulphate. Nitrogen removal is carried out using the recirculation method. Both plants were originally rotor aerated oxidation ditches. They have been extended with a denitrification reactor and a recirculation pumping station. At present both plants have been in activity for about 3 years and with satisfactory results. Average concentrations of nitrogen (summer) and phosphorus is 7 mg/l and 0.9 mg/l respectively. Nitrogen removal seems to be a practical solution on these small plants. It is,though, sensitive to temperature and highly oxidized rain water. Phosphorus removal seems to be an easily run and relatively non-sensitive technique at least when using simultaneous precipitation.

Experience with nutrient removal in a fixed-film system at full-scale wastewater treatment plants

1997 ◽  
Vol 36 (1) ◽  
pp. 129-137 ◽  
Author(s):  
Vibeke R. Borregaard
Keyword(s):  
Wastewater Treatment ◽  
Surface Area ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
High Specific Surface Area ◽  
Biological Nutrient Removal ◽  
Growth Processes ◽  
Total N ◽  
Attached Growth ◽  
On Line

In the upgrade of wastewater treatment plants to include biological nutrient removal the space available is often a limiting facor. It may be difficult to use conventional suspended growth processes (i.e. activated sludge) owing to the relatively large surface area required for these processes. Recent years have therefore seen a revived interest in treatment technologies using various types of attached growth processes. The “new” attached growth processes, like the Biostyr process, utilise various kinds of manufactured media, e.g. polystyrene granules, which offer a high specific surface area, and are therefore very compact. The Biostyr plants allow a combination of nitrification-denitrification and filtration in one and the same unit. The results obtained are 8 mg total N/l and an SS content normally below 10 mg/l. The plants in Denmark which have been extended with a Biostyr unit have various levels of PLC control and on-line instrumentation.

scholarly journals Biological Nutrient Removal Model No. 2 (BNRM2): a general model for wastewater treatment plants

2013 ◽  
Vol 67 (7) ◽  
pp. 1481-1489 ◽  
Author(s):  
R. Barat ◽  
J. Serralta ◽  
M. V. Ruano ◽  
E. Jiménez ◽  
J. Ribes ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Operating Conditions ◽  
Plant Performance ◽  
Biological Nutrient Removal ◽  
Nitrite Oxidizing Bacteria ◽  
Removal Model

This paper presents the plant-wide model Biological Nutrient Removal Model No. 2 (BNRM2). Since nitrite was not considered in the BNRM1, and this previous model also failed to accurately simulate the anaerobic digestion because precipitation processes were not considered, an extension of BNRM1 has been developed. This extension comprises all the components and processes required to simulate nitrogen removal via nitrite and the formation of the solids most likely to precipitate in anaerobic digesters. The solids considered in BNRM2 are: struvite, amorphous calcium phosphate, hidroxyapatite, newberite, vivianite, strengite, variscite, and calcium carbonate. With regard to nitrogen removal via nitrite, apart from nitrite oxidizing bacteria two groups of ammonium oxidizing organisms (AOO) have been considered since different sets of kinetic parameters have been reported for the AOO present in activated sludge systems and SHARON (Single reactor system for High activity Ammonium Removal Over Nitrite) reactors. Due to the new processes considered, BNRM2 allows an accurate prediction of wastewater treatment plant performance in wider environmental and operating conditions.

Experiences with computer simulation at two large wastewater treatment plants in northern Poland

2002 ◽  
Vol 45 (6) ◽  
pp. 209-218 ◽  
Author(s):  
J. Makinia ◽  
M. Swinarski ◽  
E. Dobiegala
Keyword(s):  
Computer Simulation ◽  
Wastewater Treatment ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
Biological Nutrient Removal ◽  
Model Parameters ◽  
Total N ◽  
Northern Poland ◽  
Model Predictions ◽  
Steady State Simulation

Mathematical modelling and computer simulation have became a useful tool in evaluating the operation of wastewater treatment plants (WWTPs) in terms of nutrient removal capability. In this study, steady-state simulation results for two large biological nutrient removal WWTPs are presented. The plants are located in two neighbouring cities Gdansk and Gdynia in northern Poland. Simulations were performed using a pre-compiled model and layouts (MUCT and Johannesburg processes) implemented in the GPS-X simulation package. The monthly average values of conventional parameters, such as COD, Total Suspended Solids, total N, N-NH4+, P-PO4− were used as input data. The measured effluent concentrations of COD, N-NH4+, N-NO3− and P-PO4− as well as reactor MLSS were compared with model predictions. During calibration, performed from the process engineering perspective, default values of only five model parameters were changed. The opportunities for further applications of such models in municipal WWTPs are discussed.

Innovative low cost procedure for nutrient removal as an integrated element of a decentralised water management concept for rural areas

2001 ◽  
Vol 44 (1) ◽  
pp. 105-112 ◽  
Author(s):  
M. Burde ◽  
F. Rolf ◽  
F. Grabowski
Keyword(s):  
Wastewater Treatment ◽  
Nutrient Removal ◽  
Rural Areas ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
Low Cost ◽  
Fixed Bed ◽  
Extreme Rainfall ◽  
Fixed Bed Reactor ◽  
Soil Zone

The absence of large rivers with rather high niveau of self purifying effect in parts of east Germany leads to a discharging of the effluent of wastewater treatment plants into the groundwater in many cases. One useful consequence is the idea of realisation of decentralised measures and concepts in urban water resources management concerning municipal wastewater as well as rainfall, precipitation. At the same time, only the upper soil zone - a few decimetres - is water - saturated and thus discharge effective, even when extreme rainfall takes place. Underneath, however, there generally exists an unsaturated soil zone, which is up to now a rather unexplored retardation element of the hydrologic- and substrate-cycle. Nutrient removal in small wastewater treatment plants that are emptying into ground waters is often beneficial. The presented studies optimised an inexpensive method of subsequent enhanced wastewater treatment. The developed reactor is similar to a concentrated subsoil passage. The fixed bed reactor is divided in two sections to achieve aerobic and anoxic conditions for nitrification/denitrification processes. To enhance phosphorus removal, ferrous particles are put into the aerobic zone. Two series of column tests were carried out and a technical pilot plant was built to verify the efficiency of the process. The results show that this method can be implemented successfully.

scholarly journals The Microbial Database for Danish wastewater treatment plants with nutrient removal (MiDas-DK) – a tool for understanding activated sludge population dynamics and community stability

2013 ◽  
Vol 67 (11) ◽  
pp. 2519-2526 ◽  
Author(s):  
A. T. Mielczarek ◽  
A. M. Saunders ◽  
P. Larsen ◽  
M. Albertsen ◽  
M. Stevenson ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
Amplicon Sequencing ◽  
Temporal Variations ◽  
Full Scale ◽  
16S Rrna Amplicon Sequencing ◽  
Specific Factors ◽  
Operational Data

Since 2006 more than 50 Danish full-scale wastewater treatment plants with nutrient removal have been investigated in a project called ‘The Microbial Database for Danish Activated Sludge Wastewater Treatment Plants with Nutrient Removal (MiDas-DK)’. Comprehensive sets of samples have been collected, analyzed and associated with extensive operational data from the plants. The community composition was analyzed by quantitative fluorescence in situ hybridization (FISH) supported by 16S rRNA amplicon sequencing and deep metagenomics. MiDas-DK has been a powerful tool to study the complex activated sludge ecosystems, and, besides many scientific articles on fundamental issues on mixed communities encompassing nitrifiers, denitrifiers, bacteria involved in P-removal, hydrolysis, fermentation, and foaming, the project has provided results that can be used to optimize the operation of full-scale plants and carry out trouble-shooting. A core microbial community has been defined comprising the majority of microorganisms present in the plants. Time series have been established, providing an overview of temporal variations in the different plants. Interestingly, although most microorganisms were present in all plants, there seemed to be plant-specific factors that controlled the population composition thereby keeping it unique in each plant over time. Statistical analyses of FISH and operational data revealed some correlations, but less than expected. MiDas-DK (www.midasdk.dk) will continue over the next years and we hope the approach can inspire others to make similar projects in other parts of the world to get a more comprehensive understanding of microbial communities in wastewater engineering.

Sign in / Sign up

Export Citation Format

Share Document