scholarly journals Biorenewable, Transparent, and Oxygen/Moisture Barrier Nanocellulose/Nanochitin-Based Coating on Polypropylene for Food Packaging Applications

2021 ◽  
pp. 118421
Author(s):  
Hoang-Linh Nguyen ◽  
Thang Hong Tran ◽  
Lam Tan Hao ◽  
Hyeonyeol Jeon ◽  
Jun Mo Koo ◽  
...  
Keyword(s):  
Food Packaging ◽  
Moisture Barrier

scholarly journals Reinforcement of Refined and Semi-Refined Carrageenan Film with Nanocellulose

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1145 ◽  
Author(s):  
Bakti B. Sedayu ◽  
Marlene J. Cran ◽  
Stephen W. Bigger
Keyword(s):  
Thin Film ◽  
Thermal Properties ◽  
Food Packaging ◽  
Lower Cost ◽  
Polymer Structure ◽  
Mechanical And Thermal Properties ◽  
Moisture Barrier ◽  
Water Sensitivity ◽  
Reinforced Polymer

Carrageenans obtained from seaweeds can be processed into films for a range of applications including food packaging. The level of carrageenan refinement during extraction can influence the key properties, with semi-refined carrageenan (SRC) containing more impurities than the more refined carrageenan (RC). Further refinement steps, however, result in higher costs associated with the production of RC. In order to obtain a lower cost and more ecofriendly, bio-based material for food packaging applications, SRC was used in this investigation to produce a thin film reinforced with nanocellulose fibrils (NCF). Films derived from RC containing NCF were also investigated with water sensitivity and physico-mechanical and thermal properties among the properties tested. Levels of NCF were varied from 1% to 7% (w/w), and in general, the NCF reinforcement improved the overall properties of both the SRC and RC films, including the water sensitivity and moisture barrier. However, NCF inclusion in SRC film was less effective with regard to the mechanical and thermal properties compared with NCF inclusion in RC film. The enhancement in properties was attributed to the greater cohesiveness of the reinforced polymer structure and the crystalline regions formed in the structures of SRC and RC films by NCF incorporation.

Macho Nachos

2015 ◽  
Vol 46 (4) ◽  
pp. 182-196 ◽  
Author(s):  
Luke (Lei) Zhu ◽  
Victoria L. Brescoll ◽  
George E. Newman ◽  
Eric Luis Uhlmann
Keyword(s):  
Gender Stereotypes ◽  
Food Packaging ◽  
Food Preferences ◽  
Healthy Food ◽  
Psychological Reactance ◽  
Unhealthy Food ◽  
Healthy Foods ◽  
Gender Schema ◽  
Male And Female ◽  
Schema Congruity

Abstract. The present studies examine how culturally held stereotypes about gender (that women eat more healthfully than men) implicitly influence food preferences. In Study 1, priming masculinity led both male and female participants to prefer unhealthy foods, while priming femininity led both male and female participants to prefer healthy foods. Study 2 extended these effects to gendered food packaging. When the packaging and healthiness of the food were gender schema congruent (i.e., feminine packaging for a healthy food, masculine packaging for an unhealthy food) both male and female participants rated the product as more attractive, said that they would be more likely to purchase it, and even rated it as tasting better compared to when the product was stereotype incongruent. In Study 3, packaging that explicitly appealed to gender stereotypes (“The muffin for real men”) reversed the schema congruity effect, but only among participants who scored high in psychological reactance.

Development and production experience of the multilayer curtain-coated linerboard of Ji’an PM No. 3,

TAPPI Journal ◽  
2014 ◽  
Vol 13 (2) ◽  
pp. 17-25
Author(s):  
JUNMING SHU ◽  
ARTHAS YANG ◽  
PEKKA SALMINEN ◽  
HENRI VAITTINEN
Keyword(s):  
Titanium Dioxide ◽  
High Speed ◽  
Food Packaging ◽  
Production Efficiency ◽  
Positive Impact ◽  
Low Cost ◽  
Board Structure ◽  
Flexographic Printing ◽  
Curtain Coating ◽  
Coating Formulations

The Ji’an PM No. 3 is the first linerboard machine in China to use multilayer curtain coating technology. Since successful startup at the end of 2011, further development has been carried out to optimize running conditions, coating formulations, and the base paper to provide a product with satisfactory quality and lower cost to manufacture. The key challenges include designing the base board structure for the desired mechanical strength, designing the surface properties for subsequent coating operations, optimizing the high-speed running of the curtain coater to enhance production efficiency, minimizing the amount of titanium dioxide in the coating color, and balancing the coated board properties to make them suitable for both offset and flexographic printing. The pilot and mill scale results show that curtain coating has a major positive impact on brightness, while smoothness is improved mainly by the blade coating and calendering conditions. Optimization of base board properties and the blade + curtain + blade concept has resulted in the successful use of 100% recycled fiber to produce base board. The optical, mechanical, and printability properties of the final coated board meet market requirements for both offset and flexographic printing. Machine runnability is excellent at the current speed of 1000 m/min, and titanium dioxide has been eliminated in the coating formulations without affecting the coating coverage. A significant improvement in the total cost of coated white liner production has been achieved, compared to the conventional concept of using virgin fiber in the top ply. Future development will focus on combining low cost with further quality improvements to make linerboard suitable for a wider range of end-use applications, including frozen-food packaging and folding boxboard.

Contrasting underlying mechanisms of different barrier coating types

TAPPI Journal ◽  
2018 ◽  
Vol 17 (01) ◽  
pp. 31-37
Author(s):  
Bryan McCulloch ◽  
John Roper ◽  
Kaitlin Rosen
Keyword(s):  
Food Packaging ◽  
Underlying Mechanism ◽  
Consumer Products ◽  
Mechanical Degradation ◽  
Design Rules ◽  
Barrier Coatings ◽  
Barrier Materials ◽  
Barrier Coating ◽  
Coating Type ◽  
Underlying Mechanisms

Barrier coatings are used in applications including food packaging, dry goods, and consumer products to prevent transport of different compounds either through or into paper and paperboard substrates. These coatings are useful in packaging to contain active ingredients, such as fragrances, or to protect contents from detrimental substances, such as oxygen, water, grease, or other chemicals of concern. They also are used to prevent visual changes or mechanical degradation that might occur if the paper becomes saturated. The performance and underlying mechanism depends on the barrier coating type and, in particular, on whether the barrier coating is designed to prevent diffusive or capillary transport. Estimates on the basis of fundamental transport phenomena and data from a broad screening of different barrier materials can be used to understand the limits of various approaches to construct barrier coatings. These estimates also can be used to create basic design rules for general classes of barrier coatings.

Appropriate Food Packaging

1993 ◽  
Author(s):  
Peter Fellows ◽  
Barry Axtell
Keyword(s):  
Food Packaging

Using watermark visibility measurements to select an optimized pair of spot colors for use in a binary watermark

2020 ◽  
Vol 2020 (15) ◽  
pp. 197-1-197-7
Author(s):  
Alastair Reed ◽  
Vlado Kitanovski ◽  
Kristyn Falkenstern ◽  
Marius Pedersen
Keyword(s):  
Food Packaging ◽  
Red Light ◽  
Human Observer ◽  
Viewing Distance ◽  
Point Of Sale ◽  
Complementary Color ◽  
Low Visibility ◽  
Packaging Industry ◽  
Spot Color ◽  
Selection Of

Spot colors are widely used in the food packaging industry. We wish to add a watermark signal within a spot color that is readable by a Point Of Sale (POS) barcode scanner which typically has red illumination. Some spot colors such as blue, black and green reflect very little red light and are difficult to modulate with a watermark at low visibility to a human observer. The visibility measurements that have been made with the Digimarc watermark enables the selection of a complementary color to the base color which can be detected by a POS barcode scanner but is imperceptible at normal viewing distance.

PEMANFAATAN LIMBAH KULIT DURIAN (Durio zibethinus) DAN KULIT CEMPEDAK (Artocarpus integer) SEBAGAI EDIBLE FILM

2014 ◽  
Vol 6 (1) ◽  
pp. 27 ◽  
Author(s):  
Desi Mustika Amaliyah
Keyword(s):  
Tensile Strength ◽  
Food Packaging ◽  
Raw Materials ◽  
Edible Films ◽  
Edible Film ◽  
Durio Zibethinus ◽  
Yield Result ◽  
Pre Treatment

Durian (Durio zibethinus) and cempedak (Artocarpus integer) peels waste are not used by the society. The research aim is to extract pectin from durian and cempedak peels and to formulate the pectin into edible films for food packaging. The research stages were first pre-treatment of durian and cempedak peels, pectin extraction, pectin drying, and  pectin application as edible films with concentration of 0%, 5%, and 15%. Based on this research it was concluded that pectin can be extracted from durian and cempedak peels with yield result of 27.97 % and 55.58 %, respectively. Edible film obtained has  similar characteristics between raw materials cempedak and durian peels. The higher concentration of cempedak peel  pectin increased the thickness, but decreased the tensile strength and elongation at a concentration of 15%. While in edible films from durian peel pectin, the higher concentration of pectin decreased the thickness of edible film on pectin concentration of 15%, lowered tensile strength and raised the edible film elongation.Keywords: waste, durian, cempedak, pectin extraction, edible film

MAKING IT GREEN: THE FOOD PACKAGING PERCEPTIONS AND PRACTICES OF YOUNG CONSUMERS

2019 ◽  
Vol 1 (1) ◽  
pp. 28
Author(s):  
Norsyamira Shahrin ◽  
Rabiatul Adawiyah Abd Rahman ◽  
Noorliza Zainol ◽  
Noor Saliza Salmi ◽  
Mohd Faisal Abdul Wahab
Keyword(s):  
Standard Deviation ◽  
Food Packaging ◽  
Food Handler ◽  
Polystyrene Foam ◽  
University Of Technology ◽  
Young Consumers ◽  
Plastic Bag ◽  
The Government ◽  
The University

Food handler still fails to play their part even when the government imposes “No Plastic Bag” campaign and a ban on polystyrene foam to pack foods. This research focuses on eco-friendly food packaging based on the perception and practice of young consumers, especially the undergraduates of Mara University of Technology Penang Campus (UiTMPP). Questionnaire was constructed and distributed to 315 respondents.  The collected data were analyzed with simple descriptive statistic of frequency, mean and standard deviation. Most of the respondents are aware on eco-friendlyfood packaging. They agreed that the university should propose some alternative to control and reduce non-biodegradable foods packaging. 

Sign in / Sign up

Export Citation Format

Share Document