Spatial distribution and nitrogen metabolism behaviors of anammox biofilms in bioelectrochemical system regulated by continuous/intermittent weak electrical stimulation

Most production electron beam lithography systems can pattern minimum features a few tenths of a micron across. Linewidth in these systems is usually limited by the quality of the exposing beam and by electron scattering in the resist and substrate. By using a smaller spot along with exposure techniques that minimize scattering and its effects, laboratory e-beam lithography systems can now make features hundredths of a micron wide on standard substrate material. This talk will outline sane of these high- resolution e-beam lithography techniques.We first consider parameters of the exposure process that limit resolution in organic resists. For concreteness suppose that we have a “positive” resist in which exposing electrons break bonds in the resist molecules thus increasing the exposed resist's solubility in a developer. Ihe attainable resolution is obviously limited by the overall width of the exposing beam, but the spatial distribution of the beam intensity, the beam “profile” , also contributes to the resolution. Depending on the local electron dose, more or less resist bonds are broken resulting in slower or faster dissolution in the developer.

Download Full-text

SEM evaluation of the TEM cold-stage double-film specimen

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100111471 ◽

1984 ◽

Vol 42 ◽

pp. 272-273

Author(s):

Jayesh Bellare

Keyword(s):

Spatial Distribution ◽

Sample Preparation ◽

Sample Thickness ◽

Specimen Preparation ◽

Preparation Technique ◽

Liquid Sample ◽

Thin Specimen ◽

Sample Preparation Technique ◽

Cold Stage ◽

Film Specimen

Seeing is believing, but only after the sample preparation technique has received a systematic study and a full record is made of the treatment the sample gets.For microstructured liquids and suspensions, fast-freeze thermal fixation and cold-stage microscopy is perhaps the least artifact-laden technique. In the double-film specimen preparation technique, a layer of liquid sample is trapped between 100- and 400-mesh polymer (polyimide, PI) coated grids. Blotting against filter paper drains excess liquid and provides a thin specimen, which is fast-frozen by plunging into liquid nitrogen. This frozen sandwich (Fig. 1) is mounted in a cooling holder and viewed in TEM.Though extremely promising for visualization of liquid microstructures, this double-film technique suffers from a) ireproducibility and nonuniformity of sample thickness, b) low yield of imageable grid squares and c) nonuniform spatial distribution of particulates, which results in fewer being imaged.

Download Full-text

Macroprobe Mode for the Study of Segregation in Steels

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100134909 ◽

1990 ◽

Vol 48 (2) ◽

pp. 260-261

Author(s):

Auclair Gilles ◽

Benoit Danièle

Keyword(s):

Mechanical Properties ◽

Spatial Distribution ◽

High Performance ◽

Volume Fraction ◽

Sheet Steel ◽

Acquisition Time ◽

Chemical Information ◽

X Ray ◽

Accurate Quantitative Analysis ◽

Optical Micrographs

During these last 10 years, high performance correction procedures have been developed for classical EPMA, and it is nowadays possible to obtain accurate quantitative analysis even for soft X-ray radiations. It is also possible to perform EPMA by adapting this accurate quantitative procedures to unusual applications such as the measurement of the segregation on wide areas in as-cast and sheet steel products.The main objection for analysis of segregation in steel by means of a line-scan mode is that it requires a very heavy sampling plan to make sure that the most significant points are analyzed. Moreover only local chemical information is obtained whereas mechanical properties are also dependant on the volume fraction and the spatial distribution of highly segregated zones. For these reasons we have chosen to systematically acquire X-ray calibrated mappings which give pictures similar to optical micrographs. Although mapping requires lengthy acquisition time there is a corresponding increase in the information given by image anlysis.

Download Full-text

Ultrastructural analysis of the spatial distribution of MRNA

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100123167 ◽

1992 ◽

Vol 50 (1) ◽

pp. 552-553

Author(s):

Gary Bassell ◽

Robert H. Singer

Keyword(s):

Electron Microscopy ◽

Spatial Distribution ◽

In Situ Hybridization ◽

High Resolution ◽

Nucleic Acids ◽

Colloidal Gold ◽

Dna Probe ◽

Nucleotide Analogs ◽

Gold Particles

We have been investigating the spatial distribution of nucleic acids intracellularly using in situ hybridization. The use of non-isotopic nucleotide analogs incorporated into the DNA probe allows the detection of the probe at its site of hybridization within the cell. This approach therefore is compatible with the high resolution available by electron microscopy. Biotinated or digoxigenated probe can be detected by antibodies conjugated to colloidal gold. Because mRNA serves as a template for the probe fragments, the colloidal gold particles are detected as arrays which allow it to be unequivocally distinguished from background.

Download Full-text

The “KIMWIPE” Effect in Ultra-Thin Cryosections

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100119119 ◽

1985 ◽

Vol 43 ◽

pp. 458-459

Author(s):

I. Taylor ◽

P. Ingram ◽

J.R. Sommer

Keyword(s):

Skeletal Muscle ◽

Electrical Stimulation ◽

Muscle Fibers ◽

Ice Crystals ◽

Crystal Formation ◽

Ice Crystal ◽

Thin Sections ◽

Skeletal Muscle Fibers ◽

Freeze Dried ◽

Ice Crystal Formation

In studying quick-frozen single intact skeletal muscle fibers for structural and microchemical alterations that occur milliseconds, and fractions thereof, after electrical stimulation, we have developed a method to compare, directly, ice crystal formation in freeze-substituted thin sections adjacent to all, and beneath the last, freeze-dried cryosections. We have observed images in the cryosections that to our knowledge have not been published heretofore (Figs.1-4). The main features are that isolated, sometimes large regions of the sections appear hazy and have much less contrast than adjacent regions. Sometimes within the hazy regions there are smaller areas that appear crinkled and have much more contrast. We have also observed that while the hazy areas remain still, the regions of higher contrast visibly contract in the beam, often causing tears in the sections that are clearly not caused by ice crystals (Fig.3, arrows).

Download Full-text

Membrane microdomains: lessons from microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100140257 ◽

1995 ◽

Vol 53 ◽

pp. 776-777

Author(s):

J.M. Robinson ◽

J.M Oliver

Keyword(s):

Spatial Distribution ◽

Plasma Membrane ◽

Epithelial Cells ◽

Plasma Membranes ◽

Cell Types ◽

Imaging Modalities ◽

Membrane Microdomains ◽

Membrane Domains ◽

Lateral Heterogeneity ◽

Functional Importance

Specialized regions of plasma membranes displaying lateral heterogeneity are the focus of this Symposium. Specialized membrane domains are known for certain cell types such as differentiated epithelial cells where lateral heterogeneity in lipids and proteins exists between the apical and basolateral portions of the plasma membrane. Lateral heterogeneity and the presence of microdomains in membranes that are uniform in appearance have been more difficult to establish. Nonetheless a number of studies have provided evidence for membrane microdomains and indicated a functional importance for these structures.This symposium will focus on the use of various imaging modalities and related approaches to define membrane microdomains in a number of cell types. The importance of existing as well as emerging imaging technologies for use in the elucidation of membrane microdomains will be highlighted. The organization of membrane microdomains in terms of dimensions and spatial distribution is of considerable interest and will be addressed in this Symposium.

Download Full-text