Cd diminution through microbial mediated degraded lignocellulose maize straw: Batch adsorption and bioavailability trails

Iron-coated sand (ICS) prepared by using FeCl3 and Joomoonjin sand widely used in Korea was used in this study. In batch adsorption kinetics, As(V) adsorption onto ICS was completed within 20 minutes, while adsorption of Pb(II), Cd(II), and Cu(II) onto ICS was slower than that of As(V) and strongly depended on initial pH. At pH 3.5, ICS showed a selective adsorption of Pb(II) compared to Cd( II) and Cu(II) . However, above pH 4.5, near complete removal of Pb(II), Cd(II), and Cu(II) was observed through adsorption or precipitation depending on pH. As(V) adsorption onto ICS occurred through an anionic-type and followed a Langmuir-type adsorption behaviour. In column experiments, pH was identified as an important parameter in the breakthrough of As(V). As(V) breakthrough at pH 4.5 was much slower than at pH 9 due to a strong chemical bonding between As(V) and ICS as similar with batch adsorption behaviour. With variation of ICS amounts, the optimum amount of ICS at pH 4.5 was identified as 5.0 grams in this research. At this condition, ICS could be used to treat 200 mg of As(V) with 1 kg of ICS until 50 ppb of As(V) appeared in the effluent. In this research, as a new treatment system, ICS can be potentially used to treat As(V) and cationic heavy metals.

Download Full-text

Utilisation of Biomass and Hybrid Biochar from Elephant Grass and Low Density Polyethylene for the Competitive Adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) from Aqueous Media

Recent Innovations in Chemical Engineering (Formerly Recent Patents on Chemical Engineering) ◽

10.2174/2405520413999201117143926 ◽

2020 ◽

Vol 13 ◽

Author(s):

Joshua O. Ighalo ◽

Lois T. Arowoyele ◽

Samuel Ogunniyi ◽

Comfort A. Adeyanju ◽

Folasade M. Oladipo-Emmanuel ◽

...

Keyword(s):

Heavy Metals ◽

Removal Efficiency ◽

Contact Time ◽

Competitive Adsorption ◽

Adsorption Process ◽

Aqueous Media ◽

Polluted Water ◽

Batch Adsorption ◽

Order Kinetic ◽

Elephant Grass

Background: The presence of pollutants in polluted water is not singularized hence pollutant species are constantly in competition for active sites during the adsorption process. A key advantage of competitive adsorption studies is that it informs on the adsorbent performance in real water treatment applications. Objective: This study aims to investigate the competitive adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) using elephant grass (Pennisetum purpureum) biochar and hybrid biochar from LDPE. Method: The produced biochar was characterised by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). The effect of adsorption parameters, equilibrium isotherm modelling and parametric studies were conducted based on data from the batch adsorption experiments. Results: For both adsorbents, the removal efficiency was >99% over the domain of the entire investigation for dosage and contact time suggesting that they are very efficient for removing multiple heavy metals from aqueous media. It was observed that removal efficiency was optimal at 2 g/l dosage and contact time of 20 minutes for both adsorbent types. The Elovich isotherm and the pseudo-second order kinetic models were best-fit for the competitive adsorption process. Conclusion: The study was able to successfully reveal that biomass biochar from elephant grass and hybrid biochar from LDPE can be used as effective adsorbent material for the removal of heavy metals from aqueous media. This study bears a positive implication for environmental protection and solid waste management.

Download Full-text

Biological granulated activated carbon fluidized bed reactor for atrazine remediation

Water Science & Technology ◽

10.2166/wst.2004.0845 ◽

2004 ◽

Vol 49 (11-12) ◽

pp. 215-222 ◽

Cited By ~ 11

Author(s):

M. Herzberg ◽

C.G. Dosoretz ◽

S. Tarre ◽

M. Beliavski ◽

M. Green

Keyword(s):

Fluidized Bed ◽

Fluidized Bed Reactor ◽

Batch Adsorption ◽

Pseudomonas Sp ◽

Partial Penetration ◽

Biofilm Carrier ◽

Degradation Rates ◽

Degrading Bacteria ◽

Atrazine Degradation ◽

Granulated Activated Carbon

To show that an adsorbing biofilm carrier (GAC) can be advantageous for atrazine bioremediation over a non-adsorbing carrier, fluidized bed (FB) reactors were operated under atrazine limiting concentrations using Pseudomonas sp. strain ADP as the atrazine degrading bacteria. The following interrelated subjects were investigated: 1) atrazine adsorption to GAC under conditions of atrazine partial penetration in the biofilm, 2) differences in atrazine degradation rates and 3) stability of atrazine biodegradation under non-sterile anoxic conditions in the GAC reactor versus a reactor with a non-adsorbing biofilm carrier. Results from batch adsorption tests together with modeling best described the biofilm as patchy in nature with covered and non-biofilm covered areas. Under conditions of atrazine partial penetration in the biofilm, atrazine adsorption occurs in the non-covered areas and is consequently desorbed at the base of the biofilm substantially increasing the active biofilm surface area. The double flux of atrazine to the biofilm in the GAC reactor results in lower effluent atrazine concentrations as compared to a FB reactor with a non-adsorbing carrier. Moreover, under non-sterile denitrification conditions, atrazine degradation stability was found to be much higher (several months) using GAC as a biofilm carrier while non-adsorbing carrier reactors showed sharp deterioration within 30 days due to contamination of non-atrazine degrading bacteria.

Download Full-text

Effects of accumulated straw residues on sorption of pesticides and antibiotics in soils with maize straw return

Journal of Hazardous Materials ◽

10.1016/j.jhazmat.2021.126213 ◽

2021 ◽

pp. 126213

Author(s):

Xudong Jing ◽

Qian Li ◽

Xianliang Qiao ◽

Jingwen Chen ◽

Xiyun Cai

Keyword(s):

Maize Straw ◽

Straw Return

Download Full-text

Synthesis, characterization and heavy metal removal efficiency of nickel ferrite nanoparticles (NFN’s)

Scientific Reports ◽

10.1038/s41598-021-83363-1 ◽

2021 ◽

Vol 11 (1) ◽

Author(s):

Waheed Ali Khoso ◽

Noor Haleem ◽

Muhammad Anwar Baig ◽

Yousuf Jamal

Keyword(s):

Heavy Metals ◽

Nickel Ferrite ◽

Contact Time ◽

Metal Removal ◽

Heavy Metal Removal ◽

Ferrite Nanoparticles ◽

Batch Adsorption ◽

Aqueous Environment ◽

Human Beings ◽

Nickel Ferrite Nanoparticles

AbstractThe heavy metals, such as Cr(VI), Pb(II) and Cd(II), in aqueous solutions are toxic even at trace levels and have caused adverse health impacts on human beings. Hence the removal of these heavy metals from the aqueous environment is important to protect biodiversity, hydrosphere ecosystems, and human beings. In this study, magnetic Nickel-Ferrite Nanoparticles (NFNs) were synthesized by co-precipitation method and characterized using X-Ray Diffraction (XRD), Energy Dispersive Spectroscopy (EDS) and Field Emission Scanning Electronic Microscopy (FE-SEM) techniques in order to confirm the crystalline structure, composition and morphology of the NFN’s, these were then used as adsorbent for the removal of Cr(VI), Pb(II) and Cd(II) from wastewater. The adsorption parameters under study were pH, dose and contact time. The values for optimum removal through batch-adsorption were investigated at different parameters (pH 3–7, dose: 10, 20, 30, 40 and 50 mg and contact time: 30, 60, 90, and 120 min). Removal efficiencies of Cr(VI), Pb(II) and Cd(II) were obtained 89%, 79% and 87% respectively under optimal conditions. It was found that the kinetics followed the pseudo second order model for the removal of heavy metals using Nickel ferrite nanoparticles.

Download Full-text

Effects of different patterns of maize-straw application on soil microorganisms, enzyme activities, and grain yield

Bioengineered ◽

10.1080/21655979.2021.1931639 ◽

2021 ◽

Vol 12 (1) ◽

pp. 3684-3698

Author(s):

Xilin Ning ◽

Xiaohui Wang ◽

Zheyun Guan ◽

Yan Gu ◽

Chunsheng Wu ◽

...

Keyword(s):

Grain Yield ◽

Enzyme Activities ◽

Soil Microorganisms ◽

Maize Straw ◽

Straw Application

Download Full-text

Release of toxic methylene blue from water by mesoporous silicalite-1: characterization, kinetics and isotherm studies

Applied Water Science ◽

10.1007/s13201-021-01435-z ◽

2021 ◽

Vol 11 (7) ◽

Author(s):

Sabarish Radoor ◽

Jasila Karayil ◽

Aswathy Jayakumar ◽

Jyotishkumar Parameswaranpillai ◽

Suchart Siengchin

Keyword(s):

Electron Microscopy ◽

Contact Time ◽

Dye Removal ◽

Batch Adsorption ◽

Aqueous Environment ◽

Order Kinetic ◽

Adsorption Method ◽

X Ray ◽

Ft Ir ◽

Adsorption Desorption

AbstractIn the present work, we have developed a mesoporous silicalite-1 using CMC as a template for the removal of MB from aqueous solution. The synthesized silicalite-1 were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Energy-dispersive X-ray spectroscopy (EDAX) and N2 adsorption–desorption isotherm (BET). XRD and FT-IR analysis confirmed the formation of crystallinity and development of MFI structure in the mesoporous silicalite-1. The adsorption of MB dye on mesoporous silicalite-1 was conducted by batch adsorption method. The effect of various parameters such as adsorbent dosage, initial dye concentration, contact time and temperature on the dye uptake ability of silicalite-1 was investigated. The operating parameters for the maximum adsorption are silicalite-1 dosage (0.1 wt%), contact time (240 min), initial dye concentration (10 ppm) and temperature (30 ℃). The MB dye removal onto mesoporous silicalite-1 followed pseudo-second-order kinetic and Freundlich isotherm. The silicalite-1 exhibits 86% removal efficiency even after six adsorption–desorption cycle. Therefore, the developed mesoporous silicalite-1 is an effective eco-friendly adsorbent for MB dye removal from aqueous environment.

Download Full-text

Kinetics and isotherm modeling of Pb(II) and Cd(II) sequestration from polluted water onto tropical ultisol obtained from Enugu Nigeria

Applied Water Science ◽

10.1007/s13201-021-01402-8 ◽

2021 ◽

Vol 11 (4) ◽

Author(s):

Theresa C. Umeh ◽

John K. Nduka ◽

Kovo G. Akpomie

Keyword(s):

Metal Ions ◽

Low Cost ◽

Water Environment ◽

Standard Technique ◽

Soil Surface ◽

Cost Effective ◽

Polluted Water ◽

Batch Adsorption ◽

Lead And Cadmium ◽

Pseudo Second Order

AbstractDeterioration in soil–water environment severely contributed by heavy metal bioavailability and mobility on soil surface and sub-surface due to irrational increase in wastewater discharge and agrochemical activities. Therefore, the feasibility of adsorption characteristics of the soil is paramount in curbing the problem of micropollutant contamination in the farming vicinity. Soil from a farming site in a populated area in Enugu, Nigeria was collected and tested to measure the lead and cadmium contents using atomic absorption spectrophotometer (AAS). The adsorption potency of the ultisol soil was estimated for identifiable physicochemical properties by standard technique. The mean activity concentration of Pb2+ and Cd2+ was 15.68 mg/kg and 3.01 mg/kg. The pH, temperature, metal concentration and contact time adsorptive effect on the Pb2+ and Cd2+ uptake was evaluated by batch adsorption technique. The Langmuir, Freundlich and Temkin models were fitted into equilibrium adsorption data and the calculated results depict a better and satisfactory correlation for Langmuir with higher linear regression coefficients (Pb2+, 0.935 and Cd2+, 0.971). On the basis of sorption capacity mechanism of the soil, pseudo-second-order model best described the kinetics of both metal ions retention process. The results of the present study indicated that the soil being a low cost-effective adsorbent can be utilized to minimize the environmental risk impact of these metal ions.

Download Full-text