Systematic DFT study of the impact of anionic variations on the physical properties of Cd1-xMnxX (X S, Se, Te; x = 6.25%)

2018 ◽  
Vol 107 ◽  
pp. 225-235 ◽  
Author(s):  
Q. Mahmood ◽  
S. Khalil ◽  
M. Hassan ◽  
A. Laref
TAPPI Journal ◽  
2016 ◽  
Vol 15 (10) ◽  
pp. 643-651 ◽  
Author(s):  
ROBERT J. OGLESBY ◽  
HUMPHREY J. MOYNIHAN ◽  
RICARDO B. SANTOS ◽  
ASHOK GHOSH ◽  
PETER W. HART

The impact of commercially prepared, fully bleached pulp viscosity variation on handsheet physical properties was evaluated at different levels of pulp refining. Hardwood pulps from the same brownstock species mix, cooking parameters, and kappa numbers were processed through two different commercial bleach plants: one with a D0(EP)D1D2 sequence and the second with an OD0(EOP)D1 sequence. Additionally, a commercial softwood (predominately Scotts pine) brownstock pulp bleached by an OD0(EP)D1D2 sequence was employed in this study. Pulps with viscosities ranging from 14 to 21 mPa∙s were refined in a Valley beater to two freeness levels, and the associated handsheet physical properties were measured in this study. Over the pulp viscosity range of 14 to 21 mPa∙s, no clear correlation was found to exist between pulp viscosity and related paper physical properties. Finally, a series of laboratory prepared bleached pulps were purposely prepared under non-ideal conditions to reduce their final viscosities to lower values. Handsheets made from these pulps were tested in their unbeaten condition for physical strength properties. Significant and rapid strength loss occurred when the measured pulp viscosity dropped below 12 mPa∙s; overall strength properties showed no correlation to viscosity above the critical 12 mPa∙s value.


Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1050
Author(s):  
Sylwia Cyboran-Mikołajczyk ◽  
Robert Pasławski ◽  
Urszula Pasławska ◽  
Kacper Nowak ◽  
Michał Płóciennik ◽  
...  

Long-term high fat-carbohydrates diet (HF-CD) contributes to the formation of irreversible changes in the organism that lead to the emergence of civilization diseases. In this study, the impact of three-month high-fat diet on the physical properties of erythrocytes (RBCs) was studied. Furthermore, the biological activity of Cistus incanus L. extracts, plant known with high pro-health potential, in relation to normal and HF-CD RBCs, was determined. Obtained results have shown that, applied HF-CD modified shape, membrane potential and osmotic resistance of erythrocytes causing changes in membrane lipid composition and the distribution of lipids. The impact of HF-CD on physical properties of RBCs along with atherosclerotic lesions of the artery was visible, despite the lack of statistically significant changes in blood morphology and plasma lipid profile. This suggests that erythrocytes may be good markers of obesity-related diseases. The studies of biological activity of Cistus incanus L. extracts have demonstrated that they may ameliorate the effect of HF-CD on erythrocytes through the membrane-modifying and antioxidant activity.


Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 378
Author(s):  
Li Zhao ◽  
Zhiwei Hu ◽  
Hanjie Guo ◽  
Christoph Geibel ◽  
Hong-Ji Lin ◽  
...  

We report on the synthesis and physical properties of cm-sized CoGeO3 single crystals grown in a high pressure mirror furnace at pressures of 80 bar. Direction dependent magnetic susceptibility measurements on our single crystals reveal highly anisotropic magnetic properties that we attribute to the impact of strong single ion anisotropy appearing in this system with TN∼33.5 K. Furthermore, we observe effective magnetic moments that are exceeding the spin only values of the Co ions, which reveals the presence of sizable orbital moments in CoGeO3.


2021 ◽  
Vol 127 (4) ◽  
Author(s):  
Esra Kaya ◽  
Ali Uğur ◽  
Arife Gencer Imer ◽  
Murat Aycibin ◽  
Yusuf Selim Ocak

2012 ◽  
Vol 10 (H16) ◽  
pp. 478-479
Author(s):  
Patrick Michel ◽  

AbstractNEOShield is a European-Union funded project coordinated by the German Aero-space Center, DLR, to address near-Earth object (NEO) impact hazard mitigation issues. The NEOShield consortium consists of 13 research institutes, universities, and industrial partners from 6 countries and includes leading US and Russian space organizations. The project is funded for a period of 3.5 years from January 2012 with a total of 5.8 million euros. The primary aim of the project is to investigate in detail promising mitigation techniques, such as the kinetic impactor, blast deflection, and the gravity tractor, and devise feasible demonstration missions. Options for an international strategy for implementation when an actual impact threat arises will also be investigated.The NEOShield work plan consists of scientific investigations into the nature of the impact hazard and the physical properties of NEOs, and technical and engineering studies of practical means of deflecting NEOs. There exist many ideas for asteroid deflection techniques, many of which would require considerable scientific and technological development. The emphasis of NEOShield is on techniques that are feasible with current technology, requiring a minimum of research and development work. NEOShield aims to provide detailed designs of feasible mitigation demonstration missions, targeting NEOs of the kind most likely to trigger the first space-based mitigation action.Most of the asteroid deflection techniques proposed to date require physical contact with the threatening object, an example being the kinetic impactor. NEOShield includes research into the mitigation-relevant physical properties of NEOs on the basis of remotely-sensed astronomical data and the results of rendezvous missions, the observational techniques required to efficiently gather mitigation-relevant data on the dynamical state and physical properties of a threatening NEO, and laboratory investigations using gas guns to fire projectiles into asteroid regolith analog materials. The gas-gun investigations enable state-of-the-art numerical models to be verified at small scales. Computer simulations at realistic NEO scales are used to investigate how NEOs with a range of properties would respond to a pulse of energy applied in a deflection attempt. The technical work includes the development of crucial technologies, such as the autonomous guidance of a kinetic impactor to a precise point on the surface of the target, and the detailed design of realistic missions for the purpose of demonstrating the applicability and feasibility of one or more of the techniques investigated. Theoretical work on the blast deflection method of mitigation is designed to probe the circumstances in which this last line of defense may be the only viable option and the issues relating to its deployment. A global response campaign roadmap will be developed based on realistic scenarios presented, for example, by the discovery of an object such as 99942 Apophis or 2011 AG5 on a threatening orbit. The work will include considerations of the timeline of orbit knowledge and impact probability development, reconnaissance observations and fly-by or rendezvous missions, the political decision to mount a mitigation attempt, and the design, development, and launch of the mitigation mission. Collaboration with colleagues outside the NEOShield Consortium involved in complementary activities (e.g. under the auspices of the UN, NASA, or ESA) is being sought in order to establish a broad international strategy.We present a brief overview of the history and planned scope of the project, and progress made to date.The NEOShield project (http://www.neoshield.net) has received funding from the European Union Seventh Framework Program (FP7/2007-2013) under Grant Agreement no. 282703.


2016 ◽  
Vol 230 (5-7) ◽  
Author(s):  
Khadidja Adjir ◽  
Majda Sekkal-Rahal ◽  
Aurélien Moncomble ◽  
Jean-Paul Cornard

AbstractStructural and physical properties such as some spectral features of


2021 ◽  
Author(s):  
Andrew Cheng ◽  
Elizabetta Dotto ◽  
Eugene Fahnestock ◽  
Vincenzo Della Corte ◽  
Nancy Chabot ◽  
...  

<p>The NASA Double Asteroid Redirection Test (DART) mission will demonstrate asteroid deflection by a kinetic impactor. DART will impact Dimorphos, the secondary member of the (65803) Didymos system, in late September to early October, 2022 in order to change the binary orbit period. DART will carry a 6U CubeSat called LICIACube, contributed by the Italian Space Agency, to document the DART impact and to observe the impact ejecta. LICIACube will be released by DART 10 days prior to Didymos encounter, and LICIACube will fly by Dimorphos at closest approach distance of about 51 km and with a closest approach time delay of about 167 s after the DART impact. LICIACube will observe the structure and evolution of the DART impact ejecta plume and will obtain images of the surfaces of both bodies at best ground sampling about 1.4 m per pixel. LICIACube imaging importantly includes the non-impact hemisphere of the target body, the side not imaged by DART.</p> <p> </p> <p>The LICIACube flyby trajectory, notably the closest approach distance and the time delay of closest approach, are designed to optimize the study of ejecta plume evolution without exposing the satellite to impact hazard. LICIACube imaging will determine the direction of the ejecta plume and the ejection angles, and will further help to determine the ejecta momentum transfer efficiency <em>β</em>. The ejecta plume structure, as it evolves over time, is determined by the amount of ejecta that has reached a given altitude at a given time. The LICIACube plume images enable characterization of the ejecta mass versus velocity distribution, which is strongly dependent on target properties like strength and porosity and is therefore a powerful diagnostic of the DART impact, complementary to measurements of the DART impact crater by the ESA Hera mission which will arrive at Didymos in 2026. Hera will measure crater radius and crater volume to determine the total volume of ejecta, which together with a ejecta mass-velocity distribution gives a full characterization of the DART impact.</p> <p> </p> <p>Models of the ejecta plume evolution as imaged by LICIACube show how LICIACube images can discriminate between different target physical properties (mainly strength and porosity), thereby allowing inferences of the magnitude of the ejecta momentum. Measured ejecta plume optical depth profiles can distinguish between gravity-controlled and strength-controlled impact cases and help determine target physical properties. LICIACube ejecta plume images further provide information on the direction of the ejecta momentum as well as the magnitude, requiring full 2-D simulations of the plume images. We will present new simulation model optical depth profiles across the plume at arbitrary positions.</p> <p><br />We thank NASA for support of the DART project at JHU/APL, under Contract # NNN06AA01C, Task Order # NNN15AA05T. The Italian LICIACube team acknowledges financial support from Agenzia Spaziale Italiana (ASI, contract No. 2019-31-HH.0 CUP<br />F84I190012600).</p>


2021 ◽  
Author(s):  
Zhenyu Zhang ◽  
Patrick Laux ◽  
Joël Arnault ◽  
Jianhui Wei ◽  
Jussi Baade ◽  
...  

<p>Land degradation with its direct impact on vegetation, surface soil layers and land surface albedo, has great relevance with the climate system. Assessing the climatic and ecological effects induced by land degradation requires a precise understanding of the interaction between the land surface and atmosphere. In coupled land-atmosphere modeling, the low boundary conditions impact the thermal and hydraulic exchanges at the land surface, therefore regulates the overlying atmosphere by land-atmosphere feedback processes. However, those land-atmosphere interactions are not convincingly represented in coupled land-atmosphere modeling applications. It is partly due to an approximate representation of hydrological processes in land surface modeling. Another source of uncertainties relates to the generalization of soil physical properties in the modeling system. This study focuses on the role of the prescribed physical properties of soil in high-resolution land surface-atmosphere simulations over South Africa. The model used here is the hydrologically-enhanced Weather Research and Forecasting (WRF-Hydro) model. Four commonly used global soil datasets obtained from UN Food and Agriculture Organization (FAO) soil database, Harmonized World Soil Database (HWSD), Global Soil Dataset for Earth System Model (GSDE), and SoilGrids dataset, are incorporated within the WRF-Hydro experiments for investigating the impact of soil information on land-atmosphere interactions. The simulation results of near-surface temperature, skin temperature, and surface energy fluxes are presented and compared to observational-based reference dataset. It is found that simulated soil moisture is largely influenced by soil texture features, which affects its feedback to the atmosphere.</p>


2012 ◽  
Vol 602-604 ◽  
pp. 2267-2272
Author(s):  
Shu Lei Zhao ◽  
Zheng Yuan Wei ◽  
Xiao Tian Ding ◽  
Qiang Lin

This paper experimentally examined the impact of four different drying methods (free drying, press drying, vacuum drying and impingement drying) on paper physical properties including roughness, elongation, air permeance, tearing resistance, tensile index and bursting strength. The handsheets materials are HWBKP (Hardwood Bleached Chemical Pulp), SWBKP (Softwood Bleached Chemical Pulp), CTMP (Chemical Thermo mechanical Pulp) and ATMP (Advanced Thermo Mechanical Pulp). Good experimental data were obtained for the four pulps under different drying conditions. The results of our investigation indicate that press drying have lower surface roughness, elongation and air permeance but higher tearing resistance; the vacuum drying have higher roughness, tensile index and bursting strength; the impingement drying have lower tearing resistance, tensile index and bursting strength but higher elongation and air permeance. Selection of different drying conditions for effective productivity and quality improvement potential is proposed as a direction for the future dryer design.


Sign in / Sign up

Export Citation Format

Share Document