DART and LICIACUBE: Documenting Kinetic Impact

2021 ◽  
Author(s):  
Andrew Cheng ◽  
Elizabetta Dotto ◽  
Eugene Fahnestock ◽  
Vincenzo Della Corte ◽  
Nancy Chabot ◽  
...  
Keyword(s):  
Time Delay ◽  
Velocity Distribution ◽  
Physical Properties ◽  
Optical Depth ◽  
Depth Profiles ◽  
Full Characterization ◽  
Approach Distance ◽  
Impact Ejecta ◽  
The Impact

<p>The NASA Double Asteroid Redirection Test (DART) mission will demonstrate asteroid deflection by a kinetic impactor. DART will impact Dimorphos, the secondary member of the (65803) Didymos system, in late September to early October, 2022 in order to change the binary orbit period. DART will carry a 6U CubeSat called LICIACube, contributed by the Italian Space Agency, to document the DART impact and to observe the impact ejecta. LICIACube will be released by DART 10 days prior to Didymos encounter, and LICIACube will fly by Dimorphos at closest approach distance of about 51 km and with a closest approach time delay of about 167 s after the DART impact. LICIACube will observe the structure and evolution of the DART impact ejecta plume and will obtain images of the surfaces of both bodies at best ground sampling about 1.4 m per pixel. LICIACube imaging importantly includes the non-impact hemisphere of the target body, the side not imaged by DART.</p> <p> </p> <p>The LICIACube flyby trajectory, notably the closest approach distance and the time delay of closest approach, are designed to optimize the study of ejecta plume evolution without exposing the satellite to impact hazard. LICIACube imaging will determine the direction of the ejecta plume and the ejection angles, and will further help to determine the ejecta momentum transfer efficiency <em>β</em>. The ejecta plume structure, as it evolves over time, is determined by the amount of ejecta that has reached a given altitude at a given time. The LICIACube plume images enable characterization of the ejecta mass versus velocity distribution, which is strongly dependent on target properties like strength and porosity and is therefore a powerful diagnostic of the DART impact, complementary to measurements of the DART impact crater by the ESA Hera mission which will arrive at Didymos in 2026. Hera will measure crater radius and crater volume to determine the total volume of ejecta, which together with a ejecta mass-velocity distribution gives a full characterization of the DART impact.</p> <p> </p> <p>Models of the ejecta plume evolution as imaged by LICIACube show how LICIACube images can discriminate between different target physical properties (mainly strength and porosity), thereby allowing inferences of the magnitude of the ejecta momentum. Measured ejecta plume optical depth profiles can distinguish between gravity-controlled and strength-controlled impact cases and help determine target physical properties. LICIACube ejecta plume images further provide information on the direction of the ejecta momentum as well as the magnitude, requiring full 2-D simulations of the plume images. We will present new simulation model optical depth profiles across the plume at arbitrary positions.</p> <p><br />We thank NASA for support of the DART project at JHU/APL, under Contract # NNN06AA01C, Task Order # NNN15AA05T. The Italian LICIACube team acknowledges financial support from Agenzia Spaziale Italiana (ASI, contract No. 2019-31-HH.0 CUP<br />F84I190012600).</p>

scholarly journals Full Characterization of Act-and-wait Control for First-order Unstable Lag Processes

2010 ◽  
Vol 16 (7-8) ◽  
pp. 1209-1233 ◽  
Author(s):  
T. Insperger ◽  
P. Wahi ◽  
A. Colombo ◽  
G. Stépán ◽  
M. Di Bernardo ◽  
...  
Keyword(s):  
Time Delay ◽  
Feedback Systems ◽  
Periodic Control ◽  
First Order ◽  
Full Characterization ◽  
The Stability ◽  
And Control ◽  
Time Periodic ◽  
Special Case

Act-and-wait control is a special case of time-periodic control for systems with feedback delay, where the control gains are periodically switched on and off in order to stabilize otherwise unstable systems. The stability of feedback systems in the presence of time delay is a challenging problem. In this paper, we show that the act-and-wait type time-periodic control can always provide deadbeat control for first-order unstable lag processes with any (large but) fixed value of the time delay in the feedback loop. A full characterization of this act-and-wait controller with respect to the system and control parameters is given based on performance and robustness against disturbances.

Preparation, stability and wettability of nanofluid: A review

2020 ◽  
Vol 14 (3) ◽  
pp. 7244-7257
Author(s):  
W. Safiei ◽  
M.M. Rahman ◽  
A.R. Yusoff ◽  
M.R. Radin
Keyword(s):  
Physical Properties ◽  
Working Fluid ◽  
Hybrid Nanofluid ◽  
Engineering Applications ◽  
Performance Preparation ◽  
Stable Suspension ◽  
The Stability ◽  
The Impact ◽  
Thermal Physical Properties

Nanofluids possess many advantages over conventional working fluid especially in physical, thermal and rheology properties. Nowadays, nanofluids have been applied extensively in many engineering applications in enhancing the overall performance. Preparation and characterization of nanofluids are vital as the nanomaterials have significant effects on the dispersion and stability of nanofluids. On the other hand, there is a trend to employ more than a single nanoparticle for preparing nanofluid. The hybrid nanofluid receives wide attention due to its capability in improving the thermal-physical properties of single phase nanofluids. In this paper, the flow of formulating nanofluid from preparation method, characterization, wettability analysis and stability techniques are discussed comprehensively. Furthermore, the challenges for obtaining stable suspension and wettability behaviour of nanofluids are discussed as well. The main objective when preparing the nanofluids is to obtain a well-dispersed nanoparticle into the base fluid. Based on the literature review, the impact of surfactant on the stability and the correlation between nanofluids wettability and thermal-physical properties of nanofluids have great potential to discover. There are some aspects that can be considered to expand the knowledge of nanofluids such as the composition ratio of hybrid nanofluid with regards to achieving the best stability and wettability study of hybrid nanofluid with and without surfactant in the suspension. Therefore, a lot of research should be conducted in order to explore the behaviour of nanofluid and the effect of various surfactants in terms of stability as well as its thermal and viscosity effect on the engineering applications.

Does kraft hardwood and softwood pulp viscosity correlate to paper properties?

TAPPI Journal ◽  
2016 ◽  
Vol 15 (10) ◽  
pp. 643-651 ◽  
Author(s):  
ROBERT J. OGLESBY ◽  
HUMPHREY J. MOYNIHAN ◽  
RICARDO B. SANTOS ◽  
ASHOK GHOSH ◽  
PETER W. HART
Keyword(s):  
Physical Properties ◽  
Strength Loss ◽  
Strength Properties ◽  
Clear Correlation ◽  
Paper Properties ◽  
Physical Strength ◽  
Pulp Viscosity ◽  
Softwood Pulp ◽  
The Impact ◽  
Related Paper

The impact of commercially prepared, fully bleached pulp viscosity variation on handsheet physical properties was evaluated at different levels of pulp refining. Hardwood pulps from the same brownstock species mix, cooking parameters, and kappa numbers were processed through two different commercial bleach plants: one with a D0(EP)D1D2 sequence and the second with an OD0(EOP)D1 sequence. Additionally, a commercial softwood (predominately Scotts pine) brownstock pulp bleached by an OD0(EP)D1D2 sequence was employed in this study. Pulps with viscosities ranging from 14 to 21 mPa∙s were refined in a Valley beater to two freeness levels, and the associated handsheet physical properties were measured in this study. Over the pulp viscosity range of 14 to 21 mPa∙s, no clear correlation was found to exist between pulp viscosity and related paper physical properties. Finally, a series of laboratory prepared bleached pulps were purposely prepared under non-ideal conditions to reduce their final viscosities to lower values. Handsheets made from these pulps were tested in their unbeaten condition for physical strength properties. Significant and rapid strength loss occurred when the measured pulp viscosity dropped below 12 mPa∙s; overall strength properties showed no correlation to viscosity above the critical 12 mPa∙s value.

The Impact of Dust Storms on Aerosol Optical Depth and Radiative Forcing

2020 ◽  
Vol 16 (1) ◽  
pp. 1-14
Author(s):  
Monim Jiboori ◽  
Nadia Abed ◽  
Mohamed Abdel Wahab
Keyword(s):  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Radiative Forcing ◽  
Dust Storms ◽  
The Impact

A Thorough Theoretical Exploration of Intriguing Characteristics of Cyclo[18]carbon: Geometry, Bonding Nature, Aromaticity, Weak Interaction, Reactivity, Excited States, Vibrations, Molecular Dynamics and Various Molecular Properties

2019 ◽  
Author(s):  
Tian Lu ◽  
Qinxue Chen ◽  
Zeyu Liu
Keyword(s):  
Molecular Dynamics ◽  
Excited States ◽  
Electronic Excitation ◽  
Ring Structure ◽  
Molecular Properties ◽  
Molecular Vibration ◽  
Full Characterization ◽  
Long Time ◽  
Almost All

Although cyclo[18]carbon has been theoretically and experimentally investigated since long time ago, only very recently it was prepared and directly observed by means of STM/AFM in condensed phase (Kaiser et al., <i>Science</i>, <b>365</b>, 1299 (2019)). The unique ring structure and dual 18-center π delocalization feature bring a variety of unusual characteristics and properties to the cyclo[18]carbon, which are quite worth to be explored. In this work, we present an extremely comprehensive and detailed investigation on almost all aspects of the cyclo[18]carbon, including (1) Geometric characteristics (2) Bonding nature (3) Electron delocalization and aromaticity (4) Intermolecular interaction (5) Reactivity (6) Electronic excitation and UV/Vis spectrum (7) Molecular vibration and IR/Raman spectrum (8) Molecular dynamics (9) Response to external field (10) Electron ionization, affinity and accompanied process (11) Various molecular properties. We believe that our full characterization of the cyclo[18]carbon will greatly deepen researchers' understanding of this system, and thereby help them to utilize it in practice and design its various valuable derivatives.

A Thorough Theoretical Exploration of Intriguing Characteristics of Cyclo[18]carbon: Geometry, Bonding Nature, Aromaticity, Weak Interaction, Reactivity, Excited States, Vibrations, Molecular Dynamics and Various Molecular Properties

2019 ◽  
Author(s):  
Tian Lu ◽  
Qinxue Chen ◽  
Zeyu Liu
Keyword(s):  
Molecular Dynamics ◽  
Excited States ◽  
Electronic Excitation ◽  
Ring Structure ◽  
Molecular Properties ◽  
Molecular Vibration ◽  
Full Characterization ◽  
Long Time ◽  
Almost All

Although cyclo[18]carbon has been theoretically and experimentally investigated since long time ago, only very recently it was prepared and directly observed by means of STM/AFM in condensed phase (Kaiser et al., <i>Science</i>, <b>365</b>, 1299 (2019)). The unique ring structure and dual 18-center π delocalization feature bring a variety of unusual characteristics and properties to the cyclo[18]carbon, which are quite worth to be explored. In this work, we present an extremely comprehensive and detailed investigation on almost all aspects of the cyclo[18]carbon, including (1) Geometric characteristics (2) Bonding nature (3) Electron delocalization and aromaticity (4) Intermolecular interaction (5) Reactivity (6) Electronic excitation and UV/Vis spectrum (7) Molecular vibration and IR/Raman spectrum (8) Molecular dynamics (9) Response to external field (10) Electron ionization, affinity and accompanied process (11) Various molecular properties. We believe that our full characterization of the cyclo[18]carbon will greatly deepen researchers' understanding of this system, and thereby help them to utilize it in practice and design its various valuable derivatives.

The Analyses of Learning Strategies in English as a Second Language: Theoretical Classification and Measurement Test

2020 ◽  
Vol 4 (2) ◽  
pp. 118-129
Author(s):  
Asti Gumartifa ◽  
◽  
Indah Windra Dwie Agustiani
Keyword(s):  
Language Learning ◽  
Learning Outcomes ◽  
Learning Strategies ◽  
Learning Process ◽  
English Learners ◽  
English Language ◽  
Point Of View ◽  
Effective Learning ◽  
The Impact

Gaining English language learning effectively has been discussed all years long. Similarly, Learners have various troubles outcomes in the learning process. Creating a joyful and comfortable situation must be considered by learners. Thus, the implementation of effective learning strategies is certainly necessary for English learners. This descriptive study has two purposes: first, to introduce the classification and characterization of learning strategies such as; memory, cognitive, metacognitive, compensation, social, and affective strategies that are used by learners in the classroom and second, it provides some questionnaires item based on Strategy of Inventory for Language Learning (SILL) version 5.0 that can be used to examine the frequency of students’ learning strategies in the learning process. The summary of this study explains and discusses the researchers’ point of view on the impact of learning outcomes by learning strategies used. Finally, utilizing appropriate learning strategies are certainly beneficial for both teachers and learners to achieve the learning target effectively.

scholarly journals Modulation of Gut Microbiota and Oxidative Status by β-Carotene in Late Pregnant Sows

2020 ◽  
Vol 7 ◽  
Author(s):  
Xupeng Yuan ◽  
Jiahao Yan ◽  
Ruizhi Hu ◽  
Yanli Li ◽  
Ying Wang ◽  
...  
Keyword(s):  
Gut Microbiota ◽  
Dietary Supplementation ◽  
Basal Diet ◽  
Fecal Microbiota ◽  
Control Group ◽  
Metabolic Activities ◽  
The Impact ◽  
Positive Effect ◽  
Β Carotene

Recent evidences suggest that gut microbiota plays an important role in regulating physiological and metabolic activities of pregnant sows, and β-carotene has a potentially positive effect on reproduction, but the impact of β-carotene on gut microbiota in pregnant sows remains unknown. This study aimed to explore the effect and mechanisms of β-carotene on the reproductive performance of sows from the aspect of gut microbiota. A total of 48 hybrid pregnant sows (Landrace × Yorkshire) with similar parity were randomly allocated into three groups (n = 16) and fed with a basal diet or a diet containing 30 or 90 mg/kg of β-carotene from day 90 of gestation until parturition. Dietary supplementation of 30 or 90 mg/kg β-carotene increased the number of live birth to 11.82 ± 1.54 and 12.29 ± 2.09, respectively, while the control group was 11.00 ± 1.41 (P = 0.201). Moreover, β-carotene increased significantly the serum nitric oxide (NO) level and glutathione peroxidase (GSH-Px) activity (P &lt; 0.05). Characterization of fecal microbiota revealed that 90 mg/kg β-carotene increased the diversity of the gut flora (P &lt; 0.05). In particular, β-carotene decreased the relative abundance of Firmicutes including Lachnospiraceae AC2044 group, Lachnospiraceae NK4B4 group and Ruminococcaceae UCG-008, but enriched Proteobacteria including Bilophila and Sutterella, and Actinobacteria including Corynebacterium and Corynebacterium 1 which are related to NO synthesis. These data demonstrated that dietary supplementation of β-carotene may increase antioxidant enzyme activity and NO, an important vasodilator to promote the neonatal blood circulation, through regulating gut microbiota in sows.

scholarly journals Clonal approaches to understanding the impact of mutations on hematologic disease development

Blood ◽  
2019 ◽  
Vol 133 (13) ◽  
pp. 1436-1445 ◽  
Author(s):  
Jyoti Nangalia ◽  
Emily Mitchell ◽  
Anthony R. Green
Keyword(s):  
Somatic Mutations ◽  
Clonal Selection ◽  
Single Cells ◽  
Driver Mutations ◽  
Great Promise ◽  
Tumor Evolution ◽  
Disease Development ◽  
Hematopoietic Tissue ◽  
The Impact

Abstract Interrogation of hematopoietic tissue at the clonal level has a rich history spanning over 50 years, and has provided critical insights into both normal and malignant hematopoiesis. Characterization of chromosomes identified some of the first genetic links to cancer with the discovery of chromosomal translocations in association with many hematological neoplasms. The unique accessibility of hematopoietic tissue and the ability to clonally expand hematopoietic progenitors in vitro has provided fundamental insights into the cellular hierarchy of normal hematopoiesis, as well as the functional impact of driver mutations in disease. Transplantation assays in murine models have enabled cellular assessment of the functional consequences of somatic mutations in vivo. Most recently, next-generation sequencing–based assays have shown great promise in allowing multi-“omic” characterization of single cells. Here, we review how clonal approaches have advanced our understanding of disease development, focusing on the acquisition of somatic mutations, clonal selection, driver mutation cooperation, and tumor evolution.

Sign in / Sign up

Export Citation Format

Share Document