Correlation between structural and optical properties of π-conjugated acrylonitrile derivatives: Insights from X-ray, energy frameworks, TD-DFT and charge density analysis

2020 ◽  
Vol 1213 ◽  
pp. 128174 ◽  
Author(s):  
Mani Udayakumar ◽  
Margarita Cerón ◽  
Paulina Ceballos ◽  
M. Judith Percino ◽  
Subbiah Thamotharan
2016 ◽  
Vol 12 (3) ◽  
pp. 4394-4399
Author(s):  
Sura Ali Noaman ◽  
Rashid Owaid Kadhim ◽  
Saleem Azara Hussain

Tin Oxide and Indium doped Tin Oxide (SnO2:In) thin films were deposited on glass and Silicon  substrates  by  thermal evaporation technique.  X-ray diffraction pattern of  pure SnO2 and SnO2:In thin films annealed at 650oC and the results showed  that the structure have tetragonal phase with preferred orientation in (110) plane. AFM studies showed an inhibition of grain growth with increase in indium concentration. SEM studies of pure  SnO2 and  Indium doped tin oxide (SnO2:In) ) thin films showed that the films with regular distribution of particles and they have spherical shape.  Optical properties such as  Transmission , optical band-gap have been measured and calculated.


2015 ◽  
Vol 33 (4) ◽  
pp. 714-718 ◽  
Author(s):  
Neeraj K. Mishra ◽  
Chaitnaya Kumar ◽  
Amit Kumar ◽  
Manish Kumar ◽  
Pratibha Chaudhary ◽  
...  

AbstractA nanocomposite of 0.5SnO2–0.5Al2O3 has been synthesized using a sol-gel route. Structural and optical properties of the nanocomposite have been discussed in detail. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive X-ray diffraction spectroscopy confirm the phase purity and the particle size of the 0.5SnO2–0.5Al2O3 nanocomposite (13 to 15 nm). The scanning electron microscopy also confirms the porosity in the sample, useful in sensing applications. The FT-IR analysis confirms the presence of physical interaction between SnO2 and Al2O3 due to the slight shifting and broadening of characteristic bands. The UV-Vis analysis confirms the semiconducting nature because of direct transition of electrons into the 0.5SnO2–0.5Al2O3 nanocomposites.


2014 ◽  
Vol 989-994 ◽  
pp. 656-659
Author(s):  
Ping Cao ◽  
Yue Bai

Al co-doped ZnCoO thin film has been prepared by a sol-gel method. The structural and optical properties of the sample were investigated. X-ray diffraction and UV absorption spectroscopy analyses indicate that Al3+ and Co2+ substitute for Zn2+ without changing the wurtzite structure. With the Al doping, the visible emission increased and the UV emission decreased, which is attributed to the increase of O vacancies and Zn interstitials.


2017 ◽  
Vol 35 (11) ◽  
pp. 1102-1114 ◽  
Author(s):  
Morris Marieli Antoinette ◽  
S. Israel ◽  
G. Sathya ◽  
Arlin Jose Amali ◽  
John L. Berchmans ◽  
...  

2000 ◽  
Vol 650 ◽  
Author(s):  
Eduardo J. Alves ◽  
C. Liu ◽  
Maria F. da Silva ◽  
José C. Soares ◽  
Rosário Correia ◽  
...  

ABSTRACTIn this work we report the structural and optical properties of ion implanted GaN. Potential acceptors such as Ca and Er were used as dopants. Ion implantation was carried out with the substrate at room temperature and 550 °C, respectively. The lattice site location of the dopants was studied by Rutherford backscattering/channeling combined with particle induced X-ray emission. Angular scans along both [0001] and [1011] directions show that 50% of the Er ions implanted at 550 oC occupy substitutional or near substitutional Ga sites after annealing. For Ca we found only a fraction of 30% located in displaced Ga sites along the [0001] direction. The optical properties of the ion implanted GaN films have been studied by photoluminescence measurements. Er- related luminescence near 1.54 μm is observed under below band gap excitation at liquid helium temperature. The spectra of the annealed samples consist of multiline structures with the sharpest lines found in GaN until now. The green and red emissions were also observed in the Er doped samples after annealing.


Author(s):  
J. Damisa ◽  
J. O. Emegha ◽  
I. L. Ikhioya

Lead tin sulphide (Pb-Sn-S) thin films (TFs) were deposited on fluorine-doped tin oxide (FTO) substrates via the electrochemical deposition process using lead (II) nitrate [Pb(NO3)2], tin (II) chloride dehydrate [SnCl2.2H2O] and thiacetamide [C2H5NS] precursors as sources of lead (Pb), tin (Sn) and sulphur (S). The solution of all the compounds was harmonized with a stirrer (magnetic) at 300k. In this study, we reported on the improvements in the properties (structural and optical) of Pb-Sn-S TFs by varying the deposition time. We observed from X-ray diffractometer (XRD) that the prepared material is polycrystalline in nature. UV-Vis measurements were done for the optical characterizations and the band gap values were seen to be increasing from 1.52 to 1.54 eV with deposition time. In addition to this, the absorption coefficient and refractive index were also estimated and discussed.


2021 ◽  
Vol 2114 (1) ◽  
pp. 012012
Author(s):  
Tamara S. Hussein ◽  
Ala F. Ahmed

Abstract In this study, the effect of grafting with Iron (Fe) ratios (0.1, 0.3 and 0.5) on the structural and optical properties of cadmium oxide films (CdO) was studied, as these films were prepared on glass bases using the method of pulse laser deposition (PLD). The crystallization nature of the prepared films was examined by X-ray diffraction technique (XRD), which showed that the synthesis of the prepared films is polycrystalline, and Atomic Force Microscope (AFM) images also showed that the increased vaccination with Iron led to an increase in the crustal size ratio and a decrease in surface roughness, The absorption coefficient was calculated and the optical energy gap for the prepared thin films. It was found the absorption decreases and the energy gap decreases with the increase of doping ratio.


2013 ◽  
Vol 770 ◽  
pp. 225-228
Author(s):  
L. Uttayan ◽  
K. Aiempanakit ◽  
M. Horprathum ◽  
P. Eiamchai ◽  
V. Pattantsetakul ◽  
...  

Titanium dioxide (TiO2) films were prepared by thermal oxidation from Ti films. The Ti films were deposited on glass and silicon (100) wafer substrate by dc magnetron sputtering and subsequent with thermal oxidation process. The crystal structure and morphology of TiO2 films were estimated by using X-ray diffractometry (XRD) and field-emission scanning electron microscopy (FE-SEM), respectively. The optical property of TiO2 films was determined by UV-Visible spectrophotometer. The influences of annealing temperature between 200 to 500°C in air for 1 hour on the structure and optical properties of TiO2 films were investigated. The increasing of annealing temperature was directly affected the phase transition from Ti to TiO2. The optical and structural properties of TiO2 films are the best exhibited with increasing the annealing temperature at 500 °C.


2001 ◽  
Vol 101 (6) ◽  
pp. 1583-1628 ◽  
Author(s):  
Tibor S. Koritsanszky ◽  
Philip Coppens

Author(s):  
Mette Stokkebro Schmøkel ◽  
Lasse Bjerg ◽  
Finn Krebs Larsen ◽  
Jacob Overgaard ◽  
Simone Cenedese ◽  
...  

CoSb3is an example of a highly challenging case for experimental charge-density analysis due to the heavy elements (suitability factor of ∼0.01), the perfect crystallinity and the high symmetry of the compound. It is part of a family of host–guest structures that are potential candidates for use as high-performance thermoelectric materials. Obtaining and analysing accurate charge densities of the undoped host structure potentially can improve the understanding of the thermoelectric properties of this family of materials. In a previous study, analysis of the electron density gave a picture of covalent Co–Sb and Sb–Sb interactions together with relatively low atomic charges based on state-of-the-art experimental and theoretical data. In the current study, several experimental X-ray diffraction data sets collected on the empty CoSb3framework are compared in order to probe the experimental requirements for obtaining data of high enough quality for charge-density analysis even in the case of very unsuitable crystals. Furthermore, the quality of the experimental structure factors is tested by comparison with theoretical structure factors obtained from periodic DFT calculations. The results clearly show that, in the current study, the data collected on high-intensity, high-energy synchrotron sources and very small crystals are superior to data collected at conventional sources, and in fact necessary for a meaningful charge-density study, primarily due to greatly diminished effects of extinction and absorption which are difficult to correct for with sufficient accuracy.


Sign in / Sign up

Export Citation Format

Share Document