scholarly journals Experimental studies into the fluid dynamic performance of the coolant flow in the mixed core of the Temelin NPP VVER-1000 reactor

2015 ◽  
Vol 1 (3) ◽  
pp. 174-178
Author(s):  
S.M. Dmitriev ◽  
D.V. Doronkov ◽  
Ye.N. Polozkova ◽  
A.N. Pronin ◽  
V.D. Sorokin ◽  
...  
Keyword(s):  
Fluid Dynamic ◽  
Dynamic Performance ◽  
Experimental Studies ◽  
Coolant Flow

scholarly journals Experimental Investigation and Comparison of the Thermal Performance of Additively and Conventionally Manufactured Heat Exchangers

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 574
Author(s):  
Ana Vafadar ◽  
Ferdinando Guzzomi ◽  
Kevin Hayward
Keyword(s):  
Surface Roughness ◽  
Thermal Performance ◽  
Heat Exchangers ◽  
High Efficiency ◽  
Cooling System ◽  
Fluid Dynamic ◽  
Dynamic Performance ◽  
Experimental Studies ◽  
Manufacturing Method ◽  
Industrial Sectors

Air heat exchangers (HXs) are applicable in many industrial sectors because they offer a simple, reliable, and cost-effective cooling system. Additive manufacturing (AM) systems have significant potential in the construction of high-efficiency, lightweight HXs; however, HXs still mainly rely on conventional manufacturing (CM) systems such as milling, and brazing. This is due to the fact that little is known regarding the effects of AM on the performance of AM fabricated HXs. In this research, three air HXs comprising of a single fin fabricated from stainless steel 316 L using AM and CM methods—i.e., the HXs were fabricated by both direct metal printing and milling. To evaluate the fabricated HXs, microstructure images of the HXs were investigated, and the surface roughness of the samples was measured. Furthermore, an experimental test rig was designed and manufactured to conduct the experimental studies, and the thermal performance was investigated using four characteristics: heat transfer coefficient, Nusselt number, thermal fluid dynamic performance, and friction factor. The results showed that the manufacturing method has a considerable effect on the HX thermal performance. Furthermore, the surface roughness and distribution, and quantity of internal voids, which might be created during and after the printing process, affect the performance of HXs.

Virtual Evaluation for Machine Tool Design

2008 ◽  
Author(s):  
Masahiko Mori ◽  
Zachary I. Piner ◽  
Ke Ding ◽  
Adam Hansel
Keyword(s):  
Machine Tool ◽  
Fluid Dynamic ◽  
Dynamic Performance ◽  
Digital Simulation ◽  
Machining Accuracy ◽  
Analysis Model ◽  
Simulation Accuracy ◽  
Theoretical Simulation ◽  
Physical Experiments ◽  
Static Rigidity

This paper presents the virtual machine tool environment Mori Seiki established for the evaluation of static, dynamic, and thermal performance of Mori Seiki machine tools. In this system environment, machining accuracy and quality are the main focus for each individual analysis discipline. The structural analysis uses the Finite Element Method (FEM) to monitor and optimize the static rigidity of the machine tool. Correlation between physical experiments and digital simulation is conducted to validate and optimize the static simulation accuracy. To accurately evaluate and effectively optimize dynamic performance of the machine tool in the virtual environment, the critical modal parameters such as damping and stiffness are calibrated based on experimental procedures which results in precise setup of the frequency response models. Computational Fluid Dynamic (CFD) analysis model is built in the environment so that the thermal perspective of the machine tool is evaluated and thermal deformation is monitored. This paper demonstrates compatibility of the digital simulation with physical experiments and success in integrating theoretical simulation processes with practical Mori Seiki machine tool development.

scholarly journals Origin of chromitites in the Esker Intrusive Complex, Ring of Fire Intrusive Suite, as revealed by chromite trace element chemistry and simple crystallization models

2021 ◽  
Author(s):  
J M Brenan ◽  
K Woods ◽  
J E Mungall ◽  
R Weston
Keyword(s):  
Partition Coefficients ◽  
Fluid Dynamic ◽  
Experimental Studies ◽  
Wall Rock ◽  
Major And Trace Elements ◽  
Iron Formation ◽  
Intrusive Complex ◽  
Banded Iron Formation ◽  
Magma Flow ◽  
Intrusive Suite

To better constrain the origin of the chromitites associated with the Esker Intrusive Complex (EIC) of the Ring of Fire Intrusive Suite (RoFIS), a total of 50 chromite-bearing samples from the Black Thor, Big Daddy, Blackbird, and Black Label chromite deposits have been analysed for major and trace elements. The samples represent three textural groups, as defined by the relative abundance of cumulate silicate phases and chromite. To provide deposit-specific partition coefficients for modeling, we also report on the results of laboratory experiments to measure olivine- and chromite-melt partitioning of V and Ga, which are two elements readily detectable in the chromites analysed. Comparison of the Cr/Cr+Al and Fe/Fe+Mg of the EIC chromites and compositions from previous experimental studies indicates overlap in Cr/Cr+Al between the natural samples and experiments done at >1400oC, but significant offset of the natural samples to higher Fe/Fe+Mg. This is interpreted to be the result of subsolidus Fe-Mg exchange between chromite and the silicate matrix. However, little change in Cr/Cr+Al from magmatic values, owing to the lack of an exchangeable reservoir for these elements. A comparison of the composition of the EIC chromites and a subset of samples from other tectonic settings reveals a strong similarity to chromites from the similarly-aged Munro Township komatiites. Partition coefficients for V and Ga are consistent with past results in that both elements are compatible in chromite (DV = 2-4; DGa ~ 3), and incompatible in olivine (DV = 0.01-0.14; DGa ~ 0.02), with values for V increasing with decreasing fO2. Simple fractional crystallization models that use these partition coefficients are developed that monitor the change in element behaviour based on the relative proportions of olivine to chromite in the crystallizing assemblage; from 'normal' cotectic proportions involving predominantly olivine, to chromite-only crystallization. Comparison of models to the natural chromite V-Ga array suggests that the overall positive correlation between these two elements is consistent with chromite formed from a Munro Township-like komatiitic magma crystallizing olivine and chromite in 'normal' cotectic proportions, with no evidence of the strong depletion in these elements expected for chromite-only crystallization. The V-Ga array can be explained if the initial magma responsible for chromite formation is slightly reduced with respect to the FMQ oxygen buffer (~FMQ- 0.5), and has assimilated up to ~20% of wall-rock banded iron formation or granodiorite. Despite the evidence for contamination, results indicate that the EIC chromitites crystallized from 'normal' cotectic proportions of olivine to chromite, and therefore no specific causative link is made between contamination and chromitite formation. Instead, the development of near- monomineralic chromite layers likely involves the preferential removal of olivine relative to chromite by physical segregation during magma flow. As suggested for some other chromitite-forming systems, the specific fluid dynamic regime during magma emplacement may therefore be responsible for crystal sorting and chromite accumulation.

scholarly journals Investigation of Coolant Local Hydrodynamics in the Mixed Core of the VVER Reactor

2020 ◽  
Vol 63 (2) ◽  
pp. 151-162
Author(s):  
S. M. Dmitriev ◽  
A. V. Gerasimov ◽  
A. A. Dobrov ◽  
D. V. Doronkov ◽  
A. N. Pronin ◽  
...  
Keyword(s):  
Cross Sections ◽  
Experimental Studies ◽  
Reactor Core ◽  
Cross Flow ◽  
Coolant Flow ◽  
Vver Reactor ◽  
Computational Hydrodynamics ◽  
Cross Section Area ◽  
Fuel Assemblies ◽  
Flow Pressure

The article presents the results of experimental studies of the local hydrodynamics of the coolant flow in the mixed core of the VVER reactor, consisting of the TVSA-T and TVSA-T mod.2 fuel assemblies. Modeling of the flow of the coolant flow in the fuel rod bundle was carried out on an aerodynamic test stand. The research was carried out on a model of a fragment of a mixed core of a VVER reactor consisting of one TVSA-T segment and two segments of the TVSA-T.mod2. The flow pressure fields were measured with a five-channel pneumometric probe. The flow pressure field was converted to the direction and value of the coolant velocity vector according to the dependencies obtained during calibration. To obtain a detailed data of the flow, a characteristic cross-section area of the model was selected, including the space cross flow between fuel assemblies and four rows of fuel rods of each of the TVSA fuel assemblies. In the framework of this study the analysis of the spatial distribution of the projections of the velocity of the coolant flow was fulfilled that has made it possible to pinpoint regularities that are intrinsic to the coolant flowing around spacing, mixing and combined spacing grates of the TVSA. Also, the values of the transverse flow of the coolant caused by the flow along hydraulically nonidentical grates were determined and their localization in the longitudinal and cross sections of the experimental model was revealed. Besides, the effect of accumulation of hydrodynamic flow disturbances in the longitudinal and cross sections of the model caused by the staggered arrangement of hydraulically non-identical grates was determined. The results of the study of the coolant cross flow between fuel assemblies interaction, i.e. between the adjacent TVSA-T and TVSA-T mod.2 fuel assemblies were adopted for practical use in the JSC of “Afrikantov OKB Mechanical Engineering” for assessing the heat engineering reliability of VVER reactor cores; also, they were included in the database for verification of computational hydrodynamics programs (CFD codes) and for detailed cell-based calculation of the reactor core.

scholarly journals Up, down, or sideways: emplacement of magmatic Fe–Ni–Cu–PGE sulfide melts in large igneous provinces

2019 ◽  
Vol 56 (7) ◽  
pp. 756-773 ◽  
Author(s):  
C.M. Lesher
Keyword(s):  
Fluid Dynamic ◽  
Experimental Studies ◽  
Natural Systems ◽  
Large Igneous Provinces ◽  
Ultimate Explanation ◽  
Preferential Localization ◽  
Igneous Provinces ◽  
Sulfide Melt ◽  
Analog Systems ◽  
Almost All

The preferential localization of Fe–Ni–Cu–PGE sulfides within the horizontal components of dike–sill–lava flow complexes in large igneous provinces (LIPs) indicates that they were fluid dynamic traps for sulfide melts. Many authors have interpreted them to have collected sulfide droplets transported upwards, often from deeper “staging chambers”. Although fine (<1–2 cm) dilute (<10%–15%) suspensions of dense (∼4–5 g/cm3) sulfide melt can be transported in ascending magmas, there are several problems with upward-transport models for almost all LIP-related deposits: (1) S isotopic data are consistent with nearby crustal sources, (2) xenoliths appear to be derived from nearby rather than deeper crustal sources, (3) lateral sheet flow or sill facies of major deposits contain few if any sulfides, (4) except where there is evidence for a local S source, sulfides or chalcophile element enrichments rarely if ever occur in the volcanic components even where there is mineralization in the subvolcanic plumbing system, and (5) some lavas are mildly to strongly depleted in PGE >>> Cu > Ni > Co, indicating that unerupted sulfides sequestered PGEs at depth. Two potential solutions to this paradox are that (i) natural systems contained surfactants that lowered sulfide–silicate interfacial tensions, permitting sulfide melts to coalesce and settle more easily than predicted from theoretical/experimental studies of artificial/analog systems, and (or) (ii) sulfides existed not as uniformly dispersed droplets, as normally assumed, but as fluid-dynamically coherent pseudoslugs or pseudolayers that were large and dense enough that they could not be transported upwards. Regardless of the ultimate explanation, it seems likely that most high-grade Ni–Cu–PGE sulfide deposits in LIPs formed at or above the same stratigraphic levels as they are found.

Empirical Optimization of High Density Plate-Fin Heat Sink for Constant Pumping Power in Low Profile Cooling Application

2005 ◽  
Author(s):  
Kazuaki Yazawa ◽  
Tatsuro Yoshida ◽  
Shinji Nakagawa ◽  
Masaru Ishizuka
Keyword(s):  
Fluid Dynamic ◽  
Dynamic Performance ◽  
High Heat ◽  
Heat Sinks ◽  
High Heat Flux ◽  
Pumping Power ◽  
Low Profile ◽  
Data Points ◽  
Narrow Space ◽  
The Impact

Since the VLSI processors are increasing power in accordance with exponential law, cooling solutions for such as personal computers have been evolving for over a decade. Recent heat sinks are designed with high dense fins and low profile to adapt to a high heat flux source within a slim enclosure. To achieve such compact cooling solution, thin fin and small gap is desirable. In addition, the pumping power is also limited by the allowable narrow space for fans. Thus it is important to minimize the thermal resistance for given pumping power that we define the optimum. Due to the lack of literatures on topic of low profile and high dense fins experiments, an apparatus was specially built to measure the thermal and fluid dynamic performance at the same time. Since such a high dense fin arrangement requires extra space on the sides by manufacturing reasons, the impact of bypass flow needs to be considered. The experiments are carefully carried out and the results are precisely compared with numerical analysis. The numerical model aiming to find the optimum for given pumping power is discussed with extrapolating the data points. This report is concluded with the best configuration of plate fins of low profile heat sinks for a given fan performance.

A Fluid Dynamics Study of a Modified Low-Reynolds-Number Flapping Motion

2010 ◽  
Author(s):  
M. R. Amiralaei ◽  
H. Alighanbari ◽  
S. M. Hashemi
Keyword(s):  
Fluid Dynamics ◽  
Reynolds Number ◽  
Phase Angle ◽  
Fluid Dynamic ◽  
Low Reynolds Number ◽  
Dynamic Performance ◽  
Navier Stokes ◽  
Fluid Forces ◽  
Low Reynolds ◽  
Volume Method

The objective of the present study is to investigate the low Reynolds number (LRN) fluid dynamics of an elliptic airfoil performing a novel figure-eight-like motion. To this mean, the influence of phase angle between the pitching and translational (heaving and lagging) motions and the amplitude of translational motions on the fluid flow is simulated. Navier-Stokes (NS) equations with Finite Volume Method (FVM) are used and the instantaneous force coefficients and the fluid dynamics performance, as well as the corresponding vortical structures are analyzed. Both the phase angle and the amplitudes of horizontal and vertical motions are of great importance to the fluid dynamic characteristics of the model as they are shown to change the peaks of the fluid forces, fluid dynamic performance, and the vortical patterns around the model.

The influence of nozzle deflection on fluid dynamic and infrared characteristics of a two-dimensional convergent–divergent vectoring exhaust system

2019 ◽  
Vol 233 (12) ◽  
pp. 4646-4662
Author(s):  
Hao Wang ◽  
Honghu Ji ◽  
Haohao Lu
Keyword(s):  
Mass Flow ◽  
Infrared Radiation ◽  
Deflection Angle ◽  
Thrust Force ◽  
Fluid Dynamic ◽  
Dynamic Performance ◽  
Exhaust System ◽  
Two Dimensional ◽  
Radiation Characteristics ◽  
Significant Information

Superior maneuverability and good infrared stealthy properties are two key points of the future aircraft. A two-dimensional convergent–divergent (2D-CD) vectoring exhaust system can improve the maneuverability of aircrafts and has been widely applied to the latest generation aircrafts. Understanding fluid dynamic and infrared radiation characteristics of the 2D-CD vectoring exhaust systems under different conditions of the nozzle deflection is very crucial, which can provide significant information for the suppression of the infrared radiation property of the 2D-CD vectoring exhaust system. In this paper, by means of computational fluid dynamics, the fluid dynamic and infrared radiation characteristics of the 2D-CD vectoring exhaust system are studied at subsonic cruise status with nozzle deflection angles from 0 to 20°, and the results are compared with those of the baseline axisymmetric exhaust system. The results indicate that the fluid dynamic performance of a properly designed 2D-CD vectoring exhaust system is equivalent to the fluid dynamic performance of the baseline axisymmetric exhaust system. When the nozzle deflection angle is less than 5°, the mass flow and thrust force of the 2D-CD vectoring exhaust system are almost unchanged, and with the increase of the nozzle deflection angles, the mass flow and thrust force decrease rapidly. The thrust force deflection angles lag behind the nozzle deflection angles all the time, and as the nozzle deflection angle increases, the difference between them decreases. The direction of the maximum infrared radiation of the 2D-CD vectoring exhaust system deflects with the deflection of the nozzle, and the mean integrated infrared radiation intensity of the exhaust system decreases with the increase of nozzle deflection angles.

Sign in / Sign up

Export Citation Format

Share Document