Numerical study on the flow characteristics of tidal jets induced by a tidal-jet-generator

Abdominal aortic aneurysm (AAA) is a degenerative disease defined as the abnormal ballooning of the abdominal aorta (AA) wall which is usually caused by atherosclerosis. The aneurysm grows larger and eventually ruptures if it is not diagnosed and treated. Aneurysms occur mostly in the aorta, the main artery of the chest and abdomen. The aorta carries blood flow from the heart to all parts of the body, including the vital organs, the legs, and feet. The objective of the present study is to investigate the combined effects of aneurysm and curvature on flow characteristics in S-shaped bends with sweep angle of 90° at Reynolds number of 900. The fluid mechanics of blood flow in a curved artery with abnormal aortic is studied through a mathematical analysis and employing Cosmos flow simulation. Blood is modeled as an incompressible non-Newtonian fluid and the flow is assumed to be steady and laminar. Hemodynamic characteristics are analyzed. Grid independence is tested on three successively refined meshes. It is observed that the abrupt expansion induced by AAA results in an immensely disturbed regime. The results may have implications not only for understanding the mechanical behavior of the blood flow inside an aneurysm artery but also for investigating the mechanical behavior of the blood flow in different arterial diseases, such as atherosclerosis.

Download Full-text

Numerical study on flow characteristics at blade passage and tip clearance in a linear cascade of high performance turbine blade

KSME International Journal ◽

10.1007/bf02984462 ◽

2003 ◽

Vol 17 (4) ◽

pp. 606-616 ◽

Cited By ~ 2

Author(s):

Hyon Kook Myong ◽

Seung Yong Yang

Keyword(s):

Turbine Blade ◽

High Performance ◽

Numerical Study ◽

Flow Characteristics ◽

Tip Clearance ◽

Blade Passage ◽

Linear Cascade

Download Full-text

A Numerical Study of the Flow Characteristics and Separation Efficiency of a Hydrocyclone

KSCE Journal of Civil Engineering ◽

10.1007/s12205-018-1780-1 ◽

2018 ◽

Vol 22 (11) ◽

pp. 4272-4281 ◽

Cited By ~ 4

Author(s):

Ik-Tae Im ◽

Gyu Dong Gwak ◽

Se Min Kim ◽

Young Ki Park

Keyword(s):

Separation Efficiency ◽

Numerical Study ◽

Flow Characteristics

Download Full-text

Numerical Study of Heat Transfer Intensification in a Circular Tube Using a Thin, Radiation-Absorbing Insert. Part 1: Thermo-Hydraulic Characteristics

Energies ◽

10.3390/en14154596 ◽

2021 ◽

Vol 14 (15) ◽

pp. 4596

Author(s):

Piotr Bogusław Jasiński

Keyword(s):

Heat Transfer ◽

Flow Resistance ◽

Numerical Study ◽

Flow Characteristics ◽

Cylindrical Tube ◽

Radiation Absorption ◽

Fluid Temperature ◽

Gas Temperature ◽

Insert Size ◽

Channel Diameter

The presented paper, which is the first of two parts, shows the results of numerical investigations of a heat exchanger channel in the form of a cylindrical tube with a thin insert. The insert, placed concentrically in the pipe, uses the phenomenon of thermal radiation absorption to intensify the heat transfer between the pipe wall and the gas. Eight geometric configurations of the insert size were numerically investigated using CFD software, varying its diameter from 20% to 90% of the pipe diameter and obtaining the thermal-flow characteristics for each case. The tests were conducted for a range of numbers Re = 5000–100,000 and a constant temperature difference between the channel wall and the average gas temperature of ∆T = 100 °C. The results show that the highest increase in the Nu number was observed for the inserts with diameters of 0.3 and 0.4 of the channel diameter, while the highest flow resistance was noted for the inserts with diameters of 0.6–0.7 of the channel diameter. The f/fs(Re) and Nu/Nus(Re) ratios are shown on graphs indicating how much the flow resistance and heat transfer increased compared to the pipe without an insert. Two methods of calculating the Nu number are also presented and analysed. In the first one, the average fluid temperature of the entire pipe volume was used to calculate the Nu number, and in the second, only the average fluid temperature of the annular portion formed by the insert was used. The second one gives much larger Nu/Nus ratio values, reaching up to 8–9 for small Re numbers.

Download Full-text

Numerical Study on Flow Characteristics in High Multi-Stage Pressure Reducing Valve

Volume 1A, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery ◽

10.1115/fedsm2017-69210 ◽

2017 ◽

Author(s):

Fu-qiang Chen ◽

Zhi-xin Gao ◽

Jin-yuan Qian ◽

Zhi-jiang Jin

Keyword(s):

Energy Consumption ◽

Numerical Study ◽

Research Work ◽

Flow Characteristics ◽

Temperature Fields ◽

Turbulent Dissipation ◽

Technological Support ◽

Multi Stage ◽

Valve Opening ◽

Pressure Reducing Valve

In this paper, a new high multi-stage pressure reducing valve (HMSPRV) is proposed. The main advantages include reducing noise and vibration, reducing energy consumption and dealing with complex conditions. As a new high pressure reducing valve, its flow characteristics need to be investigated. For that the valve opening has a great effect on steam flow, pressure reduction and energy consumption, thus different valve openings are taken as the research points to investigate the flow characteristics. The analysis is conducted from four aspects: pressure, velocity, temperature fields and energy consumption. The results show that valve opening has a great effect on flow characteristics. No matter for pressure, velocity or temperature field, the changing gradient mainly reflects at those throttling components for all valve openings. For energy consumption, in the study of turbulent dissipation rate, it can be found that the larger of valve opening, the larger of energy consumption. It can be concluded that the new high multi-stage pressure reducing valve works well under complex conditions. This study can provide technological support for achieving pressure regulation, and benefit the further research work on energy saving and multi-stage design of pressure reducing devices.

Download Full-text

Experimental and Numerical Study of Honeycomb Tip on Suppressing Tip Leakage Flow in Turbine Cascade

Volume 2A: Turbomachinery ◽

10.1115/gt2017-64942 ◽

2017 ◽

Cited By ~ 4

Author(s):

Yunfeng Fu ◽

Fu Chen ◽

Huaping Liu ◽

Yanping Song

Keyword(s):

Numerical Study ◽

Flow Characteristics ◽

Leakage Flow ◽

Exit Section ◽

Turbine Cascade ◽

Tip Leakage Flow ◽

Physical Processes ◽

Tip Leakage ◽

Gap Height ◽

Positive Effect

In this paper, the effect of a novel honeycomb tip on suppressing tip leakage flow in a highly-loaded turbine cascade has been experimentally and numerically studied. The research focuses on the mechanisms of honeycomb tip on suppressing tip leakage flow and affecting the secondary flow in the cascade, as well as the influences of different clearance heights on leakage flow characteristics. In addition, two kinds of local honeycomb tip structures are pro-posed to explore the positive effect on suppressing leakage flow in simpler tip honeycomb structures. Based on the experimental and numerical results, the physical processes of tip leakage flow and its interaction with main flow are analyzed, the following conclusions can be obtained. Honeycomb tip rolls up a number of small vortices and radial jets in regular hexagonal honeycomb cavities, increasing the flow resistance in the clearance and reducing the velocity of leakage flow. As a result, the structure of honeycomb tip not only suppresses the leakage flow effectively, but also has positive effect on reducing the associated losses in cascade by reducing the strength of leakage vortex. Compare to the flat tip cascade at 1%H gap height, the relative leakage flow in honeycomb tip cascade reduces from 3.05% to 2.73%, and the loss at exit section is also decreased by 10.63%. With the increase of the gap height, the tip leakage flow and loss have variations of direct proportion with it, but their growth rates in the honeycomb tip cascade are smaller. Consider the abradable property of the honeycomb seal, a smaller gap height is allowed in the cascade with honeycomb tip, and that means honeycomb tip has better effect on suppressing leakage flow. Two various local honeycomb tip structures has also been discussed. It shows that local raised honeycomb tip has better suppressing leakage flow effect than honeycomb tip, while local concave honeycomb tip has no more effect than honeycomb tip. Compare to flat tip cascade, the leakage flow in honeycomb tip cascade, local concave tip cascade and local raised honeycomb tip cascade decrease by nearly 17.33%, 15.51% and 30.86% respectively, the losses at exit section is reduced by 13.38%, 12% and 28.17% respectively.

Download Full-text

3D Numerical Study of the Flow Properties in a Double-Spur Dikes Field during a Flood Process

Water ◽

10.3390/w10111574 ◽

2018 ◽

Vol 10 (11) ◽

pp. 1574 ◽

Cited By ~ 1

Author(s):

Xun Han ◽

Pengzhi Lin

Keyword(s):

Water Surface ◽

Numerical Study ◽

Flow Characteristics ◽

Field Measurements ◽

Navier Stokes ◽

Eddy Simulation ◽

River Bed ◽

Hydrodynamic Evolution ◽

Spur Dikes ◽

Potential Damage

A 3D numerical model is developed to study the flow characteristics of a double-spur dikes field on Yangtze River during a flood process, which was presented by the variation of the flow condition. The model is based on Navier–Stokes (NS) equations, the porous medium method (PMM) is employed to treat the solid structures including the river bed surface, the volume of fluid (VOF) method is applied to track the motion of the water surface during the flood process, and large eddy simulation (LES) is adopted to capture the turbulence transport and dissipation. Using this model, the target reach’s flow field before the construction of double-spur dikes is simulated first, while the numerical results are compared to the field measurements on flow velocity and water surface level, and fairly good agreements are shown. Then, the model is applied to reproduce the hydrodynamic evolution during a flood process after double-spur dikes’ constructions, while the detailed 3D flow fields are obtained under some certain states with different submergence rates of the spur dikes; finally, the potential damage positions around these spur dikes are analyzed accordingly.

Download Full-text

Optimized Chaotic Heat Exchanger Configurations for Process Industry: A Numerical Study

Volume 1B, Symposia: Fluid Machinery; Fluid Power; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Flow Manipulation and Active Control: Theory, Experiments and Implementation; Fundamental Issues and Perspectives in Fluid Mechanics ◽

10.1115/fedsm2013-16115 ◽

2013 ◽

Cited By ~ 2

Author(s):

Akram Ghanem ◽

Thierry Lemenand ◽

Dominique Della Valle ◽

Hassan Peerhossaini

Keyword(s):

Heat Transfer ◽

Heat Exchanger ◽

Numerical Study ◽

Three Dimensional ◽

Flow Characteristics ◽

Process Intensification ◽

Point Of View ◽

Square Duct ◽

Square Channel ◽

Duct Geometry

A numerical investigation of chaotic laminar flow and heat transfer in isothermal-wall square-channel configurations is presented. The computations, based on a finite-volume method with the SIMPLEC algorithm, are conducted in terms of Péclet numbers ranging from 7 to 7×105. The geometries, based on the split-and-recombine (SAR) principle, are first proposed for micromixing purposes, and are then optimized and scaled up to three-dimensional minichannels with 3-mm sides that are capable of handling industrial fluid manipulation processes. The aim is to assess the feasibility of this mass- and heat-transfer technique for out-of-laboratory commercial applications and to compare different configurations from a process intensification point of view. The effects of the geometry on heat transfer and flow characteristics are examined. Results show that the flux recombination phenomenon mimicking the baker’s transform in the SAR-1 and SAR-2 configurations produces chaotic structures and promotes mass transfer. This phenomenon also accounts for higher convective heat transfer exemplified by increased values of the Nusselt number compared to the chaotic continuous-flow configuration and the baseline plain square-duct geometry. Energy expenditures are explored and the overall heat transfer enhancement factor for equal pumping power is calculated. The SAR-2 configuration reveals superior heat-transfer characteristics, enhancing the global gain by up to 17-fold over the plain duct heat exchanger.

Download Full-text