Stability studies of collagen-based microspheres with Calendula officinalis flower extract

2019 ◽  
Vol 163 ◽  
pp. 214-219 ◽  
Author(s):  
Justyna Kozlowska ◽  
Natalia Stachowiak ◽  
Weronika Prus
2021 ◽  
Vol 10 (1) ◽  
pp. 11-19
Author(s):  
Ivan Savić ◽  
Ivana Savić-Gajić

Pot marigold flower extract (Calendula officinalis L.) has pharmacological properties due to the presence of various bioactive compounds. It is known that the extract has antioxidant, anti-inflammatory, antitumor, antibacterial, antifungal, antiviral, antimutagenic, antidermatitis properties, etc. The aim of this study was to improve the quality of the selected topical formulation by adding the ethanolic extract of pot marigold flower, as well as to monitor its stability. The topical formulation was water-in-oil emulsion prepared using the hot/hot emulsification process with an oil phase consisting of Vaseline, lanolin, and almond oil. The extract, prepared by ultrasound-assisted extraction, had an antioxidants content of 3.512 g gallic acid equivalent per 100 g-1 of dry weight and the half-maximal inhibitory concentration of 0.14 mg mL-1 determined by the DPPH assay. Chemical stability studies have shown that daylight has no significant effect on the stability of antioxidants in the extract, while an increase in temperature leads to their degradation. The shelf-life of the extract is about 8 months at 4 °C and 3 months at 22 °C (room temperature). The prepared uncategorized topical formulations containing 1% and 2% (w/w) pot marigold extract were stable at different temperatures during the storage. The uncategorized formulations showed antioxidant activity, but the activity of the extract in the formulations decreased with increasing storage temperature. Pot marigold flower extract and the developed uncategorized formulations showed an inhibitory effect on Gram-positive (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae), as well as on Candida albicans. The uncategorized formulations with this activity can be used in the treatment of skin infection.


Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 745 ◽  
Author(s):  
Weronika Prus-Walendziak ◽  
Justyna Kozlowska

This study aimed at designing emulsion films based on sodium alginate, gelatin, and glycerol, and their modification by the addition of lipids (cottonseed oil and beeswax). Film composition with the most promising properties was further modified by the incorporation of polylactide (PLA) microparticles with Calendula officinalis flower extract. PLA microspheres were obtained by the emulsion/solvent evaporation method. The size distribution of oily particles in emulsions was investigated. Mechanical properties, moisture content, UV-Vis spectra, and the color of films were analyzed, while biophysical skin parameters were assessed after their application to the skin. Moreover, the contact angles were measured, and the surface free energy of polymeric films was determined. An investigation of the amount of Calendula officinalis flower extract which can be incorporated into PLA microparticles was performed. The modification of the composition of films significantly influenced their physicochemical properties. The selected active ingredient in the form of plant extract was successfully incorporated into polymeric microparticles that were further added into the developed emulsion film. The condition of the skin after the application of obtained emulsion films improved. The prepared materials, especially containing microparticles with plant extract, can be considered for designing new cosmetic forms, such as cosmetic masks, as well as new topical formulations for pharmaceutical delivery.


Processes ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 530
Author(s):  
Justyna Kozlowska ◽  
Bartosz Tylkowski ◽  
Natalia Stachowiak ◽  
Weronika Prus-Walendziak

Human skin has protective functions and it is a barrier that protects the interior of the body from harmful environmental factors and pathogen penetration. An important role of the skin is also to prevent the loss of water from the body and if the skin barrier is damaged, the amount of water emitted from the internal environment is increased. Therefore, it is crucial to recovery and maintenance of epidermal barrier integrity. The aim of the current work was to encapsulate Calendula officinalis flower extract in gelatin microspheres and then incorporation microspheres into thin polymeric films made from sodium alginate or mixture of sodium alginate and starch. Such materials may find applications in the cosmetic field for example in the preparation of masks for skin, according to the Calendula officinalis flower extract wide influence on skin condition. Thus, the release profile of this extract from the materials was tested under conditions corresponding to the skin (pH 5.4, 37 °C). The mechanical properties, surface free energy, and moisture content of obtained films were measured. To determine the barrier quality of the stratum corneum, transepidermal water loss (TEWL) and skin color measurements were performed. The loaded microspheres were successfully incorporated into polymeric films without affecting its useful properties. Although the values of Young’s modulus and the moisture content were decreased after film modification by microspheres addition, the skin parameters were much better after application of films with microspheres. The results confirmed that obtained materials can be potentially used in cosmetics to improve the skin barrier quality.


2019 ◽  
Vol 68 (3-4) ◽  
pp. 92-102
Author(s):  
Filip Benko ◽  
Valentína Palkovičová ◽  
Michal Ďuračka ◽  
Július Árvay ◽  
Norbert Lukáč ◽  
...  

Summary The aim of our study was evaluation of potential antioxidant effects of marigold (Calendula officinalis) extract and assessment of its in vitro impact on the selected quality parameters of bovine spermatozoa. Marigold is medicinal herb from the family Asteraceae native to southern Europe, and it commonly used in pharmacology and medicine. Its well-known positive properties include antioxidant, antibacterial, antiflammatory, antiviral, antifungal, antihelmintic and wound-healing activities. In this study, the flower extracts were subjected to high performance liquid chromatography (HPLC), which identified especially phenolic acids (rosmarinic and chlorogenic acids) and polyphenols (rutin, kaempferol, resveratrol, quercetin and apigenin). These substances are known for their antioxidant activity and protective effects against oxidative stress. For our experiments, 10 samples of semen from sexually mature Holstein bulls were collected on a single day by using an artificial vagina, diluted in physiological saline solution and exposed to solutions with different concentration of marigold flower extract (75, 150 and 300 µg/mL). Selected quality parameters (motility, mitochondrial activity, production of reactive oxygen species – ROS, protein oxidation and lipid peroxidation – LPO) were analyzed after 0, 2 and 24 hours of in vitro culture. The motility evaluation was performed by using the computer-assisted sperm analysis (CASA) method. This method revealed that 75 and 150 µg/mL extract had positive effects and increased the motility (P<0.01) and mitochondrial activity (P<0.0001) of bovine spermatozoa compared to the control group following 2 and 24 hours. This phenomenon was observed also in case of ROS production, protein oxidation and LPO. Marigold extract concentrations of 75 and 150 µg/mL decreased the levels of ROS, protein oxidation and damage to the membranes caused by LPO compared to the control group (P<0.05; P<0.01) at time 2 and 24 hours. At the same time, 300 µg/mL extract exhibited positive, although less significant, effects compared to 75 and 150 µg/mL extracts. The data acquired from our study confirm that 75 and 150 µg/mL of marigold flower extract have positive effects on the motility and mitochondrial activity of bovine spermatozoa, and decrease ROS generation, LPO and protein oxidation in spermatozoa. Based on our results, the flower extract from marigold could be used for protection against oxidative stress in in vitro cultures of male gametes.


Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 950
Author(s):  
Weronika Prus-Walendziak ◽  
Justyna Kozlowska

Researchers are constantly searching for innovations that can be applied to the cosmetic industry. Production of porous materials stored in a lyophilized form and swollen directly before use may be beneficial considering their facilitated packaging, transport and storage. In this study, we propose porous materials based on sodium alginate, gelatin, glycerol and lipids (cottonseed oil and beeswax) obtained by freeze-drying and cross-linking. Material composition with the most promising properties was modified by the addition of PLA microparticles with Calendula officinalis flower extract. The structure and properties of obtained porous materials were analyzed. ATR-FTIR, mechanical properties, residual moisture content, porosity and density were assessed, as well as swelling properties and degradation after their cross-linking. The loading capacity and in vitro release of Calendula officinalis flower extract were performed for samples with incorporated PLA microparticles containing plant extract. The modification of the composition and fabrication method of materials significantly influenced their physicochemical properties. The selected plant extract was successfully incorporated into polymeric microparticles that were subsequently added into developed materials. Prepared materials may be considered during designing new cosmetic formulations.


Author(s):  
Esmaeel Ebrahimi ◽  
Alireza Kheirollah ◽  
Esrafil Mansouri ◽  
Hossein Babaahmadi-Rezaei ◽  
Ghorban Mohammadzadeh

Sign in / Sign up

Export Citation Format

Share Document