The crystalline structure of gadolinium oxide nanoparticles (Gd2O3-NPs) synthesized at different temperatures via X-ray diffraction (XRD) technique

2021 ◽  
Vol 179 ◽  
pp. 109212
Author(s):  
Fathyah Whba ◽  
Faizal Mohamed ◽  
Nur Ratasha Alia Md Rosli ◽  
Irman Abdul Rahman ◽  
Mohd Idzat Idris
Keyword(s):  
Crystalline Structure ◽  
Gadolinium Oxide ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Temperatures ◽  
Gadolinium Oxide Nanoparticles

scholarly journals Structural and electrical studies on zinc added magnesium oxide nanoparticles

2020 ◽  
Vol 31 (3) ◽  
pp. 73-86
Author(s):  
Sumithraj Premkumar P. ◽  
Keyword(s):  
Magnesium Oxide ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
Mgo Nanoparticles ◽  
X Ray ◽  
Electrical Studies ◽  
Magnesium Oxide Nanoparticles ◽  
Different Temperatures ◽  
Crystalline Nature ◽  
Scanning Electron

Magnesium oxide (MgO, pure) and zinc added MgO nanoparticles were synthesised by a simple microwave assisted solvothermal method. The concentrations of impurity used in the present work were 0.25 M and 0.50 M. All samples were annealed at 400°C for 1 h to improve the ordering. The prepared pure and zinc added magnesium oxide nanoparticles were characterised by powder X-ray diffraction (PXRD), energy dispersive spectroscopy (EDS) and scanning electron microscopy (SEM). PXRD studies of pure and zinc added MgO nanoparticles showed that all samples belong to crystalline nature with cubic structure. The grain size of all samples were determined from the XRD results and it belongs to nano meter scale. The EDS confirmed the presence of zinc, magnesium and oxide elements in the respective prepared samples. The scanning electron microscope images confirmed that the prepared samples possess nanometer dimensions. The electrical properties such as AC conductivity, dielectric constant and dielectric loss were measured at different temperatures in the different frequency range by involving the impedance analyser of all the prepared samples.

scholarly journals A Superhydrophobic, Antibacterial, and Durable Surface of Poplar Wood

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1885
Author(s):  
Xinyu Wu ◽  
Feng Yang ◽  
Jian Gan ◽  
Zhangqian Kong ◽  
Yan Wu
Keyword(s):  
Stearic Acid ◽  
Antibacterial Properties ◽  
Alkali Resistance ◽  
Poplar Wood ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Temperatures ◽  
Acid And Alkali Resistance ◽  
The Stability

The silver particles were grown in situ on the surface of wood by the silver mirror method and modified with stearic acid to acquire a surface with superhydrophobic and antibacterial properties. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray energy spectroscopy (XPS) were used to analyze the reaction mechanism of the modification process. Scanning electron microscopy (SEM) and contact angle tests were used to characterize the wettability and surface morphology. A coating with a micro rough structure was successfully constructed by the modification of stearic acid, which imparted superhydrophobicity and antibacterial activity to poplar wood. The stability tests were performed to discuss the stability of its hydrophobic performance. The results showed that it has good mechanical properties, acid and alkali resistance, and UV stability. The durability tests demonstrated that the coating has the function of water resistance and fouling resistance and can maintain the stability of its hydrophobic properties under different temperatures of heat treatment.

Study of the multiplet nature in shpol'skii effect: Host n-heptane crystalline structure by X-ray diffraction and guest coronene position by ESR

1977 ◽  
Vol 22 (2) ◽  
pp. 207-214 ◽  
Author(s):  
A.M. Merle ◽  
M. Lamotte ◽  
S. Risemberg ◽  
C. Hauw ◽  
J. Gaultier ◽  
...  
Keyword(s):  
Crystalline Structure ◽  
X Ray Diffraction ◽  
X Ray

scholarly journals Hydrothermal Ageing and Its Effect on Fracture Load of Zirconia Dental Implants

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3103
Author(s):  
Laurent Gremillard ◽  
Agnès Mattlet ◽  
Alexandre Mathevon ◽  
Damien Fabrègue ◽  
Bruno Zberg ◽  
...  
Keyword(s):  
Dental Implants ◽  
Fracture Load ◽  
Accelerated Ageing ◽  
Dental Ceramics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dental Restorations ◽  
Different Temperatures ◽  
Mechanical Performances ◽  
Kinetics Of

Due to growing demand for metal-free dental restorations, dental ceramics, especially dental zirconia, represent an increasing share of the dental implants market. They may offer mechanical performances of the same range as titanium ones. However, their use is still restricted by a lack of confidence in their durability and, in particular, in their ability to resist hydrothermal ageing. In the present study, the ageing kinetics of commercial zirconia dental implants are characterized by X-ray diffraction after accelerated ageing in an autoclave at different temperatures, enabling their extrapolation to body temperature. Measurements of the fracture loads show no effect of hydrothermal ageing even after ageing treatments simulated a 90-year implantation.

scholarly journals Modeling of magneto-conductivity of bismuth selenide: a topological insulator

2021 ◽  
Vol 3 (4) ◽  
Author(s):  
Yogesh Kumar ◽  
Rabia Sultana ◽  
Prince Sharma ◽  
V. P. S. Awana
Keyword(s):  
Magnetic Field ◽  
Magnetic Fields ◽  
Single Crystal ◽  
Single Crystals ◽  
X Ray Diffraction ◽  
Field Range ◽  
X Ray ◽  
Bulk Carriers ◽  
Different Temperatures

AbstractWe report the magneto-conductivity analysis of Bi2Se3 single crystal at different temperatures in a magnetic field range of ± 14 T. The single crystals are grown by the self-flux method and characterized through X-ray diffraction, Scanning Electron Microscopy, and Raman Spectroscopy. The single crystals show magnetoresistance (MR%) of around 380% at a magnetic field of 14 T and a temperature of 5 K. The Hikami–Larkin–Nagaoka (HLN) equation has been used to fit the magneto-conductivity (MC) data. However, the HLN fitted curve deviates at higher magnetic fields above 1 T, suggesting that the role of surface-driven conductivity suppresses with an increasing magnetic field. This article proposes a speculative model comprising of surface-driven HLN and added quantum diffusive and bulk carriers-driven classical terms. The model successfully explains the MC of the Bi2Se3 single crystal at various temperatures (5–200 K) and applied magnetic fields (up to 14 T).

Cetyltrimethylammonium bromide- and ethylene glycol-assisted preparation of mono-dispersed indium oxide nanoparticles using hydrothermal method

2014 ◽  
Vol 68 (8) ◽  
Author(s):  
Selvakumar Dhanasingh ◽  
Dharmaraj Nallasamy ◽  
Saravanan Padmanapan ◽  
Vinod Padaki
Keyword(s):  
Ethylene Glycol ◽  
Hydrothermal Method ◽  
Indium Oxide ◽  
Cetyltrimethylammonium Bromide ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
X Ray ◽  
Transmission Electron ◽  
Diffraction Patterns

AbstractThe influence of cetyltrimethylammonium bromide and ethylene glycol on the size and dispersion of indium oxide nanoparticles prepared under hydrothermal conditions was investigated. The precursor compound, indium hydroxide, obtained by the hydrothermal method in the absence as well as the presence of cetyltrimethylammonium bromide, was converted to indium oxide by sintering at 400°C. The formation of nanoscale indium oxide upon sintering was ascertained by the characteristic infrared adsorption bands and X-ray diffraction patterns of indium oxide. Transmission electron microscopy and band gap values confirmed that the cetyltrimethylammonium bromide facilitated the formation of indium oxide nanoparticles smaller in size and narrower in distribution than those prepared without the assistance of cetyltrimethylammonium bromide.

2D X-ray diffraction and molecular modelling of the crystalline structure of polyesters under uniaxial stress

2021 ◽  
pp. 096739112199822
Author(s):  
Ahmed I Abou-Kandil ◽  
Gerhard Goldbeck
Keyword(s):  
Crystalline Structure ◽  
Molecular Modelling ◽  
Three Dimensional ◽  
Uniaxial Stress ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wide Range ◽  
Modelling Techniques ◽  
Diffraction Patterns

Studying the crystalline structure of uniaxially and biaxially drawn polyesters is of great importance due to their wide range of applications. In this study, we shed some light on the behaviour of PET and PEN under uniaxial stress using experimental and molecular modelling techniques. Comparing experiment with modelling provides insights into polymer crystallisation with extended chains. Experimental x-ray diffraction patterns are reproduced by means of models of chains sliding along the c-axis leading to some loss of three-dimensional order, i.e. moving away from the condition of perfect register of the fully extended chains in triclinic crystals of both PET and PEN. This will help us understand the mechanism of polymer crystallisation under uniaxial stress and the appearance of mesophases in some cases as discussed herein.

Sign in / Sign up

Export Citation Format

Share Document