The influence of breed, gender, and PSS (Halothane) genotype on meat quality, cooking loss, and palatability of pork

ObjectivesLimited research has investigated the effects of plant-based additives fed to feedlot cattle beyond cattle growth performance and carcass characteristics. Thus, the objective of this study was to investigate the effects of feeding antibiotic supplements versus essential oils and/or benzoic acid to finishing cattle on meat quality and sensory attributes of the longissimus thoracis (LT) muscle.Materials and MethodsCrossbred steers (N = 63) were placed into 3 blocks based on initial weight. Within each block, 1 of 5 treatments were randomly applied using an Insentec feeding system for 98 d: (1) control (CON) diet (no supplement); (2) monensin/tylosin (M/T) diet (monensin supplemented at 33 mg/kg on dry matter (DM) basis; tylosin supplemented at 11 mg/kg on DM basis); (3) essential oils (EO) diet (supplemented at 1.0 g/steer/day); (4) benzoic acid (BA) diet (supplemented at 0.5% on DM basis); and (5) combination (COMBO) diet (essential oils supplemented at 1.0 g/steer/day and benzoic acid supplemented at 0.5% on DM basis). Beef rib (IMPS#107) sections from the right side of carcasses were collected from a commercial processing facility and transported to the U of Guelph meat science laboratory and processed into 2.54 cm LT steaks. pH and objective color were collected for the LT steaks at 6 d post-mortem. Samples for cooking loss and shear force were aged for 7 d and 14 d post-mortem. Samples for sensory were aged for 7 d post-mortem. Duplicate 5 to 6 g homogeneously blended LT samples were analyzed for moisture content by forced-air convection oven drying at 100°C for 24 h (Method 950.46, AOAC. Lipid content of the dried samples were determined by Soxhlet extraction with petroleum ether, followed by 24 h of oven drying at 100°C. Cooking loss was measured after cooking samples to an internal temperature of 72°C. Warner-Bratzler shear force (WBSF) was measured on 1.3 cm diameter cores that were cut parallel to muscle fibers. Meat quality results were analyzed as a randomized complete block design (RCBD) with fixed effects of treatment, block and their interaction using PROC GLIMMIX of SAS. For sensory analysis, 8 highly trained panelists evaluated the tenderness, juiciness, chewiness, beef flavor intensity, and off-flavor intensity of steaks using a 15-cm line scale. Each steak was cooked to 68°C and served to each panelist as two 1-cm cubes. Results were analyzed as a RCBD with the fixed effects of treatment, panelist, and their interaction and the random effect of session.ResultsThere were no significant differences (P > 0.07) among treatments in this study for pH, objective color, % moisture, WBSF, or cooking loss of LT samples. Ribeye from the CON diet had significantly less % crude fat (P = 0.05) compared to other treatments. There was an effect of diet on the tenderness, chewiness, juiciness and beef flavor intensity of steaks as determined by the panelist. Specifically, CON and COMBO steaks were tougher, chewier and less juicy. All steaks had strong beef flavor, especially the BA steaks. Off-flavors were barely detectable.ConclusionResults showed that EO and BA when fed to finishing cattle do not affect meat quality. Trained panelists reported steaks in the M/T, EO, and BA diet were tender, juicier, and had stronger beef flavors. Potential off-flavors and off-aromas in finishing feed did not translate to beef products.

Download Full-text

Reproducibility and correlation between meat shear force measurements by Warner-Bratzler machine and a texturometer

International Journal of Food Studies ◽

10.7455/ijfs.v5i2.348 ◽

2016 ◽

Vol 5 (2) ◽

Author(s):

Lucas Arantes-Pereira ◽

Flávia C. Vargas ◽

Júlio C.C. Balieiro ◽

Ana Monica Q.B. Bittante ◽

Paulo J.A. Sobral

Keyword(s):

Meat Quality ◽

Proximate Composition ◽

Shear Force ◽

Biceps Femoris ◽

Cooking Loss ◽

Force Measurements ◽

Regression Curves ◽

Sensory Characteristic ◽

Psoas Major ◽

Tensor Fasciae Latae

Tenderness has a prominent position on meat quality and is considered to be the sensory characteristic that most influences meat acceptance. Therefore, the aim of this study was to evaluate the accuracy and determine correlations among three different meat shear force techniques. Commercial samples of bovine Longissimus thoracis et lumborum (BLTL), Tensor fasciae latae (BTFL), Semitendinosus (BST), Psoas major (BPM), Biceps femoris (BBF) and swine Longissimus thoracis et lumborum (PLTL) were analyzed for pH, proximate composition, cooking loss and shear force with a classical Warner-Bratzler device and a TA-XT2 Texturometer equipped with shear blades 1 and 3 mm thick. The effect of different techniques in each studied muscle was statistically analyzed and regression curves were built. Results from the 1 mm blade were quite similar to the ones obtained with the Warner-Bratzler, however the results from 3 mm blade were overestimated (p<0.05). Significant correlation (p<0.01) among shear force technique using Warner-Bratzler and the ones using the Texturometer was observed (0.47 for 1 mm blade and 0.57 for the 3 mm blade). In conclusion, we found that the 1 mm blade and the Warner-Bratzler machine are reproducible for all tested muscles, while the 3 mm blade is not reproducible for the BTFL, BST, BPM, BBF, PLTL. There is a significant correlation between the results obtained by the classical Warner-Bratzler and the TA-XT2 Texturometer equipped with both blades. Therefore, TA-XT2 Texturometer equipped with the 1mm blade can perfectly replace the traditional Warner-Bratzler device.

Download Full-text

Carcass Traits and Meat Quality Characteristics of Malabari Male Kids Reared under Different Production System

Indian Journal of Animal Research ◽

10.18805/ijar.b-4192 ◽

2020 ◽

Author(s):

Chikkagoudara Kotresh Prasad ◽

John Abraham ◽

Balusami Chinnappan ◽

Roshin Anie Jose ◽

Senthil Murugan ◽

...

Keyword(s):

Body Weight ◽

Meat Quality ◽

Production System ◽

Carcass Traits ◽

Live Weight ◽

Quality Characteristics ◽

Cooking Loss ◽

Body Parts ◽

Final Body Weight ◽

The Impact

Background: The intensive rearing systems of goats needs dietary formulations that will meet animal requirements, mainly the protein and energy to allow optimum growth rate. Alternative systems to attain 15-20 kg body weight by three months of age with better meat quality is need of the hour. Broiler goat production system is most suitable system of rearing for meat goat production. The current study was conducted to examine the impact of broiler goat production system on the carcass traits and meat quality characteristics of Malabari male kids. Methods: Fourteen pre-weaned kids were randomly allotted to two treatments. Treatment-I (T1) kids were allowed to suckle thrice a day during four weeks and twice in a day during consequent weeks. Whereas in Treatment-II (T2), kids were reared intensively by providing finely ground concentrate feed mixed with equal quantity of rice gruel from a feeding bottle after 7 days of colostrum feeding from the mother. The animals were slaughtered at an age of three months and the final body weight, carcass traits like dressing percentage, weight of different body parts and meat quality parameters like pH, color, cooking loss and shear force were analysed. The proximate composition and sensory evaluation was performed. Result: Broiler goat production system could produce significantly (P less than 0.01) higher final average body weight compared to natural system. All the carcass traits were significantly (P less than 0.01) higher in T2. The broiler goat production system could double the net live weight during the same period compared to natural suckling system with higher dressing % and the chevon produced was tender with less cooking loss. Hence, this system can be recommended for chevon production in shorter period with higher dressing % and lesser cooking loss in Malabari male kids.

Download Full-text

83 Tenderness and cooking loss of beef loins

Journal of Animal Science ◽

10.1093/jas/skz053.060 ◽

2019 ◽

Vol 97 (Supplement_1) ◽

pp. 27-28 ◽

Cited By ~ 1

Author(s):

Robin G Coombs ◽

C R Richardon

Keyword(s):

Standard Deviation ◽

Meat Quality ◽

Shear Force ◽

Quality Attributes ◽

Grocery Store ◽

Cooking Loss ◽

Longissimus Muscle ◽

Internal Temperature ◽

Regional Area ◽

Resting Period

Abstract The focus of this study involved measuring two variables of meat quality: tenderness and cooking loss. Experiments were conducted on a premium cut of meat – the loin. The loin contains the Longissimus muscle, with pieces of the Iliocostalis and Spinalis dorsi muscles. The Longissimus muscle was cored for tenderness. Two sources of loins were evaluated: Akaushi breed, and from a commercial grocery store. Meat used consisted of Akaushi loins from 6 different animals (prime grade) and one select grade loin (control). The protocol involved dividing each loin into 6 (907-1134g) roasts, cooking at 104.40 C (to internal temperature of 73.90 C), measuring by weight the cooking loss of the roasts after a 30-minute resting period, and determining tenderness by Warner-Bratzler Shear Force (WBSF) (after overnight storage in a cooler). Cores were taken at 6 different locations of the roast, over the same regional area for WBSF determinations. The WBSF coring instrument used was provided. Tenderness of each loin was measured in 36 cores (n = 36). In overall tenderness, the control loin ranked third out of the seven loins and had the least amount of cooking loss. No differences were found in tenderness (P > 0.05). However, a difference was found in average cooking loss 181.44g ± 0.03 (control); 254.01g ± 0.03 (Akaushi) (P < 0.05). When observing tenderness consistency, the control loin had a somewhat larger standard deviation (1.38 vs 0.756) than the Akaushi loins.Loins used in this study showed variation in cooking loss, tenderness, and consistency between a commercial grocery store source and the Akaushi beef source. These data indicates that quality attributes of beef loins used in this study may be different in ways not related to grade.

Download Full-text

Physico-Chemical Characteristics and Microbiological Quality of Broiler Chicken Pectoralis Major Muscle Subjected to Different Storage Temperature and Duration

Foods ◽

10.3390/foods9060741 ◽

2020 ◽

Vol 9 (6) ◽

pp. 741

Author(s):

Muhamad Faris Ab Aziz ◽

Muhammad Nizam Hayat ◽

Ubedullah Kaka ◽

Nitty Hirawaty Kamarulzaman ◽

Awis Qurni Sazili

Keyword(s):

Meat Quality ◽

Broiler Chicken ◽

Storage Temperature ◽

Pectoralis Major Muscle ◽

Microbiological Quality ◽

Pectoralis Major ◽

Cooking Loss ◽

Storage Duration ◽

Physico Chemical

Storage temperature and duration plays an important role in meat processing. Observations in poultry processing plants have shown a serious deviation in storage condition compared to the recommended procedures. Furthermore, there is still a paucity of evidence on the effects of storage temperature and duration on meat quality and microbial population. The aim of this study was to determine the effects of different temperature and duration during storage on physico-chemical properties and microbiological quality of broiler chicken Pectoralis major muscle. Eighty birds were slaughtered and processed, following which the packed boneless breast (PBB) (each bird was to provide two breast muscle samples; left breast and right breast) was divided into four groups, each consisted of 40 PBB. Each group was subsequently assigned to storage either at 4 °C, −10 °C, −18 °C or −40 °C, for 24 h before 20 PBB samples from each group were transported to the respective laboratory for meat quality and microbiological analysis. The remaining 20 PBB from each storage temperature were stored for 72 h before being transported for analysis. Results have shown significant increases in drip loss and cooking loss as the storage temperature decreases. Similarly, storage duration significantly affected cooking loss, of which, samples stored for 72 h exhibited higher cooking loss compared to those stored for 24 h. For color, significant differences were only observed in lightness (L*) and redness (a*) values. Longer duration of storage had significantly improved tenderness whereby, samples that have been stored for a shorter duration presented higher pH values. Populations of coliform and Salmonella decreased significantly with decreasing temperature and increasing storage duration.

Download Full-text

Effect of Ultimate pH on Postmortem Myofibrillar Protein Degradation and Meat Quality Characteristics of Chinese Yellow Crossbreed Cattle

The Scientific World JOURNAL ◽

10.1155/2014/174253 ◽

2014 ◽

Vol 2014 ◽

pp. 1-8 ◽

Cited By ~ 11

Author(s):

Peng Li ◽

Tiantian Wang ◽

Yanwei Mao ◽

Yimin Zhang ◽

Lebao Niu ◽

...

Keyword(s):

Enzymatic Activity ◽

Protein Degradation ◽

Meat Quality ◽

Troponin T ◽

Quality Characteristics ◽

Myofibrillar Protein ◽

Cooking Loss ◽

Crossbred Cattle ◽

Beef Tenderness ◽

Fragmentation Index

This paper describes the complex effects of postmortem ultimate pH (pHu) on Chinese Yellow crossbreed cattle quality during postmortem ageing and provides an explanation of how pHu affects beef tenderness. High pHu beef had the highest initial tenderness (P<0.05) compared with other groups at 1 day postmortem. Intermediate and low pHu beef had similar initial WBSF at 1 day postmortem, but intermediate pHu beef had slower tenderization rate than low pHu beef (P<0.05). Purge loss, cooking loss,L*,a*, andb*values decreased with increasing pHu during ageing (P<0.05). Myofibril fragmentation index (MFI) was higher in high pHu beef than intermediate and low pHu beef throughout ageing (P<0.05). Protein degradation studies found that desmin and troponin-T appeared degraded within 0.5 h postmortem for high and low pHu beef, compared to >2 days for intermediate pHu beef. Overall, Chinese Yellow crossbred cattle tenderness is related to pHu, which may be affected by proteolytic enzymatic activity. Therefore, pHu may be used to predict beef tenderness and other quality characteristics during postmortem ageing. To achieve consistent tenderness, different ageing times should be used, depending on pHu.

Download Full-text

A non-synonymous single nucleotide polymorphism in the paraoxonase 3 gene regulates meat quality in Berkshire pigs

Animal Production Science ◽

10.1071/an16573 ◽

2018 ◽

Vol 58 (11) ◽

pp. 1990 ◽

Cited By ~ 1

Author(s):

Jeong-Wan Hur ◽

Jung Hye Hwang ◽

Seul Gi Kwon ◽

Da Hye Park ◽

Tae Wan Kim ◽

...

Keyword(s):

Single Nucleotide Polymorphism ◽

Meat Quality ◽

Cooking Loss ◽

Quality Traits ◽

Post Mortem ◽

Nucleotide Polymorphism ◽

Single Nucleotide ◽

Meat Quality Traits ◽

Berkshire Pigs

The paraoxonase (Pon) gene family contains three members: Pon1, Pon2, and Pon3. Pon3 modulates superoxide production and prevents apoptosis. The role of Pon3 has not been fully elucidated in the pig. This study is the first to investigate the association between Pon3 and meat quality in the Berkshire pig. We identified a single nucleotide polymorphism in the Pon3 gene (c.227A > G) that resulted in a change in histidine to arginine at position 76. To elucidate the role of this non-synonymous single nucleotide polymorphism in the Pon3 gene, we analysed the Pon3 genotype and meat quality traits in 434 Berkshire pigs. The results of a codominant model show that carcass weight, meat colour (lightness), cooking loss, and the Warner–Bratzler shear force were significantly associated with the Pon3 genotype. Furthermore, the 24-h post-mortem pH had the strongest relationship with the Pon3 genotype. The G allele decreased cooking loss and fat content, whereas the A allele increased the 24-h post-mortem pH and decreased backfat thickness, which contribute to meat storage life and M. longissimus dorsi depth respectively. In conclusion, the non-synonymous single nucleotide polymorphism in the Pon3 gene showed a close correlation with meat quality traits in the Berkshire pig.

Download Full-text

Effects of crossbred ewe genotype and ram genotype on lamb meat quality from the lowland sheep flock

The Journal of Agricultural Science ◽

10.1017/s002185960200237x ◽

2002 ◽

Vol 139 (2) ◽

pp. 195-204 ◽

Cited By ~ 17

Author(s):

L. E. R. DAWSON ◽

A. F. CARSON ◽

B. W. MOSS

Keyword(s):

Meat Quality ◽

Shear Force ◽

Live Weight ◽

Growth Index ◽

Gluteus Medius ◽

Quality Parameters ◽

Cooking Loss ◽

Lamb Meat ◽

Hue Angle ◽

The Relationship

A study was carried out on five lowland farms in Northern Ireland over 2 years to investigate the effects of crossbred ewe and ram genotype on lamb meat quality. Four ewe genotypes were sourced from six hill farms – Bluefaced Leicester×Blackface (BLXB), Texel×Blackface (TXB), Suffolk×Cheviot (SXCH) and Texel×Cheviot (TXCH). On each farm groups of 20–30 of each crossbred ewe genotype were crossed with Suffolk or Texel sires. Within each of the ram breeds, high lean growth index rams sourced from UK sire reference schemes (SRS) were compared with rams sourced from flocks not involved in objective genetic improvement programmes (control). Throughout the 2 years of the study the ewes lambed at 1 and 2 years of age. Lambs from each of the crosses were slaughtered at 36, 44 and 52 kg live weight. Meat from lambs slaughtered at 36 kg had lower a* values (15.1) than meat from lambs slaughtered at 52 kg (17.0 S.E. 0.47) (P<0.05). Ewe genotype had no effect on any parameter of meat quality measured. The carcasses of lambs sired by Suffolk rams had a higher pHU than lambs sired by Texel rams (5.70 v. 5.65; S.E. 0.014; P<0.05) and hue angle was lower (P<0.05) in Suffolk-sired lambs (32.9°) compared with Texel-sired lambs (35.1°) (S.E. 0.62°). Warner–Bratzler shear force was lower in SRS-sired lambs (2.05 kg/cm2) compared with control-sired lambs (2.36 (S.E. 0.096) kg/cm2; P<0.05). Carcasses from male lambs had a greater cooking loss (217 g/kg) than from female lambs (196 S.E. 5.7 g/kg) (P<0.01) and meat from male lambs had greater values for Warner–Bratzler shear force (2.44 kg/cm2) than from female lambs (1.97 S.E. 0.098 kg/cm2) (P<0.001). Low, but statistically significant (P<0.05) correlations were obtained between carcass fat measurements and meat quality parameters (r = −0.29 for the relationship between cooking loss and fat depth over the gluteus mediusP<0.001); r = 0.21 for the relationship between fat classification and C* values P<0.01). When meat quality parameters for each of the fat classes were averaged, significant linear regressions (P<0.05) were obtained between fat classification and pHU, a* and C* values.

Download Full-text

Breast meat quality of chickens with divergent growth rates and its relation to growth curve parameters

Archives Animal Breeding ◽

10.5194/aab-60-427-2017 ◽

2017 ◽

Vol 60 (4) ◽

pp. 427-437 ◽

Cited By ~ 5

Author(s):

Philipp C. Muth ◽

Anne Valle Zárate

Keyword(s):

Growth Rate ◽

Body Weight ◽

Meat Quality ◽

Growth Curve ◽

Growth Rates ◽

Cooking Loss ◽

Growth Potential ◽

Breast Meat ◽

Fast Growing ◽

Slow Growing

Abstract. The effects of the increase of body weight of contemporary broilers during growth on functional meat quality and color characteristics of the chicken breast muscle are controversially debated. Therefore, male chickens (n = 264) of a fast-growing commercial broiler (Ross 308) and two slow-growing experimental meat-type chicken lines were compared at equal age and at similar body weight in order to investigate the effect of growth rate on selected functional breast meat traits and meat color. Additionally, the breast meat characteristics of birds with different growth profiles were compared within lines. When the body weight of commercial broilers reached about 40 to 60 % of their growth potential, they exhibited particularly high ultimate pH values compared with slow-growing lines. The ability of the meat of fast-growing broilers to retain water during cooking was impaired (5 to 16 percentage points increased cooking loss compared to slow-growing lines), which, in contrast to pH, was only marginally affected by body weight and/or age at slaughter. No unfavorable correlations of breast meat quality traits with the growth profile, represented by growth curve parameters derived from the Gompertz–Laird equation, were detected within any of the investigated chicken lines. It is noteworthy that the associations of ultimate pH and cooking loss with maximum growth speed indicate a non-linear relationship. Thus, some of the functional characteristics of breast meat of the fast-growing broiler resembled the white-striping defect described for poultry meat, but the hypothesis that selection on increased growth rates is detrimental for meat quality per se could not be confirmed. In fact, an elevated growth potential in particular, i.e., body weight at maturity, could have some beneficial effects for the water-holding capacity of breast meat, regardless of the genotypic growth rate.

Download Full-text

Hierarchical clustering as a tool to develop a classification scheme for rabbit meat quality

World Rabbit Science ◽

10.4995/wrs.2021.14368 ◽

2021 ◽

Vol 29 (3) ◽

pp. 129

Author(s):

A. -S. Larivière-Lajoie ◽

Dancy Cinq-Mars ◽

Frederic Guay ◽

Simon Binggeli ◽

Antoni Dalmau ◽

...

Keyword(s):

Meat Quality ◽

Value Chain ◽

Lactate Concentration ◽

Blood Lactate Concentration ◽

Hierarchical Cluster ◽

Biceps Femoris ◽

Cooking Loss ◽

Time Class ◽

Rabbit Meat

This study aimed to characterise the quality of meat from commercially-raised rabbits. Animals came from five different producers and were laughtered in three different plants under provincial or federal inspection jurisdiction. Animal behaviour evaluated by scan sampling prior to feed withdrawal (FW) and transport, as well as blood lactate concentration at exsanguination, did not raise concerns with respect to stress. Stomach pH was higher (P=0.047) when the FW time was short (≤13.5 h), at a mean value of 2.23. All pH values measured 1 h post-mortem from the Biceps femoris (BF) and almost all (97.6%) from the Longissimus lumborum (LL) were higher than 6. Values for ultimate pH measured 24 h postmortem(pHu) ranged from 5.80 to 6.83 and from 5.70 to 6.70 for BF and LL muscles, respectively. The maximum meat drip loss recorded was 2.6%, while cooking loss reached 30%. Meat lightness (L*) and colour intensity (C*) for the long FW times (≥23 h) were no different from those with short and intermediate (15.5 to 17.3 h) FW times. However, these colour parameters were higher for the short FW time class compared to the intermediate FW time class (P<0.02). A hierarchical cluster analysis based on pHu, cooking loss and lightness (L*) from 200 rabbit loins was performed. Of the four clusters created, clusters 1 and 2 had the best and second-best meat quality, respectively. Clusters 3 and 4 had the lowest meat quality and presented DFD-like (dark, firm and dry) characteristics. Meat did not exhibit PSE-like (pale, soft, exudative) characteristics, even for the slaughter lot with the minimum mean pHu. Of the eight slaughter lots evaluated, more than 50% of the meat from three of them fell into clusters 3 and 4; all three were in the intermediate FW time class. Overall, the quality of rabbit meat analysed was acceptable for commercial use, but rather variable. This suggests that there are factors within the value chain that are not yet fully controlled and require further investigation.

Download Full-text