Development of low-cost image mosaics of hard-bottom sessile communities using SCUBA: comparisons of optical media and of proxy measures of community structure

2011 ◽  
Vol 92 (1) ◽  
pp. 49-62 ◽  
Author(s):  
H. van Rein ◽  
D.S. Schoeman ◽  
C.J. Brown ◽  
R. Quinn ◽  
J. Breen
Keyword(s):  
Data Collection ◽  
Low Cost ◽  
Cost Effective ◽  
Image Resolution ◽  
Extraction Technique ◽  
Hard Substratum ◽  
Image Mosaicing ◽  
Reef Community ◽  
Community Monitoring ◽  
Sampling Procedures

Underwater image-based sampling procedures, using SCUBA, are compared using imagery collected from a temperate hard-substratum community. The effectiveness of a low-budget, high-resolution image mosaicing technique is assessed by comparing the relative efficiency of data collection, extraction and analysis among sampling procedures. In addition, a manipulative experiment tested whether the sampling procedures could detect the physical removal of 10% of the reef community. Overall, four factors were explored within the data: data collection media (stills and video), cover and community composition estimation techniques (visual cover estimation, frequency of occurrence and point extraction), change detection (pre- and post-impact) and depth (8, 14, 18 and 22 m). Stills imagery sampled the reef community at a higher image resolution than the video imagery, which enabled identification of more species and less-conspicuous benthic categories. Using the visual cover estimation technique, the stills imagery also had the greatest benefit in terms of efficiency and species identification. However, the experimental impact was detected using only the point extraction technique. The recommendations are that: (1) the image mosaicing technique is applied to fixed-station monitoring; (2) the point extraction technique be used for efficient and cost-effective monitoring at coarse taxonomic resolutions; and (3) survey depths remain constant over the duration of hard-substratum community monitoring.

scholarly journals Data Collection Smart and Simple: Evaluation and Metanalysis of Call Data From Studies Applying the 5Q Approach

2021 ◽  
Vol 5 ◽  
Author(s):  
Anton Eitzinger
Keyword(s):  
Data Collection ◽  
Agricultural Development ◽  
Response Rate ◽  
Interactive Voice Response ◽  
Low Cost ◽  
Cost Effective ◽  
Lessons Learned ◽  
Completion Rate ◽  
Theory Of Change ◽  
Feedback Data

Agricultural development projects often struggle to show impact because they lack agile and cost-effective data collection tools and approaches. Due to the lack of real-time feedback data, they are not responsive to emerging opportunities during project implementation and often miss the needs of beneficiaries. This study evaluates the application of the 5Q approach (5Q). It shows findings from analyzing more than 37,000 call log records from studies among five countries. Results show that response rate and completion status for interactive voice response (IVR) surveys vary between countries, survey types, and survey topics. The complexity of question trees, the number of question blocks in a tree, and the total call duration are relevant parameters to improve response and survey completion rate. One of the main advantages of IVR surveys is low cost and time efficiency. The total cost for operating 1,000 calls of 5 min each in five countries was 1,600 USD. To take full advantage of 5Q, questions and question-logic trees must follow the principle of keeping surveys smart and simple and aligned to the project's theory of change and research questions. Lessons learned from operating the IVR surveys in five countries show that the response rate improves through quality control of the phone contact database, using a larger pool of phone numbers to reach the desired target response rate, and using project communication channels to announce the IVR surveys. Among other things, the respondent's first impression is decisive. Thus, the introduction and the consent request largely determine the response and completion rate.

Origin-Destination Data Collection Technology

2014 ◽  
pp. 1-16 ◽  
Author(s):  
Stacey G. Bricka ◽  
Richard “Trey” Baker ◽  
Christopher L. Simek ◽  
Nicholas Wood
Keyword(s):  
Data Collection ◽  
Emerging Technologies ◽  
Survey Methods ◽  
Low Cost ◽  
Cost Effective ◽  
Data Generation ◽  
Travel Survey ◽  
Recent Trends ◽  
Technological Improvements

Traditionally, the collection of origin-destination data through travel surveys has been a labor-intensive undertaking. Field researchers, armed with clipboards, stopped motorists as they traveled or visited residents in their homes to ask questions about the origins, destinations, purposes, and modes of travel. Technological improvements have led to more cost-effective survey methods that reduce the need to conduct intercept, in-person, and mail-based surveys. This chapter organizes and discusses recent trends in travel surveying based on whether they generate self-reported or observed travel data. The results suggest that these techniques are best used as a valuable supplement to traditional data generation methods or as a low cost alternative in situations where snapshots of travel activity will suffice. Future travel surveying efforts are likely to include a mix of traditional strategies and emerging technologies as the travel survey community continues to adapt to emerging technologies.

scholarly journals Sera Çevre Koşullarının Nesnelerin İnterneti Tabanlı İzleme ve Analiz Sistemi ile Denetlenmesi

2017 ◽  
Vol 5 (11) ◽  
pp. 1279 ◽  
Author(s):  
Ali Çaylı ◽  
Adil Akyüz ◽  
Abdullah Nafi Baytorun ◽  
Sedat Boyacı ◽  
Sait Üstün ◽  
...  
Keyword(s):  
Data Collection ◽  
Low Income ◽  
Rural Areas ◽  
Ieee 802.15.4 ◽  
Data Transfer ◽  
Low Cost ◽  
Cost Effective ◽  
Indoor Climate ◽  
Time Data ◽  
Data Collection And Analysis

Wireless sensor networks applications and inter-machine communication (M2M), called the Internet of Things, help decision-makers to control complex systems thanks to the low data-rate and cost-effective data collection and analysis. These technologies offer new possibilities to monitor environmental management and agricultural policies, and to improve agricultural production, especially in low-income rural areas. In this study, IoT is proposed with a low cost, flexible and scalable data collection and analysis system. For this purpose, open source hardware microprocessor cards and sensors are stored in the greenhouse computer database using the IEEE 802.15.4 Zigbee wireless communication protocol. The data can be analyzed by greenhouse computer analysis software, which is developed with the PHP programming language. It is possible to monitor the real time data from the greenhouse computer. Also alert rules definitions can be made and the system was tested in greenhouse conditions. It has been observed that it performs operations steadily such as data transfer, sensor measurements and data processing. The proposed system may be useful for monitoring indoor climate and controlling ventilation, irrigation and heating systems, especially for small enterprises due to the modular structure.

ASSESSMENT OF THE PLATELET COUNT IN THE PREGNANT WOMEN IN IGIMS, PATNA, BIHAR

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Tanwi Singh ◽  
Anshuman Sinha
Keyword(s):  
Platelet Count ◽  
Pregnant Women ◽  
Screening Test ◽  
Low Cost ◽  
Medical Science ◽  
Cost Effective ◽  
Platelet Indices ◽  
Increased Risk ◽  
Low Platelet Count ◽  
Severity Of The Disease

The major risk associated with low platelet count in pregnancy is the increased risk of bleeding during the childbirth or post that. There is an increased blood supply to the uterus during pregnancy and the surgical procedure requires cutting of major blood vessels. Women with thrombocytopenia are at increased risk of losing excessive blood. The risk is more in case of caesarean delivery as compared to vaginal delivery. Hence based on above findings the present study was planned for Assessment of the Platelet Count in the Pregnant Women in IGIMS, Patna, Bihar. The present study was planned in Department of Pathology, Indira Gandhi Institute of Medical Science, Patna, Bihar, India. The present study was planned from duration of January 2019 to June 2019. In the present study 200 pregnant females samples received for the platelet estimation were enrolled in the present study. Clinically platelet indices can be a useful screening test for early identification of preeclampsia and eclampsia. Also platelet indices can assess the prognosis of this disease in pregnant women and can be used as an effective prognostic marker because it correlates with severity of the disease. Platelet count is a simple, low cost, and rapid routine screening test. Hence the data generated from the present study concludes that platelet count can be used as a simple and cost effective tool to monitor the progression of preeclampsia, thereby preventing complications to develop during the gestational period. Keywords: Platelet Count, Pregnant Women, IGIMS, Patna, Bihar, etc.

Janus – A New Approach to Air Combat Pilot Training

2019 ◽  
Vol 2019 (4) ◽  
pp. 7-22
Author(s):  
Georges Bridel ◽  
Zdobyslaw Goraj ◽  
Lukasz Kiszkowiak ◽  
Jean-Georges Brévot ◽  
Jean-Pierre Devaux ◽  
...  
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Energy ◽  
Training System ◽  
Embedded Sensors ◽  
Pilot Training ◽  
New Approach ◽  
Combat Aircraft ◽  
Air Combat ◽  
The Cost

Abstract Advanced jet training still relies on old concepts and solutions that are no longer efficient when considering the current and forthcoming changes in air combat. The cost of those old solutions to develop and maintain combat pilot skills are important, adding even more constraints to the training limitations. The requirement of having a trainer aircraft able to perform also light combat aircraft operational mission is adding unnecessary complexity and cost without any real operational advantages to air combat mission training. Thanks to emerging technologies, the JANUS project will study the feasibility of a brand-new concept of agile manoeuvrable training aircraft and an integrated training system, able to provide a live, virtual and constructive environment. The JANUS concept is based on a lightweight, low-cost, high energy aircraft associated to a ground based Integrated Training System providing simulated and emulated signals, simulated and real opponents, combined with real-time feedback on pilot’s physiological characteristics: traditionally embedded sensors are replaced with emulated signals, simulated opponents are proposed to the pilot, enabling out of sight engagement. JANUS is also providing new cost effective and more realistic solutions for “Red air aircraft” missions, organised in so-called “Aggressor Squadrons”.

Low-Cost Hardware Implementation of Human Blood Identification Device Using Feed-Forward Artificial Neural Network on FPGA

2018 ◽  
Author(s):  
Rizki Eka Putri ◽  
Denny Darlis
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Low Cost ◽  
Image Resolution ◽  
Blood Type ◽  
Feed Forward ◽  
Testing Facility ◽  
System Input ◽  
Artificial Neural ◽  
Short Time

This article was under review for ICELTICS 2018 -- In the medical world there is still service dissatisfaction caused by lack of blood type testing facility. If the number of tested blood arise, a lot of problems will occur so that electronic devices are needed to determine the blood type accurately and in short time. In this research we implemented an Artificial Neural Network on Xilinx Spartan 3S1000 Field Programable Gate Array using XSA-3S Board to identify the blood type. This research uses blood sample image as system input. VHSIC Hardware Discription Language is the language to describe the algorithm. The algorithm used is feed-forward propagation of backpropagation neural network. There are 3 layers used in design, they are input, hidden1, and output. At hidden1layer has two neurons. In this study the accuracy of detection obtained are 92%, 92%, 92%, 90% and 86% for 32x32, 48x48, 64x64, 80x80, and 96x96 pixel blood image resolution, respectively.

Motivating Compliance: Firm Response to Mandatory Disclosure Policies

2018 ◽  
Vol 32 (2) ◽  
pp. 103-119
Author(s):  
Colleen M. Boland ◽  
Chris E. Hogan ◽  
Marilyn F. Johnson
Keyword(s):  
Conflict Of Interest ◽  
Low Cost ◽  
Cost Effective ◽  
Data Availability ◽  
Policy Adoption ◽  
Future Research ◽  
Regulated Firms ◽  
Firm Response ◽  
Disclosure Rules ◽  
The Impact

SYNOPSIS Mandatory existence disclosure rules require an organization to disclose a policy's existence, but not its content. We examine policy adoption frequencies in the year immediately after the IRS required mandatory existence disclosure by nonprofits of various governance policies. We also examine adoption frequencies in the year of the subsequent change from mandatory existence disclosure to a disclose-and-explain regime that required supplemental disclosures about the content and implementation of conflict of interest policies. Our results suggest that in areas where there is unclear regulatory authority, mandatory existence disclosure is an effective and low cost regulatory device for encouraging the adoption of policies desired by regulators, provided those policies are cost-effective for regulated firms to implement. In addition, we find that disclose-and-explain regulatory regimes provide stronger incentives for policy adoption than do mandatory existence disclosure regimes and also discourage “check the box” behavior. Future research should examine the impact of mandatory existence disclosure rules in the year that the regulation is implemented. Data Availability: Data are available from sources cited in the text.

Azo (Hydrazone) pigments: general principles

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Robert Christie
Keyword(s):  
High Performance ◽  
Metal Salt ◽  
Low Cost ◽  
Cost Effective ◽  
Precipitation Process ◽  
Ambient Temperatures ◽  
Technical Performance ◽  
Chemical Structures ◽  
General Chemical ◽  
Physical Form

Abstract This paper presents an overview of the general chemical principles underlying the structures, synthesis and technical performance of azo pigments, the dominant chemical class of industrial organic pigments in the yellow, orange, and red shade areas, both numerically and in terms of tonnage manufactured. A description of the most significant historical features in this group of pigments is provided, starting from the discovery of the chemistry on which azo colorants are based by Griess in the mid-nineteenth century, through the commercial introduction of the most important classical azo pigments in the early twentieth century, including products known as the Hansa Yellows, β-naphthol reds, including metal salt pigments, and the diarylide yellows and oranges, to the development in the 1950s and 1960s of two classes of azo pigments that exhibit high performance, disazo condensation pigments and benzimidazolone-based azo pigments. A feature that complicates the description of the chemical structures of azo pigments is that they exist in the solid state as the ketohydrazone rather than the hydroxyazo form, in which they have been traditionally been illustrated. Numerous structural studies conducted over the years on an extensive range of azo pigments have demonstrated this feature. In this text, they are referred to throughout as azo (hydrazone) pigments. Since a common synthetic procedure is used in the manufacture of virtually all azo (hydrazone) pigments, this is discussed in some detail, including practical aspects. The procedure brings together two organic components as the fundamental starting materials, a diazo component and a coupling component. An important reason for the dominance of azo (hydrazone) pigments is that they are highly cost-effective. The syntheses generally involve low cost, commodity organic starting materials and are carried out in water as the reaction solvent, which offers obvious economic and environmental advantages. The versatility of the approach means that an immense number of products may be prepared, so that they have been adapted structurally to meet the requirements of many applications. On an industrial scale, the processes are straightforward, making use of simple, multi-purpose chemical plant. Azo pigments may be produced in virtually quantitative yields and the processes are carried out at or below ambient temperatures, thus presenting low energy requirements. Finally, provided that careful control of the reaction conditions is maintained, azo pigments may be prepared directly by an aqueous precipitation process that can optimise physical form, with control of particle size distribution, crystalline structure, and surface character. The applications of azo pigments are outlined, with more detail reserved for subsequent papers on individual products.

scholarly journals Chemical Modification of Combusted Coal Gangue for U(VI) Adsorption: Towards a Waste Control by Waste Strategy

2021 ◽  
Vol 13 (15) ◽  
pp. 8421
Author(s):  
Yuan Gao ◽  
Jiandong Huang ◽  
Meng Li ◽  
Zhongran Dai ◽  
Rongli Jiang ◽  
...  
Keyword(s):  
Structural Analysis ◽  
High Efficiency ◽  
Low Cost ◽  
Chemical Activation ◽  
Cost Effective ◽  
Coal Gangue ◽  
Order Kinetic ◽  
Practical Applications ◽  
Detailed Structural Analysis ◽  
Alkaline Conditions

Uranium mining waste causes serious radiation-related health and environmental problems. This has encouraged efforts toward U(VI) removal with low cost and high efficiency. Typical uranium adsorbents, such as polymers, geopolymers, zeolites, and MOFs, and their associated high costs limit their practical applications. In this regard, this work found that the natural combusted coal gangue (CCG) could be a potential precursor of cheap sorbents to eliminate U(VI). The removal efficiency was modulated by chemical activation under acid and alkaline conditions, obtaining HCG (CCG activated with HCl) and KCG (CCG activated with KOH), respectively. The detailed structural analysis uncovered that those natural mineral substances, including quartz and kaolinite, were the main components in CCG and HCG. One of the key findings was that kalsilite formed in KCG under a mild synthetic condition can conspicuous enhance the affinity towards U(VI). The best equilibrium adsorption capacity with KCG was observed to be 140 mg/g under pH 6 within 120 min, following a pseudo-second-order kinetic model. To understand the improved adsorption performance, an adsorption mechanism was proposed by evaluating the pH of uranyl solutions, adsorbent dosage, as well as contact time. Combining with the structural analysis, this revealed that the uranyl adsorption process was mainly governed by chemisorption. This study gave rise to a utilization approach for CCG to obtain cost-effective adsorbents and paved a novel way towards eliminating uranium by a waste control by waste strategy.

Sign in / Sign up

Export Citation Format

Share Document