Impact of New GPS Signals on Positioning Accuracy for Urban Bus Operations

2020 ◽  
Vol 73 (6) ◽  
pp. 1284-1305
Author(s):  
Mireille Elhajj ◽  
Washington Ochieng
Keyword(s):  
Carrier Phase ◽  
Signal To Noise Ratio ◽  
Three Dimensional ◽  
Dimensional Accuracy ◽  
Single Frequency ◽  
Measurement Unit ◽  
Dual Frequency ◽  
Positioning Accuracy ◽  
Phase Measurements ◽  
The Impact

This paper analyses for the first time the impact of new GPS signals on positioning accuracy for dynamic urban applications, taking bus operations as an example. The performance assessment addresses both code measurement precision and positioning accuracy. The former is based on signal-to-noise ratio and estimation of multipath and noise by a combination of code and carrier phase measurements. The impact on positioning accuracy is derived by comparing the performance achievable with the conventional single frequency GPS only positioning both relative to reference trajectories from the integration of carrier phase measurements with data from a high grade inertial measurement unit. The results show that L5 code measurements have the highest precision, followed by L1 C/A and L2C. In the positioning domain, there is a significant improvement in two-dimensional and three-dimensional accuracy from dual frequency code measurements over the single frequency measurements, of 39% and 48% respectively, enabling more bus operation services to be supported.

scholarly journals Characterization of Carrier Phase-Based Positioning in Real-World Jamming Conditions

2021 ◽  
Vol 13 (14) ◽  
pp. 2680
Author(s):  
Søren Skaarup Larsen ◽  
Anna B. O. Jensen ◽  
Daniel H. Olesen
Keyword(s):  
Real World ◽  
Carrier Phase ◽  
Reference Station ◽  
Baseline Length ◽  
Dual Frequency ◽  
Positioning Accuracy ◽  
The Impact ◽  
Single Versus ◽  
Selection Of

GNSS signals arriving at receivers at the surface of the Earth are weak and easily susceptible to interference and jamming. In this paper, the impact of jamming on the reference station in carrier phase-based relative baseline solutions is examined. Several scenarios are investigated in order to assess the robustness of carrier phase-based positioning towards jamming. Among others, these scenarios include a varying baseline length, the use of single- versus dual-frequency observations, and the inclusion of the Galileo and GLONASS constellations to a GPS only solution. The investigations are based on observations recorded at physical reference stations in the Danish TAPAS network during actual jamming incidents, in order to realistically evaluate the impact of real-world jamming on carrier phase-based positioning accuracy. The analyses performed show that, while there are benefits of using observations from several frequencies and constellations in positioning solutions, special care must be taken in solution processing. The selection of which GNSS constellations and observations to include, as well as when they are included, is essential, as blindly adding more jamming-affected observations may lead to worse positioning accuracy.

scholarly journals Improving DGNSS Performance through the Use of Network RTK Corrections

2021 ◽  
Vol 13 (9) ◽  
pp. 1621
Author(s):  
Duojie Weng ◽  
Shengyue Ji ◽  
Yangwei Lu ◽  
Wu Chen ◽  
Zhihua Li
Keyword(s):  
Carrier Phase ◽  
Local Area ◽  
Satellite System ◽  
High Accuracy ◽  
Single Frequency ◽  
Baseline Length ◽  
Low Latitude ◽  
Phase Measurements ◽  
Network Rtk ◽  
Global Navigation Satellite

The differential global navigation satellite system (DGNSS) is an enhancement system that is widely used to improve the accuracy of single-frequency receivers. However, distance-dependent errors are not considered in conventional DGNSS, and DGNSS accuracy decreases when baseline length increases. In network real-time kinematic (RTK) positioning, distance-dependent errors are accurately modelled to enable ambiguity resolution on the user side, and standard Radio Technical Commission for Maritime Services (RTCM) formats have also been developed to describe the spatial characteristics of distance-dependent errors. However, the network RTK service was mainly developed for carrier-phase measurements on professional user receivers. The purpose of this study was to modify the local-area DGNSS through the use of network RTK corrections. Distance-dependent errors can be reduced, and accuracy for a longer baseline length can be improved. The results in the low-latitude areas showed that the accuracy of the modified DGNSS could be improved by more than 50% for a 17.9 km baseline during solar active years. The method in this paper extends the use of available network RTK corrections with high accuracy to normal local-area DGNSS applications.

scholarly journals The Effect of BDS-3 Time Group Delay and Differential Code Bias Corrections on Positioning

2020 ◽  
Vol 11 (1) ◽  
pp. 104
Author(s):  
Peipei Dai ◽  
Jianping Xing ◽  
Yulong Ge ◽  
Xuhai Yang ◽  
Weijin Qin ◽  
...  
Keyword(s):  
Group Delay ◽  
Assessment System ◽  
Convergence Time ◽  
Single Frequency ◽  
Positioning Accuracy ◽  
Differential Code Bias ◽  
Receiver Clock ◽  
Code Bias ◽  
Point Positioning ◽  
The Impact

The timing group delay parameter (TGD) or differential code bias parameter (DCB) is an important factor that affects the performance of GNSS basic services; therefore, TGD and DCB must be taken seriously. Moreover, the TGD parameter is modulated in the navigation message, taking into account the impact of TGD on the performance of the basic service. International GNSS Monitoring and Assessment System (iGMAS) provides the broadcast ephemeris with TGD parameter and the Chinese Academy of Science (CAS) provides DCB products. In this paper, the current available BDS-3 TGD and DCB parameters are firstly described in detail, and the relationship of TGD and DCB for BDS-3 is figured out. Then, correction models of BDS-3 TGD and DCB in standard point positioning (SPP) or precise point positioning (PPP) are given, which can be applied in various situations. For the effects of TGD and DCB in the SPP and PPP solution processes, all the signals from BDS-3 were researched, and the validity of TGD and DCB has been further verified. The experimental results show that the accuracy of B1I, B1C and B2a single-frequency SPP with TGD or DCB correction was improved by approximately 12–60%. TGD will not be considered for B3I single-frequency, because the broadcast satellite clock offset is based on the B3I as the reference signal. The positioning accuracy of B1I/B3I and B1C/B2a dual-frequency SPP showed that the improvement range for horizontal components is 60.2% to 74.4%, and the vertical components improved by about 50% after the modification of TGD and DCB. In addition, most of the uncorrected code biases are mostly absorbed into the receiver clock bias and other parameters for PPP, resulting in longer convergence time. The convergence time can be max increased by up to 50% when the DCB parameters are corrected. Consequently, the positioning accuracy can reach the centimeter level after convergence, but it is critical for PPP convergence time and receiver clock bias that the TGD and DCB correction be considered seriously.

scholarly journals Real-time GNSS precise point positioning for low-cost smart devices

GPS Solutions ◽  
2021 ◽  
Vol 25 (2) ◽  
Author(s):  
Liang Wang ◽  
Zishen Li ◽  
Ningbo Wang ◽  
Zhiyu Wang
Keyword(s):  
Carrier Phase ◽  
Measurement Errors ◽  
Precise Point Positioning ◽  
Low Cost ◽  
Smart Devices ◽  
Dual Frequency ◽  
Static Mode ◽  
Phase Measurements ◽  
Positioning Errors ◽  
Point Positioning

AbstractGlobal Navigation Satellite System raw measurements from Android smart devices make accurate positioning possible with advanced techniques, e.g., precise point positioning (PPP). To achieve the sub-meter-level positioning accuracy with low-cost smart devices, the PPP algorithm developed for geodetic receivers is adapted and an approach named Smart-PPP is proposed in this contribution. In Smart-PPP, the uncombined PPP model is applied for the unified processing of single- and dual-frequency measurements from tracked satellites. The receiver clock terms are parameterized independently for the code and carrier phase measurements of each tracking signal for handling the inconsistency between the code and carrier phases measured by smart devices. The ionospheric pseudo-observations are adopted to provide absolute constraints on the estimation of slant ionospheric delays and to strengthen the uncombined PPP model. A modified stochastic model is employed to weight code and carrier phase measurements by considering the high correlation between the measurement errors and the signal strengths for smart devices. Additionally, an application software based on the Android platform is developed for realizing Smart-PPP in smart devices. The positioning performance of Smart-PPP is validated in both static and kinematic cases. Results show that the positioning errors of Smart-PPP solutions can converge to below 1.0 m within a few minutes in static mode and the converged solutions can achieve an accuracy of about 0.2 m of root mean square (RMS) both for the east, north and up components. For the kinematic test, the RMS values of Smart-PPP positioning errors are 0.65, 0.54 and 1.09 m in the east, north and up components, respectively. Static and kinematic tests both show that the Smart-PPP solutions outperform the internal results provided by the experimental smart devices.

Single-Frequency Precise Point Positioning Using Multi-Constellation GNSS: GPS, GLONASS, Galileo and BeiDou

GEOMATICA ◽  
2016 ◽  
Vol 70 (2) ◽  
pp. 113-122 ◽  
Author(s):  
Mahmoud Abd Rabbou ◽  
Ahmed El-Rabbany
Keyword(s):  
Urban Areas ◽  
Precise Point Positioning ◽  
Cost Effective ◽  
Convergence Time ◽  
Single Frequency ◽  
Dual Frequency ◽  
Positioning Accuracy ◽  
Point Positioning ◽  
Beidou Satellites ◽  
Gnss Observations

Single-frequency precise point positioning (PPP) presents a cost-effective positioning technique for a large number of users. However, it possesses low positioning accuracy and convergence time compared with the dual-frequency PPP. Single-frequency PPP commonly employs GPS satellite systems that suffer from poor satellite geometry, especially in dense urban areas. We develop a new single-frequency PPP model that combines the observations of current GNSS constellations, including GPS, GLONASS, Galileo and Beidou. The MGEX IGS final precise products are utilized to account for the orbital and clock errors, while the IGS final global ionospheric maps (GIM) model is used to correct for the ionospheric delay. The GNSS inter-system biases are treated as additional unknowns in the estimation process. The con tri bution of the additional GNSS observations to single-frequency PPP is assessed through solution comparison with its traditional GPS-only counterpart. Various GNSS combinations are considered in the assessment, including GPS/GLONASS, GPS/Galileo, GPS/BeiDou and all-constellation GNSS. It is shown that the additional GNSS observations enhance the PPP solution accuracy and convergence time in comparison with the tra di tional GPS-only solution. Except for stations with a sufficient number of tracked BeiDou satellites, both Galileo and BeiDou have marginal effects on the positioning accuracy due to their limited number of satel lites. However, for stations with a sufficient number of visible BeiDou satellites, an average of 40% PPP accuracy improvement is obtained. The major contribution to the PPP accuracy enhancement is obtained from GLONASS satellite observations.

scholarly journals Robust INS/SFPPP-BDS tightly coupled navigation algorithm with adaptive cycle slip compensation model

2019 ◽  
Vol 13 ◽  
pp. 174830181983304
Author(s):  
Hangshuai Ma ◽  
Rong Wang ◽  
Zhi Xiong ◽  
Jianye Liu ◽  
Chuanyi Li
Keyword(s):  
Navigation System ◽  
Carrier Phase ◽  
Low Cost ◽  
Integrated System ◽  
Single Frequency ◽  
Cycle Slip ◽  
Phase Measurements ◽  
Satellite Navigation System ◽  
Tightly Coupled ◽  
Robust Adaptive

The application of Beidou Satellite Navigation System (BDS) is developing rapidly. To satisfy the increasing demand for positioning performance, single-frequency precise point positioning (SFPPP) has been a focus in recent years. By introducing the SFPPP technique into the INS/BDS integrated system, higher navigation accuracy can be obtained. Cycle slip, which is caused by signal blockage during the measurement of the carrier phase, is a challenge for SFPPP application. In the INS/SFPPP-BDS integrated system, cycle slip can cause serious bias in BDS carrier phase measurements. In this paper, a new INS/SFBDS-PPP tightly coupled navigation system and a robust adaptive filtering method are proposed. Using a low-cost single-frequency receiver integrated with INS, an observation model was built based on the pseudo range and carrier phase by PPP preprocessing. The cycle slip was introduced into the state vector to improve the estimation precision. The test statistics, comprising the innovation and its covariance, were used to estimate the time at which cycle slip occurred and its amplitude to compensate for its effect on the observation. Finally, the proposed system model and algorithm are validated by simulation.

scholarly journals Study on Multi-GNSS Precise Point Positioning Performance with Adverse Effects of Satellite Signals on Android Smartphone

Sensors ◽  
2020 ◽  
Vol 20 (22) ◽  
pp. 6447
Author(s):  
Hongyu Zhu ◽  
Linyuan Xia ◽  
Dongjin Wu ◽  
Jingchao Xia ◽  
Qianxia Li
Keyword(s):  
Adverse Effects ◽  
Precise Point Positioning ◽  
Phase Error ◽  
Three Dimensional ◽  
Satellite System ◽  
Dual Frequency ◽  
Positioning Accuracy ◽  
Noise Ratio ◽  
Point Positioning ◽  
Gnss Observations

The emergence of dual frequency global navigation satellite system (GNSS) chip actively promotes the progress of precise point positioning (PPP) technology in Android smartphones. However, some characteristics of GNSS signals on current smartphones still adversely affect the positioning accuracy of multi-GNSS PPP. In order to reduce the adverse effects on positioning, this paper takes Huawei Mate30 as the experimental object and presents the analysis of multi-GNSS observations from the aspects of carrier-to-noise ratio, cycle slip, gradual accumulation of phase error, and pseudorange residual. Accordingly, we establish a multi-GNSS PPP mathematical model that is more suitable for GNSS observations from a smartphone. The stochastic model is composed of GNSS step function variances depending on carrier-to-noise ratio, and the robust Kalman filter is applied to parameter estimation. The multi-GNSS experimental results show that the proposed PPP method can significantly reduce the effect of poor satellite signal quality on positioning accuracy. Compared with the conventional PPP model, the root mean square (RMS) of GPS/BeiDou (BDS)/GLONASS static PPP horizontal and vertical errors in the initial 10 min decreased by 23.71% and 62.06%, respectively, and the horizontal positioning accuracy reached 10 cm within 100 min. Meanwhile, the kinematic PPP maximum three-dimensional positioning error of GPS/BDS/GLONASS decreased from 16.543 to 10.317 m.

scholarly journals Variation of Static-PPP Positioning Accuracy Using GPS-Single Frequency Observations (Aswan, Egypt)

2017 ◽  
Vol 52 (2) ◽  
pp. 19-26 ◽  
Author(s):  
Ashraf Farah
Keyword(s):  
Precision Agriculture ◽  
Precise Point Positioning ◽  
Low Cost ◽  
High Accuracy ◽  
Single Frequency ◽  
Dual Frequency ◽  
Differential Gps ◽  
Positioning Accuracy ◽  
Comparable Accuracy ◽  
Positioning Technique

Abstract Precise Point Positioning (PPP) is a technique used for position computation with a high accuracy using only one GNSS receiver. It depends on highly accurate satellite position and clock data rather than broadcast ephemeries. PPP precision varies based on positioning technique (static or kinematic), observations type (single or dual frequency) and the duration of collected observations. PPP-(dual frequency receivers) offers comparable accuracy to differential GPS. PPP-single frequency receivers has many applications such as infrastructure, hydrography and precision agriculture. PPP using low cost GPS single-frequency receivers is an area of great interest for millions of users in developing countries such as Egypt. This research presents a study for the variability of single frequency static GPS-PPP precision based on different observation durations.

scholarly journals Comparison of Multi-GNSS Time and Frequency Transfer Performance Using Overlap-Frequency Observations

2021 ◽  
Vol 13 (16) ◽  
pp. 3130
Author(s):  
Pengfei Zhang ◽  
Rui Tu ◽  
Yuping Gao ◽  
Ju Hong ◽  
Junqiang Han ◽  
...  
Keyword(s):  
Carrier Phase ◽  
Satellite System ◽  
Single Frequency ◽  
Navigation Satellite ◽  
Transfer Performance ◽  
Dual Frequency ◽  
Time Transfer ◽  
Difference Series ◽  
Frequency Transfer ◽  
Global Navigation Satellite

The modernized GPS, Galileo, and BeiDou global navigation satellite system (BDS3) offers new potential for time transfer using overlap-frequency (L1/E1/B1, L5/E5a/B2a) observations. To assess the performance of time and frequency transfer with overlap-frequency observations for GPS, Galileo, and BDS3, the mathematical models of single- and dual-frequency using the carrier-phase (CP) technique are discussed and presented. For the single-frequency CP model, the three-day average RMS values of the L5/E5a/B2a clock difference series were 0.218 ns for Galileo and 0.263 ns for BDS3, of which the improvements were 36.2% for Galileo and 43.9% for BDS3 when compared with the L1/E1/B1 solution at BRUX–PTBB. For the hydrogen–cesium time link BRUX–KIRU, the RMS values of the L5/E5a/B2a solution were 0.490 ns for Galileo and 0.608 ns for BDS3, improving Galileo by 6.4% and BDS3 by 12.5% when compared with the L1/E1/B1 solution. For the dual-frequency CP model, the average stability values of the L5/E5a/B2a solution at the BRUX–PTBB time link were 3.54∙× 10−12 for GPS, 2.20 × 10−12 for Galileo, and 2.69 × 10−12 for BDS3, of which the improvements were 21.0%, 45.1%, and 52.3%, respectively, when compared with the L1/E1/B1 solution. For the BRUX–KIRU time link, the improvements were 4.2%, 30.5%, and 36.1%, respectively.

Sign in / Sign up

Export Citation Format

Share Document