scholarly journals 100 GHz Room-Temperature Laboratory Emission Spectrometer

2017 ◽  
Vol 13 (S332) ◽  
pp. 332-345 ◽  
Author(s):  
Nadine Wehres ◽  
Bettina Heyne ◽  
Frank Lewen ◽  
Marius Hermanns ◽  
Bernhard Schmidt ◽  
...  
Keyword(s):  
Room Temperature ◽  
Time Integration ◽  
Absolute Intensity ◽  
Fast Response ◽  
High Resolution Spectroscopy ◽  
Recording Time ◽  
Intensity Measurements ◽  
First Results ◽  
Long Time ◽  
Order Of Magnitude

AbstractWe present first results of a new heterodyne spectrometer dedicated to high-resolution spectroscopy of molecules of astrophysical importance. The spectrometer, based on a room-temperature heterodyne receiver, is sensitive to frequencies between 75 and 110 GHz with an instantaneous bandwidth of currently 2.5 GHz in a single sideband. The system performance, in particular the sensitivity and stability, is evaluated. Proof of concept of this spectrometer is demonstrated by recording the emission spectrum of methyl cyanide, CH3CN. Compared to state-of-the-art radio telescope receivers the instrument is less sensitive by about one order of magnitude. Nevertheless, the capability for absolute intensity measurements can be exploited in various experiments, in particular for the interpretation of the ever richer spectra in the ALMA era. The ease of operation at room-temperature allows for long time integration, the fast response time for integration in chirped pulse instruments or for recording time dependent signals. Future prospects as well as limitations of the receiver for the spectroscopy of complex organic molecules (COMs) are discussed.

Luminescence Properties of Europium-Doped Yttrium Oxides Derived from Their Dodecylsulfate-Templated Mesostructure and Nanotube Forms

2003 ◽  
Vol 775 ◽  
Author(s):  
Tsuyoshi Kijima ◽  
Kenichi Iwanaga ◽  
Tomomi Hamasuna ◽  
Shinji Mohri ◽  
Mitsunori Yada ◽  
...  
Keyword(s):  
Room Temperature ◽  
Broad Band ◽  
Concentration Quenching ◽  
Precipitation Method ◽  
Homogeneous Precipitation ◽  
Bulk Materials ◽  
Main Band ◽  
Homogeneous Precipitation Method ◽  
Order Of Magnitude ◽  
Weak Luminescence

AbstractEuropium-doped hexagonal-mesostructured and nanotubular yttrium oxides templated by dodecylsulfate species as well as surfactant free bulk oxides were synthesized by the homogeneous precipitation method. All the as grown nanostructured or bulk materials with amorphous or poorly crystalline frameworks showed weak luminescence bands at room temperature. On calcination at 1000°C these materials were converted into highly crystalline yttrium oxides, resulting in a total increase in intensity of all the bands by one order of magnitude. In the hexagonal-mesostructured system, the main band due to the 5D0-7F2 transition for the calcined phases showed a sharp but asymmetrical multiplet splitting indicating multiple Eu sites. Concentration quenching was found at a Eu content of 3 mol% or above for these phases. In contrast, the main emission for the calcined solids in the nanotubular system occurred as poorly resolved broad band and the intensity of the main band at higher Eu content was significantly enhanced compared with those for the other two systems.

Temperature Dependence of the Self-Assembled Styrene Based Random Ionomers in Aqueous Solution

2003 ◽  
Vol 775 ◽  
Author(s):  
Sung-Hwa Oh ◽  
Ju-Myung Song ◽  
Joon-Seop Kim ◽  
Hyang-Rim Oh ◽  
Jeong-A Yu
Keyword(s):  
Partition Coefficients ◽  
Room Temperature ◽  
Aqueous Media ◽  
The Self ◽  
Spectroscopic Methods ◽  
Ion Content ◽  
Repeat Units ◽  
Notable Effect ◽  
Order Of Magnitude ◽  
Experimental Errors

AbstractSolution behaviors of poly(styrene-co-sodium methacrylate) were studied by fluorescence spectroscopic methods using pyrene as a probe. The mol% of methacrylate was in the range 3.6–9.4. Water and N,N-dimethylforamide(DMF) mixture was used as a solvent (DMF/water = 0.2 mol %). The critical micelle (or aggregation) concentrations of ionomers and the partition coefficients of pyrene were obtained the temperature range 10–80°C. At room temperature, the values of CMCs (or CACs) were in the range 4.7 ×10-6 5.3 ×10-6 g/mL and we could not find any notable effect of the content of ionic repeat units within the experimental errors. Unlike CMCs, as the ion content increased, partitioning of pyrene between the hydrophobic aggregates and an aqueous media decreased from 1.5 ×105 to 9.4 ×104. As the temperature increased from 10 to 80 °C, the values of CMCs increased less than one order of magnitude. While, the partition coefficients of pyrene decreased one order of magnitude and the effect of the ion content became negligible.

scholarly journals Near-surface real-time seismic imaging using parsimonious interferometry

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sherif M. Hanafy ◽  
Hussein Hoteit ◽  
Jing Li ◽  
Gerard T. Schuster
Keyword(s):  
Fluid Flow ◽  
Real Time ◽  
Temporal Resolution ◽  
Seismic Imaging ◽  
Time Lapse ◽  
Rock Properties ◽  
Recording Time ◽  
Near Surface ◽  
Arrival Times ◽  
Order Of Magnitude

AbstractResults are presented for real-time seismic imaging of subsurface fluid flow by parsimonious refraction and surface-wave interferometry. Each subsurface velocity image inverted from time-lapse seismic data only requires several minutes of recording time, which is less than the time-scale of the fluid-induced changes in the rock properties. In this sense this is real-time imaging. The images are P-velocity tomograms inverted from the first-arrival times and the S-velocity tomograms inverted from dispersion curves. Compared to conventional seismic imaging, parsimonious interferometry reduces the recording time and increases the temporal resolution of time-lapse seismic images by more than an order-of-magnitude. In our seismic experiment, we recorded 90 sparse data sets over 4.5 h while injecting 12-tons of water into a sand dune. Results show that the percolation of water is mostly along layered boundaries down to a depth of a few meters, which is consistent with our 3D computational fluid flow simulations and laboratory experiments. The significance of parsimonious interferometry is that it provides more than an order-of-magnitude increase of temporal resolution in time-lapse seismic imaging. We believe that real-time seismic imaging will have important applications for non-destructive characterization in environmental, biomedical, and subsurface imaging.

scholarly journals Clutter Cancellation and Long Time Integration for GNSS-Based Passive Bistatic Radar

2021 ◽  
Vol 13 (4) ◽  
pp. 701 ◽  
Author(s):  
Binbin Wang ◽  
Hao Cha ◽  
Zibo Zhou ◽  
Bin Tian
Keyword(s):  
Fourier Transform ◽  
Target Detection ◽  
Time Integration ◽  
Detection Performance ◽  
Bistatic Radar ◽  
Detection Range ◽  
Robust Detection ◽  
Coherent Integration ◽  
Long Time ◽  
Long Time Integration

Clutter cancellation and long time integration are two vital steps for global navigation satellite system (GNSS)-based bistatic radar target detection. The former eliminates the influence of direct and multipath signals on the target detection performance, and the latter improves the radar detection range. In this paper, the extensive cancellation algorithm (ECA), which projects the surveillance channel signal in the subspace orthogonal to the clutter subspace, is first applied in GNSS-based bistatic radar. As a result, the clutter has been removed from the surveillance channel effectively. For long time integration, a modified version of the Fourier transform (FT), called long-time integration Fourier transform (LIFT), is proposed to obtain a high coherent processing gain. Relative acceleration (RA) is defined to describe the Doppler variation results from the motion of the target and long integration time. With the estimated RA, the Doppler frequency shift compensation is carried out in the LIFT. This method achieves a better and robust detection performance when comparing with the traditional coherent integration method. The simulation results demonstrate the effectiveness and advantages of the proposed processing method.

scholarly journals Statistical Uncertainty of DNS in Geometries without Homogeneous Directions

2021 ◽  
Vol 11 (4) ◽  
pp. 1399
Author(s):  
Jure Oder ◽  
Cédric Flageul ◽  
Iztok Tiselj
Keyword(s):  
Channel Flow ◽  
A Priori ◽  
Time Integration ◽  
Navier Stokes ◽  
Statistical Uncertainty ◽  
Time Step ◽  
Order Of Magnitude ◽  
Averaging Time ◽  
The Individual ◽  
Time Required

In this paper, we present uncertainties of statistical quantities of direct numerical simulations (DNS) with small numerical errors. The uncertainties are analysed for channel flow and a flow separation case in a confined backward facing step (BFS) geometry. The infinite channel flow case has two homogeneous directions and this is usually exploited to speed-up the convergence of the results. As we show, such a procedure reduces statistical uncertainties of the results by up to an order of magnitude. This effect is strongest in the near wall regions. In the case of flow over a confined BFS, there are no such directions and thus very long integration times are required. The individual statistical quantities converge with the square root of time integration so, in order to improve the uncertainty by a factor of two, the simulation has to be prolonged by a factor of four. We provide an estimator that can be used to evaluate a priori the DNS relative statistical uncertainties from results obtained with a Reynolds Averaged Navier Stokes simulation. In the DNS, the estimator can be used to predict the averaging time and with it the simulation time required to achieve a certain relative statistical uncertainty of results. For accurate evaluation of averages and their uncertainties, it is not required to use every time step of the DNS. We observe that statistical uncertainty of the results is uninfluenced by reducing the number of samples to the point where the period between two consecutive samples measured in Courant–Friedrichss–Levy (CFL) condition units is below one. Nevertheless, crossing this limit, the estimates of uncertainties start to exhibit significant growth.

Fast-Response X-ray Detector Based on Nanocrystalline Ga2O3 Thin Film Prepared at Room Temperature

2021 ◽  
pp. 149619
Author(s):  
Manni Chen ◽  
Zhipeng Zhang ◽  
Runze Zhan ◽  
Juncong She ◽  
Shaozhi Deng ◽  
...  
Keyword(s):  
Thin Film ◽  
Room Temperature ◽  
Fast Response ◽  
X Ray ◽  
Ga2o3 Thin Film

scholarly journals Clustering-Based Component Fraction Estimation in Solid–Liquid Two-Phase Flow in Dredging Engineering

Sensors ◽  
2020 ◽  
Vol 20 (19) ◽  
pp. 5697
Author(s):  
Chang Sun ◽  
Shihong Yue ◽  
Qi Li ◽  
Huaxiang Wang
Keyword(s):  
Clustering Algorithm ◽  
Two Phase Flow ◽  
Low Cost ◽  
Fast Response ◽  
New Method ◽  
Phase Flow ◽  
Reference Distribution ◽  
Two Phase ◽  
Long Time ◽  
Solid Liquid

Component fraction (CF) is one of the most important parameters in multiple-phase flow. Due to the complexity of the solid–liquid two-phase flow, the CF estimation remains unsolved both in scientific research and industrial application for a long time. Electrical resistance tomography (ERT) is an advanced type of conductivity detection technique due to its low-cost, fast-response, non-invasive, and non-radiation characteristics. However, when the existing ERT method is used to measure the CF value in solid–liquid two-phase flow in dredging engineering, there are at least three problems: (1) the dependence of reference distribution whose CF value is zero; (2) the size of the detected objects may be too small to be found by ERT; and (3) there is no efficient way to estimate the effect of artifacts in ERT. In this paper, we proposed a method based on the clustering technique, where a fast-fuzzy clustering algorithm is used to partition the ERT image to three clusters that respond to liquid, solid phases, and their mixtures and artifacts, respectively. The clustering algorithm does not need any reference distribution in the CF estimation. In the case of small solid objects or artifacts, the CF value remains effectively computed by prior information. To validate the new method, a group of typical CF estimations in dredging engineering were implemented. Results show that the new method can effectively overcome the limitations of the existing method, and can provide a practical and more accurate way for CF estimation.

scholarly journals A fast response, self-powered and room temperature near infrared-terahertz photodetector based on a MAPbI3/PEDOT:PSS composite

2020 ◽  
Vol 8 (35) ◽  
pp. 12148-12154 ◽  
Author(s):  
Yifan Li ◽  
Yating Zhang ◽  
Tengteng Li ◽  
Xin Tang ◽  
Mengyao Li ◽  
...  
Keyword(s):  
Response Time ◽  
Room Temperature ◽  
Near Infrared ◽  
Fast Response ◽  
Rapid Response ◽  
Self Powered

A novel self-powered NIR and THz PTE PD based on a (MAPbI3/PEDOT:PSS) composite with a rapid response time of 28 μs.

Structure and Conductivity of Iodine-Doped C60 Thin Films

1994 ◽  
Vol 359 ◽  
Author(s):  
Jun Chen ◽  
Haiyan Zhang ◽  
Baoqiong Chen ◽  
Shaoqi Peng ◽  
Ning Ke ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Room Temperature ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
Temperature Conductivity ◽  
Room Temperature Conductivity ◽  
X Ray ◽  
Thermally Activated ◽  
Order Of Magnitude

ABSTRACTWe report here the results of our study on the properties of iodine-doped C60 thin films by IR and optical absorption, X-ray diffraction, and electrical conductivity measurements. The results show that there is no apparent structural change in the iodine-doped samples at room temperature in comparison with that of the undoped films. However, in the electrical conductivity measurements, an increase of more that one order of magnitude in the room temperature conductivity has been observed in the iodine-doped samples. In addition, while the conductivity of the undoped films shows thermally activated temperature dependence, the conductivity of the iodine-doped films was found to be constant over a fairly wide temperature range (from 20°C to 70°C) exhibiting a metallic feature.

Sign in / Sign up

Export Citation Format

Share Document